July 2013 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Mon Jul 1 00:15:30 CEST 2013
Ending: Wed Jul 31 22:18:04 CEST 2013
Messages: 2148

• [U-Boot] [PATCH v2 1/4] lacie_kw: sort #ifdef lists by CONFIG_ identifiers   Simon Guinot
• [U-Boot] [PATCH v2 4/4] arm: add machine ID for CloudBox   Simon Guinot
• [U-Boot] [PATCH v2 3/4] LaCie/common: Fix cloudbox ethernet leds   Simon Guinot
• [U-Boot] [PATCH] blackfin: gpio: Use proper mask for comparing function   Sonic Zhang
• [U-Boot] [PATCH] blackfin: Fix using gd->baudrate before setting its value   Sonic Zhang
• [U-Boot] I'm coming back :)   Graeme Russ
• [U-Boot] [PATCH v2] exynos5250: move board specific configs to board specific config file   Chander Kashyap
• [U-Boot] [PATCH] blackfin: Fix using gd->baudrate before setting its value   Axel Lin
• [U-Boot] U-boot2013:07-Recompile with -fPIC error for mips64 board   krishna dwivedi
• [U-Boot] [PATCH v2] exynos5250: move board specific configs to board specific config file   Simon Glass
• [U-Boot] [PATCH] gpio: spear_gpio: Fix gpio_set_value() implementation   Vipin Kumar
• [U-Boot] [PATCH] blackfin: Fix using gd->baudrate before setting its value   Sonic Zhang
• [U-Boot] [PATCH v2] blackfin: Fix using gd->baudrate before setting its value   Axel Lin
• [U-Boot] [PATCH] gpio: spear_gpio: Fix gpio_set_value() implementation   Axel Lin
• [U-Boot] [PATCH] gpio: spear_gpio: Fix gpio_set_value() implementation   Vipin Kumar
• [U-Boot] [PATCH] Powerpc: eSDHC: Fix mmc read write err in uboot of T4240QDS board   Haijun Zhang
• [U-Boot] [PATCH] usb:composite:fix Provide function data when addressing device with only one interface   Lukasz Majewski
• [U-Boot] [PATCH 1/2] powerpc/85xx: Add C29x SoC support   y at tx30smr01.am.freescale.net
• [U-Boot] [PATCH 2/2] powerpc/c29xpcie: add support for C29XPCIE board   y at tx30smr01.am.freescale.net
• [U-Boot] I'm coming back :)   Albert ARIBAUD
• [U-Boot] [PATCH] Origen: Correct equation to calculate PLL output frequency   Rajeshwari Shinde
• [U-Boot] [PATCH] Origen: Correct equation to calculate PLL output frequency   Minkyu Kang
• [U-Boot] [PATCH] Origen: Correct equation to calculate PLL output frequency   Rajeshwari Birje
• [U-Boot] [PATCH 6/7 v6] nand: tpl : introduce the TPL based on the SPL   Zhang Ying-B40530
• [U-Boot] [PATCH] powerpc/mpc85xx:Disable Debug TLB entry for non-minimal SPL   Prabhakar Kushwaha
• [U-Boot] U-boot-2012.04 compilation for qemu-mips board   krishna dwivedi
• [U-Boot] [PATCH v2 4/4] arm: add machine ID for CloudBox   Frédéric Leroy
• [U-Boot] [PATCH 1/2] powerpc/85xx: Add C29x SoC support   Wolfgang Denk
• [U-Boot] [PATCH 4/4] EXYNOS: Move files from board/samsung to arch/arm.   Rajeshwari Birje
• [U-Boot] compiled failed when turned off gcc optimazition   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH 2/2] powerpc/c29xpcie: add support for C29XPCIE board   Wolfgang Denk
• [U-Boot] U-boot2013:07-Recompile with -fPIC error for mips64 board   Wolfgang Denk
• [U-Boot] U-boot-2012.04 compilation for qemu-mips board   Wolfgang Denk
• [U-Boot] [PATCH v2 4/4] arm: add machine ID for CloudBox   Simon Guinot
• [U-Boot] [PATCH 0/4 V2] EXYNOS: Convert Assembly code to c and make it common   Rajeshwari Shinde
• [U-Boot] [PATCH 1/4 V2] EXYNOS: Add API for power reset and exit wakeup   Rajeshwari Shinde
• [U-Boot] [PATCH 2/4 V2] EXYNOS: LDS file move to common   Rajeshwari Shinde
• [U-Boot] [PATCH 3/4 V2] EXYNOS4210: Configure GPIO for uart   Rajeshwari Shinde
• [U-Boot] [PATCH 4/4 V2] EXYNOS: Move files from board/samsung to arch/arm.   Rajeshwari Shinde
• [U-Boot] compiled failed when turned off gcc optimazition   Wolfgang Denk
• [U-Boot] compiled failed when turned off gcc optimazition   TigerLiu at viatech.com.cn
• [U-Boot] U-boot-2012.04 compilation for qemu-mips board   krishna dwivedi
• [U-Boot] [PATCH 0/4 V2] EXYNOS: Convert Assembly code to c and make it common   Rajeshwari Birje
• [U-Boot] [PATCH v2] exynos5250: move board specific configs to board specific config file   Inderpal Singh
• [U-Boot] [PATCH 1/1] socfpga: Adding System Manager driver which will configure the pin mux for real hardware Cyclone V   Pavel Machek
• [U-Boot] [PATCH v2 1/1] socfpga: Adding System Manager driver which will configure the pin mux for real hardware Cyclone V   Pavel Machek
• [U-Boot] U-boot2013:07-Recompile with -fPIC error for mips64 board   krishna dwivedi
• [U-Boot] [PATCH 1/1] socfpga: Consolidating reset code into reset_manager.c. Also separating reset configuration for virtual target and real hardware Cyclone V development kit   Pavel Machek
• [U-Boot] U-boot2013:07-Recompile with -fPIC error for mips64 board   Amit Virdi
• [U-Boot] [PATCH v2] blackfin: Fix using gd->baudrate before setting its value   Sonic Zhang
• [U-Boot] [RFC] [UBOOT] [PATCH v2 2/4] USB: Adapt the usb-compat.h to uboot and fix compiler errors   Marek Vasut
• [U-Boot] [RFC] [UBOOT] [PATCH v2 0/4] DWC back port from Linux kernel   Marek Vasut
• [U-Boot] U-boot2013:07-Recompile with -fPIC error for mips64 board   krishna dwivedi
• [U-Boot] compiled failed when turned off gcc optimazition   Wolfgang Denk
• [U-Boot] U-boot-2012.04 compilation for qemu-mips board   Wolfgang Denk
• [U-Boot] Reminder mail [Fwd: Kernel bring Up fail in NOR boot for custom board]]   Shrimanth
• [U-Boot] [PATCH v3 0/3] arm: add support for LaCie CloudBox   Frédéric Leroy
• [U-Boot] [PATCH v3 1/3] lacie_kw: sort #ifdef lists by CONFIG_ identifiers   Frédéric Leroy
• [U-Boot] [PATCH v3 2/3] LaCie/common: Uses #defines for ethernet phy leds setup   Frédéric Leroy
• [U-Boot] [PATCH v3 3/3] arm: add support for LaCie CloudBox   Frédéric Leroy
• [U-Boot] [PATCH] cmd_bootm.c: Correct check/return for unsupported sub-command   Tom Rini
• [U-Boot] Reminder mail [Fwd: Kernel bring Up fail in NOR boot for custom board]]   Marek Vasut
• [U-Boot] [PATCH 0/6] Upstream environment changes being used in Yocto/OE   Tom Rini
• [U-Boot] [PATCH 0/6] Upstream environment changes being used in Yocto/OE   Otavio Salvador
• [U-Boot] [PATCH 0/6] Upstream environment changes being used in Yocto/OE   Tom Rini
• [U-Boot] [PATCH 0/6] Upstream environment changes being used in Yocto/OE   Otavio Salvador
• [U-Boot] U-boot-2012.04 compilation for qemu-mips board   krishna dwivedi
• [U-Boot] [PATCH 1/1] socfpga: Adding System Manager driver which will configure the pin mux for real hardware Cyclone V   Chin Liang See
• [U-Boot] [PATCH v2 1/1] socfpga: Adding System Manager driver which will configure the pin mux for real hardware Cyclone V   Chin Liang See
• [U-Boot] [PATCH 1/1] socfpga: Consolidating reset code into reset_manager.c. Also separating reset configuration for virtual target and real hardware Cyclone V development kit   Chin Liang See
• [U-Boot] [PATCH v2 1/1] socfpga: Separating the configuration file for Virtual Target and real hardware Cyclone V development kit   Chin Liang See
• [U-Boot] Regression due to 020bbcb "usb: hub: Power-cycle on root-hub ports"   Vivek Gautam
• [U-Boot] [PATCH v3 1/1] socfpga: Adding configuration for development kit   Chin Liang See
• [U-Boot] [PATCH v2 1/1] socfpga: Creating driver for Reset Manager   Chin Liang See
• [U-Boot] [PATCH v3 1/2] socfpga: Adding System Manager driver   Chin Liang See
• [U-Boot] [PATCH v3 2/2] socfpga: Adding System Manager driver   Chin Liang See
• [U-Boot] [PATCH] lcd: remove unaligned access in lcd_dt_simplefb_configure_node()   Stephen Warren
• [U-Boot] [PATCH] lcd: remove unaligned access in lcd_dt_simplefb_configure_node()   Tom Rini
• [U-Boot] Regression due to 020bbcb "usb: hub: Power-cycle on root-hub ports"   Stephen Warren
• [U-Boot] [PATCH v2] net: Use ARRAY_SIZE at appropriate places   Jagan Teki
• [U-Boot] [PATCH 6/7 v6] nand: tpl : introduce the TPL based on the SPL   Scott Wood
• [U-Boot] [PATCH v2] net: Use ARRAY_SIZE at appropriate places   Jagan Teki
• [U-Boot] [PATCH] powerpc/mpc85xx:Disable Debug TLB entry for non-minimal SPL   Scott Wood
• [U-Boot] [PATCH] drivers:video:s6e8ax0: change data_to_send array to static   Anatolij Gustschin
• [U-Boot] compiled failed when turned off gcc optimazition   Mike Dunn
• [U-Boot] [PATCH] lcd: remove unaligned access in lcd_dt_simplefb_configure_node()   Anatolij Gustschin
• [U-Boot] [PATCH v3 0/3] arm: add support for LaCie CloudBox   Simon Guinot
• [U-Boot] [PATCH] lcd: remove unaligned access in lcd_dt_simplefb_configure_node()   Anatolij Gustschin
• [U-Boot] [PATCH] socfpga: Move board/socfpga_cyclone5 to board/socfpga   dinguyen at altera.com
• [U-Boot] [PATCH 2/3] tools/proftool: add missing definition   Jeroen Hofstee
• [U-Boot] [PATCH V4] lcd: align bmp header when uncopmressing image   Anatolij Gustschin
• [U-Boot] [PATCH 1/3] lib/rsa/rsa-sig.c: compile on OS X   Lubomir Popov
• [U-Boot] [PATCH 2/3] tools/proftool: add missing definition   Lubomir Popov
• [U-Boot] [PATCH 3/3] Makefile: fix readelf usage   Lubomir Popov
• [U-Boot] [PATCH 0/3] btrfs fixes   Stefan Agner
• [U-Boot] [PATCH 1/3] btrfs: use PLATFORM_NO_UNALIGNED to allow unaligned access   Stefan Agner
• [U-Boot] [PATCH 2/3] btrfs: Fix crash while path parsing   Stefan Agner
• [U-Boot] [PATCH 3/3] btrfs: removed btrfs_mangle_name   Stefan Agner
• [U-Boot] Pull request: nand flash   Tom Rini
• [U-Boot] U-boot-2012.04 compilation for qemu-mips board   Wolfgang Denk
• [U-Boot] compiled failed when turned off gcc optimazition   Wolfgang Denk
• [U-Boot] [PATCH 0/3 v2] video: lcd: splash screen prepare changes   Anatolij Gustschin
• [U-Boot] [PATCH 2/3] tools/proftool: add missing definition   Jeroen Hofstee
• [U-Boot] [ANN] v2013.07-rc2   Robert Nelson
• [U-Boot] [PATCH v4 1/1] socfpga: Adding configuration for development kit   Chin Liang See
• [U-Boot] [PATCH] bmp: Respect "splashpos" if it is defined   Anatolij Gustschin
• [U-Boot] [PATCH] video: consolidate splash screen alignment code   Anatolij Gustschin
• [U-Boot] Pull request: u-boot-video/master   Anatolij Gustschin
• [U-Boot] [PATCH v3 0/3] arm: add support for LaCie CloudBox   Prafulla Wadaskar
• [U-Boot] [PATCH] video: consolidate splash screen alignment code   Otavio Salvador
• [U-Boot] [PATCH] bmp: Respect "splashpos" if it is defined   Otavio Salvador
• [U-Boot] [PATCH v3 1/1] socfpga: Creating driver for Reset Manager   Chin Liang See
• [U-Boot] [PATCH v4 1/2] socfpga: Adding System Manager driver   Chin Liang See
• [U-Boot] [PATCH v4 2/2] socfpga: Adding System Manager driver   Chin Liang See
• [U-Boot] Pull request: u-boot-video/master   Otavio Salvador
• [U-Boot] test HYP mode in arch/arm/cpu/armv7/start.S   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH v2] exynos5250: move board specific configs to board specific config file   Simon Glass
• [U-Boot] [PATCH v2] net: Use ARRAY_SIZE at appropriate places   Axel Lin
• [U-Boot] [PATCH 1/2][v2] board/bsc9132qds: Add DSP side tlb and laws   Priyanka Jain
• [U-Boot] [PATCH 2/2][v2] board/bsc9132qds: Configure DSP DDR controller   Priyanka Jain
• [U-Boot] [PATCH] CONFIG: EXYNOS5: Replace misnomer SMDK5250 with EXYNOS5250 and update Makefiles   Inderpal Singh
• [U-Boot] [PATCH v3 1/1] socfpga: Creating driver for Reset Manager   Wolfgang Denk
• [U-Boot] [PATCH v4 1/2] socfpga: Adding System Manager driver   Wolfgang Denk
• [U-Boot] [PATCH v4 2/2] socfpga: Adding System Manager driver   Wolfgang Denk
• [U-Boot] [PATCH v3 0/2] Add Arndale board support   Inderpal Singh
• [U-Boot] [PATCH v3 1/2] exynos5250: Add arndale board support   Inderpal Singh
• [U-Boot] [PATCH v3 2/2] exynos5250: arndale: Add mmc support   Inderpal Singh
• [U-Boot] [PATCH v4 2/2] socfpga: Adding System Manager driver   Chin Liang See
• [U-Boot] Reminder mail [Fwd: Kernel bring Up fail in NOR boot for custom board]]   Shrimanth
• [U-Boot] [PATCH v3 0/2] Add Arndale board support   Chander Kashyap
• [U-Boot] [PATCH 4/4 V2] EXYNOS: Move files from board/samsung to arch/arm.   Minkyu Kang
• [U-Boot] Pull request: u-boot-video/master   Anatolij Gustschin
• [U-Boot] [PATCH v3 1/2] exynos5250: Add arndale board support   Minkyu Kang
• [U-Boot] [PATCH v2 0/3] Adopt u-boot build to OS X   Andreas Bießmann
• [U-Boot] [PATCH v2 1/3] lib/rsa/rsa-sig.c: compile on OS X   Andreas Bießmann
• [U-Boot] [PATCH v2 2/3] tools/proftool: remove REG_NOERROR   Andreas Bießmann
• [U-Boot] [PATCH v2 3/3] Makefile: fix readelf usage   Andreas Bießmann
• [U-Boot] [PATCH 1/2 v3] powerpc/85xx: Add C29x SoC support   Po Liu
• [U-Boot] [PATCH 2/2 v3] powerpc/c29xpcie: add support for C29XPCIE board   Po Liu
• [U-Boot] [PATCH 2/3] tools/proftool: add missing definition   Andreas Bießmann
• [U-Boot] [ANN] v2013.07-rc2   Lubomir Popov
• [U-Boot] [PATCH] cosmetic: README.SPL: fix a typo   Masahiro Yamada
• [U-Boot] [PATCH] Origen: Correct equation to calculate PLL output frequency   Minkyu Kang
• [U-Boot] [ANN] v2013.07-rc2   Simon Glass
• [U-Boot] [PATCH] CONFIG: EXYNOS5: Replace misnomer SMDK5250 with EXYNOS5250 and update Makefiles   Simon Glass
• [U-Boot] I'm coming back :)   Simon Glass
• [U-Boot] [PATCH 4/4 V2] EXYNOS: Move files from board/samsung to arch/arm.   Rajeshwari Birje
• [U-Boot] [PATCH v2 2/4] arm:goni:dfu Add support for DFU at GONI target   Minkyu Kang
• [U-Boot] [PATCH v5 1/3] Prepare for TI816X : reuse existing code from TI814X   TENART Antoine
• [U-Boot] [PATCH] board/freescale/common: IDT8T49N222A configuration code   Shaveta Leekha
• [U-Boot] [PATCH] powerpc/mpc85xx: Add defines for serdes RSTCTL register   Shaveta Leekha
• [U-Boot] [PATCH] powerpc/asm: Move function declaration of 'serdes_get_prtcl' to fsl_serdes.h   Shaveta Leekha
• [U-Boot] [PATCH] board/b4860qds: Add support for configuring SerDes1 Refclks   Shaveta Leekha
• [U-Boot] UART output has problems with latest uboot source code on S5PC100 board   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH] powerpc/mpc85xx: Enabling CPC conditionally based on hwconfig options   Singh Sandeep-B37400
• [U-Boot] [PATCH v6 0/3] Add TI816X EVM support   TENART Antoine
• [U-Boot] [PATCH v6 1/3] Prepare for TI816X : reuse existing code from TI814X   TENART Antoine
• [U-Boot] [PATCH v6 2/3] Add TI816X support   TENART Antoine
• [U-Boot] [PATCH v6 3/3] Add TI816X evm board support   TENART Antoine
• [U-Boot] [ANN] v2013.07-rc2   Andreas Bießmann
• [U-Boot] [PATCH v2] cmd_bootm.c: Correct BOOTM_ERR_OVERLAP handling   Andreas Bießmann
• [U-Boot] [PATCH] powerpc/b4860: Disable unused devices using DEVDISR register   Sandeep Singh
• [U-Boot] [PATCH 1/2] powerpc/83xx/km: MV88e6122 errata fix for 1.9V   Holger Brunck
• [U-Boot] [PATCH v6 0/3] Add TI816X EVM support   TENART Antoine
• [U-Boot] [PATCH v2 1/1] socfpga: Adding System Manager driver which will configure the pin mux for real hardware Cyclone V   Pavel Machek
• [U-Boot] [ANN] v2013.07-rc2   Dirk Eibach
• [U-Boot] [ANN] v2013.07-rc2   Robert Nelson
• [U-Boot] [ANN] v2013.07-rc2   Robert Nelson
• [U-Boot] [PATCH] socfpga: Move board/socfpga_cyclone5 to board/socfpga   Pavel Machek
• [U-Boot] [PATCH v4 1/1] socfpga: Adding configuration for development kit   Pavel Machek
• [U-Boot] [PATCH 1/1] socfpga: Consolidating reset code into reset_manager.c. Also separating reset configuration for virtual target and real hardware Cyclone V development kit   Pavel Machek
• [U-Boot] [PATCH] avr32: fix do_bootm_linux   Andreas Bießmann
• [U-Boot] Pull request: u-boot-video/master   Otavio Salvador
• [U-Boot] Run a standalone application on a core other than 0   João Fernandes
• [U-Boot] [PATCH 4/4 V2] EXYNOS: Move files from board/samsung to arch/arm.   Rajeshwari Birje
• [U-Boot] [ANN] v2013.07-rc2   Tom Rini
• [U-Boot] [PATCH v2] cmd_bootm.c: Correct BOOTM_ERR_OVERLAP handling   Tom Rini
• [U-Boot] [RFC PATCH] arm: arm926ejs: flush cache before disable it   Bo Shen
• [U-Boot] [ANN] v2013.07-rc2   Andreas Bießmann
• [U-Boot] [PATCH v2] cmd_bootm.c: Correct BOOTM_ERR_OVERLAP handling   Andreas Bießmann
• [U-Boot] [PATCH 0/7] USB: XHCI: Add xHCI host controller stack driver   Vivek Gautam
• [U-Boot] [PATCH 1/7] arm: exynos5250: Define CONFIG_SYS_CACHELINE_SIZE   Vivek Gautam
• [U-Boot] [PATCH 2/7] USB: xHCI: Add stack support for xHCI   Vivek Gautam
• [U-Boot] [PATCH 3/7] USB: XHCI: Add xHCI host controller support for Exynos5   Vivek Gautam
• [U-Boot] [PATCH 4/7] arm: exynos: Add methods to control power to USB 3.0 PHY   Vivek Gautam
• [U-Boot] [PATCH 5/7] exynos5: dts: Add COMPAT string data for USB 3.0 PHY and XHCI   Vivek Gautam
• [U-Boot] [PATCH 6/7] exynos5: dts: Add device node for XHCI   Vivek Gautam
• [U-Boot] [PATCH 7/7] temp: ARM: EXYNOS5: Enable xHCI support for Exynos5   Vivek Gautam
• [U-Boot] [PATCH v2] cmd_bootm.c: Correct BOOTM_ERR_OVERLAP handling   Tom Rini
• [U-Boot] [PATCH] avr32: fix do_bootm_linux   Tom Rini
• [U-Boot] [PATCH] cmd_bootm.c: Correct check/return for unsupported sub-command   Andreas Bießmann
• [U-Boot] [PATCH 0/4 V3]EXYNOS: Convert Assembly code to c and make it common   Rajeshwari Shinde
• [U-Boot] [PATCH 1/4 V3] EXYNOS: Add API for power reset and exit wakeup   Rajeshwari Shinde
• [U-Boot] [PATCH 2/4 V3] EXYNOS: LDS file move to common   Rajeshwari Shinde
• [U-Boot] [PATCH 3/4 V3] EXYNOS4210: Configure GPIO for uart   Rajeshwari Shinde
• [U-Boot] [PATCH 4/4 V3] EXYNOS: Move files from board/samsung to arch/arm   Rajeshwari Shinde
• [U-Boot] [PATCH v2] avr32: fix do_bootm_linux   Tom Rini
• [U-Boot] [PATCH v2] avr32: fix do_bootm_linux   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH] avr32: fix do_bootm_linux   Andreas Bießmann
• [U-Boot] [ANN] v2013.07-rc2   Simon Glass
• [U-Boot] UART output has problems with latest uboot source code on S5PC100 board   Lukasz Majewski
• [U-Boot] [PULL] u-boot-usb/master   Lukasz Majewski
• [U-Boot] [PATCH] mtd: mxc_nand: Fix crash after MTD resync   Marek Vasut
• [U-Boot] Backport of DWC3 and xHCI stack from Linux kernel to uBoot   Dan Murphy
• [U-Boot] [RFC] [UBOOT] [PATCH v3 1/7] USB: Backport kernel usb header file   Dan Murphy
• [U-Boot] [RFC] [UBOOT] [PATCH v3 2/7] USB: Adapt the usb-compat.h to uboot and fix compiler errors   Dan Murphy
• [U-Boot] [RFC] [UBOOT] [PATCH v3 3/7] USB: Initial kernel back port of the dwc3 kernel code   Dan Murphy
• [U-Boot] [RFC] [UBOOT] [PATCH v3 4/7] USB: dwc3: dwc3 code adaption for uBoot   Dan Murphy
• [U-Boot] [RFC] [UBOOT] [PATCH v3 5/7] omap5: usb: Add usb otg clocks and enable   Dan Murphy
• [U-Boot] [RFC] [UBOOT] [PATCH v3 6/7] USB: Add xhci linux kernel host driver   Dan Murphy
• [U-Boot] [RFC] [UBOOT] [PATCH v3 7/7] USB: Modify the xHCI to adapt to the uBoot code base   Dan Murphy
• [U-Boot] [RFC] [UBOOT] [PATCH v3 1/7] USB: Backport kernel usb header file   Nishanth Menon
• [U-Boot] [RFC] [UBOOT] [PATCH v3 1/7] USB: Backport kernel usb header file   Dan Murphy
• [U-Boot] [PATCH 0/7] USB: XHCI: Add xHCI host controller stack driver   Dan Murphy
• [U-Boot] imx: Kernel not booting with fdt   Matthias Weißer
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [RFC] Supporting multiple variants of an SoC   Tom Rini
• [U-Boot] Regression due to 020bbcb "usb: hub: Power-cycle on root-hub ports"   Vivek Gautam
• [U-Boot] [RFC] Supporting multiple variants of an SoC   Stephen Warren
• [U-Boot] [PATCH 2/2 v3] powerpc/c29xpcie: add support for C29XPCIE board   Scott Wood
• [U-Boot] [PATCH v2 2/3] tools/proftool: remove REG_NOERROR   Jeroen Hofstee
• [U-Boot] [PATCH] mtd: mxc_nand: Fix crash after MTD resync   Scott Wood
• [U-Boot] compiled failed when turned off gcc optimazition   Mike Dunn
• [U-Boot] imx: Kernel not booting with fdt   Stefano Babic
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] usb: omap: ulpi: fix ulpi reading/writing functions   Tom Rini
• [U-Boot] [U-Boot, v4] usb: omap: ulpi: fix ulpi transceiver access   Tom Rini
• [U-Boot] am33xx: fix the ddr_cmdtctrl structure   Tom Rini
• [U-Boot] ARM: OMAP4+: Fix MA detection during SDRAM_AUTO_DETECTION   Tom Rini
• [U-Boot] ARM: OMAP: GPIO: Fix valid range and enable usage of all GPIOs on OMAP5   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PATCHv2] socfpga: Move board/socfpga_cyclone5 to board/socfpga   dinguyen at altera.com
• [U-Boot] [RFC] Supporting multiple variants of an SoC   Tom Rini
• [U-Boot] [PATCH v6 1/3] Prepare for TI816X : reuse existing code from TI814X   Tom Rini
• [U-Boot] [PATCH] mtd: mxc_nand: Fix crash after MTD resync   Marek Vasut
• [U-Boot] [PATCH] mtd: mxc_nand: Fix crash after MTD resync   Scott Wood
• [U-Boot] Run a standalone application on a core other than 0   Scott Wood
• [U-Boot] [PATCH] mtd: mxc_nand: Fix crash after MTD resync   Marek Vasut
• [U-Boot] Marvell SheevaPlug v2013.04 Refresh (ask for review)   DrEagle
• [U-Boot] [PATCH 0/7] USB: XHCI: Add xHCI host controller stack driver   Marek Vasut
• [U-Boot] [PATCH v5 1/3] Prepare for TI816X : reuse existing code from TI814X   Wolfgang Denk
• [U-Boot] Backport of DWC3 and xHCI stack from Linux kernel to uBoot   Wolfgang Denk
• [U-Boot] [RFC] Supporting multiple variants of an SoC   Wolfgang Denk
• [U-Boot] [RFC] Supporting multiple variants of an SoC   Wolfgang Denk
• [U-Boot] [PATCHv2] socfpga: Move board/socfpga_cyclone5 to board/socfpga   Wolfgang Denk
• [U-Boot] Backport of DWC3 and xHCI stack from Linux kernel to uBoot   Marek Vasut
• [U-Boot] [PATCHv2] socfpga: Move board/socfpga_cyclone5 to board/socfpga   dinguyen at altera.com
• [U-Boot] compiled failed when turned off gcc optimazition   Graeme Russ
• [U-Boot] [PATCH V2] mtd: mxc_nand: Fix crash after MTD resync   Marek Vasut
• [U-Boot] imx: Kernel not booting with fdt   Fabio Estevam
• [U-Boot] [PATCH v3 0/5] ARM: at91: atmel_nand: check ONFI ecc minimum requirement   Josh Wu
• [U-Boot] [PATCH v3 1/5] ARM: at91: atmel_nand: pmecc driver will select the galois table by sector size   Josh Wu
• [U-Boot] [PATCH v3 2/5] ARM: at91: sama5d3: remove unused definition about PMECC alpha table offset   Josh Wu
• [U-Boot] [PATCH v3 3/5] linux/compat.h: move dev_err, dev_info and dev_dbg from usb driver to compat.h   Josh Wu
• [U-Boot] [PATCH v3 4/5] mtd: atmel_nand: alloc memory instead of use static array for pmecc data   Josh Wu
• [U-Boot] [PATCH v3 5/5] ARM: at91: atmel_nand: add code to check the ONFI parameter ECC requirement   Josh Wu
• [U-Boot] [U-boot] monitor length question   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH v3] net: Use ARRAY_SIZE at appropriate places   Axel Lin
• [U-Boot] imx: Kernel not booting with fdt   Matthias Weißer
