[U-Boot] [PATCH 05/11] usb-gadget: add FOTG210 USB gadget support
Kuo-Jung Su
dantesu at gmail.com
Fri Mar 29 08:06:22 CET 2013
From: Kuo-Jung Su <dantesu at faraday-tech.com>
This patch would try to use Faraday FOTG210 to implement
a USB RNDIS Ethernet.
Signed-off-by: Kuo-Jung Su <dantesu at faraday-tech.com>
---
drivers/usb/gadget/Makefile | 1 +
drivers/usb/gadget/fotg210.c | 926 +++++++++++++++++++++++++++++++++++++
drivers/usb/gadget/fotg210.h | 99 ++++
drivers/usb/gadget/gadget_chips.h | 8 +
4 files changed, 1034 insertions(+)
create mode 100644 drivers/usb/gadget/fotg210.c
create mode 100644 drivers/usb/gadget/fotg210.h
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index e545b6b..432cf17 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -35,6 +35,7 @@ endif
# new USB gadget layer dependencies
ifdef CONFIG_USB_GADGET
COBJS-$(CONFIG_USB_GADGET_S3C_UDC_OTG) += s3c_udc_otg.o
+COBJS-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o
COBJS-$(CONFIG_USBDOWNLOAD_GADGET) += g_dnl.o
COBJS-$(CONFIG_DFU_FUNCTION) += f_dfu.o
endif
diff --git a/drivers/usb/gadget/fotg210.c b/drivers/usb/gadget/fotg210.c
new file mode 100644
index 0000000..640ae55
--- /dev/null
+++ b/drivers/usb/gadget/fotg210.c
@@ -0,0 +1,926 @@
+/*
+ * Faraday USB 2.0 OTG Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu at faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <config.h>
+#include <net.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <linux/types.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include "fotg210.h"
+
+#define CFG_HALF_SPEED 0
+#define CFG_LOW_TIMING 0
+#define CFG_NUM_ENDPOINTS 4
+#define CFG_EP0_MAX_PACKET_SIZE 64
+#define CFG_EPX_MAX_PACKET_SIZE 512
+
+struct fotg210_chip;
+
+struct fotg210_ep {
+ struct usb_ep ep;
+
+ uint32_t maxpacket:16;
+ uint32_t id:4;
+ uint32_t stopped:1;
+ uint32_t rsvd:11;
+
+ struct list_head queue;
+ const struct usb_endpoint_descriptor *desc;
+ struct fotg210_chip *chip;
+};
+
+struct fotg210_request {
+ struct usb_request req;
+ struct list_head queue;
+ struct fotg210_ep *ep;
+};
+
+struct fotg210_chip {
+ struct usb_gadget gadget;
+ struct usb_gadget_driver *driver;
+ uint32_t iobase;
+ uint8_t irq;
+ uint16_t addr;
+ int pullup;
+ enum usb_device_state state;
+ struct fotg210_ep ep[1 + CFG_NUM_ENDPOINTS];
+};
+
+static struct usb_endpoint_descriptor ep0_desc = {
+ .bLength = sizeof(struct usb_endpoint_descriptor),
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
+};
+
+#define USB_REG32(chip, off) *(volatile uint32_t *)((chip)->iobase + (off))
+
+static inline int
