[U-Boot] [PATCH v4 0/8] am335x: NOR support

Mark Jackson mpfj-list at newflow.co.uk
Tue Aug 13 16:57:49 CEST 2013


On 30/07/13 14:28, Tom Rini wrote:
> On Thu, Jul 18, 2013 at 03:12:57PM -0400, Tom Rini wrote:
> 
>> Hey all,
>>
>> This series adds NOR support to am335x_evm, along with a few generic
>> changes to make gpmc clearer (for per-board things like different NOR
>> chips, etc).  This series depends on the last go-round of the am335x
>> falcon mode docs as that adds the README that I add more content to.
>> And while I say this in 3/8, to be clear, I expect to drop 3/8 in favor
>> of Justin Waters' way of doing this instead, I just include this here for
>> completeness and will get it all happy together when I assemble things
>> in u-boot-ti.
>>
>> The big changes in v4 are:
>> - Apply again to master which includes a few non-trivial updates, so the
>>   linker script got re-synced.
>> - After checking what's going on, and testing with NAND again, we can be
>>   common with gpmc_cfg->irqstatus/enable, and only set documented bits
>>   in gpmc_cfg->config
> 
> Applied to u-boot-ti/master, thanks!

I'm now rebasing our NanoBone code onto the TI uboot code, but
I'm coming up with the original issue [1] of having to not check for
the R_ARM_RELATIVE relocations again.

If I patch config.mk again, the code all compiles.

I've tested "make am335x_evm_norboot" and that works.

I've attached my custom patchset ... can you tell me what I'm doing wrong ?

[1] http://lists.denx.de/pipermail/u-boot/2013-July/158592.html

Cheers
Mark J.
---
 board/newflow/nanobone/Makefile   |   38 +++++
 board/newflow/nanobone/board.c    |  295 +++++++++++++++++++++++++++++++++++
 board/newflow/nanobone/mux.c      |  195 +++++++++++++++++++++++
 board/newflow/nanobone/u-boot.lds |  110 +++++++++++++
 boards.cfg                        |    2 +
 include/configs/nanobone.h        |  308 +++++++++++++++++++++++++++++++++++++
 6 files changed, 948 insertions(+)
 create mode 100644 board/newflow/nanobone/Makefile
 create mode 100644 board/newflow/nanobone/board.c
 create mode 100644 board/newflow/nanobone/mux.c
 create mode 100644 board/newflow/nanobone/u-boot.lds
 create mode 100644 include/configs/nanobone.h

diff --git a/board/newflow/nanobone/Makefile b/board/newflow/nanobone/Makefile
new file mode 100644
index 0000000..3dbeeda
--- /dev/null
+++ b/board/newflow/nanobone/Makefile
@@ -0,0 +1,38 @@
+#
+# Makefile
+#
+# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_NOR_BOOT),y)
+COBJS	:= mux.o
+endif
+
+COBJS	+= board.o
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/newflow/nanobone/board.c b/board/newflow/nanobone/board.c
new file mode 100644
index 0000000..6ccda1b
--- /dev/null
+++ b/board/newflow/nanobone/board.c
@@ -0,0 +1,295 @@
+/*
+ * board.c
+ *
+ * Board functions for Newflow NanoBone board
+ *
+ * Copyright (C) 2013, Newflow Ltd - http://www.newflow.co.uk/
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <spl.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mem.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+#include <asm/gpio.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <cpsw.h>
+#include "board.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* NOR Flash config */
+#define NOR_CS		0
+#define NOR_BASE	0x08000000
+#define NOR_SIZE	GPMC_SIZE_128M
+static u32 gpmc_nor_config[GPMC_MAX_REG] = {
+	0x00001200,
+	0x00101000,
+	0x00030301,
+	0x10041004,
+	0x010f1010,
+	0x08070280,
+	0
+};
+
+/* FRAM config */
+#define FRAM_CS		1
+#define FRAM_BASE	0x1c000000
+#define FRAM_SIZE	GPMC_SIZE_16M