• [U-Boot] [RFC] Supporting multiple variants of an SoC   Lukasz Majewski
• [U-Boot] [PATCH v6 1/3] Prepare for TI816X : reuse existing code from TI814X   TENART Antoine
• [U-Boot] [PATCH v4] powerpc/c29xpcie: add support for C29XPCIE board   Po Liu
• [U-Boot] [U-boot] monitor length question   TigerLiu at viatech.com.cn
• [U-Boot] GPL v3 only code in U-Boot   Dirk Behme
• [U-Boot] GPL v3 only code in U-Boot   Graeme Russ
• [U-Boot] GPL v3 only code in U-Boot   Wolfgang Denk
• [U-Boot] [PATCH v8 3/3] MIPS: Jz4740: Add qi_lb60 board support   Wolfgang Denk
• [U-Boot] [PATCH] powerpc/rman: fix RMan support for t4240 and b4860   Minghuan Lian
• [U-Boot] [PATCH v4 1/1] NET: Improve TFTP booting performance when CONFIG_USB_KEYBOARD   Jim Lin
• [U-Boot] [PATCH v4] powerpc/c29xpcie: add support for C29XPCIE board   Wolfgang Denk
• [U-Boot] [PATCH 0/7] USB: XHCI: Add xHCI host controller stack driver   Vivek Gautam
• [U-Boot] [PATCH v4 1/1] NET: Improve TFTP booting performance when CONFIG_USB_KEYBOARD   Wolfgang Denk
• [U-Boot] imx: Kernel not booting with fdt   Fabio Estevam
• [U-Boot] [PATCH 4/4 V3] EXYNOS: Move files from board/samsung to arch/arm   Minkyu Kang
• [U-Boot] [PATCH v6 1/3] Prepare for TI816X : reuse existing code from TI814X   Tom Rini
• [U-Boot] [RFC] Supporting multiple variants of an SoC   Tom Rini
• [U-Boot] [PATCH v2] avr32: fix do_bootm_linux   Tom Rini
• [U-Boot] [PATCH] cmd_bootm.c: Correct check/return for unsupported sub-command   Tom Rini
• [U-Boot] [PATCH 4/4 V3] EXYNOS: Move files from board/samsung to arch/arm   Rajeshwari Birje
• [U-Boot] [PPC 74xx_7xx] Please pull u-boot-74xx-7xx.git   Tom Rini
• [U-Boot] [PATCH] usb: fix unaligned access in device_qual()   Marek Vasut
• [U-Boot] I'm coming back :)   Tom Rini
• [U-Boot] I'm coming back :)   Graeme Russ
• [U-Boot] [ANN] v2013.07-rc2   Simon Glass
• [U-Boot] [ANN] v2013.07-rc2   Tom Rini
• [U-Boot] [ANN] v2013.07-rc2   Robert Nelson
• [U-Boot] [PATCH] scsi: Correct types of scsi_read/write()   Simon Glass
• [U-Boot] [PATCH 1/3] bootm: Handle errors consistently   Simon Glass
• [U-Boot] [PATCH 2/3] bootm: Disable interrupts only when loading   Simon Glass
• [U-Boot] [PATCH 3/3] bootm: Add the missing PREP stage to bootz   Simon Glass
• [U-Boot] [PATCH 1/3] lib/rsa/rsa-sig.c: compile on OS X   Simon Glass
• [U-Boot] imx: Kernel not booting with fdt   Matthias Weißer
• [U-Boot] [PATCH v2 2/3] tools/proftool: remove REG_NOERROR   Simon Glass
• [U-Boot] imx: Kernel not booting with fdt   Fabio Estevam
• [U-Boot] [PATCH v7 3/5] Add Atmel I2C tpm   Simon Glass
• [U-Boot] [PATCH 3/3] bootm: Add the missing PREP stage to bootz   Robert Nelson
• [U-Boot] imx: Kernel not booting with fdt   Matthias Weißer
• [U-Boot] [PATCH 3/3] bootm: Add the missing PREP stage to bootz   Robert Nelson
• [U-Boot] [PATCH v2 2/2] cmd_sf: "sf update" preserve the final part of the last sector   Jagan Teki
• [U-Boot] [PATCH 3/3] bootm: Add the missing PREP stage to bootz   Robert Nelson
• [U-Boot] nds32: ag101/ag102: Inconsistent timer3 counter unit?   Axel Lin
• [U-Boot] [PATCH v5 4/8] MMC: sdhci: Add support for dove sdhci   Jagan Teki
• [U-Boot] [PATCH] sf:stmicro: Add support for N25Q512A   Jagan Teki
• [U-Boot] [PATCH v2 2/2] cmd_sf: "sf update" preserve the final part of the last sector   Gerlando Falauto
• [U-Boot] [RFC] Supporting multiple variants of an SoC   Stephen Warren
• [U-Boot] [PATCH] net: smsc95xx: Add support for another SMSC95xx variant   Stefan Roese
• [U-Boot] [PATCH v4 1/1] NET: Improve TFTP booting performance when CONFIG_USB_KEYBOARD   Stephen Warren
• [U-Boot] [PATCH v3 0/2] SPI flash update command   Gerlando Falauto
• [U-Boot] [PATCH v3 1/2] cmd_sf: let "sf update" erase last sector as a whole   Gerlando Falauto
• [U-Boot] [PATCH v3 2/2] cmd_sf: let "sf update" preserve the final part of the last sector   Gerlando Falauto
• [U-Boot] [PATCH v4] powerpc/c29xpcie: add support for C29XPCIE board   Scott Wood
• [U-Boot] [U-Boot, 1/2] dfu:ext4:fix Fix ext4{read|write} command formatting   Tom Rini
• [U-Boot] [U-Boot, 2/2] dfu:ext4:fix Fix DFU upload functionality   Tom Rini
• [U-Boot] cosmetic: README.SPL: fix a typo   Tom Rini
• [U-Boot] [PATCH v2 0/3] Adopt u-boot build to OS X   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PATCH v5 1/3] arm: spl: Fix SPL booting for OMAP3   Tom Rini
• [U-Boot] [PATCH 0/2] Update Falcon Mode docs   Tom Rini
• [U-Boot] [PATCH 1/2] README.falcon: Note how we determine if we can boot the OS or not   Tom Rini
• [U-Boot] [PATCH 2/2] am335x_evm: Update, document Falcon Mode support   Tom Rini
• [U-Boot] [PATCH 1/2] README.falcon: Note how we determine if we can boot the OS or not   Peter Korsgaard
• [U-Boot] [PATCH 2/2] am335x_evm: Update, document Falcon Mode support   Peter Korsgaard
• [U-Boot] [U-Boot, 2/2] dfu:ext4:fix Fix DFU upload functionality   Marek Vasut
• [U-Boot] [PATCH v3 5/5] ARM: at91: atmel_nand: add code to check the ONFI parameter ECC requirement   Scott Wood
• [U-Boot] [PATCH 2/2] am335x_evm: Update, document Falcon Mode support   Tom Rini
• [U-Boot] [PATCH v4 1/1] NET: Improve TFTP booting performance when CONFIG_USB_KEYBOARD   Wolfgang Denk
• [U-Boot] [PATCH] powerpc/pcie: add PCIe version 3.x support   Roy Zang
• [U-Boot] [PATCH] powerpc/pcie: remove PCIe version 3.x define for B4860 and B4420   Roy Zang
• [U-Boot] [PATCH 4/4 V3] EXYNOS: Move files from board/samsung to arch/arm   Minkyu Kang
• [U-Boot] [PATCH] net: ftmac110: cosmetics and cleanup   Kuo-Jung Su
• [U-Boot] [PATCH v6 00/12] arm: add Faraday A36x SoC platform support   Kuo-Jung Su
• [U-Boot] [PATCH v6 01/12] arm: dma_alloc_coherent: malloc() -> memalign()   Kuo-Jung Su
• [U-Boot] [PATCH v6 02/12] video: add Faraday FTLCDC200 LCD controller support   Kuo-Jung Su
• [U-Boot] [PATCH v6 03/12] nand: add Faraday FTNANDC021 NAND controller support   Kuo-Jung Su
• [U-Boot] [PATCH v6 04/12] cfi_flash: use buffer length in unmap_physmem()   Kuo-Jung Su
• [U-Boot] [PATCH v6 05/12] arm: add MMU/D-Cache support for Faraday cores   Kuo-Jung Su
• [U-Boot] [PATCH v6 06/12] arm: add Faraday processor core support   Kuo-Jung Su
• [U-Boot] [PATCH v6 07/12] arm: add Faraday FTINTC020 interrupt controller support   Kuo-Jung Su
• [U-Boot] [PATCH v6 08/12] arm: add Faraday FTTMR010 timer support   Kuo-Jung Su
• [U-Boot] [PATCH v6 09/12] arm: add Faraday FTPWMTMR010 timer support   Kuo-Jung Su
• [U-Boot] [PATCH v6 10/12] arm: add customized boot command for Faraday Images   Kuo-Jung Su
• [U-Boot] [PATCH v6 11/12] mmc: ftsdc010_mci: clk_get_rate() -> clock_get_rate()   Kuo-Jung Su
• [U-Boot] [PATCH v6 12/12] arm: add Faraday A360/A369 SoC platform support   Kuo-Jung Su
• [U-Boot] [PATCH v5 1/1] NET: Improve TFTP booting performance when CONFIG_USB_KEYBOARD   Jim Lin
• [U-Boot] [PATCH 4/4 V3] EXYNOS: Move files from board/samsung to arch/arm   Rajeshwari Birje
• [U-Boot] [PATCH 4/4 V3] EXYNOS: Move files from board/samsung to arch/arm   Minkyu Kang
• [U-Boot] [PATCH 4/4 V3] EXYNOS: Move files from board/samsung to arch/arm   Rajeshwari Birje
• [U-Boot] [PATCH 2/2] PPC MPC83xx: Fix MPC8323ERDB build warning   Wolfgang Denk
• [U-Boot] [PATCH 0/4 V4]EXYNOS: Convert Assembly code to c and make it common   Rajeshwari Shinde
• [U-Boot] [PATCH 1/4 V4] EXYNOS: Add API for power reset and exit wakeup   Rajeshwari Shinde
• [U-Boot] [PATCH 2/4 V4] EXYNOS: LDS file move to common   Rajeshwari Shinde
• [U-Boot] [PATCH 3/4 V4] EXYNOS4210: Configure GPIO for uart   Rajeshwari Shinde
• [U-Boot] [PATCH 4/4 V4] EXYNOS: Move files from board/samsung to arch/arm   Rajeshwari Shinde
• [U-Boot] [PATCH v3 5/5] ARM: at91: atmel_nand: add code to check the ONFI parameter ECC requirement   Josh Wu
• [U-Boot] Regression: bootz command fails in v2013.07-rc2   Tetsuyuki Kobayashi
• [U-Boot] [resend][PATCH v3 5/5] ARM: at91: atmel_nand: add code to check the ONFI parameter ECC requirement   Josh Wu
• [U-Boot] [PATCH v2 1/7] ARM: prepare armv7.h to be included from assembly source   Andre Przywara
• [U-Boot] [PATCH 2/2] am335x_evm: Update, document Falcon Mode support   Romain Izard
• [U-Boot] [PATCH v2 4/7] ARM: switch to non-secure state during bootm execution   Andre Przywara
• [U-Boot] [PATCH v3] drivers:power:max77686: add function to set voltage and mode   Piotr Wilczek
• [U-Boot] [PATCH] cramfs: fix bug for wrong filename comparison   Holger Brunck
• [U-Boot] [U-boot] DFU tools copyright   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH v5 1/2] powerpc/85xx: Add C29x SoC support   Po Liu
• [U-Boot] [PATCH v5 2/2] powerpc/c29xpcie: add support for C29XPCIE board   Po Liu
• [U-Boot] [U-boot] DFU tools copyright   Lukasz Majewski
• [U-Boot] [RESEND PATCH 0/4] arm:goni: Update GONI configuration   Lukasz Majewski
• [U-Boot] [RESEND PATCH 1/4] arm:goni: Update configuration for goni target   Lukasz Majewski
• [U-Boot] [RESEND PATCH 2/4] arm:goni:dfu Add support for DFU at GONI target   Lukasz Majewski
• [U-Boot] [RESEND PATCH 3/4] arm:goni: Update of GONI partitioning scheme at eMMC   Lukasz Majewski
• [U-Boot] [RESEND PATCH 4/4] arm:goni: Add support for USB mass storage   Lukasz Majewski
• [U-Boot] Reminder of "floating" Samsung patches   Lukasz Majewski
• [U-Boot] [PATCH] mx6: Fix calculation of emi_slow clock rate   Andrew Gabbasov
• [U-Boot] [PATCH v2 6/7] ARM: extend non-secure switch to also go into HYP mode   Andre Przywara
• [U-Boot] [PATCH] mx6: Fix calculation of emi_slow clock rate   Dirk Behme
• [U-Boot] [PATCH 0/6] Upstream environment changes being used in Yocto/OE   Albert ARIBAUD
• [U-Boot] [PATCH] usb: fix unaligned access in device_qual()   Albert ARIBAUD
• [U-Boot] [PATCH v5 1/3] arm: spl: Fix SPL booting for OMAP3   Albert ARIBAUD
• [U-Boot] [PATCH 3/3] Makefile: fix readelf usage   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] PPC MPC83xx: Fix MPC8323ERDB build warning   Timur Tabi
• [U-Boot] [PATCH] cmd_bootm.c: Correct check/return for unsupported sub-command   Andreas Bießmann
• [U-Boot] [PATCH 3/3] Makefile: fix readelf usage   Andreas Bießmann
• [U-Boot] [PATCH 1/3] arm/km: add support for km_kirkwood_128m16 board   Holger Brunck
• [U-Boot] [PATCH 2/3] arm/km: drop unneeded define   Holger Brunck
• [U-Boot] [PATCH 3/3] arm/km: make local function startup_allowed static   Holger Brunck
• [U-Boot] [PATCH 1/4] powerpc/83xx: remove staticness for qe_iop_conf_tab   Holger Brunck
• [U-Boot] [PATCH 2/4] km/common: switch on CMD_GREPENV   Holger Brunck
• [U-Boot] [PATCH 3/4] powerpc/km: drop unused CONFIG_SYS_DTT_LOW_TEMP   Holger Brunck
• [U-Boot] [PATCH 4/4] km/scripts: fix ramfs   Holger Brunck
• [U-Boot] [PATCH 3/3] Makefile: fix readelf usage   Albert ARIBAUD
• [U-Boot] dm3730: dpll5 init broken with 19.2MHz?   Andreas Naumann
• [U-Boot] [PATCH] cmd_bootm.c: Correct check/return for unsupported sub-command   Tom Rini
• [U-Boot] [PATCH v3 2/2] cmd_sf: let "sf update" preserve the final part of the last sector   Jagan Teki
• [U-Boot] TLB mapping for pcie mem space for fsl corenet processors   Sughosh Ganu
• [U-Boot] : MACB TX timeout   Jagan Teki
• [U-Boot] Regression: bootz command fails in v2013.07-rc2   Simon Glass
• [U-Boot] [PATCH 3/3] bootm: Add the missing PREP stage to bootz   Simon Glass
• [U-Boot] [PATCH v2 1/5] bootm: Handle errors consistently   Simon Glass
• [U-Boot] [PATCH v2 2/5] bootm: Disable interrupts only when loading   Simon Glass
• [U-Boot] [PATCH v2 3/5] bootm: Require boot function only if it is about to be used   Simon Glass
• [U-Boot] [PATCH v2 4/5] bootm: Clean up bootz_setup() function   Simon Glass
• [U-Boot] [PATCH v2 5/5] bootm: Add the missing PREP stage to bootz and correct image handling   Simon Glass
• [U-Boot] [PATCH] zmx25: Select CONFIG_OF_LIBFDT   Fabio Estevam
• [U-Boot] [U-boot] DFU tools copyright   Stefan Schmidt
• [U-Boot] : MACB TX timeout   Bo Shen
• [U-Boot] : MACB TX timeout   Jagan Teki
• [U-Boot] Ethernet support on mx6slevk board   Shawn Guo
• [U-Boot] [RESEND PATCH 1/4] arm:goni: Update configuration for goni target   Jaehoon Chung
• [U-Boot] [PATCH][v3] powerpc/mpc85xx:Disable Debug TLB entry for non-minimal SPL   Prabhakar Kushwaha
• [U-Boot] [RESEND PATCH 1/4] arm:goni: Update configuration for goni target   Lukasz Majewski
• [U-Boot] [PATCH v3 2/2] cmd_sf: let "sf update" preserve the final part of the last sector   Gerlando Falauto
• [U-Boot] : MACB TX timeout   Bo Shen
• [U-Boot] [PATCH] common: board_f: Fix build error when CONFIG_TRACE is not defined   Tushar Behera
• [U-Boot] [U-boot] DFU tools copyright   Lukasz Majewski
• [U-Boot] [U-boot] DFU tools copyright   Stefan Schmidt
• [U-Boot] [PATCH] dfu: Update DFU's authorship history   Lukasz Majewski
• [U-Boot] [PATCH] dfu: Update DFU's authorship history   Stefan Schmidt
• [U-Boot] [PATCH v2] dfu: Update DFU's authorship history   Lukasz Majewski
• [U-Boot] [PATCH 0/4 V4]EXYNOS: Convert Assembly code to c and make it common   Minkyu Kang
• [U-Boot] [PATCH v2] dfu: Update DFU's authorship history   Stefan Schmidt
• [U-Boot] [PATCH] arm:trats: Increase malloc pool size (for DFU ext4 transfers)   Minkyu Kang
• [U-Boot] [PATCH] power:bat:trats: Break battery charging with ctrl+C   Minkyu Kang
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] [PATCH] arm: exynos: fix clock calculation   Minkyu Kang
• [U-Boot] compiled failed when turned off gcc optimazition   TigerLiu at viatech.com.cn
• [U-Boot] Ethernet support on mx6slevk board   Wang Huan-B18965
• [U-Boot] Ethernet support on mx6slevk board   Fabio Estevam
• [U-Boot] Ethernet support on mx6slevk board   Fabio Estevam
• [U-Boot] Ethernet support on mx6slevk board   Shawn Guo
• [U-Boot] Ethernet support on mx6slevk board   Fabio Estevam
• [U-Boot] [U-Boot, 2/2] dfu:ext4:fix Fix DFU upload functionality   Tom Rini
• [U-Boot] [PATCH 2/2] am335x_evm: Update, document Falcon Mode support   Tom Rini
• [U-Boot] [PATCH v2 1/5] bootm: Handle errors consistently   Tom Rini
• [U-Boot] Fwd: U-Boot 2013.04: himport_r: can't insert "..."into hash table   Thomas O'Hara
• [U-Boot] [U-Boot, 2/2] dfu:ext4:fix Fix DFU upload functionality   Marek Vasut
• [U-Boot] compiled failed when turned off gcc optimazitionAT   Albert ARIBAUD
• [U-Boot] [U-Boot, 2/2] dfu:ext4:fix Fix DFU upload functionality   Tom Rini
• [U-Boot] [U-Boot, 2/2] dfu:ext4:fix Fix DFU upload functionality   Marek Vasut
• [U-Boot] PCIe support for Tegra T30 ?   Bob Koninckx
• [U-Boot] [U-Boot, 2/2] dfu:ext4:fix Fix DFU upload functionality   Lukasz Majewski
• [U-Boot] PCIe support for Tegra T30 ?   Stephen Warren
• [U-Boot] [PATCH v5 1/1] NET: Improve TFTP booting performance when CONFIG_USB_KEYBOARD   Stephen Warren
• [U-Boot] How to prepare a MTD partion?   Woody Wu
• [U-Boot] please pull u-boot-samsung master   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/5] bootm: Handle errors consistently   Simon Glass
• [U-Boot] [PATCH] common: board_f: Fix build error when CONFIG_TRACE is not defined   Simon Glass
• [U-Boot] [PATCH v2 1/5] bootm: Handle errors consistently   Tom Rini
• [U-Boot] [PATCH v2 1/5] bootm: Handle errors consistently   Simon Glass
• [U-Boot] [PATCH v2 1/5] bootm: Handle errors consistently   Tom Rini
• [U-Boot] [PATCH v2 1/5] bootm: Handle errors consistently   Simon Glass
• [U-Boot] test HYP mode in arch/arm/cpu/armv7/start.S   Albert ARIBAUD
• [U-Boot] [RFC PATCH] arm: arm926ejs: flush cache before disable it   Albert ARIBAUD
• [U-Boot] [PATCHv2] socfpga: Move board/socfpga_cyclone5 to board/socfpga   Albert ARIBAUD
• [U-Boot] Marvell SheevaPlug v2013.04 Refresh (ask for review)   Albert ARIBAUD
• [U-Boot] [U-boot] monitor length question   Albert ARIBAUD
• [U-Boot] [PATCH] cramfs: fix bug for wrong filename comparison   Albert ARIBAUD
• [U-Boot] [PATCH] zmx25: Select CONFIG_OF_LIBFDT   Albert ARIBAUD
• [U-Boot] [PATCH] zmx25: Select CONFIG_OF_LIBFDT   Fabio Estevam
• [U-Boot] [PATCH] zmx25: Select CONFIG_OF_LIBFDT   Albert ARIBAUD
• [U-Boot] [PATCH] zmx25: Select CONFIG_OF_LIBFDT   Albert ARIBAUD
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] [RESEND PATCH 2/4] arm:goni:dfu Add support for DFU at GONI target   Minkyu Kang
• [U-Boot] [U-Boot, 2/2] dfu:ext4:fix Fix DFU upload functionality   Sumit Gemini
• [U-Boot] Porting ehci-exynos.c to handle exynos4412 (odroid-u2)   Suriyan Ramasami
• [U-Boot] [PATCH] Enable serial console only before booting   Frédéric Leroy
• [U-Boot] [PATCH] Enable serial console only before booting   Frédéric Leroy
• [U-Boot] [PATCH] m28evk: add trimffs to nand command   Marek Vasut
• [U-Boot] [PATCH] Enable serial console only before booting   Wolfgang Denk
• [U-Boot] [RFC PATCH] arm: arm926ejs: flush cache before disable it   Bo Shen
• [U-Boot] Marvell SheevaPlug v2013.04 Refresh (ask for review)   DrEagle
• [U-Boot] [PATCH 0/8] arm kirkwood - sheevaplug refresh   DrEagle
• [U-Boot] [PATCH 1/8] arm kirkwood - add kirkwood_id   DrEagle
• [U-Boot] [PATCH 2/8] arm kirkwood update supported devices and revisions   DrEagle
• [U-Boot] [PATCH 3/8] arm kirkwood add kw88f6282 support   DrEagle
• [U-Boot] [PATCH 4/8] arm kirkwood add MVSDIO driver v3   DrEagle
• [U-Boot] [PATCH 5/8] arm kirkwood add MVSDIO kirkwood support   DrEagle
• [U-Boot] [PATCH 6/8] arm kirkwood add MVSDIO sheevaplug support   DrEagle
• [U-Boot] [PATCH 7/8] arm kirkwood add MVSATA sheevaplug support   DrEagle
• [U-Boot] [PATCH 8/8] arm kirkwood update sheevaplug defaults config   DrEagle
• [U-Boot] nds32: ag101/ag102: Inconsistent timer3 counter unit?   Kuan-Yu Kuo
• [U-Boot] [PATCH] common: board_f: Fix build error when CONFIG_TRACE is not defined   Tushar Behera
• [U-Boot] [PATCH] arm: exynos: fix clock calculation   Rajeshwari Birje
• [U-Boot] [RESEND PATCH 2/4] arm:goni:dfu Add support for DFU at GONI target   Lukasz Majewski
• [U-Boot] [U-Boot, 2/2] dfu:ext4:fix Fix DFU upload functionality   Lukasz Majewski
• [U-Boot] [PATCH] zmx25: Select CONFIG_OF_LIBFDT   Matthias Weißer
• [U-Boot] [PATCH] nds32: ag101/ag102: Fix setting lastdec and now values   Axel Lin
• [U-Boot] USB host on MPC8349 not working   Stewart Hamilton
• [U-Boot] [PATCH] cramfs: fix bug for wrong filename comparison   Holger Brunck
• [U-Boot] Porting ehci-exynos.c to handle exynos4412 (odroid-u2)   Lukasz Majewski
• [U-Boot] [PATCH v2] cramfs: fix bug for wrong filename comparison   Holger Brunck
• [U-Boot] [RESEND PATCH 4/4] arm:goni: Add support for USB mass storage   Minkyu Kang
• [U-Boot] [RESEND PATCH 2/4] arm:goni:dfu Add support for DFU at GONI target   Minkyu Kang
• [U-Boot] U-Boot + libtomcrypt   André Schaller
• [U-Boot] [U-Boot, 2/2] dfu:ext4:fix Fix DFU upload functionality   Sumit Gemini
• [U-Boot] Marvell SheevaPlug v2013.04 Refresh (ask for review)   Albert ARIBAUD
• [U-Boot] [RFC PATCH] arm: arm926ejs: flush cache before disable it   Albert ARIBAUD
• [U-Boot] [PATCH 0/7] Ethernet bringup patchset for DRA7xx EVM   Mugunthan V N
• [U-Boot] [PATCH 1/7] drivers: net: cpsw: remove hard coding bd ram for cpsw   Mugunthan V N
• [U-Boot] [PATCH 2/7] drivers: net: cpsw: Enable statistics for all port   Mugunthan V N
• [U-Boot] [PATCH 3/7] ARM: DRA7xx: Lock DPLL_GMAC   Mugunthan V N
• [U-Boot] [PATCH 4/7] ARM: DRA7xx: Enable GMAC clock control   Mugunthan V N
• [U-Boot] [PATCH 5/7] ARM: DRA7xx: Add CPSW support to DRA7xx EVM   Mugunthan V N
• [U-Boot] [PATCH 6/7] ARM: DRA7xx: Add CPSW and MDIO pinmux support   Mugunthan V N
• [U-Boot] [PATCH 7/7] ARM: DRA7xx: Enable CPSW Ethernet support   Mugunthan V N
• [U-Boot] [RFC PATCH] arm: arm926ejs: flush cache before disable it   Sughosh Ganu
• [U-Boot] [RFC PATCH] arm: arm926ejs: flush cache before disable it   Sughosh Ganu
• [U-Boot] [PATCH 4/4] arm:goni: Add support for USB mass storage   Minkyu Kang
• [U-Boot] [RFC PATCH] arm: arm926ejs: flush cache before disable it   Albert ARIBAUD
• [U-Boot] [PATCH 0/7] USB: XHCI: Add xHCI host controller stack driver   Marek Vasut
• [U-Boot] Regression due to 020bbcb "usb: hub: Power-cycle on root-hub ports"   Marek Vasut
• [U-Boot] [PATCH] usb: fix unaligned access in device_qual()   Marek Vasut
• [U-Boot] [PATCH] omap3/sys_info: fix printout of OMAP36XX L3 freqency   Andreas Bießmann
• [U-Boot] [PATCH v2 1/5] bootm: Handle errors consistently   Tom Rini
• [U-Boot] Regression due to 020bbcb "usb: hub: Power-cycle on root-hub ports"   Vivek Gautam
• [U-Boot] [RFC PATCH] arm: arm926ejs: flush cache before disable it   Sughosh Ganu
• [U-Boot] [PATCH v2 5/5] bootm: Add the missing PREP stage to bootz and correct image handling   Tom Rini
• [U-Boot] [U-Boot, 2/2] dfu:ext4:fix Fix DFU upload functionality   Tom Rini
• [U-Boot] [PATCH v2 5/5] bootm: Add the missing PREP stage to bootz and correct image handling   Robert Nelson
• [U-Boot] [PATCH v2 5/5] bootm: Add the missing PREP stage to bootz and correct image handling   Tom Rini
• [U-Boot] [PATCH 08/22] net: Add sunxi (Allwinner) wemac driver   Joe Hershberger
• [U-Boot] [PATCH 1/2] phy: export genphy_parse_link()   Joe Hershberger
• [U-Boot] [PATCH 2/2] net: add ICPlus PHY driver   Joe Hershberger
• [U-Boot] [PATCH 01/10] pxe: Use ethact setting for pxe   Joe Hershberger
• [U-Boot] [PATCH v2] pxe: try bootz if bootm fails to find a valid image   Joe Hershberger
• [U-Boot] [PATCH v4 07/10] NET: phy: add 88E1310 PHY initialization   Joe Hershberger
• [U-Boot] [PATCH v4 08/10] NET: mvgbe: add phylib support   Joe Hershberger
• [U-Boot] Regression due to 020bbcb "usb: hub: Power-cycle on root-hub ports"   Stephen Warren
• [U-Boot] [PATCH v2 08/10] NET: mvgbe: add support for Dove   Joe Hershberger
• [U-Boot] [PATCH] net: nfs: add dynamic wait period   Joe Hershberger
• [U-Boot] [PATCH v2 1/2] net/designware: Do not select MIIPORT for RGMII interface   Joe Hershberger
• [U-Boot] [PATCH v2 2/2] net/macb: Add arch specific routine to get mdio control   Joe Hershberger
• [U-Boot] [PATCH 1/2] net: make IPaddr type big endian   Joe Hershberger
• [U-Boot] [PATCH 2/2] net/tftp: sparse fixes   Joe Hershberger
• [U-Boot] [Patch v2] PHY: micrel.c: add support for KSZ9031   Joe Hershberger
• [U-Boot] [PATCH] net: Correct check for link-local target IP conflict   Joe Hershberger
• [U-Boot] [PATCH] add support for Xilinx 1000BASE-X phy (GTX)   Joe Hershberger
• [U-Boot] [PATCH] phylib: Add Atheros AR8035 GETH PHY support   Joe Hershberger
• [U-Boot] [PATCHv2] socfpga: Move board/socfpga_cyclone5 to board/socfpga   Dinh Nguyen
• [U-Boot] [Patch v2 0/3] Enable network support on at91sam9n12ek board   Joe Hershberger