+fifo_to_ep(struct fotg210_chip *chip, int id, int in)
+{
+ return (id < 0) ? 0 : ((id % 4) + 1);
+}
+
+static inline int
+ep_to_fifo(struct fotg210_chip *chip, int id)
+{
+ return (id <= 0) ? -1 : ((id - 1) % 4);
+}
+
+static inline int
+ep_reset(struct fotg210_chip *chip, uint8_t ep_addr)
+{
+ int ep = ep_addr & USB_ENDPOINT_NUMBER_MASK;
+
+ if (ep_addr & USB_DIR_IN) {
+ /* input */
+ USB_REG32(chip, REG_IEP1 + (ep - 1) * 4) |= BIT(12);
+ USB_REG32(chip, REG_IEP1 + (ep - 1) * 4) &= ~BIT(12);
+ USB_REG32(chip, REG_IEP1 + (ep - 1) * 4) &= ~BIT(11);
+ } else {
+ /* output */
+ USB_REG32(chip, REG_OEP1 + (ep - 1) * 4) |= BIT(12);
+ USB_REG32(chip, REG_OEP1 + (ep - 1) * 4) &= BIT(12);
+ USB_REG32(chip, REG_OEP1 + (ep - 1) * 4) &= BIT(11);
+ }
+
+ return 0;
+}
+
+static int
+fotg210_reset(struct fotg210_chip *chip)
+{
+ chip->state = USB_STATE_POWERED;
+
+ /* device address reset */
+ chip->addr = 0;
+ USB_REG32(chip, REG_DCAR) = 0;
+
+ /* enable the chip and perform a soft reset later */
+ USB_REG32(chip, REG_DCCR) = BIT(5);
+
+ /* set idle counter */
+ USB_REG32(chip, REG_DCIDLE) = 7;
+
+ /* disable interrupts */
+ USB_REG32(chip, REG_HCIER) = 0;
+ USB_REG32(chip, REG_DCIMR) = 0x3;
+ USB_REG32(chip, REG_DCIMR0) = 0x3F;
+ USB_REG32(chip, REG_DCIMR1) = 0xF00FF;
+ USB_REG32(chip, REG_DCIMR2) = 0x7FF;
+
+ /* clear interrupts */
+ USB_REG32(chip, REG_HCISR) = 0x3F;
+ USB_REG32(chip, REG_OTGISR) = 0x1FFF;
+ USB_REG32(chip, REG_DCISR) = 0;
+ USB_REG32(chip, REG_DCISR0) = 0;
+ USB_REG32(chip, REG_DCISR1) = 0;
+ USB_REG32(chip, REG_DCISR2) = 0;
+
+ /* soft reset */
+ USB_REG32(chip, REG_DCCR) |= BIT(4);
+ while (USB_REG32(chip, REG_DCCR) & BIT(4))
+ ;
+
+ /* CX FIFO reset */
+ USB_REG32(chip, REG_DCCXFIFO) |= BIT(3);
+ while (USB_REG32(chip, REG_DCCXFIFO) & BIT(3))
+ ;
+
+ /* create static ep-fifo map (EP1-FIFO0, EP2-FIFO1 ...)*/
+ USB_REG32(chip, REG_EPMAP14) = 0x33221100;
+ USB_REG32(chip, REG_EPMAP58) = 0x00000000;
+ USB_REG32(chip, REG_FIFOMAP) = 0x04030201;
+ USB_REG32(chip, REG_FIFOCFG) = 0x00000000;
+ USB_REG32(chip, REG_IEP1) = CFG_EPX_MAX_PACKET_SIZE;
+ USB_REG32(chip, REG_IEP2) = CFG_EPX_MAX_PACKET_SIZE;
+ USB_REG32(chip, REG_IEP3) = CFG_EPX_MAX_PACKET_SIZE;
+ USB_REG32(chip, REG_IEP4) = CFG_EPX_MAX_PACKET_SIZE;
+ USB_REG32(chip, REG_IEP5) = CFG_EPX_MAX_PACKET_SIZE;
+ USB_REG32(chip, REG_IEP6) = CFG_EPX_MAX_PACKET_SIZE;
+ USB_REG32(chip, REG_IEP7) = CFG_EPX_MAX_PACKET_SIZE;
+ USB_REG32(chip, REG_IEP8) = CFG_EPX_MAX_PACKET_SIZE;
+ USB_REG32(chip, REG_OEP1) = CFG_EPX_MAX_PACKET_SIZE;
+ USB_REG32(chip, REG_OEP2) = CFG_EPX_MAX_PACKET_SIZE;
