[U-Boot] [PATCH 1/2 V3] arm926: Flush the data cache before disabling it

[Albert ARIBAUD]

Hi Sughosh

Le 14/01/2012 10:21, Sughosh Ganu a écrit :
> hi Albert,
>
> On Sat Jan 14, 2012 at 10:02:16AM +0100, Albert ARIBAUD wrote:
>
> <snip>
>
>>>   	/*
>>> -	 * disable MMU stuff and caches
>>> +	 * disable MMU and D cache, and enable I cache.
>>>   	 */
>>>   	mrc	p15, 0, r0, c1, c0, 0
>>> -	bic	r0, r0, #0x00002300	/* clear bits 13, 9:8 (--V- --RS) */
>>> +	bic	r0, r0, #0x00000300	/* clear bits 9:8 ( --RS) */
>>
>> NAK--this alters the functioning of U-Boot for many boards in ways
>> unpredictable. If you want to get this specific V change into ARM,
>> then please also add code to set V in all relevant SoCs, or (better
>> yet IMO) make "do not set V in cpu_init_crit" a config option and
>> set it in the relevant SoCs or boards.
>
>    Ok, but the problem i have is that i don't have visibility into all
>    the SoC's out there -- don't know what maps where. So i think it
>    should be done by people using those specific SOC's. I can add a
>    config option, and introduce it for my board/SOC. Will that be fine.

For me it is fine: this way, you won't affect code behavior for existing 
boards.

>    In any case, i will split this patch into two, with the cache
>    flushing part kept separate, as it fixes a real issue on my
>    board. Will work out the setting of the V bit in a separate patch.

This is a good idea too.

> -sughosh

Amicalement,
-- 
Albert.