• [U-Boot] [PATCH 0/3] net: macb: add support for gigabit MAC   Joe Hershberger
• [U-Boot] [PATCH v2 0/5] Improve falcon mode and am335x_evm docs   Tom Rini
• [U-Boot] [PATCH v2 1/5] README.falcon: Note how we determine if we can boot the OS or not   Tom Rini
• [U-Boot] [PATCH v2 2/5] am335x_evm: Correct DFU ALT settings for falcon mode   Tom Rini
• [U-Boot] [PATCH v2 3/5] am335x_evm: Update eMMC falcon mode locations   Tom Rini
• [U-Boot] [PATCH v2 4/5] am335x_evm: Correct CONFIG_CMD_SPL_WRITE_SIZE   Tom Rini
• [U-Boot] [PATCH v2 5/5] am335x_evm: Add basic README   Tom Rini
• [U-Boot] [PATCH 08/22] net: Add sunxi (Allwinner) wemac driver   Tom Rini
• [U-Boot] [PATCH] net: phy: supplement support for Micrel's KSZ9031   Joe Hershberger
• [U-Boot] [PATCH v4] net: add Faraday FTMAC110 10/100Mbps ethernet support   Joe Hershberger
• [U-Boot] [PATCH v4] net: update FTGMAC100 for MMU/D-cache support   Joe Hershberger
• [U-Boot] phylib: add atheros ar803x phy   Joe Hershberger
• [U-Boot] phylib: add natsemi dp83630 phy   Joe Hershberger
• [U-Boot] U-Boot + libtomcrypt   Andreas Bießmann
• [U-Boot] [PATCH 08/22] net: Add sunxi (Allwinner) wemac driver   Joe Hershberger
• [U-Boot] [PATCH 1/2] Revert "usb: hub: Parallelize power-cycling of root-hub ports"   Marek Vasut
• [U-Boot] [PATCH 2/2] Revert "usb: hub: Power-cycle on root-hub ports"   Marek Vasut
• [U-Boot] Regression due to 020bbcb "usb: hub: Power-cycle on root-hub ports"   Marek Vasut
• [U-Boot] Run a standalone application on a core other than 0   João Fernandes
• [U-Boot] Porting ehci-exynos.c to handle exynos4412 (odroid-u2)   Suriyan Ramasami
• [U-Boot] Regression due to 020bbcb "usb: hub: Power-cycle on root-hub ports"   Stephen Warren
• [U-Boot] [PATCH v5 1/1] NET: Improve TFTP booting performance when CONFIG_USB_KEYBOARD   Stephen Warren
• [U-Boot] Run a standalone application on a core other than 0   Scott Wood
• [U-Boot] [PATCH 2/2 V2] PPC MPC83xx: Fix MPC8323ERDB build warning   Wolfgang Denk
• [U-Boot] [PATCH 2/2 V2] PPC MPC83xx: Fix MPC8323ERDB build warning   Wolfgang Denk
• [U-Boot] Regression due to 020bbcb "usb: hub: Power-cycle on root-hub ports"   Marek Vasut
• [U-Boot] Regression due to 020bbcb "usb: hub: Power-cycle on root-hub ports"   Stephen Warren
• [U-Boot] [PATCH] video: consolidate splash screen alignment code   Anatolij Gustschin
• [U-Boot] [PATCH 08/22] net: Add sunxi (Allwinner) wemac driver   Tom Rini
• [U-Boot] TLB mapping for pcie mem space for fsl corenet processors   Scott Wood
• [U-Boot] Pull request: u-boot-video/master (updated)   Anatolij Gustschin
• [U-Boot] [PATCH v2 2/5] am335x_evm: Correct DFU ALT settings for falcon mode   Peter Korsgaard
• [U-Boot] [PATCH v2 3/5] am335x_evm: Update eMMC falcon mode locations   Peter Korsgaard
• [U-Boot] TLB mapping for pcie mem space for fsl corenet processors   Sughosh Ganu
• [U-Boot] [PATCH v2 5/5] am335x_evm: Add basic README   Peter Korsgaard
• [U-Boot] Porting ehci-exynos.c to handle exynos4412 (odroid-u2)   Lukasz Majewski
• [U-Boot] Regression due to 020bbcb "usb: hub: Power-cycle on root-hub ports"   Marek Vasut
• [U-Boot] Regression due to 020bbcb "usb: hub: Power-cycle on root-hub ports"   Stephen Warren
• [U-Boot] [RFC PATCH] arm: arm926ejs: flush cache before disable it   Albert ARIBAUD
• [U-Boot] [PATCHv2] socfpga: Move board/socfpga_cyclone5 to board/socfpga   Albert ARIBAUD
• [U-Boot] [PATCH] gpio: tca642x: Add the tca642x gpio expander driver   Dan Murphy
• [U-Boot] [PATCH 1/2] gpio: tca642x: Add the tca642x gpio expander driver   Dan Murphy
• [U-Boot] [PATCH 2/2] omap5: Configure the tca6424 gpio expander   Dan Murphy
• [U-Boot] [PATCH] OMAP5: USB_EHCI: Enable ehci support for omap5   Dan Murphy
• [U-Boot] [PATCH 1/3] omap5: uevm: Change the board name to correct name   Dan Murphy
• [U-Boot] [PATCH 2/3] usb: omap5-evm: Add ethernet support to the uevm   Dan Murphy
• [U-Boot] [PATCH 3/3] HACK: ehci-omap: do gpio toggle after port power is set   Dan Murphy
• [U-Boot] [PATCH 2/3] usb: omap5-evm: Add ethernet support to the uevm   Nishanth Menon
• [U-Boot] [PATCH 2/2] omap5: Configure the tca6424 gpio expander   Nishanth Menon
• [U-Boot] [PATCH 1/2] gpio: tca642x: Add the tca642x gpio expander driver   Nishanth Menon
• [U-Boot] Run a standalone application on a core other than 0   Scott Wood
• [U-Boot] [PATCH 2/2 V2] PPC MPC83xx: Fix MPC8323ERDB build warning   Timur Tabi
• [U-Boot] [PATCH v5 1/1] NET: Improve TFTP booting performance when CONFIG_USB_KEYBOARD   Joe Hershberger
• [U-Boot] [PATCH v3] net: Use ARRAY_SIZE at appropriate places   Joe Hershberger
• [U-Boot] [PATCH] net: ftmac110: cosmetics and cleanup   Joe Hershberger
• [U-Boot] [PATCHv2] socfpga: Move board/socfpga_cyclone5 to board/socfpga   Pavel Machek
• [U-Boot] [PATCH v6 03/12] nand: add Faraday FTNANDC021 NAND controller support   Scott Wood
• [U-Boot] [PATCH v6 03/12] nand: add Faraday FTNANDC021 NAND controller support   Kuo-Jung Su
• [U-Boot] [PATCH] net: ftmac110: cosmetics and cleanup   Kuo-Jung Su
• [U-Boot] [PATCH v6 03/12] nand: add Faraday FTNANDC021 NAND controller support   Scott Wood
• [U-Boot] [PATCH v6 03/12] nand: add Faraday FTNANDC021 NAND controller support   Kuo-Jung Su
• [U-Boot] [PATCH] OMAP5: USB_EHCI: Enable ehci support for omap5   Lokesh Vutla
• [U-Boot] [PATCH 2/3] usb: omap5-evm: Add ethernet support to the uevm   Lokesh Vutla
• [U-Boot] [RFC PATCH] arm: arm926ejs: flush cache before disable it   Sughosh Ganu
• [U-Boot] Implement AUART for i.MX28   Andreas Wass
• [U-Boot] [RFC PATCH] arm: arm926ejs: flush cache before disable it   Sughosh Ganu
• [U-Boot] [PATCH v2] arm: exynos: fix clock calculation   Minkyu Kang
• [U-Boot] [PATCH] ARM: omap3: Implement dpll5 (HSUSB clk) workaround for OMAP36xx/AM/DM37xx according to errata sprz318e.   Andreas Naumann
• [U-Boot] Regression due to 020bbcb "usb: hub: Power-cycle on root-hub ports"   Vivek Gautam
• [U-Boot] [PATCH v2] arm: exynos: fix clock calculation   Rajeshwari Birje
• [U-Boot] [RFC] ARM: omap3: Add option to disable errata workarounds.   Andreas Naumann
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] [RFC PATCH] arm: arm926ejs: flush cache before disable it   Albert ARIBAUD
• [U-Boot] [PATCH v2 5/5] am335x_evm: Add basic README   Lukasz Majewski
• [U-Boot] [PATCHv2] socfpga: Move board/socfpga_cyclone5 to board/socfpga   Albert ARIBAUD
• [U-Boot] [RFC] ARM: omap3: Add option to disable errata workarounds.   Albert ARIBAUD
• [U-Boot] [PATCH 1/7 v7] powerpc: deleted unused symbol CONFIG_SPL_NAND_MINIMAL and enabled some functionality for common SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 2/7 v7] powerpc: mpc85xx: Support booting from SD Card with SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 3/7 v7] powerpc: p1022ds: Enable P1022DS to boot from SD Card with SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 4/7 v7] powerpc : spi flash : Support to start from eSPI with SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 5/7 v7] powerpc : p1022ds : enable p1022ds to start from eSPI with SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 6/7 v7] NAND: TPL : introduce the TPL based on the SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 7/7 v7] powerpc: p1022ds: add TPL for p1022ds nand boot   ying.zhang at freescale.com
• [U-Boot] [PATCH 2/3] usb: omap5-evm: Add ethernet support to the uevm   Roger Quadros
• [U-Boot] [PATCH 06/10 v5] spl: env_common.c: make CONFIG_SPL_BUILD contain function env_import   Zhang Ying-B40530
• [U-Boot] [PATCH 3/3] HACK: ehci-omap: do gpio toggle after port power is set   Roger Quadros
• [U-Boot] Separately compile Master boot loader   Rajdeep Vaghasia
• [U-Boot] [RFC] ARM: omap3: Add option to disable errata workarounds.   Andreas Bießmann
• [U-Boot] [RFC] ARM: omap3: Add option to disable errata workarounds.   Albert ARIBAUD
• [U-Boot] Separately compile Master boot loader   Albert ARIBAUD
• [U-Boot] [PATCH V0 1/1] Resolve i2c compilation error for non-FDT case   amar_g
• [U-Boot] [PATCH 1/2] Revert "usb: hub: Parallelize power-cycling of root-hub ports"   Marek Vasut
• [U-Boot] [PATCH V0 1/1] Resolve i2c compilation error for non-FDT case   Minkyu Kang
• [U-Boot] [PATCH V0 1/1] Resolve i2c compilation error for non-FDT case   Amarendra Reddy
• [U-Boot] multi image kernel+ramdisk   daniel formolo
• [U-Boot] [PATCH V1 1/1] EXYNOS: Resolve the i2c compilation error for   amar_g
• [U-Boot] multi image kernel+ramdisk   daniel formolo
• [U-Boot] [PATCH V1 1/1] EXYNOS: Resolve the i2c compilation error for   Albert ARIBAUD
• [U-Boot] [RFC] ARM: omap3: Add option to disable errata workarounds.   Andreas Naumann
• [U-Boot] [RFC] ARM: omap3: Add option to disable errata workarounds.   Andreas Bießmann
• [U-Boot] [RFC] ARM: omap3: Add option to disable errata workarounds.   Peter Meerwald
• [U-Boot] [PATCH 1/2] gpio: tca642x: Add the tca642x gpio expander driver   Dan Murphy
• [U-Boot] [PATCH 2/2] omap5: Configure the tca6424 gpio expander   Dan Murphy
• [U-Boot] [PATCH 1/2] gpio: tca642x: Add the tca642x gpio expander driver   Nishanth Menon
• [U-Boot] [PATCH v2 5/5] bootm: Add the missing PREP stage to bootz and correct image handling   Tom Rini
• [U-Boot] [UBOOT] [PATCH V2 1/2] gpio: tca642x: Add the tca642x gpio expander driver   Dan Murphy
• [U-Boot] [UBOOT] [PATCH V2 2/2] gpio: omap5-uevm: Configure the tca6424 gpio expander   Dan Murphy
• [U-Boot] [PATCH v2 5/5] bootm: Add the missing PREP stage to bootz and correct image handling   Simon Glass
• [U-Boot] [PATCH 0/5] Enhance support for BeagleBone Black   Justin Waters
• [U-Boot] [PATCH 1/5] am335x_evm: Make NAND support modular   Justin Waters
• [U-Boot] [PATCH 2/5] am335x_evm: Add am335x_boneblack variant   Justin Waters
• [U-Boot] [PATCH 3/5] am335x_evm: Add command line editing   Justin Waters
• [U-Boot] [PATCH 4/5] am335x_evm: Rework bootcmd to handle two MMC devs   Justin Waters
• [U-Boot] [PATCH 5/5] Add additional MLO images to .gitignore   Justin Waters
• [U-Boot] [PATCH v2 5/5] bootm: Add the missing PREP stage to bootz and correct image handling   Tom Rini
• [U-Boot] [PATCH v2 5/5] bootm: Add the missing PREP stage to bootz and correct image handling   Robert Nelson
• [U-Boot] [PATCH 1/2] cmd_bootm.c: Make bootz consume 'bootz' from argv, decrement argc   Tom Rini
• [U-Boot] [PATCH 2/2] cmd_bootm.c: Make bootz handle BOOTM_STATE_FINDOTHER itself   Tom Rini
• [U-Boot] [PATCH 1/5] am335x_evm: Make NAND support modular   Tom Rini
• [U-Boot] twister: usb host support   Jeroen Hofstee
• [U-Boot] [PATCH 0/5] Enhance support for BeagleBone Black   Tom Rini
• [U-Boot] [PATCH 1/5] am335x_evm: Make NAND support modular   Justin Waters
• [U-Boot] [PATCH v2 5/5] bootm: Add the missing PREP stage to bootz and correct image handling   Simon Glass
• [U-Boot] [PATCH 0/5] Enhance support for BeagleBone Black   Justin Waters
• [U-Boot] [PATCH v2 5/5] bootm: Add the missing PREP stage to bootz and correct image handling   Tom Rini
• [U-Boot] [PATCH v2 5/5] bootm: Add the missing PREP stage to bootz and correct image handling   Robert Nelson
• [U-Boot] [PATCH v2 5/5] bootm: Add the missing PREP stage to bootz and correct image handling   Robert Nelson
• [U-Boot] [PATCH v2 5/5] bootm: Add the missing PREP stage to bootz and correct image handling   Simon Glass
• [U-Boot] EHCI timed out on TD - token=0x80008c80   Rao, Ravi
• [U-Boot] [PATCH]mx6qsabresd: Add splash screen support via HDMI   Pardeep Kumar Singla
• [U-Boot] Implement AUART for i.MX28   Marek Vasut
• [U-Boot] [PATCH v3 0/7] ARMv7: Add HYP mode switching support   Andre Przywara
• [U-Boot] [PATCH v3 1/7] ARM: prepare armv7.h to be included from assembly source   Andre Przywara
• [U-Boot] [PATCH v3 2/7] ARM: add secure monitor handler to switch to non-secure state   Andre Przywara
• [U-Boot] [PATCH v3 3/7] ARM: add assembly routine to switch to non-secure state   Andre Przywara
• [U-Boot] [PATCH v3 4/7] ARM: switch to non-secure state during bootm execution   Andre Przywara
• [U-Boot] [PATCH v3 5/7] ARM: add SMP support for non-secure switch   Andre Przywara
• [U-Boot] [PATCH v3 6/7] ARM: extend non-secure switch to also go into HYP mode   Andre Przywara
• [U-Boot] [PATCH v3 7/7] ARM: VExpress: enable ARMv7 virt support for VExpress A15   Andre Przywara
• [U-Boot] [RFC][PATCH] arm: Fix flush_dcache_range() on arm926   Marek Vasut
• [U-Boot] decompile u-boot.bin file   Heer Lorcan
• [U-Boot] [PATCH] video: Allocate the MXSFB framebuffer aligned   Marek Vasut
• [U-Boot] [PATCH 00/17] usb: mv_udc: Cleanup and cache ops   Marek Vasut
• [U-Boot] [PATCH 01/17] usb: mv_udc: Unbreak the mv_udc driver   Marek Vasut
• [U-Boot] [PATCH 02/17] usb: mv_udc: Clean up mv_udc.h   Marek Vasut
• [U-Boot] [PATCH 03/17] usb: mv_udc: Move endpoint array into driver data   Marek Vasut
• [U-Boot] [PATCH 04/17] usb: mv_udc: Clean up the EP initialization   Marek Vasut
• [U-Boot] [PATCH 05/17] usb: ehci: Split out struct ehci_ctrl definition   Marek Vasut
• [U-Boot] [PATCH 06/17] usb: mv_udc: Make use of struct ehci_ctrl   Marek Vasut
• [U-Boot] [PATCH 07/17] usb: mv_udc: Clean up the initial variable check   Marek Vasut
• [U-Boot] [PATCH 08/17] usb: mv_udc: Remove QH_MAXNUM macro   Marek Vasut
• [U-Boot] [PATCH 09/17] usb: mv_udc: Init mv_drv.gadget.ops statically   Marek Vasut
• [U-Boot] [PATCH 10/17] usb: mv_udc: Move QH and qTD into mv_drv   Marek Vasut
• [U-Boot] [PATCH 11/17] usb: mv_udc: Properly align the endpoint QH and qTD list   Marek Vasut
• [U-Boot] [PATCH 12/17] usb: mv_udc: Add cacheline length check   Marek Vasut
• [U-Boot] [PATCH 13/17] usb: mv_udc: Implement better QH accessor   Marek Vasut
• [U-Boot] [PATCH 14/17] usb: mv_udc: Improve allocation of qTD items   Marek Vasut
• [U-Boot] [PATCH 15/17] usb: mv_udc: Implement better qTD item accessor   Marek Vasut
• [U-Boot] [PATCH 16/17] usb: mv_udc: Add proper cache management   Marek Vasut
• [U-Boot] [PATCH 17/17] usb: mv_udc: Add bounce buffer   Marek Vasut
• [U-Boot] [PATCH v2 0/3] net: ftmac110: cosmetics and cleanup   Kuo-Jung Su
• [U-Boot] [PATCH v2 1/3] net: ftmac110: Update license statement   Kuo-Jung Su
• [U-Boot] [PATCH v2 2/3] net: ftmac110: struct ftmac110_regs __iomem * -> struct ftmac110_regs *   Kuo-Jung Su
• [U-Boot] [PATCH v2 3/3] net: ftmac110: Update tx/rx descriptor format   Kuo-Jung Su
• [U-Boot] [PATCH V1 1/1] EXYNOS: Resolve the i2c compilation error for   Minkyu Kang
• [U-Boot] [PATCH v5 1/1] NET: Improve TFTP booting performance when CONFIG_USB_KEYBOARD   Jim Lin
• [U-Boot] [PATCH v2] arm: exynos: fix clock calculation   Minkyu Kang
• [U-Boot] decompile u-boot.bin file   Graeme Russ
• [U-Boot] [PATCH 1/2] cmd_bootm.c: Make bootz consume 'bootz' from argv, decrement argc   Stephen Warren
• [U-Boot] [PATCH V1 1/1] EXYNOS: Resolve the i2c compilation error for   Amarendra Reddy
• [U-Boot] [PATCH V2 1/1] EXYNOS: Resolve the i2c compilation error for   amar_g
• [U-Boot] [PATCH V1 1/1] EXYNOS: Resolve the i2c compilation error for   Amarendra Reddy
• [U-Boot] [PATCH 0/5] Introducing SPDX-License-Identifiers   Wolfgang Denk
• [U-Boot] [PATCH 1/5] Licenses: introduce SPDX Unique Lincense Identifiers   Wolfgang Denk
• [U-Boot] Separately compile Master boot loader   Rajdeep Vaghasia
• [U-Boot] [PATCH v2 5/5] bootm: Add the missing PREP stage to bootz and correct image handling   Sughosh Ganu
• [U-Boot] [PATCH 1/2] cmd_bootm.c: Make bootz consume 'bootz' from argv, decrement argc   Simon Glass
• [U-Boot] [RFC PATCH] arm: arm926ejs: flush cache before disable it   Sughosh Ganu
• [U-Boot] [PATCH v2 5/5] bootm: Add the missing PREP stage to bootz and correct image handling   Simon Glass
• [U-Boot] net, phy: wrong 1000BASE detection with a lan9303 switch   Heiko Schocher
• [U-Boot] [PATCH v2 5/5] bootm: Add the missing PREP stage to bootz and correct image handling   Simon Glass
• [U-Boot] [PATCH v2 5/5] bootm: Add the missing PREP stage to bootz and correct image handling   Simon Glass
• [U-Boot] net, phy: wrong 1000BASE detection with a lan9303 switch   Heiko Schocher
• [U-Boot] net, phy: wrong 1000BASE detection with a lan9303 switch   Wolfgang Denk
• [U-Boot] [PATCH 0/7] qspi controller: Normal, quad and memory mapped read support   Sourav Poddar
• [U-Boot] [PATCH 0/7] qspi controller: Normal, quad and memory mapped read support   Sourav Poddar
• [U-Boot] [PATCH 1/7] omap5: add qspi support   Sourav Poddar
• [U-Boot] [PATCH 2/7] spi: add TI QSPI driver   Sourav Poddar
• [U-Boot] [PATCH 3/7] dra7xx_evm: add SPL API, QSPI, and serial flash support   Sourav Poddar
• [U-Boot] [RFC/PATCH 4/7] drivers: mtd: spi: Modify read/write command for sfl256s flash.   Sourav Poddar
• [U-Boot] [RFC/PATCH 5/7] drivers: mtd: qspi: Add quad read support   Sourav Poddar
• [U-Boot] [RFC/PATCH 6/7] driver: spi: Add memory mapped read support   Sourav Poddar
• [U-Boot] [PATCH 7/7] README: qspi usecase and testing documentation.   Sourav Poddar
• [U-Boot] net, phy: wrong 1000BASE detection with a lan9303 switch   Heiko Schocher
• [U-Boot] [PATCH V2 1/1] EXYNOS: Resolve the i2c compilation error for   Minkyu Kang
• [U-Boot] Separately compile Master boot loader   Albert ARIBAUD
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] [RFC PATCH] arm: arm926ejs: flush cache before disable it   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-video/master (updated)   Tom Rini
• [U-Boot] [PATCH v3 3/7] ARM: add assembly routine to switch to non-secure state   Nikolay Nikolaev
• [U-Boot] [PATCH v3 4/7] ARM: switch to non-secure state during bootm execution   Nikolay Nikolaev
• [U-Boot] [RFC][PATCH] arm: Fix flush_dcache_range() on arm926   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/5] bootm: Handle errors consistently   Tom Rini
• [U-Boot] [PATCH v2 2/5] bootm: Disable interrupts only when loading   Tom Rini
• [U-Boot] [PATCH 1/2] cmd_bootm.c: Make bootz consume 'bootz' from argv, decrement argc   Tom Rini
• [U-Boot] [PATCH 1/7] omap5: add qspi support   Nishanth Menon
• [U-Boot] [PATCH]mx6qsabresd: Add splash screen support via HDMI   Stefano Babic
• [U-Boot] [PATCH] video: Allocate the MXSFB framebuffer aligned   Stefano Babic
• [U-Boot] [PATCH v3] bootm: Handle errors consistently   Tom Rini
• [U-Boot] [RFC][PATCH] arm: Fix flush_dcache_range() on arm926   Marek Vasut
• [U-Boot] [PATCH 1/7] omap5: add qspi support   Lokesh Vutla
• [U-Boot] [PATCH 1/7] omap5: add qspi support   Tom Rini
• [U-Boot] [PATCH 3/7] dra7xx_evm: add SPL API, QSPI, and serial flash support   Lokesh Vutla
• [U-Boot] twister: usb host support   Stefano Babic
• [U-Boot] [PATCH] OMAP5: USB_EHCI: Enable ehci support for omap5   Dan Murphy
• [U-Boot] [PATCH] OMAP5: USB_EHCI: Enable ehci support for omap5   Dan Murphy
• [U-Boot] [PATCH v5 1/1] NET: Improve TFTP booting performance when CONFIG_USB_KEYBOARD   Stephen Warren
• [U-Boot] [PATCH 1/2] cmd_bootm.c: Make bootz consume 'bootz' from argv, decrement argc   Stephen Warren
• [U-Boot] twister: usb host support   Jeroen Hofstee
• [U-Boot] [PATCH 0/7] USB: XHCI: Add xHCI host controller stack driver   Dan Murphy
• [U-Boot] [RFC PATCH] arm: arm926ejs: flush cache before disable it   Sughosh Ganu
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH 3/3] HACK: ehci-omap: do gpio toggle after port power is set   Dan Murphy
• [U-Boot] OMAP5 USB EHCI   Dan Murphy
• [U-Boot] [[PATCH v2 1/6] omap5: uevm: Change the board name to correct name   Dan Murphy
• [U-Boot] [[PATCH v2 2/6] ARM: OMAP5: Power: Add USB LDO9 enable interface   Dan Murphy
• [U-Boot] [[PATCH v2 3/6] ARM: OMAP5: USB: Add OMAP5 common USB EHCI information   Dan Murphy
• [U-Boot] [[PATCH v2 4/6] ARM: OMAP: USB: Fix linker error when ULPI is not defined   Dan Murphy
• [U-Boot] [[PATCH v2 5/6] USB: ehci: Add a weak function for resetting devices   Dan Murphy
• [U-Boot] [[PATCH v2 6/6] ARM: OMAP5-uevm: Add USB ehci support for the uEVM   Dan Murphy
• [U-Boot] [[PATCH v3 1/2] gpio: tca642x: Add the tca642x gpio expander driver   Dan Murphy
• [U-Boot] [[PATCH v3 2/2] gpio: omap5-uevm: Configure the tca6424 gpio expander   Dan Murphy
• [U-Boot] [PATCH v3] bootm: Handle errors consistently   Simon Glass
• [U-Boot] please pull u-boot-samsung master   Albert ARIBAUD
• [U-Boot] pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [[PATCH v2 5/6] USB: ehci: Add a weak function for resetting devices   Marek Vasut
• [U-Boot] [[PATCH v2 5/6] USB: ehci: Add a weak function for resetting devices   Dan Murphy
• [U-Boot] [PATCH] image: Don't relocate ramdisk to highmem   Thierry Reding
• [U-Boot] [[PATCH v2 1/6] omap5: uevm: Change the board name to correct name   Nishanth Menon
• [U-Boot] [[PATCH v3 2/2] gpio: omap5-uevm: Configure the tca6424 gpio expander   Nishanth Menon
• [U-Boot] [PATCH 3/7] dra7xx_evm: add SPL API, QSPI, and serial flash support   Nishanth Menon
• [U-Boot] ERROR: new format image overwritten – must reset the board to recover   David Lee
• [U-Boot] [[PATCH v2 3/6] ARM: OMAP5: USB: Add OMAP5 common USB EHCI information   Lokesh Vutla
• [U-Boot] Separately compile Master boot loader   Rajdeep Vaghasia
• [U-Boot] twister: usb host support   Tapani
• [U-Boot] [PATCH v2 5/5] bootm: Add the missing PREP stage to bootz and correct image handling   Sughosh Ganu
• [U-Boot] [PATCH 0/4] Correct some remaining bootm problems   Simon Glass
• [U-Boot] [PATCH 1/4] bootm: Remove extra OK message   Simon Glass
• [U-Boot] [PATCH 2/4] blackfin: x86: bootm: Handle PREP stage of bootm   Simon Glass
• [U-Boot] [PATCH 3/4] bootm: Use selected configuration for ramdisk and fdt   Simon Glass
• [U-Boot] [PATCH 4/4] bootm: Correct the arguments for the ELF image loader   Simon Glass
• [U-Boot] [PATCH V2] p1020rdb-pd: platform support   Zhang Haijun-B42677
• [U-Boot] [PATCH 1/7] omap5: add qspi support   Sourav Poddar
• [U-Boot] [PATCH 1/7] omap5: add qspi support   Sourav Poddar
• [U-Boot] [PATCH 1/7] omap5: add qspi support   Sourav Poddar
• [U-Boot] [PATCH 3/7] dra7xx_evm: add SPL API, QSPI, and serial flash support   Sourav Poddar
• [U-Boot] [PATCH v2 5/5] bootm: Add the missing PREP stage to bootz and correct image handling   Simon Glass
• [U-Boot] [[PATCH v2 2/6] ARM: OMAP5: Power: Add USB LDO9 enable interface   Roger Quadros
• [U-Boot] [[PATCH v2 3/6] ARM: OMAP5: USB: Add OMAP5 common USB EHCI information   Roger Quadros
• [U-Boot] [[PATCH v2 5/6] USB: ehci: Add a weak function for resetting devices   Roger Quadros
