[U-Boot] [PATCH 2/4] cache_v7: Check for dcache enablement in dcache flush functions

[Sricharan R]

Hi,
[snip..]
> On 06/15/2012 07:48 AM, R, Sricharan wrote:
> > Hi,
> >
> >>> On Fri, Jun 15, 2012 at 12:31 AM, Tom Rini<trini at ti.com>  wrote:
> >>>> If we are built with D-CACHE enabled but have run 'dcache off' and
> then
> >>>> attempt to flush unaligned regions we spam the console with
> problems
> >>>> that aren't true (as the cache was off).
> >>>>
> >>>    Today we do cache maintenance operations after the dcache is
> turned off.
> >>>    One example is before jumping to kernel, we try to invalidate
> the caches,
> >>>    in cache turned off state. So with this patch those maintenance
> calls will
> >>>    do nothing, which is not correct.
> >>
> >> Ah yes,  But, shouldn't we be doing these same operations as part of
> >> turning the cache off?
> >>
> >    The problem is that while turning of dcaches, we flush it, and
> turn
> >   cache and MMU off.  But these operations are not happening
> >   automatically in a single call. So there is a chance of  valid
> >   entries present in cache even after it is OFF.
>
> I think this is what we need to fix. Otherwise, Tom's change looks good
> to me. How about an invalidate in dcache_disable() or something like
> that?
>
  Correct. So if the cleaning up sequence is fine, then ok.
  So there should be no need to check if caches are OFF inside
  the maintenance functions. Kernel does not looks like doing such checks.
  The real issue looks like we should have had assembly level functions
  to do the cleanup routines for flush-invalidate-turn OFF caches/MMU
atomically.

Thanks,
 Sricharan