+static u32 gpmc_fram_config[GPMC_MAX_REG] = {
+	0x00001200,
+	0x00101000,
+	0x00020201,
+	0x0f030f03,
+	0x010d1010,
+	0x000301c0,
+	0
+};
+
+static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
+#if defined(CONFIG_SPL_BUILD) || (CONFIG_NOR_BOOT)
+//static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
+#endif
+
+/* MII mode defines */
+#define PORT1_MII_MODE_ENABLE	0x0
+#define PORT2_MII_MODE_ENABLE	0x0
+
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
+static const struct ddr_data ddr3_data = {
+	.datardsratio0 = MT41J128MJT125_RD_DQS,
+	.datawdsratio0 = MT41J128MJT125_WR_DQS,
+	.datafwsratio0 = MT41J128MJT125_PHY_FIFO_WE,
+	.datawrsratio0 = MT41J128MJT125_PHY_WR_DATA,
+	.datadldiff0 = PHY_DLL_LOCK_DIFF,
+};
+
+static const struct cmd_control ddr3_cmd_ctrl_data = {
+	.cmd0csratio = MT41J128MJT125_RATIO,
+	.cmd0dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
+	.cmd0iclkout = MT41J128MJT125_INVERT_CLKOUT,
+
+	.cmd1csratio = MT41J128MJT125_RATIO,
+	.cmd1dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
+	.cmd1iclkout = MT41J128MJT125_INVERT_CLKOUT,
+
+	.cmd2csratio = MT41J128MJT125_RATIO,
+	.cmd2dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
+	.cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT,
+};
+
+static struct emif_regs ddr3_emif_reg_data = {
+	.sdram_config = MT41J128MJT125_EMIF_SDCFG,
+	.ref_ctrl = MT41J128MJT125_EMIF_SDREF,
+	.sdram_tim1 = MT41J128MJT125_EMIF_TIM1,
+	.sdram_tim2 = MT41J128MJT125_EMIF_TIM2,
+	.sdram_tim3 = MT41J128MJT125_EMIF_TIM3,
+	.zq_config = MT41J128MJT125_ZQ_CFG,
+	.emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY |
+				PHY_EN_DYN_PWRDN,
+};
+
+#endif /* CONFIG_SPL_BUILD */
+
+/*
+ * early system init of muxing and clocks.
+ */
+void s_init(void)
+{
+	/*
+	 * The ROM will only have set up sufficient pinmux to allow for the
+	 * first 4KiB NOR to be read, we must finish doing what we know of
+	 * the NOR mux in this space in order to continue.
+	 */
+#ifdef CONFIG_NOR_BOOT
+	asm("stmfd      sp!, {r2 - r4}");
+	asm("movw       r4, #0x8A4");
+	asm("movw       r3, #0x44E1");
+	asm("orr        r4, r4, r3, lsl #16");
+	asm("mov        r2, #9");
+	asm("mov        r3, #8");
+	asm("gpmc_mux:  str     r2, [r4], #4");
+	asm("subs       r3, r3, #1");
+	asm("bne        gpmc_mux");
+	asm("ldmfd      sp!, {r2 - r4}");
+#endif
+
+	/*
+	 * Save the boot parameters passed from romcode.
+	 * We cannot delay the saving further than this,
+	 * to prevent overwrites.
+	 */
+#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
+	save_omap_boot_params();
+#endif
+
+	/* WDT1 is already running when the bootloader gets control
+	 * Disable it to avoid "random" resets
+	 */
+	writel(0xAAAA, &wdtimer->wdtwspr);
+	while (readl(&wdtimer->wdtwwps) != 0x0)
+		;
+	writel(0x5555, &wdtimer->wdtwspr);
+	while (readl(&wdtimer->wdtwwps) != 0x0)
+		;
+
+#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
+	/* Setup the PLLs and the clocks for the peripherals */
+	pll_init();
+
+	/* Enable RTC32K clock */
+	rtc32k_enable();
+
+	enable_board_pin_mux();
+
+	uart_soft_reset();
+
+#if defined(CONFIG_NOR_BOOT)
+	/* We want our console now. */
+	gd->baudrate = CONFIG_BAUDRATE;
+	serial_init();
+	gd->have_console = 1;
+#else
+	gd = &gdata;
+
+	preloader_console_init();
+#endif
+
+	config_ddr(303, MT41J128MJT125_IOCTRL_VALUE, &ddr3_data,
+		   &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
+
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif /* CONFIG_SPL_BUILD */
+}
+
+/*
+ * Basic board specific setup.  Pinmux has been handled already.