• [U-Boot] twister: usb host support   Stefano Babic
• [U-Boot] [PATCH 0/2] fix 2 items for nand_dump function   Masahiro Yamada
• [U-Boot] [PATCH 1/2] cmd_nand: fix a memory leak in nand_dump function   Masahiro Yamada
• [U-Boot] [PATCH 2/2] cmd_nand: slight optimization of nand_dump function   Masahiro Yamada
• [U-Boot] [PATCH] cmd_nand: Do not show usage when scrub is aborted   Masahiro Yamada
• [U-Boot] Separately compile Master boot loader   Albert ARIBAUD
• [U-Boot] [[PATCH v2 3/6] ARM: OMAP5: USB: Add OMAP5 common USB EHCI information   Sricharan R
• [U-Boot] [[PATCH v2 3/6] ARM: OMAP5: USB: Add OMAP5 common USB EHCI information   Roger Quadros
• [U-Boot] [RFC] Multiple binaries per U-Boot target (was: Separately compile Master boot loader)   Albert ARIBAUD
• [U-Boot] [[PATCH v2 3/6] ARM: OMAP5: USB: Add OMAP5 common USB EHCI information   Sricharan R
• [U-Boot] [PATCH] image: Don't relocate ramdisk to highmem   Wolfgang Denk
• [U-Boot] Separately compile Master boot loader   Wolfgang Denk
• [U-Boot] Separately compile Master boot loader   Wolfgang Denk
• [U-Boot] Separately compile Master boot loader   Albert ARIBAUD
• [U-Boot] [PATCH v2] Fix ext2/ext4 filesystem accesses beyond 2TiB   Albert ARIBAUD
• [U-Boot] [[PATCH v2 5/6] USB: ehci: Add a weak function for resetting devices   Marek Vasut
• [U-Boot] [PATCH] image: Don't relocate ramdisk to highmem   Tom Rini
• [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.   Mark Jackson
• [U-Boot] [PATCH v1 0/7] The patchset fixes some issue in the generation of the imx image   Stefano Babic
• [U-Boot] [PATCH v1 1/7] tools: imx_header should not include flash_offset   Stefano Babic
• [U-Boot] [PATCH v1 2/7] tools: rename mximage_flash_offset to imximage_ivt_offset   Stefano Babic
• [U-Boot] [PATCH v1 3/7] tools: dynamically allocate imx_header in imximage   Stefano Babic
• [U-Boot] [PATCH v1 4/7] tools: add variable padding of data image in mkimage   Stefano Babic
• [U-Boot] [PATCH v1 5/7] tools: add padding of data image file for imximage   Stefano Babic
• [U-Boot] [PATCH v1 6/7] tools: add support for setting the CSF into imximage   Stefano Babic
• [U-Boot] [PATCH v1 7/7] imx: add status reporting for HAB status   Stefano Babic
• [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.   Tom Rini
• [U-Boot] [PATCH] cmd_bootm.c: Re-order bootm_load_os return check for ELDK4.2   Tom Rini
• [U-Boot] [[PATCH v2 2/6] ARM: OMAP5: Power: Add USB LDO9 enable interface   Dan Murphy
• [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.   Mark Jackson
• [U-Boot] [[PATCH v2 3/6] ARM: OMAP5: USB: Add OMAP5 common USB EHCI information   Dan Murphy
• [U-Boot] decompile u-boot.bin file   Marek Vasut
• [U-Boot] [PATCH v2 0/6] Enhance support for BeagleBone Black   Justin Waters
• [U-Boot] [PATCH v2 1/6] am335x_evm: Make NAND support modular   Justin Waters
• [U-Boot] [PATCH v2 2/6] am335x_evm: Add command line editing   Justin Waters
• [U-Boot] [PATCH v2 3/6] am335x_evm: Rework bootcmd to handle two MMC devs   Justin Waters
• [U-Boot] [PATCH v2 4/6] Add additional MLO images to .gitignore   Justin Waters
• [U-Boot] [PATCH v2 5/6] am335x_evm: Add support for eMMC environment   Justin Waters
• [U-Boot] [PATCH v2 6/6] am335x_evm: Add am335x_boneblack variant   Justin Waters
• [U-Boot] [[PATCH v2 5/6] USB: ehci: Add a weak function for resetting devices   Roger Quadros
• [U-Boot] [PATCH]mx6qsabresd: Add splash screen support via HDMI   Kumar Singla Pardeep-B45784
• [U-Boot] [[PATCH v3 2/2] gpio: omap5-uevm: Configure the tca6424 gpio expander   Tom Rini
• [U-Boot] [[PATCH v3 1/2] gpio: tca642x: Add the tca642x gpio expander driver   Tom Rini
• [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.   Albert ARIBAUD
• [U-Boot] [[PATCH v2 3/6] ARM: OMAP5: USB: Add OMAP5 common USB EHCI information   Tom Rini
• [U-Boot] [[PATCH v2 6/6] ARM: OMAP5-uevm: Add USB ehci support for the uEVM   Tom Rini
• [U-Boot] ERROR: new format image overwritten ? must reset the board to recover   Tom Rini
• [U-Boot] [PATCH] image: Don't relocate ramdisk to highmem   Thierry Reding
• [U-Boot] [[PATCH v3 2/2] gpio: omap5-uevm: Configure the tca6424 gpio expander   Dan Murphy
• [U-Boot] [[PATCH v3 1/2] gpio: tca642x: Add the tca642x gpio expander driver   Dan Murphy
• [U-Boot] [PATCH 0/6] ARM: AM43xx: Add Support for AM43xx Soc's   Lokesh Vutla
• [U-Boot] [PATCH 1/6] ARM: AM43xx: Add Board files   Lokesh Vutla
• [U-Boot] [PATCH 2/6] ARM: AM43xx: Add header files   Lokesh Vutla
• [U-Boot] [PATCH 3/6] ARM: AM43xx: clocks: Add dpll and clock data   Lokesh Vutla
• [U-Boot] [PATCH 4/6] ARM: OMAP: Add CONFIG_OMAP_COMMON   Lokesh Vutla
• [U-Boot] [PATCH 5/6] ARM: AM43xx: Add build support   Lokesh Vutla
• [U-Boot] [PATCH 6/6] ARM: AM43xx: Add config file   Lokesh Vutla
• [U-Boot] [PATCH] net: fec: Remove bogus flush_dcache_range() call   Marek Vasut
• [U-Boot] [[PATCH v2 5/6] USB: ehci: Add a weak function for resetting devices   Dan Murphy
• [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.   Tom Rini
• [U-Boot] [[PATCH v3 2/2] gpio: omap5-uevm: Configure the tca6424 gpio expander   Dan Murphy
• [U-Boot] [[PATCH v2 5/6] USB: ehci: Add a weak function for resetting devices   Marek Vasut
• [U-Boot] AM335x: env_{flash,nowhere} compile conflict   Mark Jackson
• [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.   Albert ARIBAUD
• [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.   Albert ARIBAUD
• [U-Boot] [PATCH] OpenRD: relocate environment to 640kB   Tom Rini
• [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.   Tom Rini
• [U-Boot] Porting ehci-exynos.c to handle exynos4412 (odroid-u2)   Suriyan Ramasami
• [U-Boot] SPL size issues on OMAP4   Michael Cashwell
• [U-Boot] [PATCH v1 7/7] imx: add status reporting for HAB status   Fabio Estevam
• [U-Boot] SPL size issues on OMAP4   Tom Rini
• [U-Boot] [PATCH] OpenRD: relocate environment to 640kB   Albert ARIBAUD
• [U-Boot] [[PATCH v3 2/2] gpio: omap5-uevm: Configure the tca6424 gpio expander   Nishanth Menon
• [U-Boot] [PATCH] OpenRD: relocate environment to 640kB   Tom Rini
• [U-Boot] [PATCH v3 1/2] gpio: tca642x: Add the tca642x gpio expander driver   Dan Murphy
• [U-Boot] [PATCH v3 2/2] gpio: omap5-uevm: Configure the tca6424 gpio expander   Dan Murphy
• [U-Boot] [PATCH v1 0/7] The patchset fixes some issue in the generation of the imx image   Otavio Salvador
• [U-Boot] [PATCH v1 6/7] tools: add support for setting the CSF into imximage   Wolfgang Denk
• [U-Boot] [PATCH v1 0/7] The patchset fixes some issue in the generation of the imx image   Eric Nelson
• [U-Boot] [PATCH] image: Don't relocate ramdisk to highmem   Wolfgang Denk
• [U-Boot] [PATCH v1 3/7] tools: dynamically allocate imx_header in imximage   Marek Vasut
• [U-Boot] [PATCH] image: Don't relocate ramdisk to highmem   Tom Rini
• [U-Boot] [PATCH v1 7/7] imx: add status reporting for HAB status   Marek Vasut
• [U-Boot] [PATCH] image: Don't relocate ramdisk to highmem   Stephen Warren
• [U-Boot] [PATCH] image: Don't relocate ramdisk to highmem   Thierry Reding
• [U-Boot] U-boot timeout with KSZ8021 phy   Alexandre Pereira da Silva
• [U-Boot] U-boot timeout with KSZ8021 phy   Marek Vasut
• [U-Boot] U-boot timeout with KSZ8021 phy   Alexandre Pereira da Silva
• [U-Boot] [PATCH 0/5] Introducing SPDX-License-Identifiers   Marek Vasut
• [U-Boot] U-boot timeout with KSZ8021 phy   Marek Vasut
• [U-Boot] [PATCH v1 0/7] The patchset fixes some issue in the generation of the imx image   Eric Nelson
• [U-Boot] [PATCH] image: Don't relocate ramdisk to highmem   Wolfgang Denk
• [U-Boot] [PATCH] image: Don't relocate ramdisk to highmem   Wolfgang Denk
• [PATCH V4] omap3_beagle: support findfdt and loadfdt for devicetree support   Nishanth Menon
• [U-Boot] [PATCH 0/5] omap3_beagle: configs: improve BOOT_CMD options   Nishanth Menon
• [U-Boot] [PATCH 1/5] omap3_beagle: remove JFFS2 support.   Nishanth Menon
• [U-Boot] [PATCH 2/5] omap3_beagle: replace uImage.beagle with generic uImage   Nishanth Menon
• [U-Boot] [PATCH 3/5] omap3_beagle: enable CMD_FS_GENERIC and simplify load of image/ramdisk   Nishanth Menon
• [U-Boot] [PATCH 4/5] omap3_beagle: support findfdt and loadfdt for devicetree support   Nishanth Menon
• [U-Boot] [PATCH 5/5] omap3_beagle: support booting from zImage and device tree as last option   Nishanth Menon
• [U-Boot] pull request for u-boot-tegra/master into ARM/master   Tom Warren
• [U-Boot] [PATCH 4/5] omap3_beagle: support findfdt and loadfdt for devicetree support   Robert Nelson
• [U-Boot] [PATCH 4/5] omap3_beagle: support findfdt and loadfdt for devicetree support   Nishanth Menon
• [U-Boot] [PATCH 4/5] omap3_beagle: support findfdt and loadfdt for devicetree support   Robert Nelson
• [U-Boot] [PATCH 4/5] omap3_beagle: support findfdt and loadfdt for devicetree support   Nishanth Menon
• [U-Boot] [PATCH V2 0/6] omap3_beagle: configs: improve BOOT_CMD options   Nishanth Menon
• [U-Boot] [PATCH V2 1/6] omap3_beagle: remove JFFS2 support.   Nishanth Menon
• [U-Boot] [PATCH V2 2/6] omap3_beagle: replace uImage.beagle with generic uImage   Nishanth Menon
• [U-Boot] [PATCH V2 3/6] beagleboard: remove RevB support for BeagleBoard Xm   Nishanth Menon
• [U-Boot] [PATCH V2 4/6] omap3_beagle: enable CMD_FS_GENERIC and simplify load of image/ramdisk   Nishanth Menon
• [U-Boot] [PATCH V2 5/6] omap3_beagle: support findfdt and loadfdt for devicetree support   Nishanth Menon
• [U-Boot] [PATCH V2 6/6] omap3_beagle: support booting from zImage and device tree as last option   Nishanth Menon
• [U-Boot] [PATCH V2 5/6] omap3_beagle: support findfdt and loadfdt for devicetree support   Nishanth Menon
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Marek Vasut
• [U-Boot] [PATCH 4/5] omap3_beagle: support findfdt and loadfdt for devicetree support   Robert Nelson
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Fabio Estevam
• [U-Boot] [PATCH] nand_util: delete a useless variable   Masahiro Yamada
• [U-Boot] [PATCH 2/2] phy: smsc: LAN8710/8720 are not Gbit PHYs   Fabio Estevam
• [U-Boot] [PATCH 1/5] omap3_beagle: remove JFFS2 support.   Joel Fernandes
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Alexandre Pereira da Silva
• [U-Boot] [PATCH 1/5] omap3_beagle: remove JFFS2 support.   Nishanth Menon
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Marek Vasut
• [U-Boot] U-boot timeout with KSZ8021 phy   Alexandre Pereira da Silva
• [U-Boot] [PATCH 4/5] omap3_beagle: support findfdt and loadfdt for devicetree support   Nishanth Menon
• [U-Boot] U-boot timeout with KSZ8021 phy   Marek Vasut
• [U-Boot] [PATCH 1/5] omap3_beagle: remove JFFS2 support.   Joel Fernandes
• [U-Boot] [PATCH] mx28evk: Convert to phylib framework   Fabio Estevam
• [U-Boot] [PATCH 1/5] omap3_beagle: remove JFFS2 support.   Nishanth Menon
• [U-Boot] U-boot timeout with KSZ8021 phy   Alexandre Pereira da Silva
• [U-Boot] [PATCH] mx28evk: Convert to phylib framework   Marek Vasut
• [U-Boot] U-boot timeout with KSZ8021 phy   Marek Vasut
• [U-Boot] [PATCH] mx28evk: Convert to phylib framework   Fabio Estevam
• [U-Boot] [PATCH 2/2] phy: smsc: LAN8710/8720 are not Gbit PHYs   Joe Hershberger
• [U-Boot] [PATCH] mx28evk: Convert to phylib framework   Marek Vasut
• [U-Boot] [PATCH] mx28evk: Convert to phylib framework   Alexandre Pereira da Silva
• [U-Boot] [PATCH 2/2] phy: smsc: LAN8710/8720 are not Gbit PHYs   Joe Hershberger
• [U-Boot] [PATCH 2/2] phy: smsc: LAN8710/8720 are not Gbit PHYs   Fabio Estevam
• [U-Boot] [PATCH 2/2] phy: smsc: LAN8710/8720 are not Gbit PHYs   Joe Hershberger
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Albert ARIBAUD
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Albert ARIBAUD
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Stefano Babic
• [U-Boot] [PATCH 2/2] phy: smsc: LAN8710/8720 are not Gbit PHYs   Stefano Babic
• [U-Boot] [PATCH] m28evk: add trimffs to nand command   Stefano Babic
• [U-Boot] [PATCH] net: fec: Remove bogus flush_dcache_range() call   Stefano Babic
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Stefano Babic
• [U-Boot] [RFC PATCH] arm: arm926ejs: flush cache before disable it   Albert ARIBAUD
• [U-Boot] [PATCH 5/6] mx51evk: Change default environment to cope with OE changes   Stefano Babic
• [U-Boot] [PATCH 0/6] Upstream environment changes being used in Yocto/OE   Stefano Babic
• [U-Boot] pull request for u-boot-tegra/master into ARM/master   Albert ARIBAUD
• [U-Boot] [PATCH v2 5/5] bootm: Add the missing PREP stage to bootz and correct image handling   Sughosh Ganu
• [U-Boot] [PATCH v1 7/7] imx: add status reporting for HAB status   Stefano Babic
• [U-Boot] [PATCH 2/4] blackfin: x86: bootm: Handle PREP stage of bootm   Sughosh Ganu
• [U-Boot] [PATCH v6 0/3] Add TI816X EVM support   TENART Antoine
• [U-Boot] [PATCH v1 7/7] imx: add status reporting for HAB status   Stefano Babic
• [U-Boot] [PATCH v1 6/7] tools: add support for setting the CSF into imximage   Stefano Babic
• [U-Boot] [PATCH 1/3] spi: bfin_spi: Use DIV_ROUND_UP instead of open-coded   Axel Lin
• [U-Boot] [PATCH 2/3] spi: fsl_espi: Use DIV_ROUND_UP instead of open-coded   Axel Lin
• [U-Boot] [PATCH 3/3] spi: mpc8xxx_spi: Use DIV_ROUND_UP instead of open-coded   Axel Lin
• [U-Boot] [PULL] : Please pull u-boot-imx   Stefano Babic
• [U-Boot] SPL size issues on OMAP4   Michael Trimarchi
• [U-Boot] [PATCH 0/6] Upstream environment changes being used in Yocto/OE   Fabio Estevam
• [U-Boot] [PATCH 0/6] Upstream environment changes being used in Yocto/OE   Stefano Babic
• [U-Boot] [PULL] : Updated: Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PULL] : Updated: Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/6] am335x_evm: Make NAND support modular   Stefan Agner
• [U-Boot] [PATCH] README.mx28_common: Rename it to README.mxs   Fabio Estevam
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Hector Palacios
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Fabio Estevam
• [U-Boot] [PATCH] mx28evk: Convert to phylib framework   Marek Vasut
• [U-Boot] [PATCH] README.mx28_common: Rename it to README.mxs   Marek Vasut
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Marek Vasut
• [U-Boot] [PULL] : Updated: Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Marek Vasut
• [U-Boot] UPDATED: pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH] tools: fix FIT image with ramdisk   Stefano Babic
• [U-Boot] [PATCH] tools: fix FIT image with ramdisk   Albert ARIBAUD
• [U-Boot] [PATCH V2] mtd: mxc_nand: Fix crash after MTD resync   Marek Vasut
• [U-Boot] [PATCH 4/5] omap3_beagle: support findfdt and loadfdt for devicetree support   Robert Nelson
• [U-Boot] [PATCH 4/5] omap3_beagle: support findfdt and loadfdt for devicetree support   Nishanth Menon
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Hector Palacios
• [U-Boot] [PATCH V2 0/6] omap3_beagle: configs: improve BOOT_CMD options   Tom Rini
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Albert ARIBAUD
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Marek Vasut
• [U-Boot] [PATCH v2 5/5] bootm: Add the missing PREP stage to bootz and correct image handling   Simon Glass
• [U-Boot] [PATCH] arm:exynos:fix: Fix clock calculation for Exynos4210 based targets.   Lukasz Majewski
• [U-Boot] [[PATCH v3 2/2] gpio: omap5-uevm: Configure the tca6424 gpio expander   Dan Murphy
• [U-Boot] regression:Exynos4: Clock calculation fix   Lukasz Majewski
• [U-Boot] [PATCH] Fix memory stomper in DFU. Loop NULL-initted one past allocated array size.   mboards at prograde.net
• [U-Boot] [ANN] v2013.07 _not_ on Monday   Tom Rini
• [U-Boot] [ANN] v2013.07 _not_ on Monday   Otavio Salvador
• [U-Boot] [PATCH 0/5] Introducing SPDX-License-Identifiers   Roger Meier
• [U-Boot] [PATCH] Fix memory stomper in DFU. Loop NULL-initted one past allocated array size.   Lukasz Majewski
• [U-Boot] RAMBOOT   Saridakis, Dean (US SSA)
• [U-Boot] SPL size issues on OMAP4   Michael Cashwell
• [U-Boot] [PATCH V2] mtd: mxc_nand: Fix crash after MTD resync   Scott Wood
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] SPL size issues on OMAP4   Michael Trimarchi
• [U-Boot] Pull request: nand flash   Tom Rini
• [U-Boot] [PATCH 0/4] Correct some remaining bootm problems   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PATCH v3] bootm: Handle errors consistently   Tom Rini
• [U-Boot] [PATCH] cmd_bootm.c: Re-order bootm_load_os return check for ELDK4.2   Tom Rini
• [U-Boot] UPDATED: pull request: u-boot-arm/master   Tom Rini
• [U-Boot] [PATCH] tools: fix FIT image with ramdisk   Tom Rini
• [U-Boot] [ANN] v2013.07-rc3   Tom Rini
• [U-Boot] [PATCH 6/7 v7] NAND: TPL : introduce the TPL based on the SPL   Scott Wood
• [U-Boot] [[PATCH v3 2/2] gpio: omap5-uevm: Configure the tca6424 gpio expander   Nishanth Menon
• [U-Boot] [PATCH V2] mtd: mxc_nand: Fix crash after MTD resync   Marek Vasut
• [U-Boot] [PATCH 1/2] mx6: Factor out common HDMI setup code   Pardeep Kumar Singla
• [U-Boot] [PATCH 2/2] mx6qsabresd: Add splash screen support via HDMI   Pardeep Kumar Singla
• [U-Boot] How to?   Kristoffer Grundström
• [U-Boot] [PATCH] usb: Use well-known descriptor sizes when parsing configuration   Julius Werner
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Troy Kisky
• [U-Boot] [ANN] v2013.07-rc3   Stephen Warren
• [U-Boot] [PATCH v8 3/3] MIPS: Jz4740: Add qi_lb60 board support   Dirk Behme
• [U-Boot] [PATCH] tools: fix FIT image with ramdisk   Albert ARIBAUD
• [U-Boot] [PATCH] usb: Use well-known descriptor sizes when parsing configuration   Albert ARIBAUD
• [U-Boot] [PATCH] arm:exynos:fix: Fix clock calculation for Exynos4210 based targets.   Minkyu Kang
• [U-Boot] [PATCH] tools: fix FIT image with ramdisk   Stefano Babic
• [U-Boot] [PATCH] ppc: mpc8323erdb: Fix compiler warning   Marek Vasut
• [U-Boot] [PATCH v2 0/6] Enhance support for BeagleBone Black   Stefan Agner
• [U-Boot] [PATCH] tools: fix FIT image with ramdisk   Wolfgang Denk
• [U-Boot] [PATCH] tools: fix FIT image with ramdisk   Tom Rini
• [U-Boot] [PATCH] tools: fix FIT image with ramdisk   Stephen Warren
• [U-Boot] [PATCH] tools: fix FIT image with ramdisk   Tom Rini
• [U-Boot] [PATCH v2] blackfin: Fix using gd->baudrate before setting its value   Axel Lin
• [U-Boot] [PATCH v2 1/1] patman: README documentation nits (unit test)   Gerhard Sittig
• [U-Boot] Patman failure on Linux Mint 14   Gerhard Sittig
• [U-Boot] [PATCH 1/2] mx6: Factor out common HDMI setup code   Eric Nelson
• [U-Boot] [PATCH 2/2 V3] PPC MPC83xx: Fix MPC8323ERDB build warning   Wolfgang Denk
• [U-Boot] [PATCH] ppc: mpc8323erdb: Fix compiler warning   Wolfgang Denk
• [U-Boot] [PATCH 2/2 V2] PPC MPC83xx: Fix MPC8323ERDB build warning   Wolfgang Denk
• [U-Boot] [PATCH v2 1/1] patman: README documentation nits (unit test)   Simon Glass
• [U-Boot] [PATCH 1/1] OMAP3: igep00x0: allow booting with a FDT from MMC   Javier Martinez Canillas
• [U-Boot] [PATCH 2/2 V3] PPC MPC83xx: Fix MPC8323ERDB build warning   Timur Tabi
• [U-Boot] [PATCH] ppc: mpc8323erdb: Fix compiler warning   Marek Vasut
• [U-Boot] [PATCH] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x   Fabio Estevam
• [U-Boot] [PATCH] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x   Otavio Salvador
• [U-Boot] [PATCH v2] blackfin: Fix using gd->baudrate before setting its value   Zhang, Sonic
• [U-Boot] [PATCH] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x   Fabio Estevam
• [U-Boot] [PATCH] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x   Otavio Salvador
• [U-Boot] [[PATCH v2 5/6] USB: ehci: Add a weak function for resetting devices   Marek Vasut
• [U-Boot] [PATCH] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x   Eric Nelson
• [U-Boot] [PATCH] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x   Fabio Estevam
• [U-Boot] random compile error "unrecognized command line option '-mshort-load-bytes'" with arm-eabi-gcc 4.6.x   Yingchun Li
• [U-Boot] Patman failure on Linux Mint 14   Stefano Babic
• [U-Boot] [PATCH] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x   Stefano Babic
• [U-Boot] [PATCH 1/1] OMAP3: igep00x0: allow booting with a FDT from MMC   Enric Balletbo Serra
• [U-Boot] [PATCH 1/3] spi: bfin_spi: Use DIV_ROUND_UP instead of open-coded   Sonic Zhang
• [U-Boot] [PATCH 1/1] OMAP3: igep00x0: allow booting with a FDT from MMC   Javier Martinez Canillas
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Hector Palacios
• [U-Boot] [PATCH] OpenRD: relocate environment to 640kB   Sascha Silbe
• [U-Boot] [PATCH 1/7 v8] powerpc: deleted unused symbol CONFIG_SPL_NAND_MINIMAL and enabled some functionality for common SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 2/7 v8] powerpc: mpc85xx: Support booting from SD Card with SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 3/7 v8] powerpc: p1022ds: Enable P1022DS to boot from SD Card with SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 4/7 v8] powerpc : spi flash : Support to start from eSPI with SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 5/7 v8] powerpc : p1022ds : enable p1022ds to start from eSPI with SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 6/7 v8] NAND: TPL : introduce the TPL based on the SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 7/7 v8] powerpc: p1022ds: add TPL for p1022ds nand boot   ying.zhang at freescale.com
• [U-Boot] [PATCH 1/2] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Heiko Schocher
• [U-Boot] [U-boot] uboot.lst file question   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH v3] drivers:power:max77686: add function to set voltage and mode   Piotr Wilczek
• [U-Boot] [PATCH] drivers/mmc/dw_mmc - remove extra arch specific "asm/arch/clk.h" inclusion   Alexey Brodkin
• [U-Boot] [PATCH] OpenRD: relocate environment to 640kB   Albert ARIBAUD
• [U-Boot] [PATCH V3 0/6] omap3_beagle: configs: improve BOOT_CMD options   Nishanth Menon
• [U-Boot] [PATCH V3 1/6] omap3_beagle: remove JFFS2 support.   Nishanth Menon
• [U-Boot] [PATCH V3 2/6] omap3_beagle: replace uImage.beagle with generic uImage   Nishanth Menon
• [U-Boot] [PATCH V3 3/6] beagleboard: remove RevB support for BeagleBoard Xm   Nishanth Menon
• [U-Boot] [PATCH V3 4/6] omap3_beagle: enable CMD_FS_GENERIC and simplify load of image/ramdisk   Nishanth Menon
• [U-Boot] [PATCH V3 5/6] omap3_beagle: support findfdt and loadfdt for devicetree support   Nishanth Menon
