[U-Boot] Please pull u-boot-ti/master, v2

[Albert ARIBAUD]

Hi Tom,

On Fri, 6 Dec 2013 07:15:25 -0500, Tom Rini <trini at ti.com> wrote:

> Hey,
> 
> The following changes since commit 4c54419737ffbfadd605263d97a1357bb03c04e8:
> 
>   socfpga: Adding Freeze Controller driver (2013-12-03 14:38:56 +0100)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-ti.git master
> 
> for you to fetch changes up to 18a02e8050b7af165efa72325753e7880bf5567c:
> 
>   AM3517 EVM: Enable ethernet (2013-12-06 07:04:26 -0500)
> 
> ----------------------------------------------------------------
> Hardik Patel (1):
>       pandaboard: 1/1] ARM:OMAP4+: panda-es: Support Rev B3 Elpida DDR2 RAM
> 
> Ilya Ledvich (3):
>       cm_t335: add cm_t335 board support
>       cm_t335: add support for status LED
>       cm_t335: add support for pca9555 i2c gpio extender
> 
> Lars Poeschel (1):
>       pcm051: Support for revision 3
> 
> Lokesh Vutla (1):
>       ARM: OMAP5+: Remove unnecessary EFUSE settings
> 
> Lubomir Popov (1):
>       ARM: OMAP4: Fix bug in omap4470_volts struct
> 
> Michael Trimarchi (2):
>       arm: omap3: Add uart4 omap3 adddress
>       arm: omap3: Enable clocks for peripherals only if they are used
> 
> Oleg Kosheliev (2):
>       ARMV7: OMAP4: Add struct for twl603x data
>       ARMV7: OMAP4: Add twl6032 support
> 
> Roger Quadros (11):
>       ahci: Error out with message on malloc() failure
>       ahci: Fix cache align error messages
>       ARM: OMAP5: Add Pipe3 PHY driver
>       ARM: OMAP5: Add PRCM and Control information for SATA
>       ARM: OMAP5: Add SATA platform glue
>       ARM: omap5_uevm: Add SATA support
>       ARM: DRA7xx: Add PRCM and Control information for SATA
>       ARM: dra7_evm: Add SATA support
>       usb: ehci-omap: Reset the USB Host OMAP module
>       omap3_beagle: Don't use ulpi_reset
>       omap4_panda: Don't use ulpi_reset
> 
> SRICHARAN R (3):
>       ARM: DRA7: Add is_dra7xx cpu check definition
>       ARM: DRA: EMIF: Change DDR3 settings to use hw leveling
>       ARM: DRA7/OMAP5: EMIF: Add workaround for bug 0039
> 
> Stefan Roese (1):
>       arm: am335x: Add DT (FDT) support to Siemens boards
> 
> Tom Rini (3):
>       am33xx: Stop modifying certain EMIF4D registers
>       am335x_evm: Update nandboot to use partitions and DT
>       AM3517 EVM: Enable ethernet
> 
> Viktar Palstsiuk (1):
>       davinci: fix Master Priority Registers location
> 
> Vladimir Koutny (1):
>       am335x: cpsw: optimize cpsw_recv to increase network performance
> 
>  arch/arm/cpu/armv7/am33xx/ddr.c              |    7 -
>  arch/arm/cpu/armv7/omap-common/Makefile      |    5 +
>  arch/arm/cpu/armv7/omap-common/emif-common.c |  142 ++++++++++++----
>  arch/arm/cpu/armv7/omap-common/pipe3-phy.c   |  231 ++++++++++++++++++++++++++
>  arch/arm/cpu/armv7/omap-common/pipe3-phy.h   |   36 ++++
>  arch/arm/cpu/armv7/omap-common/sata.c        |   75 +++++++++
>  arch/arm/cpu/armv7/omap3/clock.c             |    2 -
>  arch/arm/cpu/armv7/omap4/hw_data.c           |   12 +-
>  arch/arm/cpu/armv7/omap4/sdram_elpida.c      |    9 +-
>  arch/arm/cpu/armv7/omap5/hw_data.c           |    9 +-
>  arch/arm/cpu/armv7/omap5/hwinit.c            |   18 +-
