[U-Boot] [PATCH 9/9 V2] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0

[Minkyu Kang]

On 20 June 2012 20:11, Rajeshwari Shinde <rajeshwari.s at samsung.com> wrote:
> This patch sets UART3 and MMC channle 0 for Exynos5250 Rev 1.0

Please fix typo channle -> channel.

>
> Signed-off-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
> ---
> Chnages in V2:
>        - None
>  board/samsung/smdk5250/smdk5250.c |    6 +++---
>  include/configs/smdk5250.h        |    2 +-
>  2 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c
> index 3b078da..b593325 100644
> --- a/board/samsung/smdk5250/smdk5250.c
> +++ b/board/samsung/smdk5250/smdk5250.c
> @@ -130,13 +130,13 @@ int board_mmc_init(bd_t *bis)
>  {
>        int err;
>
> -       err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);
> +       err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
>        if (err) {
> -               debug("SDMMC2 not configured\n");
> +               debug("SDMMC0 not configured\n");
>                return err;
>        }
>
> -       err = s5p_mmc_init(2, 4);
> +       err = s5p_mmc_init(0, 8);
>        return err;
>  }
>  #endif

Thanks.
Minkyu Kang.
-- 
from. prom.
www.promsoft.net