+ */
+int board_init(void)
+{
+	//i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+	gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
+
+	gpmc_init();
+
+	/* enable NOR flash chip select */
+	enable_gpmc_cs_config(gpmc_nor_config, &gpmc_cfg->cs[NOR_CS],
+			      NOR_BASE, NOR_SIZE);
+	/* enable FRAM chip select */
+	enable_gpmc_cs_config(gpmc_fram_config, &gpmc_cfg->cs[FRAM_CS],
+			      FRAM_BASE, FRAM_SIZE);
+
+	return 0;
+}
+
+int board_late_init(void)
+{
+	setenv("board_name", "nanobone");
+	setenv("board_rev", "0002");
+
+	return 0;
+}
+
+static void cpsw_control(int enabled)
+{
+	/* VTP can be added here */
+
+	return;
+}
+
+static struct cpsw_slave_data cpsw_slaves[] = {
+	{
+		.slave_reg_ofs	= 0x208,
+		.sliver_reg_ofs	= 0xd80,
+		.phy_id		= 0,
+		.phy_if		= PHY_INTERFACE_MODE_MII,
+	},
+	{
+		.slave_reg_ofs	= 0x308,
+		.sliver_reg_ofs	= 0xdc0,
+		.phy_id		= 1,
+		.phy_if		= PHY_INTERFACE_MODE_MII,
+	},
+};
+
+static struct cpsw_platform_data cpsw_data = {
+	.mdio_base		= CPSW_MDIO_BASE,
+	.cpsw_base		= CPSW_BASE,
+	.mdio_div		= 0xff,
+	.channels		= 8,
+	.cpdma_reg_ofs		= 0x800,
+	.slaves			= 2,
+	.slave_data		= cpsw_slaves,
+	.ale_reg_ofs		= 0xd00,
+	.ale_entries		= 1024,
+	.host_port_reg_ofs	= 0x108,
+	.hw_stats_reg_ofs	= 0x900,
+	.mac_control		= (1 << 5),
+	.control		= cpsw_control,
+	.host_port_num		= 0,
+	.version		= CPSW_CTRL_VERSION_2,
+};
+
+int board_eth_init(bd_t *bis)
+{
+	int rv, n = 0;
+	uint8_t mac_addr[6];
+	uint32_t mac_hi, mac_lo;
+
+	if (!getenv("ethaddr")) {
+		printf("<ethaddr> not set. Reading from E-fuse\n");
+		/* try reading mac address from efuse */
+		mac_lo = readl(&cdev->macid0l);
+		mac_hi = readl(&cdev->macid0h);
+		mac_addr[0] = mac_hi & 0xff;
+		mac_addr[1] = (mac_hi & 0xff00) >> 8;
+		mac_addr[2] = (mac_hi & 0xff0000) >> 16;
+		mac_addr[3] = (mac_hi & 0xff000000) >> 24;
+		mac_addr[4] = mac_lo & 0xff;
+		mac_addr[5] = (mac_lo & 0xff00) >> 8;
+
+		if (is_valid_ether_addr(mac_addr))
+			eth_setenv_enetaddr("ethaddr", mac_addr);
+	}
+
+	if (!getenv("eth1addr")) {
+		printf("<eth1addr> not set. Reading from E-fuse\n");
+		/* try reading mac address from efuse */
+		mac_lo = readl(&cdev->macid1l);
+		mac_hi = readl(&cdev->macid1h);
+		mac_addr[0] = mac_hi & 0xff;
+		mac_addr[1] = (mac_hi & 0xff00) >> 8;
+		mac_addr[2] = (mac_hi & 0xff0000) >> 16;
+		mac_addr[3] = (mac_hi & 0xff000000) >> 24;
+		mac_addr[4] = mac_lo & 0xff;
+		mac_addr[5] = (mac_lo & 0xff00) >> 8;
+
+		if (is_valid_ether_addr(mac_addr))
+			eth_setenv_enetaddr("eth1addr", mac_addr);
+	}
+
+	writel(PORT1_MII_MODE_ENABLE | PORT2_MII_MODE_ENABLE, &cdev->miisel);
+
+	rv = cpsw_register(&cpsw_data);
+	if (rv < 0)
+		printf("Error %d registering CPSW switch\n", rv);
+	else
+		n += rv;
+
+	return n;
+}
diff --git a/board/newflow/nanobone/mux.c b/board/newflow/nanobone/mux.c
new file mode 100644
index 0000000..110a4a2
--- /dev/null
+++ b/board/newflow/nanobone/mux.c
@@ -0,0 +1,195 @@
+/*
+ * mux.c
+ *
+ * Copyright (C) 2013, Newflow Ltd - http://www.newflow.co.uk/
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
+#include <asm/io.h>
+#include "board.h"
+
+static struct module_pin_mux gpmc_pin_mux[] = {