+ USB_REG32(chip, REG_OEP3) = CFG_EPX_MAX_PACKET_SIZE;
+ USB_REG32(chip, REG_OEP4) = CFG_EPX_MAX_PACKET_SIZE;
+ USB_REG32(chip, REG_OEP5) = CFG_EPX_MAX_PACKET_SIZE;
+ USB_REG32(chip, REG_OEP6) = CFG_EPX_MAX_PACKET_SIZE;
+ USB_REG32(chip, REG_OEP7) = CFG_EPX_MAX_PACKET_SIZE;
+ USB_REG32(chip, REG_OEP8) = CFG_EPX_MAX_PACKET_SIZE;
+
+ /* reset EP FIFO */
+ USB_REG32(chip, REG_FIFO0) |= BIT(12);
+ while (USB_REG32(chip, REG_FIFO0) & BIT(12))
+ ;
+ USB_REG32(chip, REG_FIFO1) |= BIT(12);
+ while (USB_REG32(chip, REG_FIFO1) & BIT(12))
+ ;
+ USB_REG32(chip, REG_FIFO2) |= BIT(12);
+ while (USB_REG32(chip, REG_FIFO2) & BIT(12))
+ ;
+ USB_REG32(chip, REG_FIFO3) |= BIT(12);
+ while (USB_REG32(chip, REG_FIFO3) & BIT(12))
+ ;
+
+ /* disable OTG interrupts */
+ USB_REG32(chip, REG_OTGIER) = 0;
+ USB_REG32(chip, REG_ISR) = BIT(2) | BIT(1) | BIT(0);
+ USB_REG32(chip, REG_IMR) = BIT(3) | BIT(2) | BIT(1); /* active high, no OTG & Host */
+
+ /* disable EP0 IN/OUT interrupt */
+ USB_REG32(chip, REG_DCIMR0) = BIT(2) | BIT(1);
+ /* disable EPX IN+SPK+OUT interrupts */
+ USB_REG32(chip, REG_DCIMR1) = 0xF00FF;
+ /* disable wakeup+idle+dma+zlp interrupts */
+ USB_REG32(chip, REG_DCIMR2) = BIT(10) | BIT(9) | BIT(8) | BIT(7) | BIT(6) | BIT(5);
+ /* enable all interrupt source group */
+ USB_REG32(chip, REG_DCIMR) = 0;
+
+ /* suspend delay = 7 ms */
+ USB_REG32(chip, REG_DCIDLE) = 3;
+
+ /* turn-on global interrupts */
+ USB_REG32(chip, REG_DCCR) |= BIT(2);
+
+#if CFG_HALF_SPEED
+ /* half-speed */
+ USB_REG32(chip, REG_DCCR) |= BIT(1);
+#endif
+
+#if CFG_LOW_TIMING
+ /* low timing */
+ USB_REG32(chip, REG_OTGCSR) |= BIT(11) | BIT(10) | BIT(9);
+#endif
+
+ return 0;
+}
+
+static int
+fotg210_dma(struct fotg210_ep *ep, struct fotg210_request *req)
+{
+ struct fotg210_chip *chip = ep->chip;
+ uint32_t tmp, timeout;
+ uint8_t *buf = req->req.buf + req->req.actual;
+ uint32_t len = req->req.length - req->req.actual;
+ uint32_t fifo = ep_to_fifo(chip, ep->id);
+ int rc = 0;
+
+ /* 1. init dma buffer */
+ if (len > ep->maxpacket)
+ len = ep->maxpacket;
+
+ /* 2. wait for dma ready (hardware) */
+ for (timeout = 5000; timeout; --timeout) {
+ if (!(USB_REG32(chip, REG_DMAPARAM1) & BIT(0)))
+ break;
+ udelay(1);
+ }
+ if (timeout == 0) {
+ printf("fotg210: dma busy (0x%08X)\n", USB_REG32(chip, REG_DMAFIFO));
+ req->req.status = -EBUSY;
+ return -EBUSY;
+ }
+
+ /* 3. DMA target setup */
+#ifndef CONFIG_SYS_DCACHE_OFF
+ if (ep->desc->bEndpointAddress & USB_DIR_IN)
+ flush_dcache_range((uint32_t)buf, (uint32_t)buf + len);
+ else
+ invalidate_dcache_range((uint32_t)buf, (uint32_t)buf + len);
+#endif
