[U-Boot] [PATCH v5 2/4] board support of arm64

fenghua at phytium.com.cn fenghua at phytium.com.cn
Sat Aug 24 03:06:24 CEST 2013


From: David Feng <fenghua at phytium.com.cn>

Signed-off-by: David Feng <fenghua at phytium.com.cn>
---
Changes for v4:
   - No

 board/armltd/dts/vexpress64.dts      |  439 ++++++++++++++++++++++++++++++++++
 board/armltd/vexpress64/Makefile     |   43 ++++
 board/armltd/vexpress64/vexpress64.c |   79 ++++++
 boards.cfg                           |    1 +
 include/configs/vexpress_aemv8a.h    |  203 ++++++++++++++++
 5 files changed, 765 insertions(+)
 create mode 100644 board/armltd/dts/vexpress64.dts
 create mode 100644 board/armltd/vexpress64/Makefile
 create mode 100644 board/armltd/vexpress64/vexpress64.c
 create mode 100644 include/configs/vexpress_aemv8a.h

diff --git a/board/armltd/dts/vexpress64.dts b/board/armltd/dts/vexpress64.dts
new file mode 100644
index 0000000..067fea7
--- /dev/null
+++ b/board/armltd/dts/vexpress64.dts
@@ -0,0 +1,439 @@
+/*
+ * ARM Ltd. Fast Models
+ *
+ * Architecture Envelope Model (AEM) ARMv8-A
+ * ARMAEMv8AMPCT
+ *
+ * RTSM_VE_AEMv8A.lisa
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+	/* boot configurations for u-boot */
+	config {
+		/*bootdelay = <1>;*/
+		kernel-offset = <0x100000>;
+		rootdisk-offset = <0x800000>;
+		bootcmd = "bootm 0x100000 0x800000:0x2000000";
+	};
+};
+
+/ {
+	model = "RTSM_VE_AEMv8A";
+	compatible = "arm,rtsm_ve,aemv8a", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/* chosen */
+	/* generated by u-boot */
+
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu at 0 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+		};
+		cpu at 1 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+		};
+		cpu at 2 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+		};
+		cpu at 3 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+		};
+	};
+
+	memory at 80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>,
+		      <0x00000008 0x80000000 0 0x80000000>;
+	};
+
+	gic: interrupt-controller at 2c001000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x0 0x2c001000 0 0x1000>,
+		      <0x0 0x2c002000 0 0x1000>,
+		      <0x0 0x2c004000 0 0x2000>,
+		      <0x0 0x2c006000 0 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0xff01>,
+			     <1 14 0xff01>,
+			     <1 11 0xff01>,
+			     <1 10 0xff01>;
+		clock-frequency = <100000000>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <0 60 4>,
+			     <0 61 4>,
+			     <0 62 4>,
+			     <0 63 4>;
+	};
+
+	smb {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x08000000 0x04000000>,
+			 <1 0 0 0x14000000 0x04000000>,
+			 <2 0 0 0x18000000 0x04000000>,
+			 <3 0 0 0x1c000000 0x04000000>,
+			 <4 0 0 0x0c000000 0x04000000>,
+			 <5 0 0 0x10000000 0x04000000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic 0  0 4>,
+				<0 0  1 &gic 0  1 4>,
+				<0 0  2 &gic 0  2 4>,
+				<0 0  3 &gic 0  3 4>,
+				<0 0  4 &gic 0  4 4>,
+				<0 0  5 &gic 0  5 4>,
+				<0 0  6 &gic 0  6 4>,
+				<0 0  7 &gic 0  7 4>,
+				<0 0  8 &gic 0  8 4>,
+				<0 0  9 &gic 0  9 4>,
+				<0 0 10 &gic 0 10 4>,
+				<0 0 11 &gic 0 11 4>,
+				<0 0 12 &gic 0 12 4>,
+				<0 0 13 &gic 0 13 4>,
+				<0 0 14 &gic 0 14 4>,
+				<0 0 15 &gic 0 15 4>,
+				<0 0 16 &gic 0 16 4>,
+				<0 0 17 &gic 0 17 4>,
+				<0 0 18 &gic 0 18 4>,
+				<0 0 19 &gic 0 19 4>,
+				<0 0 20 &gic 0 20 4>,
+				<0 0 21 &gic 0 21 4>,
+				<0 0 22 &gic 0 22 4>,
+				<0 0 23 &gic 0 23 4>,
+				<0 0 24 &gic 0 24 4>,
+				<0 0 25 &gic 0 25 4>,
+				<0 0 26 &gic 0 26 4>,
+				<0 0 27 &gic 0 27 4>,
+				<0 0 28 &gic 0 28 4>,
+				<0 0 29 &gic 0 29 4>,
+				<0 0 30 &gic 0 30 4>,
+				<0 0 31 &gic 0 31 4>,
+				<0 0 32 &gic 0 32 4>,
+				<0 0 33 &gic 0 33 4>,
+				<0 0 34 &gic 0 34 4>,
+				<0 0 35 &gic 0 35 4>,