+	{OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* GPMC AD0 */
+	{OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* GPMC AD1 */
+	{OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* GPMC AD2 */
+	{OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* GPMC AD3 */
+	{OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* GPMC AD4 */
+	{OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* GPMC AD5 */
+	{OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* GPMC AD6 */
+	{OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* GPMC AD7 */
+	{OFFSET(gpmc_ad8), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* GPMC AD8 */
+	{OFFSET(gpmc_ad9), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* GPMC AD9 */
+	{OFFSET(gpmc_ad10), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* GPMC AD10 */
+	{OFFSET(gpmc_ad11), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* GPMC AD11 */
+	{OFFSET(gpmc_ad12), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* GPMC AD12 */
+	{OFFSET(gpmc_ad13), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* GPMC AD13 */
+	{OFFSET(gpmc_ad14), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* GPMC AD14 */
+	{OFFSET(gpmc_ad15), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* GPMC AD15 */
+	{OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)},	/* GPMC_CSN0 */
+	{OFFSET(gpmc_csn1), (MODE(0) | PULLUDEN)},	/* GPMC_CSN1 */
+	{OFFSET(gpmc_csn2), (MODE(0) | PULLUDEN)},	/* GPMC_CSN2 */
+	{OFFSET(gpmc_csn3), (MODE(0) | PULLUDEN)},	/* GPMC_CSN3 */
+	{OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)},	/* GPMC_ADV_ALE */
+	{OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)},	/* GPMC_OE */
+	{OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)},	/* GPMC_WEN */
+	{OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)},	/* GPMC_BE_CLE */
+	{OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE)},	/* NAND WAIT */
+	{OFFSET(lcd_data1), (MODE(1) | PULLUDDIS)},	/* GPMC A17 */
+	{OFFSET(lcd_data2), (MODE(1) | PULLUDDIS)},	/* GPMC A18 */
+	{OFFSET(lcd_data3), (MODE(1) | PULLUDDIS)},	/* GPMC A19 */
+	{OFFSET(lcd_data4), (MODE(1) | PULLUDDIS)},	/* GPMC A20 */
+	{OFFSET(lcd_data5), (MODE(1) | PULLUDDIS)},	/* GPMC A21 */
+	{OFFSET(lcd_data6), (MODE(1) | PULLUDDIS)},	/* GPMC A22 */
+	{OFFSET(lcd_data7), (MODE(1) | PULLUDDIS)},	/* GPMC A23 */
+	{OFFSET(lcd_vsync), (MODE(1) | PULLUDDIS)},	/* GPMC A24 */
+	{OFFSET(lcd_hsync), (MODE(1) | PULLUDDIS)},	/* GPMC A25 */
+	{OFFSET(lcd_pclk), (MODE(1) | PULLUDDIS)},	/* GPMC A26 */
+	{-1},
+};
+
+static struct module_pin_mux i2c0_pin_mux[] = {
+	{OFFSET(i2c0_sda), (MODE(0) | RXACTIVE |
+			PULLUDEN | SLEWCTRL)}, /* I2C_DATA */
+	{OFFSET(i2c0_scl), (MODE(0) | RXACTIVE |
+			PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */
+	{-1},
+};
+
+static struct module_pin_mux mii1_pin_mux[] = {
+	{OFFSET(mii1_col), MODE(0) | RXACTIVE},		/* MII1_COL */
+	{OFFSET(mii1_crs), MODE(0) | RXACTIVE},		/* MII1_CRS */
+	{OFFSET(mii1_rxerr), MODE(0) | RXACTIVE},	/* MII1_RXERR */
+	{OFFSET(mii1_txen), MODE(0)},			/* MII1_TXEN */
+	{OFFSET(mii1_rxdv), MODE(0) | RXACTIVE},	/* MII1_RXDV */
+	{OFFSET(mii1_txd3), MODE(0)},			/* MII1_TXD3 */