+ USB_REG32(chip, REG_DMAPARAM2) = virt_to_phys(buf);
+
+ if (ep->desc->bEndpointAddress & USB_DIR_IN) {
+ if (ep->id == 0) {
+ /* Wait until fifo empty */
+ while (!(USB_REG32(chip, REG_DCCXFIFO) & BIT(5)))
+ ;
+ USB_REG32(chip, REG_DMAFIFO) = BIT(4);
+ } else {
+ /* Wait until fifo empty */
+ while (!(USB_REG32(chip, REG_DCCXFIFO) & (1 << (8 + fifo))))
+ ;
+ USB_REG32(chip, REG_DMAFIFO) = 1 << fifo;
+ }
+ USB_REG32(chip, REG_DMAPARAM1) = len << 8 | BIT(1);
+ } else {
+ uint32_t blen;
+ if (ep->id == 0) {
+ USB_REG32(chip, REG_DMAFIFO) = BIT(4);
+ do {
+ blen = USB_REG32(chip, REG_DCCXFIFO) >> 24;
+ } while (blen < len);
+ } else {
+ USB_REG32(chip, REG_DMAFIFO) = 1 << fifo;
+ blen = USB_REG32(chip, REG_FIFO0 + (4 * fifo)) & 0x7FF;
+ }
+ len = (len < blen) ? len : blen;
+ USB_REG32(chip, REG_DMAPARAM1) = len << 8;
+ }
+
+ /* 4. DMA kick-off */
+ USB_REG32(chip, REG_DMAPARAM1) |= BIT(0);
+
+ /* 5. DMA wait */
+ rc = -EBUSY;
+ for (timeout = 250000; timeout; --timeout) {
+ tmp = USB_REG32(chip, REG_DCISR2);
+ /* DMA complete */
+ if (tmp & BIT(7)) {
+ rc = 0;
+ break;
+ }
+ /* DMA error */
+ if (tmp & BIT(8)) {
+ printf("fotg210: dma error\n");
+ break;
+ }
+ /* resume, suspend, reset */
+ if (tmp & (BIT(2) | BIT(1) | BIT(0))) {
+ printf("fotg210: dma reset by host\n");
+ break;
+ }
+ udelay(1);
+ }
+
+ /* 7. DMA target reset */
+ if (rc)
+ USB_REG32(chip, REG_DMAPARAM1) |= BIT(3);
+ USB_REG32(chip, REG_DCISR2) &= 0x7f;
+ USB_REG32(chip, REG_DMAFIFO) = 0;
+
+ req->req.status = rc;
+ if (rc == 0)
+ req->req.actual += len;
+ else
+ printf("fotg210: ep%d dma error(code=%d)\n", ep->id, rc);
+
+ return len;
+}
+
+/*
+ * result of setup packet
+ */
+#define CX_IDLE 0
+#define CX_FINISH 1
+#define CX_STALL 2
+
+static void
+fotg210_setup(struct fotg210_chip *chip)
+{
+ int rc = CX_IDLE;
+ uint32_t tmp[2];
+ struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)tmp;
+
+ /*
+ * If this is the first Cx 8 byte command,
+ * we can now query USB mode (high/full speed; USB 2.0/USB 1.0)
+ */
+ if (chip->state == USB_STATE_POWERED) {
+ chip->state = USB_STATE_DEFAULT;
+ if (USB_REG32(chip, REG_OTGCSR) & BIT(21)) {
+ /* Mini-B */
+ if (USB_REG32(chip, REG_DCCR) & BIT(6)) {
+ puts("fotg210: HS\n");
+ chip->gadget.speed = USB_SPEED_HIGH;
+ USB_REG32(chip, REG_DCSOFMTR) = 0x044C;
+ } else {
+ puts("fotg210: FS\n");
+ chip->gadget.speed = USB_SPEED_FULL;
+ USB_REG32(chip, REG_DCSOFMTR) = 0x2710;
+ }
+ } else {
+ printf("fotg210: mini-A?\n");
+ }
+ }
+
+ /* switch data port to ep0 */
+ USB_REG32(chip, REG_DMAFIFO) = BIT(4);
+ /* fetch 8 bytes setup packet */
