[U-Boot] [PATCH] powerpc/85xx: Add workaround for errata USB-14 (enable on P204x/P3041/P50x0)

[xulei]

Hello, Wolfgang

	Thank you and I agree with you. It is a little ugly but because these
registers info are not publicly, so I did not use C struct to describe
them, then for this case it it ok or other method such as define a
struct but keep all other registers and bits in this register reserved?
or any method better? Thank you.

Regards
Lei

On Monday, 2013-03-04 at 10:26 +0100, Wolfgang Denk wrote:
> Dear xulei,
> 
> In message <1362368146-738-1-git-send-email-B33228 at freescale.com> you wrote:
> > On P204x/P304x/P50x0 Rev1.0, USB transmit will result in false internal
> > multi-bit ECC errors, which has impact on performance, so software should
> > disable all ECC reporting from USB1 and USB2 by setting bits 16 and 17 to 1
> > in the register at DCSRBASE + 0x0002_0520.
> ...
> > +		void *p;
> > +		p = (void *)CONFIG_SYS_DCSRBAR + 0x20520;
> 
> Um... and don't we have a proper C struct that describes the registers
> in this area?
> 
> We don't allow base address + offset addressing like this.
> 
> Best regards,
> 
> Wolfgang Denk
>