+	{OFFSET(mii1_txd2), MODE(0)},			/* MII1_TXD2 */
+	{OFFSET(mii1_txd1), MODE(0)},			/* MII1_TXD1 */
+	{OFFSET(mii1_txd0), MODE(0)},			/* MII1_TXD0 */
+	{OFFSET(mii1_txclk), MODE(0) | RXACTIVE},	/* MII1_TXCLK */
+	{OFFSET(mii1_rxclk), MODE(0) | RXACTIVE},	/* MII1_RXCLK */
+	{OFFSET(mii1_rxd3), MODE(0) | RXACTIVE},	/* MII1_RXD3 */
+	{OFFSET(mii1_rxd2), MODE(0) | RXACTIVE},	/* MII1_RXD2 */
+	{OFFSET(mii1_rxd1), MODE(0) | RXACTIVE},	/* MII1_RXD1 */
+	{OFFSET(mii1_rxd0), MODE(0) | RXACTIVE},	/* MII1_RXD0 */
+	{OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */
+	{OFFSET(mdio_clk), MODE(0) | PULLUP_EN},	/* MDIO_CLK */
+	{-1},
+};
+
+static struct module_pin_mux mii2_pin_mux[] = {
+	{OFFSET(gpmc_a0), MODE(1)},			/* MII2_TXEN */
+	{OFFSET(gpmc_a1), MODE(1) | RXACTIVE},		/* MII2_RXDV */
+	{OFFSET(gpmc_a2), MODE(1)},			/* MII2_TXD3 */
+	{OFFSET(gpmc_a3), MODE(1)},			/* MII2_TXD2 */
+	{OFFSET(gpmc_a4), MODE(1)},			/* MII2_TXD1 */
+	{OFFSET(gpmc_a5), MODE(1)},			/* MII2_TXD0 */
+	{OFFSET(gpmc_a6), MODE(1) | RXACTIVE},		/* MII2_TXCLK */
+	{OFFSET(gpmc_a7), MODE(1) | RXACTIVE},		/* MII2_RXCLK */
+	{OFFSET(gpmc_a8), MODE(1) | RXACTIVE},		/* MII2_RXD3 */
+	{OFFSET(gpmc_a9), MODE(1) | RXACTIVE},		/* MII2_RXD2 */
+	{OFFSET(gpmc_a10), MODE(1) | RXACTIVE},		/* MII2_RXD1 */
+	{OFFSET(gpmc_a11), MODE(1) | RXACTIVE},		/* MII2_RXD0 */
+	{OFFSET(gpmc_wpn), MODE(1) | RXACTIVE},		/* MII2_RXERR */
+	{OFFSET(gpmc_be1n), MODE(1) | RXACTIVE},	/* MII2_COL */
+	{OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */
+	{OFFSET(mdio_clk), MODE(0) | PULLUP_EN},	/* MDIO_CLK */
+	{-1},
+};
+
+static struct module_pin_mux mmc0_no_cd_pin_mux[] = {
+	{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT3 */
+	{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT2 */
+	{OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT1 */
+	{OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT0 */
+	{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CLK */
+	{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CMD */
+	{OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)},		/* MMC0_WP */
+	{OFFSET(emu1), (MODE(7) | RXACTIVE)},			/* MMC0_CD */
+	{-1},
+};
+
+static struct module_pin_mux uart0_pin_mux[] = {
+	{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* UART0_RXD */
+	{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},		/* UART0_TXD */
+	{-1},
+};
+
+static struct module_pin_mux uart1_pin_mux[] = {
+	{OFFSET(uart1_ctsn), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* UART1_CTSN */
+	{OFFSET(uart1_rtsn), (MODE(7) | PULLUDEN | RXACTIVE)},	/* UART1_RTSN */
+	{OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* UART1_RXD */
+	{OFFSET(uart1_txd), (MODE(0) | PULLUDEN)},		/* UART1_TXD */
+	{-1},
+};
+
+static struct module_pin_mux uart2_pin_mux[] = {
+	{OFFSET(lcd_data8), (MODE(6) | PULLUP_EN | RXACTIVE)},	/* UART2_CTSN */
+	{OFFSET(lcd_data9), (MODE(7) | PULLUDEN | RXACTIVE)},	/* UART2_RTSN */
+	{OFFSET(spi0_sclk), (MODE(1) | PULLUP_EN | RXACTIVE)},	/* UART2_RXD */
+	{OFFSET(spi0_d0), (MODE(1) | PULLUDEN)},		/* UART2_TXD */
+	{-1},
+};
+
+static struct module_pin_mux uart3_pin_mux[] = {
+	{OFFSET(lcd_data10), (MODE(6) | PULLUP_EN | RXACTIVE)},	/* UART3_CTSN */
