[U-Boot] [PATCH v5] AT91SAM9*: Change kernel address in dataflash to match u-boot's size

Andreas Bießmann andreas.devel at googlemail.com
Sun Jul 1 12:34:26 CEST 2012


Dear Alexandre Belloni,

I would like to apply this to upcoming 2012.07. Unfortunately this patch
does not apply cleanly on current u-boot-atmel, please rebase and fix
some minor parts.

On 21.04.12 23:24, Alexandre Belloni wrote:
> On at91sam platforms, u-boot grew larger than the allocated size in
> dataflash, the layout was:
> bootstrap  0x00000000
> ubootenv   0x00004200
> uboot      0x00008400
> kernel     0x00042000
> 
> u-boot with the defconfig doesn't seem to fit in 0x42000 - 0x8400 =
> 0x39C00 bytes anymore.
> 
> Now, the layout is:
> bootstrap  0x00000000
> ubootenv   0x00004200
> uboot      0x00008400
> kernel     0x00084000
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni at piout.net>
> ---
> Changes for v2:
>   - changed the layout as per Marek's recommendation
> Changes for v3:
>   - prefixed the patch title with AT91SAM9*:
> Changes for v4:
>   - changed the layout again as per Ulf Samuelsson's request:
>     http://lists.denx.de/pipermail/u-boot/2012-February/118988.html
> Changes for v5:
>   - also update partition list
> 
>  board/atmel/at91sam9260ek/partition.c |    2 +-
>  board/atmel/at91sam9261ek/partition.c |    2 +-
>  board/atmel/at91sam9263ek/partition.c |    2 +-
>  board/atmel/at91sam9rlek/partition.c  |    2 +-
>  include/configs/at91sam9260ek.h       |    5 +++--
>  include/configs/at91sam9261ek.h       |    5 +++--
>  include/configs/at91sam9263ek.h       |    4 +++-
>  include/configs/at91sam9rlek.h        |    3 ++-
>  8 files changed, 15 insertions(+), 10 deletions(-)
> 

<ACK for partition stuff>

> diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
> index db52ee6..49b3386 100644
> --- a/include/configs/at91sam9260ek.h
> +++ b/include/configs/at91sam9260ek.h

<ACK for BOOTCMD stuff>

> @@ -231,6 +231,7 @@
>  #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
>  #define CONFIG_SYS_LONGHELP		1
>  #define CONFIG_CMDLINE_EDITING	1
> +#define CONFIG_AUTO_COMPLETE

please send another patch or write this change down in commit message,
separate patch preferred.

>  
>  /*
>   * Size of malloc() pool
> diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
> index 5140b26..967a4c4 100644
> --- a/include/configs/at91sam9261ek.h
> +++ b/include/configs/at91sam9261ek.h

<ACK for BOOTCMD stuff>

> @@ -233,6 +233,7 @@
>  #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
>  #define CONFIG_SYS_LONGHELP
>  #define CONFIG_CMDLINE_EDITING
> +#define CONFIG_AUTO_COMPLETE

Again, please separate patch here.

>  
>  /*
>   * Size of malloc() pool
> diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
> index 8399246..a6fe325 100644
> --- a/include/configs/at91sam9263ek.h
> +++ b/include/configs/at91sam9263ek.h
> @@ -317,7 +317,7 @@
>  #define CONFIG_ENV_OFFSET		0x4200
>  #define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
>  #define CONFIG_ENV_SIZE		0x4200
> -#define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
> +#define CONFIG_BOOTCOMMAND	"cp.b 0xC0084000 0x22000000 0x210000; bootm"
>  #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
>  				"root=/dev/mtdblock0 " \
>  				"mtdparts=atmel_nand:-(root) "\
> @@ -347,6 +347,8 @@
>  #define CONFIG_AUTO_COMPLETE
>  #define CONFIG_SYS_HUSH_PARSER
>  #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
> +#define CONFIG_AUTO_COMPLETE
> +
>  
NAK:
 a) unnecessary double blank line here
 b) CONFIG_AUTO_COMPLETE is defined some lines above
 c) does not apply cleanly, cause CONFIG_SYS_PROMPT_HUSH_PS2 was
    removed previously

>  /*
>   * Size of malloc() pool
> diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
> index 79ea1f2..6640b06 100644
> --- a/include/configs/at91sam9rlek.h
> +++ b/include/configs/at91sam9rlek.h
> @@ -156,7 +156,7 @@
>  #define CONFIG_ENV_OFFSET		0x4200
>  #define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
>  #define CONFIG_ENV_SIZE		0x4200
> -#define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
> +#define CONFIG_BOOTCOMMAND	"cp.b 0xC0084000 0x22000000 0x210000; bootm"
>  #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
>  				"root=/dev/mtdblock0 " \
>  				"mtdparts=atmel_nand:-(root) "\
> @@ -183,6 +183,7 @@
>  #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
>  #define CONFIG_SYS_LONGHELP		1
>  #define CONFIG_CMDLINE_EDITING		1
> +#define CONFIG_AUTO_COMPLETE

separate patch please.

Best regards

Andreas Bießmann


More information about the U-Boot mailing list