+				<0 0 36 &gic 0 36 4>,
+				<0 0 37 &gic 0 37 4>,
+				<0 0 38 &gic 0 38 4>,
+				<0 0 39 &gic 0 39 4>,
+				<0 0 40 &gic 0 40 4>,
+				<0 0 41 &gic 0 41 4>,
+				<0 0 42 &gic 0 42 4>;
+
+		motherboard {
+			arm,v2m-memory-map = "rs1";
+			compatible = "arm,vexpress,v2m-p1", "simple-bus";
+			#address-cells = <2>; /* SMB chipselect number and offset */
+			#size-cells = <1>;
+			#interrupt-cells = <1>;
+			ranges;
+
+			flash at 0,00000000 {
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				reg = <0 0x00000000 0x04000000>,
+				      <4 0x00000000 0x04000000>;
+				bank-width = <4>;
+			};
+
+			vram at 2,00000000 {
+				compatible = "arm,vexpress-vram";
+				reg = <2 0x00000000 0x00800000>;
+			};
+
+			ethernet at 2,02000000 {
+				compatible = "smsc,lan91c111";
+				reg = <2 0x02000000 0x10000>;
+				interrupts = <15>;
+			};
+
+			v2m_clk24mhz: clk24mhz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <24000000>;
+				clock-output-names = "v2m:clk24mhz";
+			};
+
+			v2m_refclk1mhz: refclk1mhz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <1000000>;
+				clock-output-names = "v2m:refclk1mhz";
+			};
+
+			v2m_refclk32khz: refclk32khz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <32768>;
+				clock-output-names = "v2m:refclk32khz";
+			};
+
+			iofpga at 3,00000000 {
+				compatible = "arm,amba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 3 0 0x200000>;
+
+				v2m_sysreg: sysreg at 010000 {
+					compatible = "arm,vexpress-sysreg";
+					reg = <0x010000 0x1000>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				v2m_sysctl: sysctl at 020000 {
+					compatible = "arm,sp810", "arm,primecell";
+					reg = <0x020000 0x1000>;
+					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
+					clock-names = "refclk", "timclk", "apb_pclk";
+					#clock-cells = <1>;
+					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+				};
+
+				aaci at 040000 {
+					compatible = "arm,pl041", "arm,primecell";
+					reg = <0x040000 0x1000>;
+					interrupts = <11>;
+					clocks = <&v2m_clk24mhz>;
+					clock-names = "apb_pclk";
+				};
+
+				mmci at 050000 {
+					compatible = "arm,pl180", "arm,primecell";
+					reg = <0x050000 0x1000>;
+					interrupts = <9 10>;
+					cd-gpios = <&v2m_sysreg 0 0>;
+					wp-gpios = <&v2m_sysreg 1 0>;
+					max-frequency = <12000000>;
+					vmmc-supply = <&v2m_fixed_3v3>;
+					clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+					clock-names = "mclk", "apb_pclk";
+				};
+
+				kmi at 060000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x060000 0x1000>;
+					interrupts = <12>;
+					clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				kmi at 070000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x070000 0x1000>;
+					interrupts = <13>;
+					clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				v2m_serial0: uart at 090000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x090000 0x1000>;
+					interrupts = <5>;
+					clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial1: uart at 0a0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0a0000 0x1000>;
+					interrupts = <6>;
+					clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial2: uart at 0b0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0b0000 0x1000>;
+					interrupts = <7>;
+					clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial3: uart at 0c0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0c0000 0x1000>;
+					interrupts = <8>;
+					clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				wdt at 0f0000 {
+					compatible = "arm,sp805", "arm,primecell";
+					reg = <0x0f0000 0x1000>;
+					interrupts = <0>;
+					clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>;
+					clock-names = "wdogclk", "apb_pclk";
+				};
+