• [U-Boot] [PATCH V3 6/6] omap3_beagle: support booting from zImage and device tree as last option   Nishanth Menon
• [U-Boot] [PATCH V3 5/6] omap3_beagle: support findfdt and loadfdt for devicetree support   Koen Kooi
• [U-Boot] [PATCH] OpenRD: relocate environment to 640kB   Tom Rini
• [U-Boot] [PATCH V3 5/6] omap3_beagle: support findfdt and loadfdt for devicetree support   Nishanth Menon
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Marek Vasut
• [U-Boot] random compile error "unrecognized command line option '-mshort-load-bytes'" with arm-eabi-gcc 4.6.x   Yingchun Li
• [U-Boot] [PATCH V3 5/6] omap3_beagle: support findfdt and loadfdt for devicetree support   Koen Kooi
• [U-Boot] [U-boot] uboot.lst file question   Albert ARIBAUD
• [U-Boot] [PATCH] Revert "MIPS: Jz4740: Add qi_lb60 board support"   Tom Rini
• [U-Boot] [U-boot] uboot.lst file question   Gerhard Sittig
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Albert ARIBAUD
• [U-Boot] [U-boot] uboot.lst file question   Gerhard Sittig
• [U-Boot] [PATCH] fsl_esdhc: Touch only relevant sys ctrl bits   Dirk Behme
• [U-Boot] [PATCH] mxc_gpio: Correct the GPIO handling in gpio_direction_output()   Dirk Behme
• [U-Boot] [PATCH v8 3/3] MIPS: Jz4740: Add qi_lb60 board support   Tom Rini
• [U-Boot] [PATCH V3 5/6] omap3_beagle: support findfdt and loadfdt for devicetree support   Nishanth Menon
• [U-Boot] [PATCH] arm:samsung:trats:fix: Restore proper orientation of TRATS's LCD panel   Lukasz Majewski
• [U-Boot] [PATCH] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x   Eric Nelson
• [U-Boot] [PATCH 1/3] arm: spl: Fix SPL booting for OMAP3   Tom Rini
• [U-Boot] [PATCH v2 1/6] am335x_evm: Make NAND support modular   Justin Waters
• [U-Boot] [PATCH v3] drivers:power:max77686: add function to set voltage and mode   Tom Rini
• [U-Boot] [PATCH V3 5/6] omap3_beagle: support findfdt and loadfdt for devicetree support   Tom Rini
• [U-Boot] [PATCH V3 5/6] omap3_beagle: support findfdt and loadfdt for devicetree support   Koen Kooi
• [U-Boot] Antwort: Re: [PATCH] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x   Stephan Bauroth
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Hector Palacios
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Marek Vasut
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Hector Palacios
• [U-Boot] Antwort: Re: [PATCH] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x   Eric Nelson
• [U-Boot] [PATCH] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x   Fabio Estevam
• [U-Boot] [PATCH] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x   Eric Nelson
• [U-Boot] [PATCH v2 1/1] patman: README documentation nits (unit test)   Tom Rini
• [U-Boot] [ANN] v2013.07-rc3   Stephen Warren
• [U-Boot] [PATCH] arm: omap5_uevm: Correct the console sys prompt for 5432   Tom Rini
• [U-Boot] [PATCH v2] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x   Fabio Estevam
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Troy Kisky
• [U-Boot] [PATCH v2] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x   Otavio Salvador
• [U-Boot] [PATCH v2] mpc83xx: add support for mpc8306   Matevz Langus
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Troy Kisky
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Albert ARIBAUD
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Albert ARIBAUD
• [U-Boot] [ANN] v2013.07-rc2   Tom Rini
• [U-Boot] [PATCH 0/5] Introducing SPDX-License-Identifiers   Stephen Warren
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Troy Kisky
• [U-Boot] [PATCH 6/7 v8] NAND: TPL : introduce the TPL based on the SPL   Scott Wood
• [U-Boot] [PATCH] arm:exynos:fix: Fix clock calculation for Exynos4210 based targets.   Simon Glass
• [U-Boot] [PATCH] arm:samsung:trats:fix: Restore proper orientation of TRATS's LCD panel   Minkyu Kang
• [U-Boot] [U-boot] uboot.lst file question   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Fabio Estevam
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Fabio Estevam
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Marek Vasut
• [U-Boot] [PATCH v2] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Heiko Schocher
• [U-Boot] [PATCH v2] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Marek Vasut
• [U-Boot] [PATCH v2] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Heiko Schocher
• [U-Boot] [ANN] v2013.07-rc2   Stefan Roese
• [U-Boot] [PATCH 1/3] arm: spl: Fix SPL booting for OMAP3   Stefan Roese
• [U-Boot] [ANN] v2013.07-rc2   Dirk Eibach
• [U-Boot] [PATCH] mxc_gpio: Correct the GPIO handling in gpio_direction_output()   Stefano Babic
• [U-Boot] [PATCH v2] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Lukasz Majewski
• [U-Boot] [RFC] Improve bootargs for IGEP boards.   Enric Balletbo Serra
• [U-Boot] [PATCH v2] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Heiko Schocher
• [U-Boot] [U-Boot, RFC] ext4fs: le32_to_cpu() used on a 16-bit field   Rommel Custodio
• [U-Boot] [PATCH v2] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Lukasz Majewski
• [U-Boot] [U-Boot, RFC] ext4fs: le32_to_cpu() used on a 16-bit field   Lukasz Majewski
• [U-Boot] [PATCH 6/7 v8] NAND: TPL : introduce the TPL based on the SPL   Zhang Ying-B40530
• [U-Boot] Setting Ethernet Speed in NFS boot   Wolfgang Denk
• [U-Boot] [PATCH] SPL: Limit image name print length   Taras Kondratiuk
• [U-Boot] standalone-examples: support custom GCC lib   Jack Mitchell
• [U-Boot] [PATCH] standalone-examples: support custom GCC lib   Jack Mitchell
• [U-Boot] [ANN] v2013.07-rc2   Fleming Andy-AFLEMING
• [U-Boot] [PATCH 1/3] arm: spl: Fix SPL booting for OMAP3   Tom Rini
• [U-Boot] [U-Boot, 2/2, V3] PPC MPC83xx: Fix MPC8323ERDB build warning   Tom Rini
• [U-Boot] arm:exynos:fix: Fix clock calculation for Exynos4210 based targets.   Tom Rini
• [U-Boot] arm:samsung:trats:fix: Restore proper orientation of TRATS's LCD panel   Tom Rini
• [U-Boot] scsi: Correct types of scsi_read/write()   Tom Rini
• [U-Boot] [U-Boot, v2, 1/1] patman: README documentation nits (unit test)   Tom Rini
• [U-Boot] [U-Boot, v2] cramfs: fix bug for wrong filename comparison   Tom Rini
• [U-Boot] [U-Boot, v2] Fix ext2/ext4 filesystem accesses beyond 2TiB   Tom Rini
• [U-Boot] common: remove unaligned access error in bootmenu_getoption()   Tom Rini
• [U-Boot] [PATCH] Revert "MIPS: Jz4740: Add qi_lb60 board support"   Tom Rini
• [U-Boot] [ANN] v2013.07-rc3   Tom Rini
• [U-Boot] [PATCH] fsl_esdhc: Touch only relevant sys ctrl bits   Stefano Babic
• [U-Boot] [PATCH v2] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Tom Rini
• [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution   Lukasz Majewski
• [U-Boot] [PATCH] README.mx28_common: Rename it to README.mxs   Fabio Estevam
• [U-Boot] [PATCH v2] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Heiko Schocher
• [U-Boot] [ANN] v2013.07-rc3   Lukasz Majewski
• [U-Boot] [PATCH v2] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x   Eric Nelson
• [U-Boot] [PATCH 6/7 v8] NAND: TPL : introduce the TPL based on the SPL   Scott Wood
• [U-Boot] [[PATCH v2 5/6] USB: ehci: Add a weak function for resetting devices   Dan Murphy
• [U-Boot] [PATCH RFC V1 00/18] Make mv_udc work for i.mx6   Troy Kisky
• [U-Boot] [PATCH RFC V1 01/18] Add functions for use with i.mx6 otg udc   Troy Kisky
• [U-Boot] [PATCH RFC V1 02/18] mx6: iomux: add GPR1 defines   Troy Kisky
• [U-Boot] [PATCH RFC V1 03/18] mx6: define OTG_BASE_ADDR   Troy Kisky
• [U-Boot] [PATCH RFC V1 04/18] nitrogen6x: add otg usb ethernet gadget support   Troy Kisky
• [U-Boot] [PATCH RFC V1 05/18] nitrogen6x: add CONFIG_MV_UDC   Troy Kisky
• [U-Boot] [PATCH RFC V1 06/18] usb: gadget: config: fix unaligned access issues   Troy Kisky
• [U-Boot] [PATCH RFC V1 07/18] usb: gadget: mv_udc: set udc after controller.udc is initialized   Troy Kisky
• [U-Boot] [PATCH RFC V1 08/18] usb: gadget: mv_udc: add MX6Q specific reset   Troy Kisky
• [U-Boot] [PATCH RFC V1 09/18] usb: gadget: ether set wMaxPacketSize   Troy Kisky
• [U-Boot] [PATCH RFC V1 10/18] usb: gadget: ether: return error from rx_submit if no request   Troy Kisky
• [U-Boot] [PATCH RFC V1 11/18] usb: gadget: mv_udc: split mv_udc.h file   Troy Kisky
• [U-Boot] [PATCH RFC V1 12/18] usb: udc: add udc.h include file   Troy Kisky
• [U-Boot] [PATCH RFC V1 13/18] usb: gadget: mv_udc: fix typo in error message   Troy Kisky
• [U-Boot] [PATCH RFC V1 14/18] usb: gadget: mv_udc: use static initialization of ops, udc   Troy Kisky
• [U-Boot] [PATCH RFC V1 15/18] usb: gadget: mv_udc: set is_dualspeed = 1   Troy Kisky
• [U-Boot] [PATCH RFC V1 16/18] usb: gadget: mv_udc: fix full speed connections   Troy Kisky
• [U-Boot] [PATCH RFC V1 17/18] usb: gadget: mv_udc: fix cache issues   Troy Kisky
• [U-Boot] [PATCH RFC V1 18/18] usb: gadget: mv_udc: clear desc upon ep_disable   Troy Kisky
• [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution   Tormod Volden
• [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution   Lukasz Majewski
• [U-Boot] i.MX6 DRAM_RESET documentation   Troy Kisky
• [U-Boot] How to create a library with already built library   Julyberry
• [U-Boot] [PATCH v2] board/p1010rdb: add pin mux and sdhc support in any boot   Andy Fleming
• [U-Boot] [U-Boot, v7, 1/5] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey   Andy Fleming
• [U-Boot] [U-Boot, v7, 2/5] i2c: fsl_i2c: i2c_read(): dont try to write address w/ alen=0   Andy Fleming
• [U-Boot] [U-Boot,v7,3/5] Add Atmel I2C tpm   Andy Fleming
• [U-Boot] [U-Boot, v7, 4/5] Build arch/$ARCH/lib/bootm.o depending on CONFIG_CMD_BOOTM   Andy Fleming
• [U-Boot] [U-Boot, v7, 5/5] mpc85xx: Add gdsys ControlCenter Digital board   Andy Fleming
• [U-Boot] [U-Boot, v3] powerpc/mpc85xx:Disable Debug TLB entry for non-minimal SPL   Andy Fleming
• [U-Boot] Please pull u-boot-mpc85xx.git   Andy Fleming
• [U-Boot] [U-Boot, RFC] ext4fs: le32_to_cpu() used on a 16-bit field   Rommel Custodio
• [U-Boot] Please pull u-boot-mmc.git   Andy Fleming
• [U-Boot] Powerpc: eSDHC: Fix mmc read write err in uboot of T4240QDS board   Andy Fleming
• [U-Boot] drivers/mmc/dw_mmc - remove extra arch specific "asm/arch/clk.h" inclusion   Andy Fleming
• [U-Boot] fsl_esdhc: Touch only relevant sys ctrl bits   Andy Fleming
• [U-Boot] [PATCH RFC V1 10/18] usb: gadget: ether: return error from rx_submit if no request   Troy Kisky
• [U-Boot] i.MX6 DRAM_RESET documentation   Liu Hui-R64343
• [U-Boot] [PATCH RFC V1 00/18] Make mv_udc work for i.mx6   Marek Vasut
• [U-Boot] [PATCH RFC V1 06/18] usb: gadget: config: fix unaligned access issues   Marek Vasut
• [U-Boot] [PATCH RFC V1 03/18] mx6: define OTG_BASE_ADDR   Marek Vasut
• [U-Boot] [PATCH 1/3] bootm: Move fixup_silent_linux() earlier in the bootm stages   Simon Glass
• [U-Boot] [PATCH 2/3] RFC: bootm: Add silent_linux environment variable   Simon Glass
• [U-Boot] [PATCH 3/3] image: Display FIT timestamp when booting   Simon Glass
• [U-Boot] [PATCH 1/3] bootm: Move fixup_silent_linux() earlier in the bootm stages   Simon Glass
• [U-Boot] PCIe support for Tegra T30 ?   Thierry Reding
• [U-Boot] standalone-examples: support custom GCC lib   Albert ARIBAUD
• [U-Boot] How to create a library with already built library   Albert ARIBAUD
• [U-Boot] [PATCH v2] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x   Albert ARIBAUD
• [U-Boot] [PATCH v2] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x   Stefano Babic
• [U-Boot] U-boot & x86 & coreboot   Rossier Daniel
• [U-Boot] standalone-examples: support custom GCC lib   Jack Mitchell
• [U-Boot] [PATCH v2] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x   Albert ARIBAUD
• [U-Boot] [PATCH] arm: at91sam9n12: change EBI IO to high drive mode   Bo Shen
• [U-Boot] [PATCH v2] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x   Stefano Babic
• [U-Boot] [PATCH] README.mx28_common: Rename it to README.mxs   Stefano Babic
• [U-Boot] [PATCH] README.mx28_common: Rename it to README.mxs   Albert ARIBAUD
• [U-Boot] [PATCH] arm: at91sam9n12: change EBI IO to high drive mode   Albert ARIBAUD
• [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution   Heiko Schocher
• [U-Boot] [PATCH] arm: at91sam9n12: change EBI IO to high drive mode   Bo Shen
• [U-Boot] [PATCH] arm: at91sam9n12: change EBI IO to high drive mode   Albert ARIBAUD
• [U-Boot] [PATCH] arm: at91sam9n12: change EBI IO to high drive mode   Michael Cashwell
• [U-Boot] [PATCH 2/8] arm: spl: Do not set the stack pointer twice   Masahiro Yamada
• [U-Boot] [PATCH] arm: spl: Do not set the stack pointer twice   Masahiro Yamada
• [U-Boot] [PATCH 2/8] arm: spl: Do not set the stack pointer twice   Masahiro Yamada
• [U-Boot] [U-boot] failed to boot an compressed u-boot.bin   TigerLiu at viatech.com.cn
• [U-Boot] [U-boot] failed to boot an compressed u-boot.bin   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH] README.mx28_common: Rename it to README.mxs   Fabio Estevam
• [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.   Mark Jackson
• [U-Boot] [PATCH] arm: at91sam9n12: change EBI IO to high drive mode   Albert ARIBAUD
• [U-Boot] [U-boot] failed to boot an compressed u-boot.bin   Albert ARIBAUD
• [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.   Tom Rini
• [U-Boot] U-boot & x86 & coreboot   Rossier Daniel
• [U-Boot] i.MX6 DRAM_RESET documentation   Eric Nelson
• [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution   Lukasz Majewski
• [U-Boot] [PATCH 1/3] bootm: Move fixup_silent_linux() earlier in the bootm stages   Tom Rini
• [U-Boot] [PATCH] README.mx28_common: Rename it to README.mxs   Tom Rini
• [U-Boot] Please pull u-boot-mpc85xx.git   Tom Rini
• [U-Boot] Please pull u-boot-mmc.git   Tom Rini
• [U-Boot] Please pull u-boot-mpc85xx.git   Tom Rini
• [U-Boot] U-boot & x86 & coreboot   Simon Glass
• [U-Boot] U-boot & x86 & coreboot   Simon Glass
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Hector Palacios
• [U-Boot] [PATCH 0/1] Add NAND to board/ti/am335x/README   Tom Rini
• [U-Boot] [PATCH 1/1] board/ti/am335x/README: Document NAND programming   Tom Rini
• [U-Boot] [PATCH] arm: at91sam9n12: change EBI IO to high drive mode   Michael Cashwell
• [U-Boot] [PATCH] nds32: Enable FPU if the version of CPU supported   Kuan-Yu Kuo
• [U-Boot] i.MX6 DRAM_RESET documentation   Troy Kisky
• [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution   Tormod Volden
• [U-Boot] [PATCH RFC V1 00/18] Make mv_udc work for i.mx6   Troy Kisky
• [U-Boot] How to create a library with already built library   Julyberry
• [U-Boot] [PATCH RFC V1 00/18] Make mv_udc work for i.mx6   Marek Vasut
• [U-Boot] [PATCH 1/1] ddr cfg: DRAM_RESET needs 0x00020030   Troy Kisky
• [U-Boot] OMAP5 uEVM USB eHCI patch set   Dan Murphy
• [U-Boot] [PATCH v3 1/7] omap5: uevm: Change the board name to correct name   Dan Murphy
• [U-Boot] [PATCH v3 2/7] ARM: OMAP5: USB: Add OMAP5 common USB EHCI information   Dan Murphy
• [U-Boot] [PATCH v3 3/7] ARM: OMAP: USB: Fix linker error when ULPI is not defined   Dan Murphy
• [U-Boot] [PATCH v3 4/7] ARM: OMAP5-uevm: Add USB ehci support for the uEVM   Dan Murphy
• [U-Boot] [PATCH v3 5/7] ARM: OMAP5-uevm: Add USB MAC ethernet address   Dan Murphy
• [U-Boot] [PATCH v3 6/7] USB: usb-hub: Add a weak function for resetting devices   Dan Murphy
• [U-Boot] [PATCH v3 7/7] ARM: OMAP5-uevm: Add usb device reset API   Dan Murphy
• [U-Boot] [PATCH 1/5] am335x_evm: Make NAND support modular   Scott Wood
• [U-Boot] [PATCH 1/5] am335x_evm: Make NAND support modular   Scott Wood
• [U-Boot] FW: U-boot & x86 & coreboot   Rossier Daniel
• [U-Boot] FW: U-boot & x86 & coreboot   Rossier Daniel
• [U-Boot] [PATCH 1/1] board/ti/am335x/README: Document NAND programming   Scott Wood
• [U-Boot] FW: U-boot & x86 & coreboot   Simon Glass
• [U-Boot] [PATCH 1/1] board/ti/am335x/README: Document NAND programming   Tom Rini
• [U-Boot] [PATCH] mkimage: Use board config to get CONFIG_FIT_SIGNATURE value   Simon Glass
• [U-Boot] [PATCH] mkimage: Use board config to get CONFIG_FIT_SIGNATURE value   Simon Glass
• [U-Boot] [PATCH v3 2/2] env_nand.c: support falling back to redundant env when writing   Scott Wood
• [U-Boot] [PATCH v2] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Scott Wood
• [U-Boot] [PATCH v2] usb: Use well-known descriptor sizes when parsing configuration   Julius Werner
• [U-Boot] [U-boot] failed to boot an compressed u-boot.bin   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Marek Vasut
• [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution   Marek Vasut
• [U-Boot] [PATCH v3 1/7] omap5: uevm: Change the board name to correct name   Marek Vasut
• [U-Boot] [PATCH v3 3/7] ARM: OMAP: USB: Fix linker error when ULPI is not defined   Marek Vasut
• [U-Boot] [RFC] ARM-optimized memcpy/memset on SPL build   Masahiro Yamada
• [U-Boot] [U-boot] failed to boot an compressed u-boot.bin   Wolfgang Denk
• [U-Boot] [PATCH v3 5/7] ARM: OMAP5-uevm: Add USB MAC ethernet address   Marek Vasut
• [U-Boot] [PATCH v3 6/7] USB: usb-hub: Add a weak function for resetting devices   Marek Vasut
• [U-Boot] [PATCH v3 7/7] ARM: OMAP5-uevm: Add usb device reset API   Marek Vasut
• [U-Boot] [U-boot] failed to boot an compressed u-boot.bin   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH v2] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Heiko Schocher
• [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution   Heiko Schocher
• [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution   Heiko Schocher
• [U-Boot] [PATCH v3] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Heiko Schocher
• [U-Boot] Boot Linux kernel with initramfs fails   Axel Lin
• [U-Boot] How to create a library with already built library   Albert ARIBAUD
• [U-Boot] [PATCH v3] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Lukasz Majewski
• [U-Boot] [PATCH v3 2/7] ARM: OMAP5: USB: Add OMAP5 common USB EHCI information   Roger Quadros
• [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution   Lukasz Majewski
• [U-Boot] [PATCH] nds32: Enable FPU if the version of CPU supported   uboot at andestech.com
• [U-Boot] [PATCH] fs: fat: fix bug when write size is less than a sector size   Josh Wu
• [U-Boot] [U-boot] failed to boot an compressed u-boot.bin   Wolfgang Denk
• [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution   Wolfgang Denk
• [U-Boot] Boot Linux kernel with initramfs fails   Wolfgang Denk
• [U-Boot] [PATCH] fs: fat: fix bug when write size is less than a sector size   Wolfgang Denk
• [U-Boot] [PATCH 1/1] net: phy/realtek: Add support for RTL8211DN and RTL8211E phy modules   Bhupesh Sharma
• [U-Boot] [U-boot] failed to boot an compressed u-boot.bin   TigerLiu at viatech.com.cn
• [U-Boot] Ethernet support broken for Wandboard Quad on master   Sascha Silbe
• [U-Boot] Ethernet support broken for Wandboard Quad on master   Sascha Silbe
• [U-Boot] [PATCH 6/7 v8] NAND: TPL : introduce the TPL based on the SPL   Zhang Ying-B40530
• [U-Boot] [PATCH] arm:trats:fix: Correction of loaddtb environment variable.   Lukasz Majewski
• [U-Boot] [PATCH] dfu: Implementation of target reset after communication with dfu-util's -R switch   Lukasz Majewski
• [U-Boot] Ethernet support broken for Wandboard Quad on master   Fabio Estevam
• [U-Boot] Ethernet support broken for Wandboard Quad on master   Fabio Estevam
• [U-Boot] Ethernet support broken for Wandboard Quad on master   Charles Coldwell
• [U-Boot] [U-boot] failed to boot an compressed u-boot.bin   Wolfgang Denk
• [U-Boot] [PATCH] arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12   Piotr Wilczek
• [U-Boot] [PATCH v6 1/2] console: usb: kbd: To improve TFTP booting performance   Jim Lin
• [U-Boot] [PATCH v6 2/2] NET: Add net_busy_flag   Jim Lin
• [U-Boot] [PATCH v6 1/2] console: usb: kbd: To improve TFTP booting performance   Marek Vasut
• [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution   Marek Vasut
• [U-Boot] [PATCH v3 5/7] ARM: OMAP5-uevm: Add USB MAC ethernet address   Dan Murphy
• [U-Boot] Ethernet support broken for Wandboard Quad on master   Fabio Estevam
• [U-Boot] [PATCH v3 5/7] ARM: OMAP5-uevm: Add USB MAC ethernet address   Marek Vasut
• [U-Boot] Ethernet support broken for Wandboard Quad on master   Charles Coldwell
• [U-Boot] [PATCH V3 5/6] omap3_beagle: support findfdt and loadfdt for devicetree support   Tom Rini
• [U-Boot] [RFC] Improve bootargs for IGEP boards.   Tom Rini
• [U-Boot] Ethernet support broken for Wandboard Quad on master   Fabio Estevam
• [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution   Tom Rini
• [U-Boot] Ethernet support broken for Wandboard Quad on master   Fabio Estevam
• [U-Boot] [PATCH v2] usb: Use well-known descriptor sizes when parsing configuration   Albert ARIBAUD
• [U-Boot] Ethernet support broken for Wandboard Quad on master   Fabio Estevam
• [U-Boot] [PATCH v2] usb: Use well-known descriptor sizes when parsing configuration   Julius Werner
• [U-Boot] USB host on MPC8349 not working   Mehresh Ramneek-B31383
• [U-Boot] [PATCH v6 1/2] console: usb: kbd: To improve TFTP booting performance   Stephen Warren
• [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution   Michael Cashwell
• [U-Boot] [PATCH v6 2/2] NET: Add net_busy_flag   Stephen Warren
• [U-Boot] [PATCH v3 2/7] ARM: OMAP5: USB: Add OMAP5 common USB EHCI information   Dan Murphy
• [U-Boot] [PATCH v2] usb: Use well-known descriptor sizes when parsing configuration   Marek Vasut
• [U-Boot] [PATCH V3 5/6] omap3_beagle: support findfdt and loadfdt for devicetree support   Nishanth Menon
• [U-Boot] [PATCH v2] usb: Use well-known descriptor sizes when parsing configuration   Marek Vasut
• [U-Boot] [PATCH v4 0/8] am335x: NOR support   Tom Rini
• [U-Boot] [PATCH v4 1/8] am335x_evm: Drop useless CONFIG_ENV_IS_NOWHERE   Tom Rini
• [U-Boot] [PATCH v4 2/8] am335x_evm: Update SPI_BOOT support, add MTDPARTS info   Tom Rini
• [U-Boot] [PATCH v4 3/8] am335x_evm: Only set CONFIG_NAND when !CONFIG_SPI_BOOT   Tom Rini
• [U-Boot] [PATCH v4 4/8] am335x_evm: Rework board_is_foo() checks   Tom Rini
• [U-Boot] [PATCH v4 5/8] am33xx: Correct gpmc_cfg->irqstatus/enable   Tom Rini
• [U-Boot] [PATCH v4 6/8] am335x_evm: Add support for the NOR module on the memory cape   Tom Rini
• [U-Boot] [PATCH v4 7/8] am335x_evm: Add support to boot from NOR.   Tom Rini
• [U-Boot] [PATCH v4 8/8] board/ti/am335x/README: Document NOR programming   Tom Rini
• [U-Boot] [PATCH 1/2] ARM: tegra: Make cache line size SoC specific   Thierry Reding
• [U-Boot] [PATCH 2/2] ARM: tegra: Enable data cache on Dalmore   Thierry Reding
