[U-Boot] [PATCH 2/2] beagle: expansion boards: add LSR COM6L adapter

[Robert Nelson]

http://www.lsr.com/wireless-products/com6l

The eeprom on this expansion board requires 16bit addressing.

Signed-off-by: Robert Nelson <robertcnelson at gmail.com>
---
 board/ti/beagle/beagle.c |    6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index 9493c6b..58bd556 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -72,6 +72,7 @@
 #define BBTOYS_LCD			0x03000B00
 #define BCT_BRETTL3			0x01000F00
 #define BCT_BRETTL4			0x02000F00
+#define LSR_COM6L_ADPT			0x01001300
 #define BEAGLE_NO_EEPROM		0xffffffff
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -462,6 +463,11 @@ int misc_init_r(void)
 	case BCT_BRETTL4:
 		printf("Recognized bct electronic GmbH brettl4 board\n");
 		break;
+	case LSR_COM6L_ADPT:
+		printf("Recognized LSR COM6L Adapter Board\n");
+		MUX_BBTOYS_WIFI()
+		setenv("buddy", "lsr-com6l-adpt");
+		break;
 	case BEAGLE_NO_EEPROM:
 		printf("No EEPROM on expansion board\n");
 		setenv("buddy", "none");
-- 
1.7.10.4