[U-Boot] [Patch v3 2/2] AT91: at91sam9m10g45ek : Enable EHCI instead OHCI

[Bo Shen]

Enable EHCI support instead OHCI

Signed-off-by: Bo Shen <voice.shen at atmel.com>
---
 include/configs/at91sam9m10g45ek.h |   20 +++-----------------
 1 file changed, 3 insertions(+), 17 deletions(-)

diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index f8b3095..1d5fc8f 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -59,17 +59,6 @@
 #define CONFIG_USART_BASE		ATMEL_BASE_DBGU
 #define	CONFIG_USART_ID			ATMEL_ID_SYS
 
-/*
- * This needs to be defined for the OHCI code to work but it is defined as
- * ATMEL_ID_UHPHS in the CPU specific header files.
- */
-#define ATMEL_ID_UHP		ATMEL_ID_UHPHS
-
-/*
- * Specify the clock enable bit in the PMC_SCER register.
- */
-#define ATMEL_PMC_UHP		AT91SAM926x_PMC_UHP
-
 /* LCD */
 #define CONFIG_LCD
 #define LCD_BPP				LCD_COLOR8
@@ -147,13 +136,10 @@
 #define CONFIG_RESET_PHY_R
 
 /* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_OHCI_NEW
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_ATMEL
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
 #define CONFIG_DOS_PARTITION
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE	ATMEL_BASE_HCI
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"at91sam9g45"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
 #define CONFIG_USB_STORAGE
 
 #define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */
-- 
1.7.9.5