[U-Boot] [PATCH 11/11] RFC mx6qsabrelite: imximage.cfg: enable plugin mode

[Troy Kisky]

Don't apply this patch yet, because although u-boot
will boot, Linux won't!!!!

The other CPU's won't come online, and L2 cache
initialization crashes

Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
CPU: Testing write buffer coherency: ok
hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
CPU1: failed to come online
CPU2: failed to come online
CPU3: failed to come online
Brought up 1 CPUs
SMP: Total of 1 processors activated (1581.05 BogoMIPS).
print_constraints: dummy:
NET: Registered protocol family 16
print_constraints: vddpu: 725 <--> 1300 mV at 1100 mV fast normal
print_constraints: vddcore: 725 <--> 1300 mV at 1100 mV fast normal
print_constraints: vddsoc: 725 <--> 1300 mV at 1200 mV fast normal
print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal
print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal
print_constraints: vdd3p0: 2800 <--> 3150 mV at 3000 mV fast normal
------------ Board type Nitrogen6X/W
hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
hw-breakpoint: maximum watchpoint size is 4 bytes.
Unhandled fault: imprecise external abort (0x1c06) at 0x1d4c07b4
Internal error: : 1c06 [#1] PREEMPT SMP
Modules linked in:
CPU: 0    Not tainted  (3.0.35-1968-gd3f7f36-03060-ga3844c7 #1)
PC is at mxc_init_l2x0+0x50/0x120

Anyone have a clue?

The same thing under freescale's imx-android-r13.3
works fine. Only mainline doesn't work

Signed-off-by: Troy Kisky <troy.kisky at boundarydevices.com>
---
 board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
index eea8d3a..2af4265 100644
--- a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
+++ b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
@@ -26,7 +26,7 @@
  * The syntax is taken as close as possible with the kwbimage
  */
 #define FOR_MX6Q
-
+#define USE_PLUGIN
 #include <asm/arch/imx-mkimage.h>
 
 /* image version */
-- 
1.7.9.5