[U-Boot] [PATCH] mx6: Avoid writing to read-only bits in imximage.cfg

Vikram Narayanan vikram186 at gmail.com
Wed Jun 13 18:38:15 CEST 2012


Hello Marek,

On 6/13/2012 5:57 PM, Marek Vasut wrote:
> Dear Vikram Narayanan,
>
>> If in case this is valid according to the latest datasheet, ignore this
>> patch.
>>
>> --
>> According to REV C manual, the register IOMUXC_IOMUXC_GPR4 has
>> bits 4 and 5 read-only and the value is always set as zero.
>> So write '0' to these bits instead of writing '1'.
>
> I'm acking this as writing 0 to read-only bits is the only rightous thing to do.
> btw. how did you find this? Good catch, praise on you :-)

:)
In the middle of writing a imximage.cfg file for a custom mx6 board.

Regards,
Vikram


> Acked-by: Marek Vasut<marex at denx.de>
>
>> Signed-off-by: Vikram Narayanan<vikram186 at gmail.com>
>> Cc: Jason Liu<r64343 at freescale.com>
>> Cc: Dirk Behme<dirk.behme at googlemail.com>
>> ---
>>   board/freescale/mx6qarm2/imximage.cfg      |    2 +-
>>   board/freescale/mx6qsabrelite/imximage.cfg |    2 +-
>>   2 files changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/board/freescale/mx6qarm2/imximage.cfg
>> b/board/freescale/mx6qarm2/imximage.cfg index ceecbf9..bf941a3 100644
>> --- a/board/freescale/mx6qarm2/imximage.cfg
>> +++ b/board/freescale/mx6qarm2/imximage.cfg
>> @@ -167,7 +167,7 @@ DATA 4 0x020c407c 0x0F0000C3
>>   DATA 4 0x020c4080 0x000003FF
>>
>>   # enable AXI cache for VDOA/VPU/IPU
>> -DATA 4 0x020e0010 0xF00000FF
>> +DATA 4 0x020e0010 0xF00000CF
>>   # set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7
>>   DATA 4 0x020e0018 0x007F007F
>>   DATA 4 0x020e001c 0x007F007F
>> diff --git a/board/freescale/mx6qsabrelite/imximage.cfg
>> b/board/freescale/mx6qsabrelite/imximage.cfg index c389427..62498ab 100644
>> --- a/board/freescale/mx6qsabrelite/imximage.cfg
>> +++ b/board/freescale/mx6qsabrelite/imximage.cfg
>> @@ -164,7 +164,7 @@ DATA 4 0x020c407c 0x0F0000C3
>>   DATA 4 0x020c4080 0x000003FF
>>
>>   # enable AXI cache for VDOA/VPU/IPU
>> -DATA 4 0x020e0010 0xF00000FF
>> +DATA 4 0x020e0010 0xF00000CF
>>   # set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7
>>   DATA 4 0x020e0018 0x007F007F
>>   DATA 4 0x020e001c 0x007F007F
>
> Best regards,
> Marek Vasut



More information about the U-Boot mailing list