[U-Boot] [PATCH 1/4 v2] serial: Add Zynq serial driver

[Michal Simek]

On 09/13/2012 02:33 PM, Marek Vasut wrote:
> Dear Michal Simek,
>
>> On 09/13/2012 11:21 AM, Marek Vasut wrote:
>>> Dear Michal Simek,
>>>
>>>> The driver is used on Xilinx Zynq platform.
>>>>
>>>> Signed-off-by: Michal Simek <monstr at monstr.eu>
>>>>
>>>> ---
>>>> v2: Use Zynq name instead of Dragonfire and XPSS/XDFUART
>>>>
>>>>       Rename driver name
>>>>       Remove driver description
>>>>
>>>> ---
>>>>
>>>>    drivers/serial/Makefile      |    1 +
>>>>    drivers/serial/serial_zynq.c |  200
>>>>
>>>> ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 201
>>>> insertions(+), 0 deletions(-)
>>>>
>>>>    create mode 100644 drivers/serial/serial_zynq.c
>>>
>>> [...]
>>>
>>> It looks ok, but can you make it support CONFIG_SERIAL_MULTI right away
>>> please?
>>
>> Yes, it will add serial_multi in the next patch.
>> Can you give me your ACK or reviewed-by line? :-)
>
> Just squash them into one patch please.

Done.

Michal

-- 
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian