[U-Boot] [PATCH] arm: bugfix: Move vector table before jumping relocated code

[Stephen Warren]

On 06/25/2012 06:40 AM, Tetsuyuki Kobayashi wrote:
> Interrupts and exceptions doesn't work in relocated code.
> It badly use IRQ_STACK_START_IN in rom area as interrupt stack.
> It is because the vecotr table is not moved to ram area.
> This patch moves vector table before jumping relocated code.
> 
> Signed-off-by: Tetsuyuki Kobayashi <koba at kmckk.co.jp>

CC'ing in some Tegra people.

Tetsuyuki, you probably want to CC some OMAP people too.

> ---
>  arch/arm/cpu/armv7/start.S |   12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
> index 52f7f6e..5098f7b 100644
> --- a/arch/arm/cpu/armv7/start.S
> +++ b/arch/arm/cpu/armv7/start.S
> @@ -277,6 +277,18 @@ jump_2_ram:
>  	mcr     p15, 0, r0, c7, c10, 4	@ DSB
>  	mcr     p15, 0, r0, c7, c5, 4	@ ISB
>  #endif
> +/*
> + * Move vector table
> + */
> +#if !defined(CONFIG_TEGRA2)
> +#if !(defined(CONFIG_OMAP44XX) && defined(CONFIG_SPL_BUILD))
> +	/* Set vector address in CP15 VBAR register */
> +	ldr     r0, =_start
> +	add     r0, r0, r9
> +	mcr     p15, 0, r0, c12, c0, 0  @Set VBAR
> +#endif
> +#endif /* !Tegra2 */
> +	
>  	ldr	r0, _board_init_r_ofs
>  	adr	r1, _start
>  	add	lr, r0, r1