[U-Boot] [SPEAr Fixes PATCH 07/11] spear: Cleanup SoC area

Vipin Kumar vipin.kumar at st.com
Fri Nov 2 18:39:46 CET 2012


- Place emi init in soc area
- Move smi and emi controller initializations to arch_cpu_init

Signed-off-by: Vipin Kumar <vipin.kumar at st.com>
---
 arch/arm/cpu/arm926ejs/spear/Makefile |  2 +
 arch/arm/cpu/arm926ejs/spear/cpu.c    | 37 +++++++++++++++-
 arch/arm/cpu/arm926ejs/spear/emi.c    | 80 +++++++++++++++++++++++++++++++++++
 arch/arm/cpu/arm926ejs/spear/spl.c    | 35 ---------------
 board/st/spear/spear_common.c         | 75 --------------------------------
 5 files changed, 118 insertions(+), 111 deletions(-)
 create mode 100644 arch/arm/cpu/arm926ejs/spear/emi.c

diff --git a/arch/arm/cpu/arm926ejs/spear/Makefile b/arch/arm/cpu/arm926ejs/spear/Makefile
index d06f03d..939f372 100644
--- a/arch/arm/cpu/arm926ejs/spear/Makefile
+++ b/arch/arm/cpu/arm926ejs/spear/Makefile
@@ -29,6 +29,8 @@ COBJS-y	:= cpu.o \
 	   reset.o \
 	   timer.o
 
+COBJS-$(CONFIG_ST_EMI) += emi.o
+
 ifdef CONFIG_SPL_BUILD
 COBJS-y	+= spl.o spl_boot.o
 COBJS-$(CONFIG_SPEAR600) += spear600.o
diff --git a/arch/arm/cpu/arm926ejs/spear/cpu.c b/arch/arm/cpu/arm926ejs/spear/cpu.c
index 311f31b..f03b2bb 100644
--- a/arch/arm/cpu/arm926ejs/spear/cpu.c
+++ b/arch/arm/cpu/arm926ejs/spear/cpu.c
@@ -22,16 +22,41 @@
  */
 
 #include <common.h>
+#include <linux/mtd/st_smi.h>
 #include <asm/io.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/misc.h>
 
+#if defined(CONFIG_ARCH_SPEAR6XX)
+static void mac_init(void)
+{
+	struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+
+	writel(readl(&misc_p->periph1_clken) & ~MISC_ETHENB,
+			&misc_p->periph1_clken);
+
+	writel(MISC_SYNTH23, &misc_p->gmac_synth_clk);
+	writel(0x0, &misc_p->gmac_ctr_reg);
+
+	writel(readl(&misc_p->periph1_clken) | MISC_ETHENB,
+			&misc_p->periph1_clken);
+
+	writel(readl(&misc_p->periph1_rst) | MISC_ETHENB,
+			&misc_p->periph1_rst);
+	writel(readl(&misc_p->periph1_rst) & ~MISC_ETHENB,
+			&misc_p->periph1_rst);
+}
+#endif
+
 int arch_cpu_init(void)
 {
 	struct misc_regs *const misc_p =
-	    (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+		(struct misc_regs *)CONFIG_SPEAR_MISCBASE;
 	u32 periph1_clken, periph_clk_cfg;
 
+#if defined(CONFIG_ARCH_SPEAR6XX)
+	mac_init();
+#endif
 	periph1_clken = readl(&misc_p->periph1_clken);
 
 #if defined(CONFIG_ARCH_SPEAR3XX)
@@ -65,6 +90,16 @@ int arch_cpu_init(void)
 #endif
 
 	writel(periph1_clken, &misc_p->periph1_clken);
+
+	/* Early driver initializations */
+#if defined(CONFIG_ST_SMI)
+	smi_init();
+#endif
+
+#ifdef CONFIG_ST_EMI
+	emi_init();
+#endif
+
 	return 0;
 }
 
diff --git a/arch/arm/cpu/arm926ejs/spear/emi.c b/arch/arm/cpu/arm926ejs/spear/emi.c
new file mode 100644
index 0000000..3a49410
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/spear/emi.c
@@ -0,0 +1,80 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar at st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/emi.h>
+
+struct cust_emi_para {
+	unsigned int tap;
+	unsigned int tsdp;
+	unsigned int tdpw;
+	unsigned int tdpr;
+	unsigned int tdcs;
+};
+
+/* EMI timing setting of m28w640hc of linux kernel */
+const struct cust_emi_para emi_timing_m28w640hc = {
+	.tap = 0x10,
+	.tsdp = 0x05,
+	.tdpw = 0x0a,
+	.tdpr = 0x0a,
+	.tdcs = 0x05,
+};
+
+/* EMI timing setting of bootrom */
+const struct cust_emi_para emi_timing_bootrom = {
+	.tap = 0xf,
+	.tsdp = 0x0,
+	.tdpw = 0xff,
+	.tdpr = 0x111,
+	.tdcs = 0x02,
+};
+
+void emi_init(void)
+{
+	const struct cust_emi_para *p = &emi_timing_m28w640hc;
+	struct emi_regs *emi_regs_p = (struct emi_regs *)CONFIG_SPEAR_EMIBASE;
+	unsigned int cs;
+	unsigned int val, tmp;
+
+	val = readl(CONFIG_SPEAR_RASBASE);
+
+	if (val & EMI_ACKMSK)
+		tmp = 0x3f;
+	else
+		tmp = 0x0;
+
+	writel(tmp, &emi_regs_p->ack);
+
+	for (cs = 0; cs < CONFIG_SYS_MAX_FLASH_BANKS; cs++) {
+		writel(p->tap, &emi_regs_p->bank_regs[cs].tap);
+		writel(p->tsdp, &emi_regs_p->bank_regs[cs].tsdp);
+		writel(p->tdpw, &emi_regs_p->bank_regs[cs].tdpw);
+		writel(p->tdpr, &emi_regs_p->bank_regs[cs].tdpr);
+		writel(p->tdcs, &emi_regs_p->bank_regs[cs].tdcs);
+		writel(EMI_CNTL_ENBBYTERW | ((val & 0x18) >> 3),
+		       &emi_regs_p->bank_regs[cs].control);
+	}
+}
diff --git a/arch/arm/cpu/arm926ejs/spear/spl.c b/arch/arm/cpu/arm926ejs/spear/spl.c
index c0e01ea..16ab82d 100644
--- a/arch/arm/cpu/arm926ejs/spear/spl.c
+++ b/arch/arm/cpu/arm926ejs/spear/spl.c
@@ -128,41 +128,6 @@ static void pll_init(void)
 		;
 }
 