+				v2m_timer01: timer at 110000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x110000 0x1000>;
+					interrupts = <2>;
+					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				v2m_timer23: timer at 120000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x120000 0x1000>;
+					interrupts = <3>;
+					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				rtc at 170000 {
+					compatible = "arm,pl031", "arm,primecell";
+					reg = <0x170000 0x1000>;
+					interrupts = <4>;
+					clocks = <&v2m_clk24mhz>;
+					clock-names = "apb_pclk";
+				};
+
+				clcd at 1f0000 {
+					compatible = "arm,pl111", "arm,primecell";
+					reg = <0x1f0000 0x1000>;
+					interrupts = <14>;
+					clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>;
+					clock-names = "clcdclk", "apb_pclk";
+				};
+			};
+
+			v2m_fixed_3v3: fixedregulator at 0 {
+				compatible = "regulator-fixed";
+				regulator-name = "3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			mcc {
+				compatible = "arm,vexpress,config-bus", "simple-bus";
+				arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+				v2m_oscclk1: osc at 1 {
+					/* CLCD clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 1>;
+					freq-range = <23750000 63500000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk1";
+				};
+
+				reset at 0 {
+					compatible = "arm,vexpress-reset";
+					arm,vexpress-sysreg,func = <5 0>;
+				};
+
+				muxfpga at 0 {
+					compatible = "arm,vexpress-muxfpga";
+					arm,vexpress-sysreg,func = <7 0>;
+				};
+
+				shutdown at 0 {
+					compatible = "arm,vexpress-shutdown";
+					arm,vexpress-sysreg,func = <8 0>;
+				};
+
+				reboot at 0 {
+					compatible = "arm,vexpress-reboot";
+					arm,vexpress-sysreg,func = <9 0>;
+				};
+
+				dvimode at 0 {
+					compatible = "arm,vexpress-dvimode";
+					arm,vexpress-sysreg,func = <11 0>;
+				};
+			};
+		};
+	};
+
+	panels {
+		panel at 0 {
+			compatible	= "panel";
+			mode		= "VGA";
+			refresh		= <60>;
+			xres		= <640>;
+			yres		= <480>;
+			pixclock	= <39721>;
+			left_margin	= <40>;
+			right_margin	= <24>;
+			upper_margin	= <32>;
+			lower_margin	= <11>;
+			hsync_len	= <96>;
+			vsync_len	= <2>;
+			sync		= <0>;
+			vmode		= "FB_VMODE_NONINTERLACED";
+			tim2		= "TIM2_BCD", "TIM2_IPC";
+			cntl		= "CNTL_LCDTFT", "CNTL_BGR", "CNTL_LCDVCOMP(1)";
+			caps		= "CLCD_CAP_5551", "CLCD_CAP_565", "CLCD_CAP_888";
+			bpp		= <16>;
+		};
+
+		panel at 1 {
+			compatible	= "panel";
+			mode		= "XVGA";
+			refresh		= <60>;
+			xres		= <1024>;
+			yres		= <768>;
+			pixclock	= <15748>;
+			left_margin	= <152>;
+			right_margin	= <48>;
+			upper_margin	= <23>;
+			lower_margin	= <3>;
+			hsync_len	= <104>;
+			vsync_len	= <4>;
+			sync		= <0>;
+			vmode		= "FB_VMODE_NONINTERLACED";
+			tim2		= "TIM2_BCD", "TIM2_IPC";
+			cntl		= "CNTL_LCDTFT", "CNTL_BGR", "CNTL_LCDVCOMP(1)";
+			caps		= "CLCD_CAP_5551", "CLCD_CAP_565", "CLCD_CAP_888";
+			bpp		= <16>;
+		};
+	};
+};
diff --git a/board/armltd/vexpress64/Makefile b/board/armltd/vexpress64/Makefile
new file mode 100644
index 0000000..77f0c3f
--- /dev/null
+++ b/board/armltd/vexpress64/Makefile
@@ -0,0 +1,43 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= vexpress64.o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c
new file mode 100644
index 0000000..4febece
--- /dev/null
+++ b/board/armltd/vexpress64/vexpress64.c
@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2013
+ * Phytium Technology, <www.phytium.com.cn>
+ * David Feng, fenghua at phytium.com.cn
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <malloc.h>
+#include <errno.h>
+#include <netdev.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = PHYS_SDRAM_1_SIZE;
+	return 0;
+}
+
+int timer_init(void)
+{
+	return 0;
+}
+
+/*
+ * Board specific reset that is system reset.