• [U-Boot] [PATCH v4 7/8] am335x_evm: Add support to boot from NOR.   Albert ARIBAUD
• [U-Boot] [PATCH v2] usb: Use well-known descriptor sizes when parsing configuration   Julius Werner
• [U-Boot] [PATCH v4 7/8] am335x_evm: Add support to boot from NOR.   Tom Rini
• [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution   Lukasz Majewski
• [U-Boot] [PATCH 0/7] USB: XHCI: Add xHCI host controller stack driver   Julius Werner
• [U-Boot] [PATCH] net: phy: Fix networking regression on some mx6 boards   Fabio Estevam
• [U-Boot] [PATCH] net: phy: Fix networking regression on some mx6 boards   Fabio Estevam
• [U-Boot] [PATCH 1/2] ARM: tegra: Make cache line size SoC specific   Stephen Warren
• [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution   Tom Rini
• [U-Boot] [PATCH v6 2/2] NET: Add net_busy_flag   Marek Vasut
• [U-Boot] [PATCH v2] usb: Use well-known descriptor sizes when parsing configuration   Marek Vasut
• [U-Boot] [PATCH] arm: at91sam9n12: change EBI IO to high drive mode   Bo Shen
• [U-Boot] [PATCH] net: phy: Fix networking regression on some mx6 boards   Otavio Salvador
• [U-Boot] [PATCH 1/2] ARM: tegra: Make cache line size SoC specific   Thierry Reding
• [U-Boot] [PATCH] dfu: Implementation of target reset after communication with dfu-util's -R switch   Heiko Schocher
• [U-Boot] [PATCH v4] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Heiko Schocher
• [U-Boot] [PATCH 1/2] ARM: tegra: Make cache line size SoC specific   Stephen Warren
• [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution   Heiko Schocher
• [U-Boot] [PATCH] arm:trats:fix: Correction of loaddtb environment variable.   Minkyu Kang
• [U-Boot] [U-boot] failed to boot an compressed u-boot.bin   Minkyu Kang
• [U-Boot] [PATCH] arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12   Minkyu Kang
• [U-Boot] [PATCH v6 1/2] console: usb: kbd: To improve TFTP booting performance   Wolfgang Denk
• [U-Boot] [PATCH v4] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Lukasz Majewski
• [U-Boot] [PATCH] arm: at91sam9n12: change EBI IO to high drive mode   Albert ARIBAUD
• [U-Boot] [U-boot] failed to boot an compressed u-boot.bin   TigerLiu at viatech.com.cn
• [U-Boot] [U-Boot, RFC] ext4fs: le32_to_cpu() used on a 16-bit field   Lukasz Majewski
• [U-Boot] U-boot & x86 & coreboot   Rossier Daniel
• [U-Boot] When will the ARMv8 bootloader be released?   Zhang Heron
• [U-Boot] [PATCH] mmc: sdhci: use the SDHCI_QUIRK_USE_WIDE8 for samsung SoC   Jaehoon Chung
• [U-Boot] [PATCH 0/3] ARM: tegra: add nvec keyboard support for paz00   Andrey Danin
• [U-Boot] [PATCH 1/3] ARM: tegra: add nvec driver   Andrey Danin
• [U-Boot] [PATCH 2/3] ARM: tegra: add input driver for nvec keyboard   Andrey Danin
• [U-Boot] [PATCH 3/3] ARM: tegra: paz00: enable nvec keyboard support   Andrey Danin
• [U-Boot] [U-boot] failed to boot an compressed u-boot.bin   Albert ARIBAUD
• [U-Boot] 答复: [U-boot] failed to boot an compressed u-boot.bin   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH v3 2/7] ARM: OMAP5: USB: Add OMAP5 common USB EHCI information   Roger Quadros
• [U-Boot] [PATCH v7 1/2] NET: Add net_busy_flag if CONFIG_USB_KEYBOARD is defined   Jim Lin
• [U-Boot] [PATCH v7 2/2] console: usb: kbd: To improve TFTP booting performance   Jim Lin
• [U-Boot] [PATCH] fs: fat: fix bug when write size is less than a sector size   Josh Wu
• [U-Boot] [PATCH v3 2/2] env_nand.c: support falling back to redundant env when writing   Phil Sutter
• [U-Boot] [PATCH] env_nand.c: support falling back to redundant env when writing   Phil Sutter
• [U-Boot] Ethernet support broken for Wandboard Quad on master   Sascha Silbe
• [U-Boot] [PATCH] env_nand.c: support falling back to redundant env when writing   Phil Sutter
• [U-Boot] [PATCH v7 2/2] console: usb: kbd: To improve TFTP booting performance   Wolfgang Denk
• [U-Boot] [PATCH] fs: fat: fix bug when write size is less than a sector size   Wolfgang Denk
• [U-Boot] [U-boot] failed to boot an compressed u-boot.bin   Albert ARIBAUD
• [U-Boot] [PATCH v7 2/2] console: usb: kbd: To improve TFTP booting performance   Jim Lin
• [U-Boot] [PATCH] arm: at91sam9n12: change EBI IO to high drive mode   Tom Rini
• [U-Boot] When will the ARMv8 bootloader be released?   Tom Rini
• [U-Boot] [PATCH] arm:trats:fix: Correction of loaddtb environment variable.   Tom Rini
• [U-Boot] [PATCH] fs/ext4: caculate log2blksz from blksz, other its value = 0   Dennis Lan (dlan)
• [U-Boot] Ethernet support broken for Wandboard Quad on master   Fabio Estevam
• [U-Boot] Ethernet support broken for Wandboard Quad on master   Tom Rini
• [U-Boot] [PATCH] net: phy: Set SUPPORTED_1000baseX_Half flag in ESTATUS_1000_XHALF case   Fabio Estevam
• [U-Boot] [PATCH] mkimage: Use board config to get CONFIG_FIT_SIGNATURE value   Tom Rini
• [U-Boot] [PATCH v7 2/2] console: usb: kbd: To improve TFTP booting performance   Marek Vasut
• [U-Boot] [PATCH v4] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Marek Vasut
• [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution   Marek Vasut
• [U-Boot] [PATCH] fs/ext4: caculate log2blksz from blksz, other its value = 0   Albert ARIBAUD
• [U-Boot] [PATCH] net: phy: Set SUPPORTED_1000baseX_Half flag in ESTATUS_1000_XHALF case   Charles Coldwell
• [U-Boot] [PATCH] net: phy: Set SUPPORTED_1000baseX_Half flag in ESTATUS_1000_XHALF case   Fabio Estevam
• [U-Boot] Ethernet support broken for Wandboard Quad on master   Charles Coldwell
• [U-Boot] [PATCH] net: phy: Set SUPPORTED_1000baseX_Half flag in ESTATUS_1000_XHALF case   Charles Coldwell
• [U-Boot] [RFC] Multiple binaries per U-Boot target   Sascha Silbe
• [U-Boot] [PATCH] net: phy: Set SUPPORTED_1000baseX_Half flag in ESTATUS_1000_XHALF case   Sascha Silbe
• [U-Boot] U-boot & x86 & coreboot   Simon Glass
• [U-Boot] [PATCH 1/3] ARM: tegra: add nvec driver   Tom Warren
• [U-Boot] [RFC] Multiple binaries per U-Boot target   Simon Glass
• [U-Boot] [PATCH] net: phy: Set SUPPORTED_1000baseX_Half flag in ESTATUS_1000_XHALF case   Tom Rini
• [U-Boot] [PATCH] net: phy: Set SUPPORTED_1000baseX_Half flag in ESTATUS_1000_XHALF case   Charles Coldwell
• [U-Boot] [PATCH 0/7] USB: XHCI: Add xHCI host controller stack driver   Dan Murphy
• [U-Boot] [RFC] Multiple binaries per U-Boot target   Albert ARIBAUD
• [U-Boot] Ethernet support broken for Wandboard Quad on master   Joe Hershberger
• [U-Boot] [RFC] Multiple binaries per U-Boot target   Simon Glass
• [U-Boot] [PATCH] net: phy: Set SUPPORTED_1000baseX_Half flag in ESTATUS_1000_XHALF case   Joe Hershberger
• [U-Boot] [PATCH] fixing wrong termination of string   Rossier Daniel
• [U-Boot] [PATCH 1/6] spl/Makefile: Add drivers/power/pmic/libpmic to CONFIG_SPL_POWER_SUPPORT   Tom Rini
• [U-Boot] [PATCH 2/6] drivers/power/pmic: Add tps65217 driver   Tom Rini
• [U-Boot] [PATCH 3/6] drivers/power/pmic: Add tps65910 driver   Tom Rini
• [U-Boot] [PATCH 4/6] am33xx: Add am33xx_spl_board_init function, call   Tom Rini
• [U-Boot] [PATCH 5/6] am33xx: Add the efuse_sma CONTROL_MODULE register   Tom Rini
• [U-Boot] [PATCH 6/6] am335x_evm: am33xx_spl_board_init function and scale core frequency   Tom Rini
• [U-Boot] [Ac100] [PATCH 3/3] ARM: tegra: paz00: enable nvec keyboard support   Stephen Warren
• [U-Boot] [PATCH] net: phy: Set SUPPORTED_1000baseX_Half flag in ESTATUS_1000_XHALF case   Fabio Estevam
• [U-Boot] [RFC] Multiple binaries per U-Boot target   Wolfgang Denk
• [U-Boot] [RFC] Multiple binaries per U-Boot target   Wolfgang Denk
• [U-Boot] [PATCH 6/6] am335x_evm: am33xx_spl_board_init function and scale core frequency   Enric Balletbo Serra
• [U-Boot] [PATCH 6/6] am335x_evm: am33xx_spl_board_init function and scale core frequency   Tom Rini
• [U-Boot] [PATCH v2] usb: Use well-known descriptor sizes when parsing configuration   Julius Werner
• [U-Boot] [PATCH v3] usb: Use well-known descriptor sizes when parsing configuration   Julius Werner
• [U-Boot] [PATCH 6/6] am335x_evm: am33xx_spl_board_init function and scale core frequency   Tom Rini
• [U-Boot] [PATCH 1/1] ddr cfg: DRAM_RESET needs 0x00020030   Fabio Estevam
• [U-Boot] [PATCH v3] usb: Use well-known descriptor sizes when parsing configuration   Albert ARIBAUD
• [U-Boot] [RFC] Multiple binaries per U-Boot target   Albert ARIBAUD
• [U-Boot] [PATCH] net: phy: Set SUPPORTED_1000baseX_Half flag in ESTATUS_1000_XHALF case   Tom Rini
• [U-Boot] Ethernet support broken for Wandboard Quad on master   Tom Rini
• [U-Boot] [PATCH 1/1] ddr cfg: DRAM_RESET needs 0x00020030   Troy Kisky
• [U-Boot] [PATCH 1/1] ddr cfg: DRAM_RESET needs 0x00020030   Tom Rini
• [U-Boot] [PATCH 1/1] ddr cfg: DRAM_RESET needs 0x00020030   Fabio Estevam
• [U-Boot] [PATCH 1/1] ddr cfg: DRAM_RESET needs 0x00020030   Fabio Estevam
• [U-Boot] [RFC] Multiple binaries per U-Boot target   Wolfgang Denk
• [U-Boot] [PATCH 6/7 v8] NAND: TPL : introduce the TPL based on the SPL   Scott Wood
• [U-Boot] [PATCH V2] fs/ext4: fix log2blksz un-initialized error, by cacaulating its value from blksz   Lan Yixun (dlan)
• [U-Boot] [RFC] Multiple binaries per U-Boot target   Albert ARIBAUD
• [PATCH, RESEND] ext4fs: le32_to_cpu() used on a 16-bit field   Rommel G Custodio
• [U-Boot] PATCH, RESEND] ext4fs: le32_to_cpu() used on a 16-bit field   Rommel G Custodio
• [U-Boot] [Ac100] [PATCH 3/3] ARM: tegra: paz00: enable nveckeyboard support   Marc Dietrich
• [U-Boot] PATCH, RESEND] ext4fs: le32_to_cpu() used on a 16-bit field   Albert ARIBAUD
• [U-Boot] [PATCH 1/1] ddr cfg: DRAM_RESET needs 0x00020030   Stefano Babic
• [U-Boot] [PATCH 1/1] ddr cfg: DRAM_RESET needs 0x00020030   Tom Rini
• [U-Boot] [PATCH] common: board_f: Fix build error when CONFIG_TRACE is not defined   Simon Glass
• [U-Boot] [PATCH] wandboard: Use splash image at screen center by default   Otavio Salvador
• [U-Boot] [PATCH] tools: fix FIT image with ramdisk   Simon Glass
• [U-Boot] tdphette   Thad Phetteplace
• [U-Boot] [PATCH] tools: fix FIT image with ramdisk   Tom Rini
• [U-Boot] [PATCH] arm: at91sam9n12: change EBI IO to high drive mode   Andreas Bießmann
• [U-Boot] [PATCH] tools: fix FIT image with ramdisk   Simon Glass
• [U-Boot] [PATCH] tools: fix FIT image with ramdisk   Tom Rini
• [U-Boot] [PATCH] common: board_f: Fix build error when CONFIG_TRACE is not defined   Simon Glass
• [U-Boot] [PATCH v2] usb: Use well-known descriptor sizes when parsing configuration   Marek Vasut
• [U-Boot] [Ac100] [PATCH 3/3] ARM: tegra: paz00: enable nveckeyboard support   Stephen Warren
• [U-Boot] Fwd: New device tree mailing list   Stephen Warren
• [U-Boot] [U-Boot, RFC] ext4fs: le32_to_cpu() used on a 16-bit field   Simon Glass
• [U-Boot] [U-Boot, RFC] ext4fs: le32_to_cpu() used on a 16-bit field   Andreas Bießmann
• [U-Boot] [PATCH 0/1] ext4 fixes for BE machine   Andreas Bießmann
• [U-Boot] [PATCH] ext4fs: le32_to_cpu() used on a 16-bit field   Andreas Bießmann
• [U-Boot] can u-boot NFS mount my beaglebone rootfs over USB tether?   Robert P. J. Day
• [U-Boot] can u-boot NFS mount my beaglebone rootfs over USB tether?   Albert ARIBAUD
• [U-Boot] can u-boot NFS mount my beaglebone rootfs over USB tether?   Robert P. J. Day
• [U-Boot] can u-boot NFS mount my beaglebone rootfs over USB tether?   Albert ARIBAUD
• [U-Boot] can u-boot NFS mount my beaglebone rootfs over USB tether?   Robert P. J. Day
• [U-Boot] [PATCH] ext4fs: le32_to_cpu() used on a 16-bit field   Simon Glass
• [U-Boot] [PATCH 0/1] ext4 fixes for BE machine   Simon Glass
• [U-Boot] [PATCH] fixing wrong termination of string   Simon Glass
• [U-Boot] [PATCH 0/1] ext4 fixes for BE machine   Rommel G Custodio
• [U-Boot] can u-boot NFS mount my beaglebone rootfs over USB tether?   Robert P. J. Day
• [U-Boot] [PATCH] arm:samsung:serial: Extract common Samsung UART code   Lukasz Majewski
• [U-Boot] [PATCH] arm:samsung:timer: Move common timer related code to ./samsung-common/ directory   Lukasz Majewski
• [U-Boot] can u-boot NFS mount my beaglebone rootfs over USB tether?   Tom Rini
• [U-Boot] can u-boot NFS mount my beaglebone rootfs over USB tether?   Robert P. J. Day
• [U-Boot] can u-boot NFS mount my beaglebone rootfs over USB tether?   Tom Rini
• [U-Boot] [U-boot] failed to boot an compressed u-boot.bin   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH] arm: at91sam9n12: change EBI IO to high drive mode   Bo Shen
• [U-Boot] [PATCH 1/1] ddr cfg: DRAM_RESET needs 0x00020030   Dirk Behme
• [U-Boot] [PATCH] ext4fs: le32_to_cpu() used on a 16-bit field   Lukasz Majewski
• [U-Boot] [PATCH] ext4fs: le32_to_cpu() used on a 16-bit field   Andreas Bießmann
• [U-Boot] [Ac100] [PATCH 3/3] ARM: tegra: paz00: enable nveckeyboardsupport   Marc Dietrich
• [U-Boot] [PATCH] usb: ehci-omap: Don't softreset USB High-speed Host (UHH) Module   Roger Quadros
• [U-Boot] [PATCH] usb: ehci-omap: Don't softreset USB High-speed Host (UHH) Module   Stefan Roese
• [U-Boot] [PATCH] usb: ehci-omap: Don't softreset USB High-speed Host (UHH) Module   Marek Vasut
• [U-Boot] [U-boot] shell script syntax   TigerLiu at viatech.com.cn
• [U-Boot] [U-boot] shell script syntax   Albert ARIBAUD
• [U-Boot] [U-boot] shell script syntax   TigerLiu at viatech.com.cn
• [U-Boot] [U-boot] shell script syntax   Albert ARIBAUD
• [U-Boot] [U-boot] shell script syntax   TigerLiu at viatech.com.cn
• [U-Boot] [U-boot] shell script syntax   Albert ARIBAUD
• [U-Boot] [U-boot] shell script syntax   James Chargin
• [U-Boot] arm: at91sam9n12: change EBI IO to high drive mode   Tom Rini
• [U-Boot] ext4fs: le32_to_cpu() used on a 16-bit field   Tom Rini
• [U-Boot] [U-Boot, V2] fs/ext4: fix log2blksz un-initialized error, by cacaulating its value from blksz   Tom Rini
• [U-Boot] [PATCH v2 4/6] am33xx: Add am33xx_spl_board_init function, call   Tom Rini
• [U-Boot] [PATCH] am335x:Handle worst case scenario for Errata 1.0.24   Tom Rini
• [U-Boot] [PATCH] am335x:Handle worst case scenario for Errata 1.0.24   Lokesh Vutla
• [U-Boot] [PATCH v3 2/7] ARM: OMAP5: USB: Add OMAP5 common USB EHCI information   Tom Rini
• [U-Boot] [PATCH v3 4/7] ARM: OMAP5-uevm: Add USB ehci support for the uEVM   Tom Rini
• [U-Boot] [PATCH] am335x:Handle worst case scenario for Errata 1.0.24   Tom Rini
• [U-Boot] [UBOOT] [PATCH V2 1/2] gpio: tca642x: Add the tca642x gpio expander driver   Tom Rini
• [U-Boot] [UBOOT] [PATCH V2 2/2] gpio: omap5-uevm: Configure the tca6424 gpio expander   Tom Rini
• [U-Boot] [PATCH] powerpc/mpc8xxx: Fix TIMING_CFG_3[EXT_ACTTOPRE]   York Sun
• [U-Boot] [ANN] U-Boot v2013.07 released   Tom Rini
• [U-Boot] [PATCH] imx: nitrogen6x: mx6qsabrelite: Add support for DVI monitors   Robert Winkler
• [U-Boot] [PATCH v3] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Scott Wood
• [U-Boot] [PATCH v4] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Scott Wood
• [U-Boot] Steps to make u-boot binary which can be booted as RAMBOOT   ranju
• [U-Boot] [ANN] U-Boot v2013.07 released   Albert ARIBAUD
• [U-Boot] [ANN] U-Boot v2013.07 released   Wolfgang Denk
• [U-Boot] Steps to make u-boot binary which can be booted as RAMBOOT   Albert ARIBAUD
• [U-Boot] [RFC] Improve bootargs for IGEP boards.   Enric Balletbo Serra
• [U-Boot] [RFC] Improve bootargs for IGEP boards.   Enric Balletbo Serra
• [U-Boot] [PATCH 1/1] net: phy/realtek: Add support for RTL8211DN and RTL8211E phy modules   Sharma Bhupesh-B45370
• [U-Boot] [PATCHv2 0/8] qspi controller: Normal, quad and memory mapped read support   Sourav Poddar
• [U-Boot] [PATCHv2 1/8] omap5: add qspi support   Sourav Poddar
• [U-Boot] [PATCHv2 2/8] armv7: hw_data: change clock divider setting.   Sourav Poddar
• [U-Boot] [PATCHv2 3/8] spi: add TI QSPI driver   Sourav Poddar
• [U-Boot] [PATCHv2 4/8] dra7xx_evm: add SPL API, QSPI, and serial flash support   Sourav Poddar
• [U-Boot] [PATCHv2 5/8] drivers: mtd: spi: Modify read/write command for sfl256s flash.   Sourav Poddar
• [U-Boot] [PATCHv2 6/8] drivers: mtd: qspi: Add quad read support   Sourav Poddar
• [U-Boot] [PATCHv2 7/8] driver: spi: Add memory mapped read support   Sourav Poddar
• [U-Boot] [PATCHv2 8/8] README: qspi usecase and testing documentation.   Sourav Poddar
• [U-Boot] [PATCH 1/7 v9] powerpc: deleted unused symbol CONFIG_SPL_NAND_MINIMAL and enabled some functionality for common SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 2/7 v9] powerpc: mpc85xx: Support booting from SD Card with SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 3/7 v9] powerpc: p1022ds: Enable P1022DS to boot from SD Card with SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 4/7 v9] powerpc : spi flash : Support to start from eSPI with SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 5/7 v9] powerpc : p1022ds : enable p1022ds to start from eSPI with SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 6/7 v9] NAND: TPL : introduce the TPL based on the SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 7/7 v9] powerpc: p1022ds: add TPL for p1022ds nand boot   ying.zhang at freescale.com
• [U-Boot] [PATCHv2 3/8] spi: add TI QSPI driver   Wolfgang Denk
• [U-Boot] [PATCHv2 6/8] drivers: mtd: qspi: Add quad read support   Wolfgang Denk
• [U-Boot] [PATCHv2 7/8] driver: spi: Add memory mapped read support   Wolfgang Denk
• [U-Boot] [PATCHv2 3/8] spi: add TI QSPI driver   Sourav Poddar
• [U-Boot] [PATCHv2 7/8] driver: spi: Add memory mapped read support   Sourav Poddar
• [U-Boot] [PATCH] fs: fat: fix bug when write size is less than a sector size   Josh Wu
• [U-Boot] [PATCH 2/7 v9] powerpc: mpc85xx: Support booting from SD Card with SPL   Wolfgang Denk
• [U-Boot] [PATCH 4/7 v9] powerpc : spi flash : Support to start from eSPI with SPL   Wolfgang Denk
• [U-Boot] [PATCH 3/7 v9] powerpc: p1022ds: Enable P1022DS to boot from SD Card with SPL   Wolfgang Denk
• [U-Boot] [PATCH 6/7 v9] NAND: TPL : introduce the TPL based on the SPL   Wolfgang Denk
• [U-Boot] [PATCH 7/7 v9] powerpc: p1022ds: add TPL for p1022ds nand boot   Wolfgang Denk
• [U-Boot] [ANN] U-Boot v2013.07 released   Wolfgang Denk
• [U-Boot] [PATCH v4] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Heiko Schocher
• [U-Boot] [PATCH] net, phy, cpsw: fix gigabit register access   Heiko Schocher
• [U-Boot] Fwd: [i2c] Pull request   Heiko Schocher
• [U-Boot] [PATCHv2 5/8] drivers: mtd: spi: Modify read/write command for sfl256s flash.   Sourav Poddar
• [U-Boot] [PATCHv2 5/8] drivers: mtd: spi: Modify read/write command for sfl256s flash.   Felipe Balbi
• [U-Boot] [PATCHv2 5/8] drivers: mtd: spi: Modify read/write command for sfl256s flash.   Sourav Poddar
• [U-Boot] [ANN] U-Boot v2013.07 released   Albert ARIBAUD
• [U-Boot] [Ac100] [PATCH 3/3] ARM: tegra: paz00: enable nveckeyboardsupport   Stephen Warren
• [U-Boot] [PATCH 0/5] Introducing SPDX-License-Identifiers   Wolfgang Denk
• [U-Boot] [PATCH 2/6] drivers/power/pmic: Add tps65217 driver   Dan Murphy
• [U-Boot] [PATCH 6/6] am335x_evm: am33xx_spl_board_init function and scale core frequency   Dan Murphy
• [U-Boot] [PATCH] am335x:Handle worst case scenario for Errata 1.0.24   Dan Murphy
• [U-Boot] [PATCH] usb: ehci-omap: Don't softreset USB High-speed Host (UHH) Module   Dan Murphy
• [U-Boot] [RFC] [PATCH 0/5] Refactor MAINTAINERS file   Albert ARIBAUD
• [U-Boot] [RFC] [PATCH 1/5] MAINTAINERS: move ARM entries into ARM section   Albert ARIBAUD
• [U-Boot] [RFC] [PATCH 2/5] MAINTAINERS: move improperly placed e-mail addresses   Albert ARIBAUD
• [U-Boot] [RFC] [PATCH 3/5] MAINTAINERS: remove misplaced comments.   Albert ARIBAUD
• [U-Boot] [RFC] [PATCH 4/5] MAINTAINERS: remove useless 'header' lines   Albert ARIBAUD
• [U-Boot] [RFC] [PATCH 5/5] MAINTAINERS: refactor file for easier processing   Albert ARIBAUD
• [U-Boot] [RFC] [PATCH 5/5] MAINTAINERS: refactor file for easier processing   Otavio Salvador
• [U-Boot] [PATCH] imx: nitrogen6x: mx6qsabrelite: Add support for DVI monitors   Eric Nelson
• [U-Boot] sandbox build on OS X   Rommel Custodio
• [U-Boot] [PATCH] imx: nitrogen6x: mx6qsabrelite: Add support for DVI monitors   Fabio Estevam
• [U-Boot] [PATCH v2] imx: nitrogen6x: mx6qsabrelite: Add support for DVI monitors   Robert Winkler
• [U-Boot] [PATCH] imx: nitrogen6x: mx6qsabrelite: Add support for DVI monitors   Eric Nelson
• [U-Boot] [PATCH] net, phy, cpsw: fix gigabit register access   Joe Hershberger
• [U-Boot] [PATCH 1/1] net: phy/realtek: Add support for RTL8211DN and RTL8211E phy modules   Joe Hershberger
• [U-Boot] [PATCH v2] imx: nitrogen6x: mx6qsabrelite: Add support for DVI monitors   Otavio Salvador
• [U-Boot] [GIT PULL] u-boot-mips/master   Daniel Schwierzeck
• [U-Boot] [PATCH v4] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Scott Wood
• [U-Boot] [PATCH v2] imx: nitrogen6x: mx6qsabrelite: Add support for DVI monitors   Robert Winkler
• [U-Boot] [PATCH v2] imx: nitrogen6x: mx6qsabrelite: Add support for DVI monitors   Fabio Estevam
• [U-Boot] [PATCH v4] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Scott Wood
• [U-Boot] [PATCH 6/7 v9] NAND: TPL : introduce the TPL based on the SPL   Scott Wood
• [U-Boot] [PATCH V2 0/9] rely on latest dtc, simplify   Stephen Warren
• [U-Boot] [PATCH] wandboard: Use splash image at screen center by default   Fabio Estevam
• [U-Boot] [PATCH] usb: ehci-omap: Don't softreset USB High-speed Host (UHH) Module   Marek Vasut
• [U-Boot] [PATCH] dfu: Implementation of target reset after communication with dfu-util's -R switch   Marek Vasut
• [U-Boot] [PATCH] net, phy, cpsw: fix gigabit register access   Heiko Schocher
• [U-Boot] Pull request: u-boot-nds32   Macpaul Lin
• [U-Boot] [PATCH v4] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Heiko Schocher
• [U-Boot] [RFC] [PATCH 0/5] Refactor MAINTAINERS file   Wolfgang Denk
• [U-Boot] [PATCH 1/6] nds32: introduce macros for bit manipulation   Macpaul Lin
• [U-Boot] [PATCH 3/6] block: constify sect_buf argument of ide_write_data   Macpaul Lin
• [U-Boot] [PATCH 4/6] pci: add prototype for pci_ftpci_init() function   Macpaul Lin
• [U-Boot] [PATCH 5/6] pci: move pci_ftpci100.h to include/faraday/ftpci100.h   Macpaul Lin
• [U-Boot] [PATCH 6/6] nds32: adp-ag102: use 'faraday/ftpci100.h' for pci_ftpci_init   Macpaul Lin
• [U-Boot] [PATCH] nds32: ag101/ag102: Fix setting lastdec and now values   Macpaul Lin
• [U-Boot] [PATCH 1/4] nds32: Enable two banks of SDRAM on Andes board   Macpaul Lin
• [U-Boot] [PATCH 2/4] nds32: Add bitwise operation macros for drivers   Macpaul Lin
• [U-Boot] [PATCH 3/4] nds32: Enable SDIO and EXT2 command support for Andes board   Macpaul Lin