+	{OFFSET(lcd_data11), (MODE(6) | PULLUDEN)},		/* UART3_RTSN */
+	{OFFSET(spi0_cs1), (MODE(1) | PULLUP_EN | RXACTIVE)},	/* UART3_RXD */
+	{OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)},	/* UART3_TXD */
+	{-1},
+};
+
+static struct module_pin_mux uart4_pin_mux[] = {
+	{OFFSET(lcd_data12), (MODE(6) | PULLUP_EN | RXACTIVE)},	/* UART4_CTSN */
+	{OFFSET(lcd_data13), (MODE(6) | PULLUDEN)},		/* UART4_RTSN */
+	{OFFSET(uart0_ctsn), (MODE(1) | PULLUP_EN | RXACTIVE)},	/* UART4_RXD */
+	{OFFSET(uart0_rtsn), (MODE(1) | PULLUDEN)},		/* UART4_TXD */
+	{-1},
+};
+
+static struct module_pin_mux uart5_pin_mux[] = {
+	{OFFSET(lcd_data14), (MODE(4) | PULLUP_EN | RXACTIVE)},	/* UART5_RXD */
+	{OFFSET(rmii1_refclk), (MODE(3) | PULLUDEN)},		/* UART5_TXD */
+	{-1},
+};
+
+static struct module_pin_mux usb0_pin_mux[] = {
+	{OFFSET(usb0_dm), (MODE(0) | RXACTIVE)},	/* USB0_DM */
+	{OFFSET(usb0_dp), (MODE(0) | RXACTIVE)},	/* USB0_DP */
+	{OFFSET(usb0_ce), (MODE(0) | RXACTIVE)},	/* USB0_CE */
+	{OFFSET(usb0_id), (MODE(0) | RXACTIVE)},	/* USB0_ID */
+	{OFFSET(usb0_vbus), (MODE(0) | RXACTIVE)},	/* USB0_VBUS */
+	{OFFSET(usb0_drvvbus), (MODE(0) | PULLUDEN)},	/* USB0_DRVVBUS */
+	{-1},
+};
+
+static struct module_pin_mux usb1_pin_mux[] = {
+	{OFFSET(usb1_dm), (MODE(0) | RXACTIVE)},	/* USB1_DM */
+	{OFFSET(usb1_dp), (MODE(0) | RXACTIVE)},	/* USB1_DP */
+	{OFFSET(usb1_ce), (MODE(0) | RXACTIVE)},	/* USB1_CE */
+	{OFFSET(usb1_id), (MODE(0) | RXACTIVE)},	/* USB1_ID */
+	{OFFSET(usb1_vbus), (MODE(0) | RXACTIVE)},	/* USB1_VBUS */
+	{OFFSET(usb1_drvvbus), (MODE(0) | PULLUDEN)},	/* USB1_DRVVBUS */
+	{-1},
+};
+
+void enable_board_pin_mux()
+{
+	configure_module_pin_mux(gpmc_pin_mux);
+	configure_module_pin_mux(i2c0_pin_mux);
+	configure_module_pin_mux(mii1_pin_mux);
+	configure_module_pin_mux(mii2_pin_mux);
+	configure_module_pin_mux(mmc0_no_cd_pin_mux);
+	configure_module_pin_mux(uart0_pin_mux);
+	configure_module_pin_mux(uart1_pin_mux);
+	configure_module_pin_mux(uart2_pin_mux);
+	configure_module_pin_mux(uart3_pin_mux);
+	configure_module_pin_mux(uart4_pin_mux);
+	configure_module_pin_mux(uart5_pin_mux);
+	configure_module_pin_mux(usb0_pin_mux);
+	configure_module_pin_mux(usb1_pin_mux);
+}
diff --git a/board/newflow/nanobone/u-boot.lds b/board/newflow/nanobone/u-boot.lds
new file mode 100644
index 0000000..b051b57
--- /dev/null
+++ b/board/newflow/nanobone/u-boot.lds
@@ -0,0 +1,110 @@
+/*
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj at denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text :
+	{
+		__image_copy_start = .;
+		CPUDIR/start.o (.text*)
+		board/newflow/nanobone/libnanobone.o (.text*)
+		*(.text*)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+	. = ALIGN(4);
+	.data : {
+		*(.data*)
+	}
+
+	. = ALIGN(4);
+
+	. = .;
+
+	. = ALIGN(4);
+	.u_boot_list : {
+		KEEP(*(SORT(.u_boot_list*)));
+	}
+
+	. = ALIGN(4);
+
+	__image_copy_end = .;
+
+	.rel.dyn : {
+		__rel_dyn_start = .;
+		*(.rel*)
+		__rel_dyn_end = .;
+	}
+
+	.dynsym : {
+		__dynsym_start = .;
+		*(.dynsym)
+	}
+
+	_end = .;
+
+	/*
+	 * Deprecated: this MMU section is used by pxa at present but
+	 * should not be used by new boards/CPUs.
