[U-Boot] [PATCH v1 1/3] blackfin: Enable early print via the generic serial API.

Sonic Zhang sonic.adi at gmail.com
Thu Mar 14 08:29:20 CET 2013


From: Sonic Zhang <sonic.zhang at analog.com>

Remove blackfin specific implementation of the generic serial API when
early print macro is defined.

In BFIN_BOOT_BYPASS mode, don't call generic serial_puts, because
early print in bypass mode is running before code binary is relocated
to the link address.

Signed-off-by: Sonic Zhang <sonic.zhang at analog.com>
---
 arch/blackfin/cpu/serial.c        |   71 ++++++++++++------------------------
 arch/blackfin/cpu/serial.h        |   10 +++---
 include/configs/bfin_adi_common.h |    3 --
 3 files changed, 29 insertions(+), 55 deletions(-)

diff --git a/arch/blackfin/cpu/serial.c b/arch/blackfin/cpu/serial.c
index 36d2a5c..89290d6 100644
--- a/arch/blackfin/cpu/serial.c
+++ b/arch/blackfin/cpu/serial.c
@@ -197,13 +197,16 @@ static void uart_loop(uint32_t uart_base, int state)
 
 static inline void __serial_set_baud(uint32_t uart_base, uint32_t baud)
 {
+#ifdef CONFIG_DEBUG_EARLY_SERIAL
+	serial_early_set_baud(uart_base, baud);
+#else
 	uint16_t divisor = (get_uart_clk() + (baud * 8)) / (baud * 16)
 			- ANOMALY_05000230;
 
 	/* Program the divisor to get the baud rate we want */
 	serial_set_divisor(uart_base, divisor);
+#endif
 }
-#ifdef CONFIG_SYS_BFIN_UART
 
 static void uart_puts(uint32_t uart_base, const char *s)
 {
@@ -313,65 +316,39 @@ void bfin_serial_initialize(void)
 #endif
 }
 
-#else
-
-/* Symbol for our assembly to call. */
-void serial_set_baud(uint32_t baud)
-{
-	serial_early_set_baud(UART_BASE, baud);
-}
-
-/* Symbol for common u-boot code to call.
- * Setup the baudrate (brg: baudrate generator).
- */
-void serial_setbrg(void)
+#ifdef CONFIG_DEBUG_EARLY_SERIAL
+inline void uart_early_putc(uint32_t uart_base, const char c)
 {
-	serial_set_baud(gd->baudrate);
-}
-
-/* Symbol for our assembly to call. */
-void serial_initialize(void)
-{
-	serial_early_init(UART_BASE);
-}
-
-/* Symbol for common u-boot code to call. */
-int serial_init(void)
-{
-	serial_initialize();
-	serial_setbrg();
-	uart_lsr_clear(UART_BASE);
-	return 0;
-}
+	/* send a \r for compatibility */
+	if (c == '\n')
+		uart_early_putc(uart_base, '\r');
 
-int serial_tstc(void)
-{
-	return uart_tstc(UART_BASE);
-}
+	/* wait for the hardware fifo to clear up */
+	while (!(_lsr_read(pUART) & THRE))
+		continue;
 
-int serial_getc(void)
-{
-	return uart_getc(UART_BASE);
+	/* queue the character for transmission */
+	bfin_write(&pUART->thr, c);
+	SSYNC();
 }
 
-void serial_putc(const char c)
+void uart_early_puts(const char *s)
 {
-	uart_putc(UART_BASE, c);
+	while (*s)
+		uart_early_putc(UART_BASE, *s++);
 }
 
-void serial_puts(const char *s)
+/* Symbol for our assembly to call. */
+void _serial_early_set_baud(uint32_t baud)
 {
-	while (*s)
-		serial_putc(*s++);
+	serial_early_set_baud(UART_BASE, baud);
 }
 
-LOOP(
-void serial_loop(int state)
+/* Symbol for our assembly to call. */
+void _serial_early_init(void)
 {
-	uart_loop(UART_BASE, state);
+	serial_early_init(UART_BASE);
 }
-)
-
 #endif
 
 #endif
diff --git a/arch/blackfin/cpu/serial.h b/arch/blackfin/cpu/serial.h
index d67fd81..87a337d 100644
--- a/arch/blackfin/cpu/serial.h
+++ b/arch/blackfin/cpu/serial.h
@@ -78,16 +78,16 @@ static inline void serial_early_puts(const char *s)
 #else
 
 .macro serial_early_init
-#if defined(CONFIG_DEBUG_EARLY_SERIAL) && defined(BFIN_BOOT_BYPASS)
-	call _serial_initialize;
+#if defined(CONFIG_DEBUG_EARLY_SERIAL) && !defined(CONFIG_UART_MEM)
+	call __serial_early_init;
 #endif
 .endm
 
 .macro serial_early_set_baud
-#if defined(CONFIG_DEBUG_EARLY_SERIAL) && defined(BFIN_BOOT_BYPASS)
+#if defined(CONFIG_DEBUG_EARLY_SERIAL) && !defined(CONFIG_UART_MEM)
 	R0.L = LO(CONFIG_BAUDRATE);
 	R0.H = HI(CONFIG_BAUDRATE);
-	call _serial_set_baud;
+	call __serial_early_set_baud;
 #endif
 .endm
 
@@ -121,7 +121,7 @@ static inline void serial_early_puts(const char *s)
 	R0.L = 7b; \
 	R0.H = 7b; \
 	update_serial_early_string_addr \
-	call _serial_puts;
+	call _uart_early_puts;
 #else
 # define serial_early_puts(str)
 #endif
diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h
index d3ae3a7..c986ba3 100644
--- a/include/configs/bfin_adi_common.h
+++ b/include/configs/bfin_adi_common.h
@@ -111,9 +111,6 @@
 #ifndef CONFIG_BAUDRATE
 # define CONFIG_BAUDRATE	57600
 #endif
-#ifndef CONFIG_DEBUG_EARLY_SERIAL
-# define CONFIG_SYS_BFIN_UART
-#endif
 
 /*
  * Debug Settings
-- 
1.7.0.4




More information about the U-Boot mailing list