[U-Boot] [PATCH] Atmel : usb : add EHCI driver for Atmel SoC

Marek Vasut marex at denx.de
Mon Jun 25 15:07:43 CEST 2012


Dear Bo Shen,

> Hi Marek,
> 
> On 6/25/2012 10:57, Marek Vasut wrote:
> > Dear Bo Shen,
> > 
> >> Hi Marek,
> >> 
> >> On 6/21/2012 18:17, Marek Vasut wrote:
> >>> Dear Bo Shen,
> >>> 
> >>>> Some Atmel SoC support USB EHCI, add the EHCI driver to support it.
> >>>> 
> >>>> To enable the USB EHCI, add the following configuration options into
> >>>> board relative configuration file and remove USB OHCI options.
> >>>> 
> >>>>     #define CONFIG_USB_EHCI
> >>>>     #define CONFIG_USB_EHCI_ATMEL
> >>>>     #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     2
> >>>> 
> >>>> Signed-off-by: Bo Shen<voice.shen at atmel.com>
> >>>> ---
> 
> [...]
> 
> >>> btw do you have some user for this code?
> >> 
> >> The at91sam9m10g45ek now uses OHCI, if needed, it can use EHCI. New
> >> coming boards will use EHCI.
> > 
> > When do you see such board appearing please?
> 
>    The at91sam9m10g45ek board has existed in mainline. As to AT91
> maintainer has no response, so I just send the EHCI driver separately.

I think there're some issues with the at91 maintainer. Ccing Andreas, maybe he 
can actually start picking up the atmel patches?

>    For new boards, I have submitted some patches (Please take the link
> as a reference: http://patchwork.ozlabs.org/patch/160581/), but AT91
> maintainer has no response and also, not others response.

And CCing Albert so he can pick it up. But it'd be great if you also added some 
user of this code, so it's not completely dead.

> BRs,
> Bo Shen
> 
> >>> Best regards,
> >>> Marek Vasut
> > 
> > Best regards,
> > Marek Vasut

Best regards,
Marek Vasut


More information about the U-Boot mailing list