[U-Boot] [PATCH] mx6qsabreauto: Pass the board revision to the kernel

Fabio Estevam fabio.estevam at freescale.com
Tue Oct 2 23:20:12 CEST 2012


The kernel from Freescale expects that the bootloader passes the board revision.

Read the board revision and pass it via get_board_rev().

Without passing the board revision the kernel does not operate properly as the
initialization of peripherals are different in revA versus revB boards.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 arch/arm/include/asm/arch-mx6/imx-regs.h      |    6 ++++
 board/freescale/mx6qsabreauto/mx6qsabreauto.c |   48 +++++++++++++++++++++++--
 2 files changed, 52 insertions(+), 2 deletions(-)

diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index dc737ba..09ab010 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -200,6 +200,12 @@ struct src {
 	u32     gpr10;
 };
 
+/* OCOTP Registers */
+struct ocotp_regs {
+	u32	reserved[0x198];
+	u32	gp1;	/* 0x660 */
+};
+
 /* GPR3 bitfields */
 #define IOMUXC_GPR3_GPU_DBG_OFFSET		29
 #define IOMUXC_GPR3_GPU_DBG_MASK		(3<<IOMUXC_GPR3_GPU_DBG_OFFSET)
diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
index fcd83dc..2bc333e 100644
--- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c
+++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
@@ -30,6 +30,8 @@
 #include <fsl_esdhc.h>
 #include <miiphy.h>
 #include <netdev.h>
+#include <asm/arch/sys_proto.h>
+
 DECLARE_GLOBAL_DATA_PTR;
 
 #define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |            \
@@ -164,9 +166,38 @@ int board_eth_init(bd_t *bis)
 	return 0;
 }
 
+#define BOARD_REV_B  0x200
+#define BOARD_REV_A  0x100
+
+static int mx6sabre_rev(void)
+{
+	/*
+	 * Get Board ID information from OCOTP_GP1[15:8]
+	 * i.MX6Q ARD RevA: 0x01
+	 * i.MX6Q ARD RevB: 0x02
+	 */
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	int reg = readl(&ocotp->gp1);
+	int ret;
+
+	switch (reg >> 8 & 0x0F) {
+	case 0x02:
+		ret = BOARD_REV_B;
+		break;
+	case 0x01:
+	default:
+		ret = BOARD_REV_A;
+		break;
+	}
+
+	return ret;
+}
+
 u32 get_board_rev(void)
 {
-	return 0x63000;
+	int rev = mx6sabre_rev();
+
+	return (get_cpu_rev() & ~(0xF << 8)) | rev;
 }
 
 int board_early_init_f(void)
@@ -186,7 +217,20 @@ int board_init(void)
 
 int checkboard(void)
 {
-	puts("Board: MX6Q-Sabreauto\n");
+	int rev = mx6sabre_rev();
+	char *revname;
+
+	switch (rev) {
+	case BOARD_REV_B:
+		revname = "B";
+		break;
+	case BOARD_REV_A:
+	default:
+		revname = "A";
+		break;
+	}
+
+	printf("Board: MX6Q-Sabreauto rev%s\n", revname);
 
 	return 0;
 }
-- 
1.7.9.5




More information about the U-Boot mailing list