• [U-Boot] [PATCH 4/4] nds32: Enable the function of passing parameters to Linux   Macpaul Lin
• [U-Boot] [PATCH 2/4] nds32: Add bitwise operation macros for drivers   Macpaul Lin
• [U-Boot] [PATCH] nds32: Enable FPU if the version of CPU supported   Macpaul Lin
• [U-Boot] [RFC] [PATCH 5/5] MAINTAINERS: refactor file for easier processing   Albert ARIBAUD
• [U-Boot] [PATCH 1/5 v2] Licenses: introduce SPDX Unique Lincense Identifiers   Wolfgang Denk
• [U-Boot] [PATCH 1/2] DTS: Addition of GPIO chipselect for MAX98095   Dani Krishna Mohan
• [U-Boot] [PATCH 2/2] Sound: MAX98095: Support I2S0 channel   Dani Krishna Mohan
• [U-Boot] [PATCH] net, phy, cpsw: fix gigabit register access   Mugunthan V N
• [U-Boot] [PATCH 1/5 v3] Licenses: introduce SPDX Unique License Identifiers   Wolfgang Denk
• [U-Boot] [PATCH 0/5] Introducing SPDX-License-Identifiers   Graeme Russ
• [U-Boot] [PATCH] fs: fat: don't call disk_write with zero sector num   Josh Wu
• [U-Boot] i.MX28 AUTO_RESTART, watchdog, battery and poweroff   Hector Palacios
• [U-Boot] [PATCH] mxc_gpio: Correct the GPIO handling in gpio_direction_output()   Stefano Babic
• [U-Boot] [PATCH v2] imx: nitrogen6x: mx6qsabrelite: Add support for DVI monitors   Stefano Babic
• [U-Boot] i.MX28 AUTO_RESTART, watchdog, battery and poweroff   Marek Vasut
• [U-Boot] i.MX28 AUTO_RESTART, watchdog, battery and poweroff   Fabio Estevam
• [U-Boot] [PATCH] wandboard: Use splash image at screen center by default   Stefano Babic
• [U-Boot] [PATCH V2 0/9] rely on latest dtc, simplify   Tom Rini
• [U-Boot] [PATCH v2] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x   Stefano Babic
• [U-Boot] [PATCH v2] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x   Fabio Estevam
• [U-Boot] [PATCH] cmd_io.c: Re-add Copyright/license section   Tom Rini
• [U-Boot] [PATCH] Licenses: Re-add introduction to README, add Exceptions file   Tom Rini
• [U-Boot] [PATCH 0/5] Introducing SPDX-License-Identifiers   Tom Rini
• [U-Boot] [PATCH] drivers/i2c: Update fti2c010.[ch], i2c_core.c to use SPDX identifiers   Tom Rini
• [U-Boot] [PATCH] qemu-malta: Update for SPDX license identifiers   Tom Rini
• [U-Boot] [PATCH] Licenses: Re-add introduction to README, add Exceptions file   Wolfgang Denk
• [U-Boot] [PATCH] nds32: Update <asm/io.h> and <asm/setup.h> with SPDX license identifiers   Tom Rini
• [U-Boot] [RFC PATCH 0/2] ARMV7: OMAP4: Add support for twl6032   Oleg Kosheliev
• [U-Boot] [RFC PATCH 1/2] ARMV7: OMAP4: Add struct for twl603x data   Oleg Kosheliev
• [U-Boot] [RFC PATCH 2/2] ARMV7: OMAP4: Add twl6032 support   Oleg Kosheliev
• [U-Boot] [PATCH] ARM: mxs: rename function that sets AUTO_RESTART flag   Hector Palacios
• [U-Boot] [RFC PATCH] armv7:omap4-common: Correct check of the SPL image size   Oleg Kosheliev
• [U-Boot] [PATCH] Licenses: Re-add introduction to README, add Exceptions file   Tom Rini
• [U-Boot] [PATCH] ARM: mxs: rename function that sets AUTO_RESTART flag   Marek Vasut
• [U-Boot] [PATCH] ARM: mxs: rename function that sets AUTO_RESTART flag   Hector Palacios
• [U-Boot] [PATCH v2 1/2] Subject: [PATCH 1/2] mx6: Factor out common HDMI setup code Instead of duplicating HDMI setup code for every mx6 board, factor out the common code   Pardeep Kumar Singla
• [U-Boot] [PATCH v2 2/2] Subject: [PATCH 2/2] mx6qsabresd: Add splash screen support via HDMI   Pardeep Kumar Singla
• [U-Boot] [PATCH v2 1/2] mx6: Factor out common HDMI setup code Instead of duplicating HDMI setup code for every mx6 board, factor out the common code   Pardeep Kumar Singla
• [U-Boot] [PATCH v2 2/2] mx6qsabresd: Add splash screen support via HDMI   Pardeep Kumar Singla
• [U-Boot] [PATCH v2 1/2] mx6: Factor out common HDMI setup code   Pardeep Kumar Singla
• [U-Boot] [PATCH v2 2/2] mx6qsabresd: Add splash screen support via HDMI   Pardeep Kumar Singla
• [U-Boot] [PATCH v2 1/2] mx6: Factor out common HDMI setup code   Eric Nelson
• [U-Boot] [PATCH V2 REPOST 0/9] rely on latest dtc, simplify   Stephen Warren
• [U-Boot] [PATCH V2 REPOST 1/9] Validate dtc is new enough   Stephen Warren
• [U-Boot] [PATCH V2 REPOST 2/9] xilinx: move microblaze-generic .dts to standard location   Stephen Warren
• [U-Boot] [PATCH V2 REPOST 3/9] dts/Makefile: simplify dtc invocation   Stephen Warren
• [U-Boot] [PATCH V2 REPOST 4/9] dts/Makefile: unify cpp/dtc include paths   Stephen Warren
• [U-Boot] [PATCH V2 REPOST 5/9] dt: don't use ARCH_CPU_DTS   Stephen Warren
• [U-Boot] [PATCH V2 REPOST 6/9] dts/Makefile: don't define ARCH_CPU_DTS, BOARD_DTS   Stephen Warren
• [U-Boot] [PATCH V2 REPOST 7/9] config: don't define CONFIG_ARCH_DEVICE_TREE   Stephen Warren
• [U-Boot] [PATCH V2 REPOST 8/9] dts/Makefile: don't use cpp -P   Stephen Warren
• [U-Boot] [PATCH V2 REPOST 9/9] dts/Makefile: pass -undef -D__DTS__ to cpp   Stephen Warren
• [U-Boot] [Ac100] [PATCH 3/3] ARM: tegra: paz00: enable nveckeyboardsupport   Marc Dietrich
• [U-Boot] [PATCH v2] nds32: Enable FPU if the version of CPU supported   Kuan-Yu Kuo
• [U-Boot] [PATCH] nds32: Convert Makefiles to use COBJS-y style   Kuan-Yu Kuo
• [U-Boot] [PATCH v4] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Scott Wood
• [U-Boot] [PATCH 1/2] omap: overo: update support for Micron 1GB POP   ash at gumstix.com
• [U-Boot] [PATCH 2/2] omap: overo: Use 200MHz SDRC timings for revision 1, 2 & 3 boards   ash at gumstix.com
• [U-Boot] Building u-boot enabling all debug messages   kannaiah
• [U-Boot] [PATCH v3 6/7] USB: usb-hub: Add a weak function for resetting devices   Dan Murphy
• [U-Boot] [PATCH v2] imx: nitrogen6x: mx6qsabrelite: Add support for DVI monitors   Robert Winkler
• [U-Boot] [PATCH v2] imx: nitrogen6x: mx6qsabrelite: Add support for DVI monitors   Otavio Salvador
• [U-Boot] [PATCH v3 1/2] mx6: Factor out common HDMI setup code   Pardeep Kumar Singla
• [U-Boot] [PATCH v3 2/2] mx6qsabresd: Add splash screen support via HDMI   Pardeep Kumar Singla
• [U-Boot] [PATCH v3 1/2] mx6: Factor out common HDMI setup code   Pardeep Kumar Singla
• [U-Boot] [PATCH v3 2/2] mx6qsabresd: Add splash screen support via HDMI   Pardeep Kumar Singla
• [U-Boot] PPC4XX Custom Board - Failing to read I2C   txcotrader
• [U-Boot] [PATCH] imx: Add documentation for imx specific commands   Robert Winkler
• [U-Boot] How to create a library with already built library   Julyberry
• [U-Boot] [PATCH] imx: Add documentation for imx specific commands   Robert Winkler
• [U-Boot] [PATCH 1/2] arm: smdkc100: remove config.mk file   Minkyu Kang
• [U-Boot] [PATCH 2/2] arm: goni: remove config.mk file   Minkyu Kang
• [U-Boot] [PATCH] imx: Add documentation for imx specific commands   Otavio Salvador
• [U-Boot] PPC4XX Custom Board - Failing to read I2C   Stefan Roese
• [U-Boot] [PATCH v4] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Heiko Schocher
• [U-Boot] [PATCH v5] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Heiko Schocher
• [U-Boot] [PATCH] drivers/i2c: Update fti2c010.[ch], i2c_core.c to use SPDX identifiers   Heiko Schocher
• [U-Boot] [U-boot] shell script syntax   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH v3 6/7] USB: usb-hub: Add a weak function for resetting devices   Marek Vasut
• [U-Boot] [PATCH v5 7/7] cros: exynos: enable cros-ec for smdk5250   Chander Kashyap
• [U-Boot] [PATCH] CONFIG: EXYNOS5: Replace misnomer SMDK5250 with EXYNOS5250 and update Makefiles   Inderpal Singh
• [U-Boot] [PATCH] fs: fat: don't call disk_write with zero sector num   Josh Wu
• [U-Boot] [PATCH 0/5] ARM: IGEP0033: Updates for next release.   Enric Balletbo i Serra
• [U-Boot] [PATCH 1/5] ARM: IGEP0033: Remove undef of CONFIG_CMD_MEMTEST   Enric Balletbo i Serra
• [U-Boot] [PATCH 2/5] ARM: IGEP0033: Add support for Flattened Device Tree.   Enric Balletbo i Serra
• [U-Boot] [PATCH 3/5] ARM: IGEP0033: Remove CYGNUS name from header.   Enric Balletbo i Serra
• [U-Boot] [PATCH 4/5] ARM: IGEP0033: Add support to boot from NAND.   Enric Balletbo i Serra
• [U-Boot] [PATCH 5/5] ARM: IGEP0033: Remove duplicate / unused #defines.   Enric Balletbo i Serra
• [U-Boot] [PATCH 1/7 v10] powerpc: deleted unused symbol CONFIG_SPL_NAND_MINIMAL and enabled some functionality for common SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 2/7 v10] powerpc: mpc85xx: Support booting from SD Card with SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 3/7 v10] powerpc: p1022ds: Enable P1022DS to boot from SD Card with SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 4/7 v10] powerpc : spi flash : Support to start from eSPI with SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 5/7 v10] powerpc : p1022ds : enable p1022ds to start from eSPI with SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 6/7 v10] NAND: TPL : introduce the TPL based on the SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 7/7 v10] powerpc: p1022ds: add TPL for p1022ds nand boot   ying.zhang at freescale.com
• [U-Boot] Pull request: u-boot-nds32   Macpaul Lin
• [U-Boot] [PATCH v2 01/10] ARM: move interrupt_init to before relocation   Albert ARIBAUD
• [U-Boot] [PATCHv2] socfpga: Move board/socfpga_cyclone5 to board/socfpga   Albert ARIBAUD
• [U-Boot] [PATCH v6 00/12] arm: add Faraday A36x SoC platform support   Albert ARIBAUD
• [U-Boot] Pull request v2: u-boot-nds32   Macpaul Lin
• [U-Boot] [PATCH v3 6/7] USB: usb-hub: Add a weak function for resetting devices   Roger Quadros
• [U-Boot] [PATCH] nds32: Update <asm/io.h> and <asm/setup.h> with SPDX license identifiers   Macpaul Lin
• [U-Boot] [PATCH] nds32: Convert Makefiles to use COBJS-y style   Macpaul Lin
• [U-Boot] [PATCH v2] nds32: Enable FPU if the version of CPU supported   Macpaul Lin
• [U-Boot] [RFC] [PATCH 0/5] Refactor MAINTAINERS file   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] arm: goni: remove config.mk file   Lukasz Majewski
• [U-Boot] dfu: bConfigurationValue=2 makes download from windows fail   Egli, Samuel
• [U-Boot] [PATCH v4 0/2] Add Arndale board support   Chander Kashyap
• [U-Boot] [PATCH v4 1/2] exynos5250: Add arndale board support   Chander Kashyap
• [U-Boot] [PATCH v4 2/2] exynos5250: arndale: Add mmc support   Chander Kashyap
• [U-Boot] [PATCH v2] CONFIG: EXYNOS5: Replace misnomer SMDK5250 with EXYNOS5250 and update Makefiles   Inderpal Singh
• [U-Boot] [PATCH 0/5] Introducing SPDX-License-Identifiers   Tom Rini
• [U-Boot] [PATCH] drivers/i2c: Update fti2c010.[ch], i2c_core.c to use SPDX identifiers   Tom Rini
• [U-Boot] Fwd: [i2c] Pull request   Tom Rini
• [U-Boot] Pull request v2: u-boot-nds32   Tom Rini
• [U-Boot] [GIT PULL] u-boot-mips/master   Tom Rini
• [U-Boot] [PATCH] qemu-malta: Update for SPDX license identifiers   Tom Rini
• [U-Boot] [PATCH 0/5] Introducing SPDX-License-Identifiers   Wolfgang Denk
• [U-Boot] How to integrate libtomcrypt into u-boot?   André Schaller
• [U-Boot] dfu: bConfigurationValue=2 makes download from windows fail   Lukasz Majewski
• [U-Boot] [PATCH 1/2] fpga: zynqpl: Add support for zc7100 device.   Michal Simek
• [U-Boot] [PATCH 2/2] fpga: zynqpl: Clear loopback mode during device init   Michal Simek
• [U-Boot] [PATCH] arm: lds: Remove libgcc eabi exception handling tables   Michal Simek
• [U-Boot] [PATCH 1/3] zynq: Add new ddrc driver for ECC support   Michal Simek
• [U-Boot] [PATCH 2/3] zynq: slcr: Wait 100ms till clk is properly setup   Michal Simek
• [U-Boot] [PATCH 3/3] zynq: Enable axi ethernet and emaclite driver initialization   Michal Simek
• [U-Boot] [PATCH 2/6] drivers/power/pmic: Add tps65217 driver   Tom Rini
• [U-Boot] dfu: bConfigurationValue=2 makes download from windows fail   Egli, Samuel
• [U-Boot] [PATCH 1/7 v10] powerpc: deleted unused symbol CONFIG_SPL_NAND_MINIMAL and enabled some functionality for common SPL   Scott Wood
• [U-Boot] [PATCH v6 04/12] cfi_flash: use buffer length in unmap_physmem()   Stefan Roese
• [U-Boot] [PATCH] cfi_flash: Add prototypes of overridable functions   Stefan Roese
• [U-Boot] Please pull u-boot-cfi-flash   Stefan Roese
• [U-Boot] dfu: bConfigurationValue=2 makes download from windows fail   Lukasz Majewski
• [U-Boot] Extract data file from U-Boot image   Guilherme Maciel Ferreira
• [U-Boot] [PATCH v3 1/2] mx6: Factor out common HDMI setup code   Eric Nelson
• [U-Boot] [PATCH v4 1/2] mx6: Factor out common HDMI setup code   Pardeep Kumar Singla
• [U-Boot] [PATCH v4 2/2] mx6qsabresd: Add splash screen support via HDMI   Pardeep Kumar Singla
• [U-Boot] [PATCH 2/6] drivers/power/pmic: Add tps65217 driver   Dan Murphy
• [U-Boot] [PATCH v4 1/2] mx6: Factor out common HDMI setup code   Eric Nelson
• [U-Boot] [Ac100] [PATCH 3/3] ARM: tegra: paz00: enable nveckeyboardsupport   Stephen Warren
• [U-Boot] [PATCH 3/6] drivers/power/pmic: Add tps65910 driver   Dan Murphy
• [U-Boot] [PATCH 2/6] drivers/power/pmic: Add tps65217 driver   Tom Rini
• [U-Boot] [RFC] Remove static display data   Robert Winkler
• [U-Boot] Extract data file from U-Boot image   Albert ARIBAUD
• [U-Boot] Extract data file from U-Boot image   Wolfgang Denk
• [U-Boot] [IMPORTANT NOTE] License handling   Wolfgang Denk
• [U-Boot] Extract data file from U-Boot image   Wolfgang Denk
• [U-Boot] [U-Boot, v3, 6/7] USB: usb-hub: Add a weak function for resetting devices   Lubomir Popov
• [U-Boot] Extract data file from U-Boot image   Guilherme Maciel Ferreira
• [U-Boot] [PATCH] wandboard: add pxe support, set default boot command like highbank   dgilmore at fedoraproject.org
• [U-Boot] [PATCH v2] arm:samsung:serial Extract common UART code   Lukasz Majewski
• [U-Boot] [PATCH v2] arm:samsung: Move common code from ./s5p-common to ./samsung-common/   Lukasz Majewski
• [U-Boot] [PATCH] arm:samsung:cpu_info: Rename s5p_* to samsung_*   Lukasz Majewski
• [U-Boot] [U-Boot, v3, 6/7] USB: usb-hub: Add a weak function for resetting devices   Dan Murphy
• [U-Boot] [PATCH] video: mxc_ipuv3: fix memory alignment of framebuffer   Eric Nelson
• [U-Boot] [PATCH 2/2] arm: goni: remove config.mk file   Minkyu Kang
• [U-Boot] [PATCH] video: mxc_ipuv3: fix memory alignment of framebuffer   Marek Vasut
• [U-Boot] [U-Boot, v3, 6/7] USB: usb-hub: Add a weak function for resetting devices   Marek Vasut
• [U-Boot] Extract data file from U-Boot image   Wolfgang Denk
• [U-Boot] [PATCH v5 0/6] Update gdsys ppc4xx-based boards   Stefan Roese
• [U-Boot] [PATCH 1/3] zynq: Add new ddrc driver for ECC support   Michal Simek
• [U-Boot] Please pull u-boot-ppc4xx   Stefan Roese
• [U-Boot] [PATCH v2 1/3] zynq: Add new ddrc driver for ECC support   Michal Simek
• [U-Boot] [PATCH v2 2/3] zynq: slcr: Wait 100ms till clk is properly setup   Michal Simek
• [U-Boot] [PATCH v2 3/3] zynq: Enable axi ethernet and emaclite driver initialization   Michal Simek
• [U-Boot] [IMPORTANT NOTE] License handling   Albert ARIBAUD
• [U-Boot] [PATCH] uboot optimize memmove   Andy Green
• [U-Boot] [PATCH 2/2] arm: goni: remove config.mk file   Lukasz Majewski
• [U-Boot] [U-Boot, v3, 6/7] USB: usb-hub: Add a weak function for resetting devices   Lubomir Popov
• [U-Boot] [RFC] Remove static display data   Anatolij Gustschin
• [U-Boot] [RFC] Remove static display data   Stefano Babic
• [U-Boot] [PATCH] ARM: mxs: rename function that sets AUTO_RESTART flag   Stefano Babic
• [U-Boot] [PATCH] ARM: mxs: rename function that sets AUTO_RESTART flag   Marek Vasut
• [U-Boot] [PATCH 1/2] fsl_i2c: generate nine pulses on SCL if the I2C bus is hung   Chunhe Lan
• [U-Boot] [PATCH 2/2] fsl_i2c: add workaround for the erratum I2C A004447   Chunhe Lan
• [U-Boot] [PATCH v1 0/8] Support for the kmp204x reference design   Valentin Longchamp
• [U-Boot] [PATCH v1 1/8] km-powerpc: move SYS_MALLOC_LEN out of keymile-common.h   Valentin Longchamp
• [U-Boot] [PATCH v1 2/8] km-powerpc: move CONFIG_FLASH_CFI_MTD to km83xx-common.h   Valentin Longchamp
• [U-Boot] [PATCH v1 3/8] KM: fix typo in default environment   Valentin Longchamp
• [U-Boot] [PATCH v1 4/8] mpc8xxx: set x2 DDR3 refresh rate if SPD config requires it   Valentin Longchamp
• [U-Boot] [PATCH v1 5/8] fsl: do not define FSL_SRIO_PCIE_BOOT_MASTER for all P2041 systems   Valentin Longchamp
• [U-Boot] [PATCH v1 6/8] net/fman: add a fm_enable_port function   Valentin Longchamp
• [U-Boot] [PATCH v1 7/8] mtd/fsl_elbc: take NAND_ECC_SOFT_BCH config option into accout   Valentin Longchamp
• [U-Boot] [PATCH v1 8/8] mpc85xx: introduce the kmp204x reference design support   Valentin Longchamp
• [U-Boot] [PATCH] mmc/dw_mmc: Fix DMA descriptor corruption   Mischa Jonker
• [U-Boot] [PATCH 3/6] drivers/power/pmic: Add tps65910 driver   Tom Rini
• [U-Boot] [PATCH v2 2/3] zynq: slcr: Wait 100ms till clk is properly setup   Jagan Teki
• [U-Boot] [PATCH v2 3/3] zynq: Enable axi ethernet and emaclite driver initialization   Jagan Teki
• [U-Boot] [PATCH] uboot optimize memmove   Wolfgang Denk
• [U-Boot] [PATCH v2 6/6] am335x_evm: Add am335x_boneblack variant   Tom Rini
• [U-Boot] [PATCH v6 0/3] Add TI816X EVM support   TENART Antoine
• [U-Boot] [PATCH] uboot optimize memmove   Andy Green
• [U-Boot] [PATCH] wandboard: add pxe support, set default boot command like highbank   Otavio Salvador
• [U-Boot] [RFC] Remove static display data   Eric Nelson
• [U-Boot] [RFC] Remove static display data   Eric Nelson
• [U-Boot] [PATCH v6 00/12] arm: add Faraday A36x SoC platform support   Kuo-Jung Su
• [U-Boot] [PATCH 1/2] mmc/dw_mmc: Allocate the correct amount of descriptors   Mischa Jonker
• [U-Boot] [PATCH 2/2] Add parentheses to ALLOC_ALIGN_BUFFER macro's   Mischa Jonker
• [U-Boot] [PATCH] video: mxc_ipuv3: fix memory alignment of framebuffer   Eric Nelson
• [U-Boot] [PATCH] [PATCH v3] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x   Fabio Estevam
• [U-Boot] [RFC] Remove static display data   Stefano Babic
• [U-Boot] [PATCH] [PATCH v3] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x   Stefano Babic
• [U-Boot] [RFC] Remove static display data   Stephen Warren
• [U-Boot] [PATCH] [PATCH v3] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x   Eric Nelson
• [U-Boot] [PATCH 2/2] fsl_i2c: add workaround for the erratum I2C A004447   Scott Wood
• [U-Boot] [PATCH 1/2] usb: ehci-mx5: Remove unneeded write to cscmr1 register   Fabio Estevam
• [U-Boot] [PATCH 2/2] usb: ehci-mx5: Use 'bool' instead of 'unsigned char'   Fabio Estevam
• [U-Boot] [PATCH] uboot optimize memmove   Wolfgang Denk
• [U-Boot] [PATCH 2/2] usb: ehci-mx5: Use 'bool' instead of 'unsigned char'   Otavio Salvador
• [U-Boot] Extract data file from U-Boot image   Guilherme Maciel Ferreira
• [U-Boot] [PATCH] powerpc/ppc4xx: Convert new gdsys files to SPDX license tags   Tom Rini
• [U-Boot] [PATCH] video: mxc_ipuv3: fix memory alignment of framebuffer   Marek Vasut
• [U-Boot] [RFC] Remove static display data   Eric Nelson
• [U-Boot] [PATCH] ARM: tegra: support raw ramdisks   Stephen Warren
• [U-Boot] dual licensed files   Roger Meier
• [U-Boot] [RFC V2 0/9] Refactor MAINTAINERS file   Albert ARIBAUD
• [U-Boot] [RFC V2 1/9] MAINTAINERS: move ARM entries into ARM section   Albert ARIBAUD
• [U-Boot] [RFC V2 2/9] MAINTAINERS: move improperly placed e-mail addresses   Albert ARIBAUD
• [U-Boot] [RFC V2 3/9] MAINTAINERS: remove misplaced comments.   Albert ARIBAUD
• [U-Boot] [RFC V2 4/9] MAINTAINERS: remove useless 'header' lines   Albert ARIBAUD
• [U-Boot] [RFC V2 5/9] MAINTAINERS: refactor file for easier processing   Albert ARIBAUD
• [U-Boot] [RFC V2 6/9] tools: add reformat.py and (temporary merge.py)   Albert ARIBAUD
• [U-Boot] [RFC V2 7/9] reformat MAINTAINERS and boards.cfg   Albert ARIBAUD
• [U-Boot] [RFC V2 8/9] boards.cfg: merge MAINTAINERS and reformat   Albert ARIBAUD
• [U-Boot] [RFC V2 9/9] Changes due to boards.cfg reformat   Albert ARIBAUD
• [U-Boot] dual licensed files   Wolfgang Denk
• [U-Boot] [PATCH v5] dfu, nand, ubi: add partubi alt settings for updating ubi partition   Scott Wood
• [U-Boot] [PATCH] libfdt: SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause   Roger Meier
• [U-Boot] [PATCH] powerpc/ppc4xx: Convert new gdsys files to SPDX license tags   Tom Rini
• [U-Boot] Please pull u-boot-cfi-flash   Tom Rini
• [U-Boot] Please pull u-boot-cfi-flash   Tom Rini
• [U-Boot] Please pull u-boot-ppc4xx   Tom Rini
• [U-Boot] [RFC] Remove static display data   Eric Nelson
• [U-Boot] [PATCH v2] mxc_ipuv3: fix memory alignment of framebuffer   Eric Nelson
• [U-Boot] [PATCH] video: mxc_ipuv3: fix memory alignment of framebuffer   Eric Nelson
• [U-Boot] [RFC] Remove static display data   Troy Kisky
• [U-Boot] [PATCH v4 1/2] mx6: Factor out common HDMI setup code   Stefano Babic
• [U-Boot] [PATCH] imx: Add documentation for imx specific commands   Stefano Babic
• [U-Boot] [PATCH v2] imx: nitrogen6x: mx6qsabrelite: Add support for DVI monitors   Stefano Babic
• [U-Boot] [PATCH v4 1/2] mx6: Factor out common HDMI setup code   Stefano Babic
• [U-Boot] [PATCH v4 2/2] mx6qsabresd: Add splash screen support via HDMI   Stefano Babic
• [U-Boot] [PATCH] [PATCH v3] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x   Stefano Babic
• [U-Boot] [PATCH] libfdt: SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause   Rob Herring
• [U-Boot] [RFC] Remove static display data   Simon Glass
• [U-Boot] [PATCH] libfdt: SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause   Wolfgang Denk
• [U-Boot] [PATCH] libfdt: SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause   Wolfgang Denk
• [U-Boot] common/cmd_nand.c license terms   Wolfgang Denk
• [U-Boot] [PATCH v5 7/7] cros: exynos: enable cros-ec for smdk5250   Simon Glass
• [U-Boot] [PATCH] libfdt: SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause   Roger Meier
• [U-Boot] [PATCH] libfdt: SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause   Wolfgang Denk
• [U-Boot] SPDX-License-Identifier: adding a comment section?   Wolfgang Denk
• [U-Boot] [RFC] Remove static display data   Eric Nelson
• [U-Boot] [RFC] Remove static display data   Simon Glass
• [U-Boot] SPDX-License-Identifier: adding a comment section?   Roger Meier
• [U-Boot] [RFC] Remove static display data   Eric Nelson
• [U-Boot] [PATCH 0/5] SPDX-License-Identifier: coverting more files   Wolfgang Denk
• [U-Boot] [PATCH 1/5] SPDX-License-Identifier: convert GPL-2.0+ / BSD-2-Clause dual-licensed files   Wolfgang Denk
• [U-Boot] [PATCH 2/5] SPDX-License-Identifier: fixing some problematic GPL-2.0 files   Wolfgang Denk
• [U-Boot] [PATCH 3/5] SPDX-License-Identifier: convert PIBS licensed files   Wolfgang Denk