+	 */
+	. = ALIGN(4096);
+	.mmutable : {
+		*(.mmutable)
+	}
+
+/*
+ * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
+ * __bss_base and __bss_limit are for linker only (overlay ordering)
+ */
+
+	.bss_start __rel_dyn_start (OVERLAY) : {
+		KEEP(*(.__bss_start));
+		__bss_base = .;
+	}
+
+	.bss __bss_base (OVERLAY) : {
+		*(.bss*)
+		 . = ALIGN(4);
+		 __bss_limit = .;
+	}
+
+	.bss_end __bss_limit (OVERLAY) : {
+		KEEP(*(.__bss_end));
+	}
+
+	/DISCARD/ : { *(.dynstr*) }
+	/DISCARD/ : { *(.dynamic*) }
+	/DISCARD/ : { *(.plt*) }
+	/DISCARD/ : { *(.interp*) }
+	/DISCARD/ : { *(.gnu*) }
+}
diff --git a/boards.cfg b/boards.cfg
index 211ed58..1e5ca5d 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -252,6 +252,8 @@ am335x_evm_uart4             arm         armv7       am335x              ti
 am335x_evm_uart5             arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL6,CONS_INDEX=1,NAND
 am335x_evm_usbspl            arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL1,CONS_INDEX=1,NAND,SPL_USBETH_SUPPORT
 am335x_boneblack             arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL1,CONS_INDEX=1,EMMC_BOOT
+nanobone                     arm         armv7       nanobone            newflow        am33xx      nanobone:NOR_BOOT
+nanobone_sdboot              arm         armv7       nanobone            newflow        am33xx      nanobone:SD_BOOT
 ti814x_evm                   arm         armv7       ti814x              ti             am33xx
 pcm051                       arm         armv7       pcm051              phytec         am33xx      pcm051
 sama5d3xek_mmc               arm         armv7       sama5d3xek          atmel          at91        sama5d3xek:SAMA5D3,SYS_USE_MMC
diff --git a/include/configs/nanobone.h b/include/configs/nanobone.h
new file mode 100644
index 0000000..f5da640
--- /dev/null
+++ b/include/configs/nanobone.h
@@ -0,0 +1,308 @@
+/*
+ * nanobone.h
+ *
+ * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_NANOBONE_H
+#define __CONFIG_NANOBONE_H
+
+#define CONFIG_AM33XX
+#define CONFIG_OMAP
+
+#include <asm/arch/omap.h>
+
+#define CONFIG_DMA_COHERENT
+#define CONFIG_DMA_COHERENT_SIZE	(1 << 20)
+
+#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
+#define CONFIG_SYS_MALLOC_LEN		(1024 << 10)
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
+#define CONFIG_SYS_PROMPT		"U-Boot# "
+#define CONFIG_BOARD_LATE_INIT
+#define MACH_TYPE_NANOBONE		4483
+#define CONFIG_MACH_TYPE		MACH_TYPE_NANOBONE
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_STACKSIZE		(128 * 1024)
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+/* Custom script for NOR */
+#define CONFIG_SYS_LDSCRIPT		"board/newflow/nanobone/u-boot.lds"
+
+#define CONFIG_SYS_CACHELINE_SIZE	64
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_VERSION_VARIABLE
+
+/* set to negative value for no autoboot */
+#define CONFIG_BOOTDELAY		0
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+#ifndef CONFIG_SPL_BUILD
+
+#ifdef CONFIG_SD_BOOT
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"loadaddr=0x80200000\0" \
+	"mmcdev=0\0" \
+	"bootenv=uEnv.txt\0" \
+	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+	"importbootenv=echo Importing environment from mmc ...; " \
+		"env import -t ${loadaddr} ${filesize}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+	"mtdparts default;" \
+	"if run loadbootenv; then " \
+		"echo Loaded environment from ${bootenv};" \
+		"run importbootenv;" \
+		"if test -n $uenvcmd; then " \
+			"echo Running uenvcmd ...;" \
+			"run uenvcmd;" \
+		"fi;" \
+	"fi;" \
+
+#endif /* CONFIG_SD_BOOT */
+
+#ifdef CONFIG_NOR_BOOT
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"loadaddr=0x80200000\0" \
+	"fdtaddr=0x80f80000\0" \
+	"fdt_high=0xffffffff\0" \
+	"kerneladdr=0x08100000\0"
+
+#define CONFIG_BOOTARGS \
+	"console=ttyO0,115200n8 noinitrd ip=off mem=256M " \
+	"rootwait=1 rootfstype=ubifs ubi.mtd=4,64 root=ubi0:rootfs rw " \
+	"quiet"
+
+#define CONFIG_BOOTCOMMAND \
+	"mtdparts default;" \
+	"bootm ${kerneladdr}"
+
+#endif /* CONFIG_NOR_BOOT */
+
+#endif /* CONFIG_SPL_BUILD */
+
+/* Clock Defines */
+#define V_OSCK				26000000  /* Clock output from T2 */
+#define V_SCLK				(V_OSCK)
+
+#define CONFIG_CMD_ECHO
+
+/* We set the max number of command args high to avoid HUSH bugs. */
+#define CONFIG_SYS_MAXARGS		64
+
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		512
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE \
+					+ sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+
+#undef CONFIG_CMD_MEMTEST
+
+#define CONFIG_SYS_LOAD_ADDR		0x81000000 /* Default load address */
+
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_CMD_MMC
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+
+ /* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
+#define PHYS_DRAM_1			0x80000000	/* DRAM Bank #1 */
+#define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_DRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR		(NON_SECURE_SRAM_END - \
+						GENERATED_GBL_DATA_SIZE)
+ /* Platform/Board specific defs */
+#define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
+#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ			1000	/* 1ms clock */
+
+/* NS16550 Configuration */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		(48000000)
+#define CONFIG_SYS_NS16550_COM1		0x44e09000	/* UART0 */
+#define CONFIG_SYS_NS16550_COM2		0x48022000	/* UART1 */
+#define CONFIG_SYS_NS16550_COM3		0x48024000	/* UART2 */
+#define CONFIG_SYS_NS16550_COM4		0x481a6000	/* UART3 */
+#define CONFIG_SYS_NS16550_COM5		0x481a8000	/* UART4 */
+#define CONFIG_SYS_NS16550_COM6		0x481aa000	/* UART5 */
+#define CONFIG_CONS_INDEX		1
+
+/* I2C Configuration */
+#define CONFIG_I2C
+#define CONFIG_CMD_I2C
+#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_SLAVE		1
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_DRIVER_OMAP24XX_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+
+#define CONFIG_OMAP_GPIO
+
+#define CONFIG_BAUDRATE			115200
+
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+
+/* CPU */
+#define CONFIG_ARCH_CPU_INIT
+
+#ifdef CONFIG_SD_BOOT
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+/*
+ * Place the image at the start of the ROM defined image space.
