[U-Boot] [PATCH v5 2/7] arm, arm926ejs: Do cpu critical inits only for boards that require it

[Christian Riesch]

This patch reverts commit ca4b55800ed74207c35271bf7335a092d4955416
"arm, arm926ejs: always do cpu critical inits" since it impacts all
arm926ejs based configurations and caused problems, e.g., with
the hawkboard.

Instead the patch removes the CONFIG_SKIP_LOWLEVEL_INIT defines
from the board configurations that need low level initialization.

Signed-off-by: Christian Riesch <christian.riesch at omicron.at>
Cc: Albert Aribaud <albert.u.boot at aribaud.net>
Cc: Tom Rini <trini at ti.com>
Cc: Heiko Schocher <hs at denx.de>
---
 arch/arm/cpu/arm926ejs/start.S |    6 ++++--
 include/configs/cam_enc_4xx.h  |    6 ------
 include/configs/da850evm.h     |    1 -
 include/configs/enbw_cmc.h     |    1 -
 4 files changed, 4 insertions(+), 10 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S
index 6a09c02..bb4d00b 100644
--- a/arch/arm/cpu/arm926ejs/start.S
+++ b/arch/arm/cpu/arm926ejs/start.S
@@ -194,7 +194,9 @@ reset:
 	 * we do sys-critical inits only at reboot,
 	 * not when booting from ram!
 	 */
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
 	bl	cpu_init_crit
+#endif
 
 /* Set stackpointer in internal RAM to call board_init_f */
 call_board_init_f:
@@ -353,6 +355,7 @@ _dynsym_start_ofs:
  *
  *************************************************************************
  */
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
 cpu_init_crit:
 	/*
 	 * flush v4 I/D caches
@@ -371,15 +374,14 @@ cpu_init_crit:
 	orr	r0, r0, #0x00001000	/* set bit 12 (I) I-Cache */
 	mcr	p15, 0, r0, c1, c0, 0
 
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
 	/*
 	 * Go setup Memory and board specific bits prior to relocation.
 	 */
 	mov	ip, lr		/* perserve link reg across call */
 	bl	lowlevel_init	/* go setup pll,mux,memory */
 	mov	lr, ip		/* restore link */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
 	mov	pc, lr		/* back to my caller */
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
 
 #ifndef CONFIG_SPL_BUILD
 /*
diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h
index a21d448..f4fe444 100644
--- a/include/configs/cam_enc_4xx.h
+++ b/include/configs/cam_enc_4xx.h
@@ -265,12 +265,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0xc0000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x60000
 
-/*
- * U-Boot is a 3rd stage loader and if booting with spl, cpu setup is
- * done in board_init_f from c code.
- */
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
 /* for UBL header */
 #define CONFIG_SYS_UBL_BLOCK		(CONFIG_SYS_NAND_PAGE_SIZE)
 
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index fcbbace..f15a0a6 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -42,7 +42,6 @@
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
 #define CONFIG_SYS_HZ			1000
-#define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SYS_TEXT_BASE		0xc1080000
 
 /*
diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h
index c427dc7..21cf647 100644
--- a/include/configs/enbw_cmc.h
+++ b/include/configs/enbw_cmc.h
@@ -45,7 +45,6 @@
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
 #define CONFIG_SYS_HZ			1000
-#define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_DA850_LOWLEVEL
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_DA8XX_GPIO
-- 
1.7.0.4