[U-Boot] [PATCH V2 2/6] nand: Add SPL_NAND support to mxc_nand_spl

[Scott Wood]

On 04/21/2013 10:52:23 AM, Marek Vasut wrote:
> Add support for generic NAND SPL via the SPL framework into the
> mxc_nand_spl driver. This is basically just a simple rename and
> publication of the already implemented functions. To avoid the
> bare-bones functions getting in the way of the NAND_SPL, build
> them only if CONFIG_SPL_FRAMEWORK is not defined.
> 
> Also make sure the requested payload is aligned to full pages,
> otherwise this simple driver fails to load the last page.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Albert ARIBAUD <albert.u.boot at aribaud.net>
> Cc: Benoît Thébaudeau <benoit.thebaudeau at advansee.com>
> Cc: Fabio Estevam <fabio.estevam at freescale.com>
> Cc: Scott Wood <scottwood at freescale.com>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Tom Rini <trini at ti.com>
> ---
>  drivers/mtd/nand/mxc_nand_spl.c |   13 ++++++++++---
>  1 file changed, 10 insertions(+), 3 deletions(-)
> 
> V2: Check CONFIG_SPL_FRAMEWORK instead to test if we're building
>     with NAND_SPL or really bare-bones SPL.

Acked-by: Scott Wood <scottwood at freescale.com>

-Scott