+ tmp[0] = USB_REG32(chip, REG_DMAPARAM3);
+ tmp[1] = USB_REG32(chip, REG_DMAPARAM3);
+ /* release data port */
+ USB_REG32(chip, REG_DMAFIFO) = 0;
+
+ if (req->bRequestType & USB_DIR_IN)
+ ep0_desc.bEndpointAddress = USB_DIR_IN;
+ else
+ ep0_desc.bEndpointAddress = USB_DIR_OUT;
+
+ rc = CX_IDLE;
+
+ if ((req->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+ switch (req->bRequest) {
+ case USB_REQ_SET_CONFIGURATION:
+ printf("fotg210: set_cfg(%d)\n", req->wValue & 0x00FF);
+ if ((req->wValue & 0x00FF) == 0) {
+ chip->state = USB_STATE_ADDRESS;
+ USB_REG32(chip, REG_DCAR) = chip->addr;
+ } else {
+ chip->state = USB_STATE_CONFIGURED;
+ USB_REG32(chip, REG_DCAR) = chip->addr | BIT(7);
+ }
+ rc = CX_IDLE;
+ break;
+
+ case USB_REQ_SET_ADDRESS:
+ printf("fotg210: set_addr(0x%04X)\n", req->wValue);
+ chip->state = USB_STATE_ADDRESS;
+ chip->addr = req->wValue;
+ rc = CX_FINISH;
+ USB_REG32(chip, REG_DCAR) = chip->addr;
+ break;
+
+ case USB_REQ_CLEAR_FEATURE:
+ printf("fotg210: clr_feature(%d, %d)\n", req->bRequestType & 0x03, req->wValue);
+ switch (req->wValue) {
+ case 0: /* [Endpoint] halt */
+ ep_reset(chip, req->wIndex);
+ rc = CX_FINISH;
+ break;
+
+ case 1: /* [Device] remote wake-up */
+ case 2: /* [Device] test mode */
+ default:
+ rc = CX_STALL;
+ break;
+ }
+ break;
+
+ case USB_REQ_SET_FEATURE:
+ printf("fotg210: set_feature(%d, %d)\n", req->wValue, req->wIndex & 0xf);
+ switch (req->wValue) {
+ case 0: /* Endpoint Halt */
+ do {
+ int id = req->wIndex & 0xf;
+ USB_REG32(chip, REG_IEP1 + (id - 1) * 4) |= BIT(11);
+ USB_REG32(chip, REG_OEP1 + (id - 1) * 4) |= BIT(11);
+ } while (0);
+ rc = CX_FINISH;
+ break;
+ case 1: /* Remote Wakeup */
+ case 2: /* Test Mode */
+ default:
+ rc = CX_STALL;
+ break;
+ }
+ break;
+
+ case USB_REQ_GET_STATUS:
+ printf("fotg210: get_status\n");
+ rc = CX_STALL;
+ break;
+
+ case USB_REQ_SET_DESCRIPTOR:
+ printf("fotg210: set_descriptor\n");
+ rc = CX_STALL;
+ break;
+
+ case USB_REQ_SYNCH_FRAME:
+ printf("fotg210: sync frame\n");
+ rc = CX_STALL;
+ break;
+ }
+ } /* if ((req->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) */
+
+ if (rc == CX_IDLE && chip->driver->setup) {
+ if (chip->driver->setup(&chip->gadget, req) < 0)
+ rc = CX_STALL;
+ else
+ rc = CX_FINISH;
+ }
+
+ switch (rc) {
+ case CX_FINISH:
+ USB_REG32(chip, REG_DCCXFIFO) |= BIT(0);
+ break;
+
+ case CX_STALL:
+ USB_REG32(chip, REG_DCCXFIFO) |= (BIT(2) | BIT(0));
+ printf("fotg210: cx_stall?\n");
+ break;
+
+ case CX_IDLE:
+ printf("fotg210: cx_idle?\n");
+ default:
+ break;
+ }
+}
+
+/*
+ * fifo - FIFO id
+ * zlp - zero length packet