+ */
+void reset_cpu(ulong addr)
+{
+}
+
+/*
+ * Default implementation of gpio related functiuons
+ * Real implementation should be in gpio driver.
+ * fdtdec.c need this function, but currenty no gpio driver defined
+ */
+int __gpio_get_value(unsigned gpio)
+{
+	return 0;
+}
+int gpio_get_value(unsigned gpio)
+	__attribute__((weak, alias("__gpio_get_value")));
+
+void __gpio_set_value(unsigned gpio, int vlaue)
+{
+	return;
+}
+void gpio_set_value(unsigned gpio, int vlaue)
+	__attribute__((weak, alias("__gpio_set_value")));
+
+void __gpio_request(unsigned gpio, const char *label)
+{
+	return;
+}
+void gpio_request(unsigned gpio, const char *label)
+	__attribute__((weak, alias("__gpio_request")));
diff --git a/boards.cfg b/boards.cfg
index 4b1f960..85a92a0 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -1196,5 +1196,6 @@ gr_ep2s60                    sparc       leon3       -                   gaisler
 grsim                        sparc       leon3       -                   gaisler
 gr_xc3s_1500                 sparc       leon3       -                   gaisler
 coreboot-x86                 x86         x86        coreboot            chromebook-x86 coreboot    coreboot:SYS_TEXT_BASE=0x01110000
+vexpress_aemv8a              arm         armv8       vexpress64          armltd         -           vexpress_aemv8a:ARMV8
 # Target                     ARCH        CPU         Board name          Vendor	        SoC         Options
 ########################################################################################################################
diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
new file mode 100644
index 0000000..d207d00
--- /dev/null
+++ b/include/configs/vexpress_aemv8a.h
@@ -0,0 +1,203 @@
+/*
+ * Configuration for Versatile Express. Parts were derived from other ARM
+ *   configurations.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __VEXPRESS_AEMV8A_H
+#define __VEXPRESS_AEMV8A_H
+
+#define DEBUG
+
+/* #define CONFIG_SYS_GENERIC_BOARD */
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_SUPPORT_RAW_INITRD
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+/* Cache Definitions */
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_ICACHE_OFF
+
+#define CONFIG_IDENT_STRING		" vexpress_aemv8a"
+#define CONFIG_BOOTP_VCI_STRING    	"U-boot.armv8.vexpress_aemv8a"
+
+/* Link Definitions */
+#define CONFIG_SYS_TEXT_BASE		0x80000000
+#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x400000)
+
+/* Flat Device Tree Definitions */
+#define CONFIG_OF_EMBED
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_LIBFDT
+
+#define CONFIG_DEFAULT_DEVICE_TREE	vexpress64
+
+/* SMP Definitions */
+#define SECONDARY_CPU_MAILBOX		0x8000fff8
+
+/* CS register bases for the original memory map. */
+#define V2M_PA_CS0			0x00000000
+#define V2M_PA_CS1			0x14000000
+#define V2M_PA_CS2			0x18000000
+#define V2M_PA_CS3			0x1c000000
+#define V2M_PA_CS4			0x0c000000
+#define V2M_PA_CS5			0x10000000
+
+#define V2M_PERIPH_OFFSET(x)		(x << 16)
+#define V2M_SYSREGS			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(1))
+#define V2M_SYSCTL			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(2))
+#define V2M_SERIAL_BUS_PCI		(V2M_PA_CS3 + V2M_PERIPH_OFFSET(3))
+
+#define V2M_BASE			0x80000000
+
+/*
+ * Physical addresses, offset from V2M_PA_CS0-3
+ */
+#define V2M_NOR0			(V2M_PA_CS0)
+#define V2M_NOR1			(V2M_PA_CS4)
+#define V2M_SRAM			(V2M_PA_CS1)
+
+/* Common peripherals relative to CS7. */
+#define V2M_AACI			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(4))
