[U-Boot] [PATCH 18/24] mxc_i2c.c: finish adding CONFIG_I2C_MULTI_BUS support

[Tabi Timur-B04825]

On Fri, Jun 22, 2012 at 2:41 PM, Troy Kisky
<troy.kisky at boundarydevices.com> wrote:
>
> Correct and correct. If you need i2c working before relocation, you cannot
> enable MULTI_BUS.

That sounds like a really strong limitation of MULTI_BUS.  i2c is
necessary for SPD, which is needed to initialize DDR.

-- 
Timur Tabi
Linux kernel developer at Freescale