+ */
+static void
+fotg210_recv(struct fotg210_chip *chip, int ep_id)
+{
+ struct fotg210_ep *ep = chip->ep + ep_id;
+ struct fotg210_request *req;
+ int len;
+
+ if (ep->stopped || (ep->desc->bEndpointAddress & USB_DIR_IN)) {
+ printf("fotg210: ep%d recv, invalid!\n", ep->id);
+ return;
+ }
+
+ if (list_empty(&ep->queue)) {
+ printf("fotg210: ep%d recv, drop!\n", ep->id);
+ return;
+ }
+
+ req = list_first_entry(&ep->queue, struct fotg210_request, queue);
+ len = fotg210_dma(ep, req);
+ if (len < ep->ep.maxpacket || req->req.length <= req->req.actual) {
+ list_del_init(&req->queue);
+ if (req->req.complete)
+ req->req.complete(&ep->ep, &req->req);
+ }
+
+ if (ep->id > 0 && list_empty(&ep->queue))
+ USB_REG32(chip, REG_DCIMR1) |= 0x03 << (ep_to_fifo(chip, ep->id) * 2);
+}
+
+/*
+ * USB Gadget Layer
+ */
+static int
+fotg210_ep_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
+{
+ struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
+ struct fotg210_chip *chip = ep->chip;
+ int id = ep_to_fifo(chip, ep->id);
+ int in = (desc->bEndpointAddress & USB_DIR_IN) ? 1 : 0;
+
+ if (!_ep || !desc
+ || desc->bDescriptorType != USB_DT_ENDPOINT
+ || le16_to_cpu(desc->wMaxPacketSize) == 0) {
+ printf("fotg210: bad ep or descriptor\n");
+ return -EINVAL;
+ }
+
+ ep->desc = desc;
+ ep->stopped = 0;
+
+ if (in)
+ USB_REG32(chip, REG_FIFOMAP) |= 0x10 << (8 * id);
+
+ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ return -EINVAL;
+
+ case USB_ENDPOINT_XFER_ISOC:
+ USB_REG32(chip, REG_FIFOCFG) |= 0x21 << (8 * id);
+ break;
+
+ case USB_ENDPOINT_XFER_BULK:
+ USB_REG32(chip, REG_FIFOCFG) |= 0x22 << (8 * id);
+ break;
+
+ case USB_ENDPOINT_XFER_INT:
+ USB_REG32(chip, REG_FIFOCFG) |= 0x23 << (8 * id);
+ break;
+ }
+
+ return 0;
+}
+
+static int
+fotg210_ep_disable (struct usb_ep *_ep)
+{
+ struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
+ struct fotg210_chip *chip = ep->chip;
+ int id = ep_to_fifo(chip, ep->id);
+
+ ep->desc = NULL;
+ ep->stopped = 1;
+
+ USB_REG32(chip, REG_FIFOCFG) &= ~(0x23 << (8 * id));
+ USB_REG32(chip, REG_FIFOMAP) &= ~(0x30 << (8 * id));
+
+ return 0;
+}
+
+static struct usb_request *
+fotg210_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags) {
+ struct fotg210_request *req = malloc(sizeof(*req));
+ if (req) {
+ memset(req, 0, sizeof(*req));
+ INIT_LIST_HEAD(&req->queue);
+ }
+ return &req->req;
+}
+
+static void
+fotg210_ep_free_request (struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct fotg210_request *req = container_of(_req, struct fotg210_request, req);
+ free(req);
+}
+
+static int