+#define V2M_MMCI			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(5))
+#define V2M_KMI0			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
+#define V2M_KMI1			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))
+
+#define V2M_UART0			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
+#define V2M_UART1			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
+#define V2M_UART2			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
+#define V2M_UART3			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))
+
+#define V2M_WDT				(V2M_PA_CS3 + V2M_PERIPH_OFFSET(15))
+
+#define V2M_TIMER01			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(17))
+#define V2M_TIMER23			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(18))
+
+#define V2M_SERIAL_BUS_DVI		(V2M_PA_CS3 + V2M_PERIPH_OFFSET(22))
+#define V2M_RTC				(V2M_PA_CS3 + V2M_PERIPH_OFFSET(23))
+
+#define V2M_CF				(V2M_PA_CS3 + V2M_PERIPH_OFFSET(26))
+
+#define V2M_CLCD			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(31))
+
+/* System register offsets. */
+#define V2M_SYS_CFGDATA			(V2M_SYSREGS + 0x0a0)
+#define V2M_SYS_CFGCTRL			(V2M_SYSREGS + 0x0a4)
+#define V2M_SYS_CFGSTAT			(V2M_SYSREGS + 0x0a8)
+
+/* Generic Timer Definitions */
+#define CONFIG_SYS_CNTFRQ		(0x1800000)	/* 24MHz */
+
+/* Generic Interrupt Controller Definitions */
+#define GIC_DIST_BASE			(0x2C001000)
+#define GIC_CPU_BASE			(0x2C002000)
+
+#define CONFIG_SYS_MEMTEST_START	V2M_BASE
+#define CONFIG_SYS_MEMTEST_END		(V2M_BASE + 0x80000000)
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)
+
+/* PL011 Serial Configuration */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK		24000000
+#define CONFIG_PL01x_PORTS		{(void *)CONFIG_SYS_SERIAL0, \
+					 (void *)CONFIG_SYS_SERIAL1}
+#define CONFIG_CONS_INDEX		0
+
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_SERIAL0		V2M_UART0
+#define CONFIG_SYS_SERIAL1		V2M_UART1
+
+/* Command line configuration */
+#define CONFIG_MENU
+//#define CONFIG_MENU_SHOW
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PXE
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_SOURCE
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+/* BOOTP options */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_PXE
+#define CONFIG_BOOTP_PXE_CLIENTARCH	0x100
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LOAD_ADDR		(V2M_BASE + 0x10000000)	/* load address */
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM_1			(V2M_BASE)	/* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE		0x80000000	/* 2048 MB */
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+
+#define CONFIG_SYS_HZ			1000
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS	\
+					"loadaddr=0x80100000\0"		\
+					"kernel_addr=0x100000\0"	\
+					"ramdisk_addr=0x800000\0"	\
+					"ramdisk_size=0x2000000\0"	\
+					"fdt_high=0xa0000000\0"		\
+					"console=ttyAMA0,38400n8\0"
+
+#define CONFIG_BOOTARGS			"console=ttyAMA0 root=/dev/ram0"
+#define CONFIG_BOOTCOMMAND		"bootm $kernel_addr $ramdisk_addr:$ramdisk_size"
+#define CONFIG_BOOTDELAY		-1
+
+/* Store environment at top of flash */
+#define CONFIG_ENV_IS_NOWHERE		1
+#define CONFIG_ENV_SIZE			0x1000
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PROMPT		"VExpress# "
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot args buffer */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING		1
+#define CONFIG_SYS_MAXARGS		64	/* max command args */
+
+#endif /* __VEXPRESS_AEMV8A_H */
-- 
1.7.9.5




More information about the U-Boot mailing list