[U-Boot] [PATCH 15/18] mxs: Add MX23 quirks into the clock code

Marek Vasut marex at denx.de
Fri Jan 11 14:19:15 CET 2013


From: Otavio Salvador <otavio at ossystems.com.br>

The MX23 has different handling of the SSP clock and GPMI NAND clock sources,
add necessary quirks into the clock code to properly handle these.

Signed-off-by: Marek Vasut <marex at denx.de>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
Cc: Fabio Estevam <fabio.estevam at freescale.com>
Cc: Stefano Babic <sbabic at denx.de>
---
 arch/arm/cpu/arm926ejs/mxs/clock.c    |   44 +++++++++++++++++++++++++--------
 arch/arm/include/asm/arch-mxs/clock.h |    8 ++++--
 2 files changed, 40 insertions(+), 12 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/mxs/clock.c b/arch/arm/cpu/arm926ejs/mxs/clock.c
index b7cf98f..2df7ec6 100644
--- a/arch/arm/cpu/arm926ejs/mxs/clock.c
+++ b/arch/arm/cpu/arm926ejs/mxs/clock.c
@@ -1,5 +1,5 @@
 /*
- * Freescale i.MX28 clock setup code
+ * Freescale i.MX23/i.MX28 clock setup code
  *
  * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
  * on behalf of DENX Software Engineering GmbH
@@ -32,15 +32,24 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/imx-regs.h>
 
-/* The PLL frequency is always 480MHz, see section 10.2 in iMX28 datasheet. */
+/*
+ * The PLL frequency is 480MHz and XTAL frequency is 24MHz
+ *   iMX23: datasheet section 4.2
+ *   iMX28: datasheet section 10.2
+ */
 #define	PLL_FREQ_KHZ	480000
 #define	PLL_FREQ_COEF	18
-/* The XTAL frequency is always 24MHz, see section 10.2 in iMX28 datasheet. */
 #define	XTAL_FREQ_KHZ	24000
 
 #define	PLL_FREQ_MHZ	(PLL_FREQ_KHZ / 1000)
 #define	XTAL_FREQ_MHZ	(XTAL_FREQ_KHZ / 1000)
 
+#if defined(CONFIG_MX23)
+#define MXC_SSPCLK_MAX MXC_SSPCLK0
+#elif defined(CONFIG_MX28)
+#define MXC_SSPCLK_MAX MXC_SSPCLK3
+#endif
+
 static uint32_t mxs_get_pclk(void)
 {
 	struct mxs_clkctrl_regs *clkctrl_regs =
@@ -120,10 +129,17 @@ static uint32_t mxs_get_gpmiclk(void)
 {
 	struct mxs_clkctrl_regs *clkctrl_regs =
 		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
-
+#if defined(CONFIG_MX23)
+	uint8_t *reg =
+		&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_CPU];
+#elif defined(CONFIG_MX28)
+	uint8_t *reg =
+		&clkctrl_regs->hw_clkctrl_frac1[CLKCTRL_FRAC1_GPMI];
+#endif
 	uint32_t clkctrl, clkseq, div;
 	uint8_t clkfrac, frac;
 
+
 	clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq);
 	clkctrl = readl(&clkctrl_regs->hw_clkctrl_gpmi);
 
@@ -134,7 +150,7 @@ static uint32_t mxs_get_gpmiclk(void)
 	}
 
 	/* REF Path */
-	clkfrac = readb(&clkctrl_regs->hw_clkctrl_frac1[CLKCTRL_FRAC1_GPMI]);
+	clkfrac = readb(reg);
 	frac = clkfrac & CLKCTRL_FRAC_FRAC_MASK;
 	div = clkctrl & CLKCTRL_GPMI_DIV_MASK;
 	return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div;
@@ -203,7 +219,7 @@ void mxs_set_sspclk(enum mxs_sspclock ssp, uint32_t freq, int xtal)
 		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
 	uint32_t clk, clkreg;
 
-	if (ssp > MXC_SSPCLK3)
+	if (ssp > MXC_SSPCLK_MAX)
 		return;
 
 	clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) +
@@ -248,7 +264,7 @@ static uint32_t mxs_get_sspclk(enum mxs_sspclock ssp)
 	uint32_t clkreg;
 	uint32_t clk, tmp;
 
-	if (ssp > MXC_SSPCLK3)
+	if (ssp > MXC_SSPCLK_MAX)
 		return 0;
 
 	tmp = readl(&clkctrl_regs->hw_clkctrl_clkseq);
@@ -273,8 +289,14 @@ static uint32_t mxs_get_sspclk(enum mxs_sspclock ssp)
  */
 void mxs_set_ssp_busclock(unsigned int bus, uint32_t freq)
 {
+#if defined(CONFIG_MX23)
+	const unsigned int clkbus = 0;
+#elif defined(CONFIG_MX28)
+	const unsigned int clkbus = bus;
+#endif
+
 	struct mxs_ssp_regs *ssp_regs;
-	const uint32_t sspclk = mxs_get_sspclk(bus);
+	const uint32_t sspclk = mxs_get_sspclk(clkbus);
 	uint32_t reg;
 	uint32_t divide, rate, tgtclk;
 
@@ -325,16 +347,18 @@ uint32_t mxc_get_clock(enum mxc_clock clk)
 		return mxs_get_ioclk(MXC_IOCLK0);
 	case MXC_IO1_CLK:
 		return mxs_get_ioclk(MXC_IOCLK1);
+	case MXC_XTAL_CLK:
+		return XTAL_FREQ_KHZ * 1000;
 	case MXC_SSP0_CLK:
 		return mxs_get_sspclk(MXC_SSPCLK0);
+#ifdef CONFIG_MX28
 	case MXC_SSP1_CLK:
 		return mxs_get_sspclk(MXC_SSPCLK1);
 	case MXC_SSP2_CLK:
 		return mxs_get_sspclk(MXC_SSPCLK2);
 	case MXC_SSP3_CLK:
 		return mxs_get_sspclk(MXC_SSPCLK3);
-	case MXC_XTAL_CLK:
-		return XTAL_FREQ_KHZ * 1000;
+#endif
 	}
 
 	return 0;
diff --git a/arch/arm/include/asm/arch-mxs/clock.h b/arch/arm/include/asm/arch-mxs/clock.h
index d3927c7..3f7d3f0 100644
--- a/arch/arm/include/asm/arch-mxs/clock.h
+++ b/arch/arm/include/asm/arch-mxs/clock.h
@@ -1,5 +1,5 @@
 /*
- * Freescale i.MX28 Clock
+ * Freescale i.MX23/i.MX28 Clock
  *
  * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
  * on behalf of DENX Software Engineering GmbH
@@ -31,11 +31,13 @@ enum mxc_clock {
 	MXC_GPMI_CLK,
 	MXC_IO0_CLK,
 	MXC_IO1_CLK,
+	MXC_XTAL_CLK,
 	MXC_SSP0_CLK,
+#ifdef CONFIG_MX28
 	MXC_SSP1_CLK,
 	MXC_SSP2_CLK,
 	MXC_SSP3_CLK,
-	MXC_XTAL_CLK,
+#endif
 };
 
 enum mxs_ioclock {
@@ -45,9 +47,11 @@ enum mxs_ioclock {
 
 enum mxs_sspclock {
 	MXC_SSPCLK0 = 0,
+#ifdef CONFIG_MX28
 	MXC_SSPCLK1,
 	MXC_SSPCLK2,
 	MXC_SSPCLK3,
+#endif
 };
 
 uint32_t mxc_get_clock(enum mxc_clock clk);
-- 
1.7.10.4



More information about the U-Boot mailing list