>  arch/arm/cpu/armv7/omap5/prcm-regs.c         |    7 +
>  arch/arm/cpu/armv7/omap5/sdram.c             |  214 +++++++++++++++++-------
>  arch/arm/include/asm/arch-am33xx/ddr_defs.h  |   37 ++---
>  arch/arm/include/asm/arch-davinci/hardware.h |    3 +-
>  arch/arm/include/asm/arch-omap3/clock.h      |    2 -
>  arch/arm/include/asm/arch-omap3/omap3.h      |    1 +
>  arch/arm/include/asm/arch-omap4/sys_proto.h  |    4 +
>  arch/arm/include/asm/arch-omap5/clock.h      |    3 +
>  arch/arm/include/asm/arch-omap5/omap.h       |    4 +
>  arch/arm/include/asm/arch-omap5/sata.h       |   48 ++++++
>  arch/arm/include/asm/emif.h                  |   14 +-
>  arch/arm/include/asm/omap_common.h           |   10 ++
>  board/compulab/cm_t335/Makefile              |   10 ++
>  board/compulab/cm_t335/cm_t335.c             |  162 ++++++++++++++++++
>  board/compulab/cm_t335/mux.c                 |  117 +++++++++++++
>  board/compulab/cm_t335/spl.c                 |  106 ++++++++++++
>  board/compulab/cm_t335/u-boot.lds            |  101 +++++++++++
>  board/isee/igep0033/board.c                  |    4 -
>  board/phytec/pcm051/board.c                  |   53 ++++--
>  board/siemens/dxr2/board.c                   |    4 -
>  board/siemens/pxm2/board.c                   |    5 -
>  board/siemens/rut/board.c                    |    5 -
>  board/ti/am335x/board.c                      |   17 --
>  board/ti/dra7xx/evm.c                        |    7 +
>  board/ti/omap5_uevm/evm.c                    |    7 +
>  board/ti/panda/panda.c                       |   60 +++++++
>  board/ti/ti814x/evm.c                        |    5 -
>  board/ti/ti816x/evm.c                        |   17 --
>  boards.cfg                                   |    4 +-
>  drivers/block/ahci.c                         |   18 +-
>  drivers/net/cpsw.c                           |    2 +-
>  drivers/power/twl6030.c                      |   77 +++++++--
>  drivers/usb/host/ehci-omap.c                 |   57 +++++--
>  include/configs/am335x_evm.h                 |    9 +-
>  include/configs/am3517_evm.h                 |   14 +-
>  include/configs/cm_t335.h                    |  182 ++++++++++++++++++++
>  include/configs/dra7xx_evm.h                 |   11 ++
>  include/configs/omap3_beagle.h               |    3 -
>  include/configs/omap4_panda.h                |    3 -
>  include/configs/omap5_uevm.h                 |   10 ++
>  include/configs/siemens-am33x-common.h       |    5 +
>  include/twl6030.h                            |   38 +++++
>  53 files changed, 1745 insertions(+), 261 deletions(-)
>  create mode 100644 arch/arm/cpu/armv7/omap-common/pipe3-phy.c
>  create mode 100644 arch/arm/cpu/armv7/omap-common/pipe3-phy.h
>  create mode 100644 arch/arm/cpu/armv7/omap-common/sata.c
>  create mode 100644 arch/arm/include/asm/arch-omap5/sata.h
>  create mode 100644 board/compulab/cm_t335/Makefile
>  create mode 100644 board/compulab/cm_t335/cm_t335.c
>  create mode 100644 board/compulab/cm_t335/mux.c
>  create mode 100644 board/compulab/cm_t335/spl.c
>  create mode 100644 board/compulab/cm_t335/u-boot.lds
>  create mode 100644 include/configs/cm_t335.h
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.