[U-Boot] [PATCH v3 3/4] EXYNOS: Add SMDK5250 board support

[Minkyu Kang]

Dear Chander Kashyap,

On 11 January 2012 22:55, Chander Kashyap <chander.kashyap at linaro.org> wrote:
> SMDK5250 board is based on Samsungs EXYNOS5250 SoC.
>
> Signed-off-by: Chander Kashyap <chander.kashyap at linaro.org>
> ---
> Changes for v2:
>        - This patch is bifurcated into borad support and SoC support
>        - Fixed typo: s/EEYNOS/EXYNOS
>        - Squashed patch "SMDK5250: enable device tree support" in this.
> Changes for v3:
>        - None
>
>  MAINTAINERS                             |    1 +
>  board/samsung/smdk5250/Makefile         |   48 +++
>  board/samsung/smdk5250/lowlevel_init.S  |  528 +++++++++++++++++++++++++++
>  board/samsung/smdk5250/mem_setup.S      |  600 +++++++++++++++++++++++++++++++

Simon and Wolfgang have been commented to make these files to C.
So, What is your plan?

>  board/samsung/smdk5250/smdk5250.c       |  125 +++++++
>  board/samsung/smdk5250/smdk5250_setup.h |  589 ++++++++++++++++++++++++++++++
>  boards.cfg                              |    1 +
>  include/configs/smdk5250.h              |  185 ++++++++++
>  8 files changed, 2077 insertions(+), 0 deletions(-)
>  create mode 100644 board/samsung/smdk5250/Makefile
>  create mode 100644 board/samsung/smdk5250/lowlevel_init.S
>  create mode 100644 board/samsung/smdk5250/mem_setup.S
>  create mode 100644 board/samsung/smdk5250/smdk5250.c
>  create mode 100644 board/samsung/smdk5250/smdk5250_setup.h
>  create mode 100644 include/configs/smdk5250.h

Thanks,
Minkyu Kang.
-- 
from. prom.
www.promsoft.net