[U-Boot] [PATCH] mx6qsabresd: Add Ethernet support

[Kim Phillips]

On Wed, 19 Sep 2012 00:24:23 -0300
Fabio Estevam <festevam at gmail.com> wrote:

> From: Fabio Estevam <fabio.estevam at freescale.com>
> 
> mx6qsabresd has a AR8031 Gigabit PHY.
> 
> Add support for it. 
> 
> Also increase CONFIG_SYS_MALLOC_LEN so that FEC buffer allocation does not fail.
> 
> Tested on 1Gbp and 100Mbps networks.
> 
> Suggested-by: Kim Phillips <kim.phillips at freescale.com>
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---

Acked-by: Kim Phillips <kim.phillips at freescale.com>

Kim