• [U-Boot] [PATCH 4/5] board/esd/cpci750/mv_eth.c: Fix license   Wolfgang Denk
• [U-Boot] [PATCH 5/5] SPDX-License-Identifier: convert BSD-3-Clause files   Wolfgang Denk
• [U-Boot] [PATCH v4 0/4] apf27: add support of armadeus apf27   Philippe Reynes
• [U-Boot] [PATCH v4 1/4] mx27: add missing constant for mx27   Philippe Reynes
• [U-Boot] [PATCH v4 2/4] apf27: add support for the armadeus APF27 board   Philippe Reynes
• [U-Boot] [PATCH v4 3/4] apf27: add FPGA support for the apf27 board   Philippe Reynes
• [U-Boot] [PATCH v4 4/4] Update u-boot-nand.bin to be used with spl   Philippe Reynes
• [U-Boot] [PATCH v4 3/4] apf27: add FPGA support for the apf27 board   Wolfgang Denk
• [U-Boot] [PATCH] uboot optimize memmove   Andy Green
• [U-Boot] [PATCH 0/3] arm, am335x: add support for siemens boards   Heiko Schocher
• [U-Boot] [PATCH 1/3] arm, spl: add watchdog library to SPL   Heiko Schocher
• [U-Boot] [PATCH 2/3 v2] arm, am335x: add watchdog support   Heiko Schocher
• [U-Boot] [PATCH 3/3] arm, am335x: add support for 3 siemens boards   Heiko Schocher
• [U-Boot] [PATCH v7 00/11] arm: add Faraday A36x SoC platform support   Kuo-Jung Su
• [U-Boot] [PATCH v7 01/11] arm: dma_alloc_coherent: malloc() -> memalign()   Kuo-Jung Su
• [U-Boot] [PATCH v7 02/11] video: add Faraday FTLCDC200 LCD controller support   Kuo-Jung Su
• [U-Boot] [PATCH v7 03/11] nand: add Faraday FTNANDC021 NAND controller support   Kuo-Jung Su
• [U-Boot] [PATCH v7 04/11] arm: add MMU/D-Cache support for Faraday cores   Kuo-Jung Su
• [U-Boot] [PATCH v7 05/11] arm: add Faraday processor core support   Kuo-Jung Su
• [U-Boot] [PATCH v7 06/11] arm: add Faraday FTINTC020 interrupt controller support   Kuo-Jung Su
• [U-Boot] [PATCH v7 07/11] arm: add Faraday FTTMR010 timer support   Kuo-Jung Su
• [U-Boot] [PATCH v7 08/11] arm: add Faraday FTPWMTMR010 timer support   Kuo-Jung Su
• [U-Boot] [PATCH v7 09/11] arm: add customized boot command for Faraday Images   Kuo-Jung Su
• [U-Boot] [PATCH v7 10/11] mmc: ftsdc010_mci: clk_get_rate() -> clock_get_rate()   Kuo-Jung Su
• [U-Boot] [PATCH v7 11/11] arm: add Faraday A360/A369 SoC platform support   Kuo-Jung Su
• [U-Boot] Is it permissible to link stubs.o to a standalone application?   BAI Yingjie
• [U-Boot] [PATCH] powerpc/ppc4xx: Convert new gdsys files to SPDX license tags   Stefan Roese
• [U-Boot] [PATCH 1/9] arm926ej-s: Invalidate instruction cache in flush_cache   Albert ARIBAUD
• [U-Boot] [PATCH] OpenRD: relocate environment to 640kB   Albert ARIBAUD
• [U-Boot] [PATCH] uboot optimize memmove   Wolfgang Denk
• [U-Boot] [PATCH v4 1/4] mx27: add missing constant for mx27   Stefano Babic
• [U-Boot] [PATCH] uboot optimize memmove   Dirk Behme
• [U-Boot] [PATCH] uboot optimize memmove   Andy Green
• [U-Boot] [PATCH] gpio: altera_pio: Fix inversed logic of gpio_is_valid() implementation   Albert ARIBAUD
• [U-Boot] [PATCH v4 2/4] apf27: add support for the armadeus APF27 board   Stefano Babic
• [U-Boot] [PATCH v2] mxc_ipuv3: fix memory alignment of framebuffer   Stefano Babic
• [U-Boot] [PATCH 0/2] usb bug fixes   Nikita Kiryanov
• [U-Boot] [PATCH 1/2] usb_hub: fix power cycling logic   Nikita Kiryanov
• [U-Boot] [PATCH 2/2] ehci-hcd: fix memory leak in lowlevel init   Nikita Kiryanov
• [U-Boot] [PATCH] uboot optimize memmove   Will Newton
• [U-Boot] Falcon Mode implemented version   Rajdeep Vaghasia
• [U-Boot] Falcon Mode implemented version   Stefano Babic
• [U-Boot] [PATCH] powerpc/ppc4xx: Convert new gdsys files to SPDX license tags   Tom Rini
• [U-Boot] [PATCH 2/3 v2] arm, am335x: add watchdog support   Tom Rini
• [U-Boot] SPDX-License-Identifier: adding a comment section?   Tom Rini
• [U-Boot] [PATCH 1/9] arm926ej-s: Invalidate instruction cache in flush_cache   Michael Spang
• [U-Boot] [PATCH 2/3 v2] arm, am335x: add watchdog support   Heiko Schocher
• [U-Boot] [PATCH 2/3 v2] arm, am335x: add watchdog support   Tom Rini
• [U-Boot] [PATCH 1/9] arm926ej-s: Invalidate instruction cache in flush_cache   Albert ARIBAUD
• [U-Boot] [PATCH 1/9] arm926ej-s: Invalidate instruction cache in flush_cache   Michael Spang
• [U-Boot] [PATCH 0/5] sf: Add support to access dual flash memory   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 1/5] sf: Add support for accessing dual parallel memories   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 2/5] sf: spansion|stmicro: Enable dual parallel access   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 3/5] sf: Add support for accessing dual stacked memories   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 4/5] sf: spansion|stmicro: Enable dual stacked access   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 5/5] sf: Add bank selection support for dual stacked access   Jagannadha Sutradharudu Teki
• [U-Boot] Query: Ethernet switch support   Sharma Bhupesh-B45370
• [U-Boot] [PATCH 6/6] am335x_evm: am33xx_spl_board_init function and scale core frequency   Enric Balletbo Serra
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Stephen Warren
• [U-Boot] [RFC] Remove static display data   Simon Glass
• [U-Boot] Query: Ethernet switch support   Albert ARIBAUD
• [U-Boot] [PATCH v2 0/6] sf: Code cleanup patch set   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 1/6] sf: eon|spansion|ramtron: Fix code cleanup   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 2/6] sf: sst: Fix code cleanup   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 3/6] sf: stmicro: Fix code cleanup   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 4/6] sf: Fix code cleanup   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 5/6] cmd_sf|env_sf: Fix code cleanup   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 6/6] sf: Fix code cleanups   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 0/4] sf: macronix: Add support for bank addr access   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 1/4] sf: Move manufacture id code macros to CONFIG_SPI_FLASH_BAR   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 2/4] sf: Add bank addr access support macronix flash's   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 3/4] sf: macronix: Add support for MX25L25635F   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 4/4] sf: macronix: Add support for MX25L51235F   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 0/3] spi: Add zynq spi controller   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 1/3] spi: Add zynq spi controller driver   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 2/3] sf: sst: Add support for SST25WF080   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 3/3] zynq: Enable CONFIG_ZYNQ_SPI   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH] wandboard: add pxe support, set default boot command like highbank   Otavio Salvador
• [U-Boot] common/cmd_nand.c license terms   Scott Wood
• [U-Boot] SPDX-License-Identifier: adding a comment section?   Wolfgang Denk
• [U-Boot] common/cmd_nand.c license terms   Wolfgang Denk
• [U-Boot] Query: Ethernet switch support   Wolfgang Denk
• [U-Boot] [PATCH v5 1/1] socfpga: Adding configuration for development kit   Chin Liang See
• [U-Boot] [PATCH v5 1/1] socfpga: Creating driver for Reset Manager   Chin Liang See
• [U-Boot] [PATCH v6 1/2] socfpga: Adding System Manager driver   Chin Liang See
• [U-Boot] [PATCH v5 2/2] socfpga: Adding pin mux handoff files   Chin Liang See
• [U-Boot] [PATCH 0/2] usb bug fixes   Marek Vasut
• [U-Boot] common/cmd_nand.c license terms   Scott Wood
• [U-Boot] [PATCH v3 2/7] ARM: add secure monitor handler to switch to non-secure state   Christoffer Dall
• [U-Boot] [PATCH v3 4/7] ARM: switch to non-secure state during bootm execution   Christoffer Dall
• [U-Boot] [PATCH v3 5/7] ARM: add SMP support for non-secure switch   Christoffer Dall
• [U-Boot] [PATCH v3 6/7] ARM: extend non-secure switch to also go into HYP mode   Christoffer Dall
• [U-Boot] [PATCH v4 4/4] Update u-boot-nand.bin to be used with spl   Scott Wood
• [U-Boot] [PATCH v7 03/11] nand: add Faraday FTNANDC021 NAND controller support   Scott Wood
• [U-Boot] [PATCH v7 03/11] nand: add Faraday FTNANDC021 NAND controller support   Kuo-Jung Su
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH] config.mk: Add -Wundef to CFLAGS   Masahiro Yamada
• [U-Boot] Query: Ethernet switch support   Sharma Bhupesh-B45370
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Heiko Schocher
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Simon Glass
• [U-Boot] [PATCH v2 0/3] arm, am335x: add support for siemens boards   Heiko Schocher
• [U-Boot] [PATCH v2 1/3] arm, spl: add watchdog library to SPL   Heiko Schocher
• [U-Boot] [PATCH v3 2/3] arm, am335x: add watchdog support   Heiko Schocher
• [U-Boot] [PATCH v2 3/3] arm, am335x: add support for 3 siemens boards   Heiko Schocher
• [U-Boot] [PATCH V2 0/4]ARM: AM33xx: Cleanup clocks and hwinit   Lokesh Vutla
• [U-Boot] [PATCH V2 1/4] ARM: AM33xx: Cleanup dplls data   Lokesh Vutla
• [U-Boot] [PATCH V2 2/4] ARM: AM33xx: Cleanup clocks layer   Lokesh Vutla
• [U-Boot] [PATCH V2 3/4] ARM: AM33xx: Move s_init to a common place   Lokesh Vutla
• [U-Boot] [PATCH V2 4/4] musb: Disable extra prints   Lokesh Vutla
• [U-Boot] [PATCH] cfi_flash: Add prototypes of overridable functions   Masahiro Yamada
• [U-Boot] [PATCH v2 3/3] arm, am335x: add support for 3 siemens boards   Lokesh Vutla
• [U-Boot] [PATCH V2 0/6] ARM: AM43xx: Add Support for AM43xx Soc's   Lokesh Vutla
• [U-Boot] [PATCH V2 1/6] ARM: AM43xx: Add Board files   Lokesh Vutla
• [U-Boot] [PATCH V2 2/6] ARM: AM43xx: Add header files   Lokesh Vutla
• [U-Boot] [PATCH V2 3/6] ARM: AM43xx: clocks: Add dpll and clock data   Lokesh Vutla
• [U-Boot] [PATCH V2 4/6] ARM: OMAP: Add CONFIG_OMAP_COMMON   Lokesh Vutla
• [U-Boot] [PATCH V2 5/6] ARM: AM43xx: Add build support   Lokesh Vutla
• [U-Boot] [PATCH V2 6/6] ARM: AM43xx: Add config file   Lokesh Vutla
• [U-Boot] Falcon Mode implemented version   Rajdeep Vaghasia
• [U-Boot] Falcon Mode implemented version   Stefano Babic
• [U-Boot] [PATCH v2 3/3] arm, am335x: add support for 3 siemens boards   Heiko Schocher
• [U-Boot] [PATCH v2 3/3] arm, am335x: add support for 3 siemens boards   Heiko Schocher
• [U-Boot] [PATCH V2 1/4] ARM: AM33xx: Cleanup dplls data   Heiko Schocher
• [U-Boot] [PATCH V2 2/4] ARM: AM33xx: Cleanup clocks layer   Heiko Schocher
• [U-Boot] [PATCH V2 3/4] ARM: AM33xx: Move s_init to a common place   Heiko Schocher
• [U-Boot] [PATCH V2 4/4] musb: Disable extra prints   Heiko Schocher
• [U-Boot] [PATCH v3 0/4] arm, am335x: add support for siemens boards   Heiko Schocher
• [U-Boot] [PATCH v3 1/4] arm, am33xx: add defines for gmii_sel_register bits   Heiko Schocher
• [U-Boot] [PATCH v3 2/4] arm, spl: add watchdog library to SPL   Heiko Schocher
• [U-Boot] [PATCH v3 3/4] arm, am335x: add watchdog support   Heiko Schocher
• [U-Boot] [PATCH v3 4/4] arm, am335x: add support for 3 siemens boards   Heiko Schocher
• [U-Boot] [PATCH 3/5] SPDX-License-Identifier: convert PIBS licensed files   Stefan Roese
• [U-Boot] [PATCH 4/5] board/esd/cpci750/mv_eth.c: Fix license   Stefan Roese
• [U-Boot] [PATCH] cfi_flash: Add prototypes of overridable functions   Stefan Roese
• [U-Boot] Please pull u-boot-cfi-flash   Stefan Roese
• [U-Boot] [PATCH v3 1/4] arm, am33xx: add defines for gmii_sel_register bits   Mugunthan V N
• [U-Boot] Please pull u-boot-ti/master   Stefan Roese
• [U-Boot] [IMPORTANT NOTE] License handling   Masahiro Yamada
• [U-Boot] [PATCH v3 3/3] arm: omap3: Add SPL support to cm_t35   Stefan Roese
• [U-Boot] [IMPORTANT NOTE] License handling   Wolfgang Denk
• [U-Boot] [IMPORTANT NOTE] License handling   Graeme Russ
• [U-Boot] [PATCH v3 4/7] ARM: switch to non-secure state during bootm execution   Andre Przywara
• [U-Boot] [PATCH v3 2/7] ARM: add secure monitor handler to switch to non-secure state   Andre Przywara
• [U-Boot] [PATCH v3 5/7] ARM: add SMP support for non-secure switch   Andre Przywara
• [U-Boot] [PATCH v3 6/7] ARM: extend non-secure switch to also go into HYP mode   Andre Przywara
• [U-Boot] [PATCH] config.mk: Add -Wundef to CFLAGS   Albert ARIBAUD
• [U-Boot] [IMPORTANT NOTE] License handling   Wolfgang Denk
• [U-Boot] [PATCH v3 3/3] arm: omap3: Add SPL support to cm_t35   Albert ARIBAUD
• [U-Boot] RNG implementation fails   André Schaller
• [U-Boot] [PATCH v3 3/3] arm: omap3: Add SPL support to cm_t35   Stefan Roese
• [U-Boot] [PATCH v2 0/6] Enhance support for BeagleBone Black   Tom Rini
• [U-Boot] [U-Boot, 2/3] arm: omap3: spl: Fix problem with 8bit NAND devices   Tom Rini
• [U-Boot] da850evm: Use clrbits function with correct endianess   Tom Rini
• [U-Boot] spl_mmc.c: Detect missing kernel image in RAW MMC   Tom Rini
• [U-Boot] net, phy, cpsw: fix gigabit register access   Tom Rini
• [U-Boot] [PATCH 0/7] Ethernet bringup patchset for DRA7xx EVM   Tom Rini
• [U-Boot] [PATCH v2 0/5] Improve falcon mode and am335x_evm docs   Tom Rini
• [U-Boot] [PATCH 1/1] board/ti/am335x/README: Document NAND programming   Tom Rini
• [U-Boot] [PATCH v4 0/8] am335x: NOR support   Tom Rini
• [U-Boot] omap3/sys_info: fix printout of OMAP36XX L3 freqency   Tom Rini
• [U-Boot] [PATCH v3 1/2] gpio: tca642x: Add the tca642x gpio expander driver   Tom Rini
• [U-Boot] [PATCH V3 0/6] omap3_beagle: configs: improve BOOT_CMD options   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH v3 4/7] ARM: switch to non-secure state during bootm execution   Christoffer Dall
• [U-Boot] Please pull u-boot-cfi-flash   Tom Rini
• [U-Boot] [PATCH v3 5/7] ARM: add SMP support for non-secure switch   Christoffer Dall
• [U-Boot] [PATCH v3 6/7] ARM: extend non-secure switch to also go into HYP mode   Christoffer Dall
• [U-Boot] KVM on ARM Chromebook   Alexander Spyridakis
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Stephen Warren
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Stephen Warren
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Stephen Warren
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] getline prototype issue   York Sun
• [U-Boot] getline prototype issue   Simon Glass
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Simon Glass
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Stephen Warren
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Simon Glass
• [U-Boot] [PATCH 0/5] SPDX-License-Identifier: coverting more files   Roger Meier
• [U-Boot] getline prototype issue   York Sun
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Stephen Warren
• [U-Boot] [PATCH 00/11] ARM: mxs: Various MX23 adjustments   Marek Vasut
• [U-Boot] [PATCH 01/11] dma: apbh: Add special circular mode for LCD   Marek Vasut
• [U-Boot] [PATCH 02/11] video: Allocate the MXSFB framebuffer aligned   Marek Vasut
• [U-Boot] [PATCH 03/11] video: Add System-Mode configuration hook into mxsfb   Marek Vasut
• [U-Boot] [PATCH 04/11] video: Implement continuous screen refresh for SmartLCD into mxsfb   Marek Vasut
• [U-Boot] [PATCH 05/11] ARM: mxs: Add Creative ZEN XFi3 board   Marek Vasut
• [U-Boot] [PATCH 06/11] ARM: mxs: Add SanDisk Sansa Fuze+ board   Marek Vasut
• [U-Boot] [PATCH 07/11] video: Encapsulate font in video_font_data.h   Marek Vasut
• [U-Boot] [PATCH 08/11] video: Add small 4x6 font from Linux   Marek Vasut
• [U-Boot] [PATCH 09/11] video: Fix cfb_console for 4-bit wide font   Marek Vasut
• [U-Boot] [PATCH 10/11] ARM: mxs: Enable 4x6 font for X-Fi3   Marek Vasut
• [U-Boot] [PATCH 11/11] ARM: mxs: Enable 4x6 font for Fuze+   Marek Vasut
• [U-Boot] getline prototype issue   York Sun
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Simon Glass
• [U-Boot] [PATCH 03/11] video: Add System-Mode configuration hook into mxsfb   Otavio Salvador
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Simon Glass
• [U-Boot] getline prototype issue   Simon Glass
• [U-Boot] [PATCH 05/11] ARM: mxs: Add Creative ZEN XFi3 board   Otavio Salvador
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Stephen Warren
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Simon Glass
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Albert ARIBAUD
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Simon Glass
• [U-Boot] [PATCH] tools/Makefile: Move _GNU_SOURCE to Makefile   York Sun
• [U-Boot] [PATCH] tools/Makefile: Move _GNU_SOURCE to Makefile   Simon Glass
• [U-Boot] [PATCH 03/11] video: Add System-Mode configuration hook into mxsfb   Marek Vasut
• [U-Boot] [PATCH 05/11] ARM: mxs: Add Creative ZEN XFi3 board   Marek Vasut
• [U-Boot] [PATCH 03/11] video: Add System-Mode configuration hook into mxsfb   Otavio Salvador
• [U-Boot] [PATCH 05/11] ARM: mxs: Add Creative ZEN XFi3 board   Otavio Salvador
• [U-Boot] [PATCH 03/11] video: Add System-Mode configuration hook into mxsfb   Marek Vasut
• [U-Boot] [PATCH 05/11] ARM: mxs: Add Creative ZEN XFi3 board   Marek Vasut
• [U-Boot] [PATCH] video: add L5F31188 TFT-LCD panel driver   Hyungwon Hwang
• [U-Boot] [PATCH] config.mk: Add -Wundef to CFLAGS   Masahiro Yamada
• [U-Boot] [PATCH] config.mk: Delete unnecessary code   Masahiro Yamada
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Heiko Schocher
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Heiko Schocher
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Heiko Schocher
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Wolfgang Denk
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Heiko Schocher
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Heiko Schocher
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Heiko Schocher
• [U-Boot] [PATCH 05/11] ARM: mxs: Add Creative ZEN XFi3 board   Heiko Schocher
• [U-Boot] [PATCH] video: add L5F31188 TFT-LCD panel driver   Heiko Schocher
• [U-Boot] [PATCH v3 1/4] arm, am33xx: add defines for gmii_sel_register bits   Heiko Schocher
• [U-Boot] [PATCHv2 5/8] drivers: mtd: spi: Modify read/write command for sfl256s flash.   Sourav Poddar
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Albert ARIBAUD
• [U-Boot] [PATCH] config.mk: Add -Wundef to CFLAGS   Albert ARIBAUD
• [U-Boot] KVM on ARM Chromebook   Marc Zyngier
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Heiko Schocher
• [U-Boot] [PATCH] sf: spansion: Add support for S25FL512S_256K   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] spi: Add support SH Queued SPI driver   Nobuhiro Iwamatsu
• [U-Boot] Change of NDS32 Custodian   Macpaul Lin
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Albert ARIBAUD
• [U-Boot] [PATCH] video: add L5F31188 TFT-LCD panel driver   Hyungwon Hwang
• [U-Boot] [PATCH v2] video: add L5F31188 TFT-LCD panel driver   Hyungwon Hwang
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Heiko Schocher
• [U-Boot] Pull request: u-boot-blackfin   Sonic Zhang
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Albert ARIBAUD
• [U-Boot] [PATCH v7 2/2] console: usb: kbd: To improve TFTP booting performance   Jim Lin
• [U-Boot] KVM on ARM Chromebook   Alexander Spyridakis
• [U-Boot] [PATCH v7 2/2] console: usb: kbd: To improve TFTP booting performance   Jim Lin
• [U-Boot] [PATCH] video: add L5F31188 TFT-LCD panel driver   Minkyu Kang
• [U-Boot] [PATCH v7 2/2] console: usb: kbd: To improve TFTP booting performance   Jim Lin
• [U-Boot] [PATCH] sf: spansion: Add support for S25FL512S_256K   Michal Simek
• [U-Boot] [PATCH 05/11] ARM: mxs: Add Creative ZEN XFi3 board   Marek Vasut
• [U-Boot] [PATCH v7 2/2] console: usb: kbd: To improve TFTP booting performance   Marek Vasut
• [U-Boot] Change of NDS32 Custodian   Marek Vasut
• [U-Boot] [PATCH] i2c: soft: Fix typo in CONFIG_SYS_I2C_SOFT_SPEED   Marek Vasut
• [U-Boot] [PATCH] powerpc/mpc85xx:Avoid hardcoded init for serdes block 1 & 2   Prabhakar Kushwaha
• [U-Boot] [PATCH v2] sandbox: block driver using host file/device as backing store   Simon Glass
• [U-Boot] [PATCH 2/5] SPDX-License-Identifier: fixing some problematic GPL-2.0 files   Tom Rini
• [U-Boot] [PATCH] spi: Add support SH Queued SPI driver   Tom Rini
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Simon Glass
• [U-Boot] Change of NDS32 Custodian   Tom Rini
• [U-Boot] [PATCH 05/11] ARM: mxs: Add Creative ZEN XFi3 board   Otavio Salvador
• [U-Boot] [PATCH 0/7] USB: XHCI: Add xHCI host controller stack driver   Dan Murphy
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Heiko Schocher
• [U-Boot] [PATCH 03/11] video: Add System-Mode configuration hook into mxsfb   Stefano Babic
• [U-Boot] [PATCH 03/11] video: Add System-Mode configuration hook into mxsfb   Marek Vasut
• [U-Boot] [PATCH v2 3/3] arm, am335x: add support for 3 siemens boards   Tom Rini
• [U-Boot] fw_printenv (uboot2011.12) 'Warning: Bad CRC, using default environment'   Andy Neubi
• [U-Boot] [PATCH] ARM: mxs: tools: Add mkimage support for MXS bootstream   Marek Vasut
• [U-Boot] [PATCH 0/7] USB: XHCI: Add xHCI host controller stack driver   Vivek Gautam
• [U-Boot] [PATCH 0/7] USB: XHCI: Add xHCI host controller stack driver   Dan Murphy
• [U-Boot] [PATCH 05/11] ARM: mxs: Add Creative ZEN XFi3 board   Stefano Babic
• [U-Boot] [PATCH 10/11] ARM: mxs: Enable 4x6 font for X-Fi3   Stefano Babic
• [U-Boot] [PATCH 03/11] video: Add System-Mode configuration hook into mxsfb   Stefano Babic
• [U-Boot] [PATCH 05/11] ARM: mxs: Add Creative ZEN XFi3 board   Marek Vasut
• [U-Boot] [PATCH 03/11] video: Add System-Mode configuration hook into mxsfb   Marek Vasut
• [U-Boot] [PATCH 10/11] ARM: mxs: Enable 4x6 font for X-Fi3   Marek Vasut
• [U-Boot] [PATCH 1/2] powerpc: Use print_size() where appropriate   Shruti Kanetkar
• [U-Boot] [PATCH 2/2] powerpc: Print hardcoded size like print_size() does   Shruti Kanetkar
• [U-Boot] [PATCH 10/11] ARM: mxs: Enable 4x6 font for X-Fi3   Stefano Babic
• [U-Boot] fw_printenv (uboot2011.12) 'Warning: Bad CRC, using default environment'   Andreas Bießmann
• [U-Boot] [PATCH 05/11] ARM: mxs: Add Creative ZEN XFi3 board   Wolfgang Denk
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Stephen Warren
• [U-Boot] [PATCH 06/11] ARM: mxs: Add SanDisk Sansa Fuze+ board   Wolfgang Denk
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Wolfgang Denk
• [U-Boot] [PATCH 06/11] ARM: mxs: Add SanDisk Sansa Fuze+ board   Marek Vasut
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Stephen Warren
• [U-Boot] [PATCH v3 7/7] ARM: OMAP5-uevm: Add usb device reset API   Dan Murphy
• [U-Boot] [PATCH 05/11] ARM: mxs: Add Creative ZEN XFi3 board   Marek Vasut
• [U-Boot] [PATCH v3 7/7] ARM: OMAP5-uevm: Add usb device reset API   Marek Vasut