-static void mac_init(void)
-{
-	struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
-
-	writel(readl(&misc_p->periph1_clken) & (~PERIPH_GMAC),
-			&misc_p->periph1_clken);
-
-	writel(SYNTH23, &misc_p->gmac_synth_clk);
-
-	switch (get_socrev()) {
-	case SOC_SPEAR600_AA:
-	case SOC_SPEAR600_AB:
-	case SOC_SPEAR600_BA:
-	case SOC_SPEAR600_BB:
-	case SOC_SPEAR600_BC:
-	case SOC_SPEAR600_BD:
-		writel(0x0, &misc_p->gmac_ctr_reg);
-		break;
-
-	case SOC_SPEAR300:
-	case SOC_SPEAR310:
-	case SOC_SPEAR320:
-		writel(0x4, &misc_p->gmac_ctr_reg);
-		break;
-	}
-
-	writel(readl(&misc_p->periph1_clken) | PERIPH_GMAC,
-			&misc_p->periph1_clken);
-
-	writel(readl(&misc_p->periph1_rst) | PERIPH_GMAC,
-			&misc_p->periph1_rst);
-	writel(readl(&misc_p->periph1_rst) & (~PERIPH_GMAC),
-			&misc_p->periph1_rst);
-}
-
 static void sys_init(void)
 {
 	struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
diff --git a/board/st/spear/spear_common.c b/board/st/spear/spear_common.c
index 71e9348..f274b6e 100644
--- a/board/st/spear/spear_common.c
+++ b/board/st/spear/spear_common.c
@@ -25,7 +25,6 @@
 #include <command.h>
 #include <i2c.h>
 #include <net.h>
-#include <linux/mtd/st_smi.h>
 #include <asm/io.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/generic.h>
@@ -48,80 +47,6 @@ int dram_init(void)
 	return 0;
 }
 
-int board_early_init_f()
-{
-#if defined(CONFIG_ST_SMI)
-	smi_init();
-#endif
-	return 0;
-}
-
-#ifdef CONFIG_SPEAR_EMI
-struct cust_emi_para {
-	unsigned int tap;
-	unsigned int tsdp;
-	unsigned int tdpw;
-	unsigned int tdpr;
-	unsigned int tdcs;
-};
-
-/* EMI timing setting of m28w640hc of linux kernel */
-const struct cust_emi_para emi_timing_m28w640hc = {
-	.tap = 0x10,
-	.tsdp = 0x05,
-	.tdpw = 0x0a,
-	.tdpr = 0x0a,
-	.tdcs = 0x05,
-};
-
-/* EMI timing setting of bootrom */
-const struct cust_emi_para emi_timing_bootrom = {
-	.tap = 0xf,
-	.tsdp = 0x0,
-	.tdpw = 0xff,
-	.tdpr = 0x111,
-	.tdcs = 0x02,
-};
-
-void spear_emi_init(void)
-{
-	const struct cust_emi_para *p = &emi_timing_m28w640hc;
-	struct emi_regs *emi_regs_p = (struct emi_regs *)CONFIG_SPEAR_EMIBASE;
-	unsigned int cs;
-	unsigned int val, tmp;
-
-	val = readl(CONFIG_SPEAR_RASBASE);
-
-	if (val & EMI_ACKMSK)
-		tmp = 0x3f;
-	else
-		tmp = 0x0;
-
-	writel(tmp, &emi_regs_p->ack);
-
-	for (cs = 0; cs < CONFIG_SYS_MAX_FLASH_BANKS; cs++) {
-		writel(p->tap, &emi_regs_p->bank_regs[cs].tap);
-		writel(p->tsdp, &emi_regs_p->bank_regs[cs].tsdp);
-		writel(p->tdpw, &emi_regs_p->bank_regs[cs].tdpw);
-		writel(p->tdpr, &emi_regs_p->bank_regs[cs].tdpr);
-		writel(p->tdcs, &emi_regs_p->bank_regs[cs].tdcs);
-		writel(EMI_CNTL_ENBBYTERW | ((val & 0x18) >> 3),
-		       &emi_regs_p->bank_regs[cs].control);
-	}
-}
-#endif
-
-int spear_board_init(ulong mach_type)
-{
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = CONFIG_BOOT_PARAMS_ADDR;
-
-#ifdef CONFIG_SPEAR_EMI
-	spear_emi_init();
-#endif
-	return 0;
-}
-
 #if defined(CONFIG_SPEAR_MACID_IN_I2CMEM) && defined(CONFIG_CMD_NET) && \
 	defined(CONFIG_CMD_I2C)
 int i2c_read_mac(uchar *buffer)
-- 
1.7.11.4



More information about the U-Boot mailing list