+ * We limit our size to the ROM-defined downloaded image area, and use the
+ * rest of the space for stack.
+ */
+#define CONFIG_SPL_TEXT_BASE		0x402F0400
+#define CONFIG_SPL_MAX_SIZE		(0x4030C000 - CONFIG_SPL_TEXT_BASE)
+#define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
+
+#define CONFIG_SPL_BSS_START_ADDR	0x80000000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_YMODEM_SUPPORT
+#define CONFIG_SPL_NET_SUPPORT
+#define CONFIG_SPL_NET_VCI_STRING	"AM335x U-Boot SPL"
+#define CONFIG_SPL_ETH_SUPPORT
+#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
+
+#define CONFIG_SPL_BOARD_INIT
+#endif /* CONFIG_SD_BOOT */
+
+/*
+ * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
+ * 64 bytes before this address should be set aside for u-boot.img's
+ * header. That is 0x800FFFC0--0x80100000 should not be used for any
+ * other needs.
+ */
+#ifdef CONFIG_NOR_BOOT
+#define CONFIG_SYS_TEXT_BASE		0x08000000
+#else
+#define CONFIG_SYS_TEXT_BASE		0x80800000
+#endif
+#define CONFIG_SYS_SPL_MALLOC_START	0x80a08000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
+
+/* Since SPL did pll and ddr initialization for us,
+ * we don't need to do it twice.
+ */
+#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT)
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#endif /* CONFIG_SPL_BUILD */
+
+/* Unsupported features */
+#undef CONFIG_USE_IRQ
+
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_DRIVER_TI_CPSW
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_NET_RETRY_COUNT		10
+#define CONFIG_NET_MULTI
+#define CONFIG_PHY_GIGE
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ADDR			1
+#define CONFIG_PHY_SMSC
+
+/* UBIFS support */
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+
+/* NOR support
+ *
+ * NOR Size = 128 MiB
+ * Number of Sectors/Blocks = 1024
+ * Sector Size = 128 KiB
+ * Word length = 16 bits
+ * Default layout:
+ * 0x00000000 - 0x000BFFFF : U-Boot (768 KiB)
+ * 0x000C0000 - 0x000DFFFF : First copy of U-Boot Environment (128 KiB)
+ * 0x000E0000 - 0x000FFFFF : Second copy of U-Boot Environment (128 KiB)
+ * 0x00100000 - 0x004FFFFF : Linux Kernel (4 MiB)
+ * 0x00500000 - 0x03FFFFFF : Root FS (59 MiB)
+ * 0x04000000 - 0x07FFFFFF : Data (64 MiB)
+ */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_FLASH_CFI_MTD
+#define CONFIG_SYS_MAX_FLASH_SECT	1024
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_FLASH_BASE		(0x08000000)
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
+#define CONFIG_MTD_DEVICE
+#define CONFIG_CMD_FLASH
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define MTDIDS_DEFAULT			"nor0=nor"
+#define MTDPARTS_DEFAULT		"mtdparts=nor:" \
+					"768k(u-boot)," \
+					"128k(u-boot-env1)," \
+					"128k(u-boot-env2)," \
+					"4m(kernel)," \
+					"16m(rootfs)," \
+					"43m(user)," \
+					"64m(data)"
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
+#define CONFIG_ENV_OFFSET		(768 << 10)	/* 768 KiB */
+#define CONFIG_ENV_OFFSET_REDUND	(896 << 10)	/* 896 KiB */
+
+#endif	/* ! __CONFIG_NANOBONE_H */
--
1.7.9.5



More information about the U-Boot mailing list