+fotg210_ep_queue (struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
+{
+ struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
+ struct fotg210_chip *chip = ep->chip;
+ struct fotg210_request *req = container_of(_req, struct fotg210_request, req);
+
+ if (!_req || !_req->complete || !_req->buf || !list_empty(&req->queue)) {
+ printf("fotg210: invalid request to ep%d\n", ep->id);
+ return -EINVAL;
+ }
+
+ if (!chip || chip->state == USB_STATE_SUSPENDED) {
+ printf("fotg210: request while chip suspend!?\n");
+ return -EINVAL;
+ }
+
+ req->req.actual = 0;
+ req->req.status = -EINPROGRESS;
+
+ if (req->req.length == 0) {
+ req->req.status = 0;
+ if (req->req.complete)
+ req->req.complete(&ep->ep, &req->req);
+ return 0;
+ }
+
+ if (ep->id == 0) {
+ do {
+ int len = fotg210_dma(ep, req);
+ if (len < ep->ep.maxpacket)
+ break;
+ if (ep->desc->bEndpointAddress & USB_DIR_IN)
+ udelay(100);
+ } while (req->req.length > req->req.actual);
+ } else {
+ if (ep->desc->bEndpointAddress & USB_DIR_IN) {
+ do {
+ int len = fotg210_dma(ep, req);
+ if (len < ep->ep.maxpacket)
+ break;
+ } while (req->req.length > req->req.actual);
+ } else {
+ list_add_tail(&req->queue, &ep->queue);
+ USB_REG32(chip, REG_DCIMR1) &= ~(0x03 << (ep_to_fifo(chip, ep->id) * 2));
+ }
+ }
+
+ if (ep->id == 0 || (ep->desc->bEndpointAddress & USB_DIR_IN)) {
+ if (req->req.complete)
+ req->req.complete(&ep->ep, &req->req);
+ }
+
+ return 0;
+}
+
+static int
+fotg210_ep_dequeue (struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
+ struct fotg210_request *req;
+
+ /* make sure it's actually queued on this endpoint */
+ list_for_each_entry (req, &ep->queue, queue) {
+ if (&req->req == _req)
+ break;
+ }
+ if (&req->req != _req) {
+ return -EINVAL;
+ }
+
+ /* remove the request */
+ list_del_init(&req->queue);
+
+ /* update status & invoke complete callback */
+ if (req->req.status == -EINPROGRESS) {
+ req->req.status = -ECONNRESET;
+ if (req->req.complete)
+ req->req.complete(_ep, &req->req);
+ }
+
+ return 0;
+}
+
+static int
+fotg210_ep_halt (struct usb_ep *_ep, int halt)
+{
+ struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
+ struct fotg210_chip *chip = ep->chip;
+ int rc = -1;
+
+ printf("fotg210: ep%d halt=%d\n", ep->id, halt);
+
+ /* Endpoint STALL */
+ if (ep->id > 0 && ep->id <= CFG_NUM_ENDPOINTS) {
+ if (halt) {
+ /* wait until fifo empty */
+ while ((USB_REG32(chip, REG_DCCXFIFO) & 0xf00) != 0xf00)
+ ;
+ /* stall */
+ if (ep->desc->bEndpointAddress & USB_DIR_IN)
+ USB_REG32(chip, REG_IEP1 + (ep->id - 1) * 4) |= BIT(11);
+ else
+ USB_REG32(chip, REG_OEP1 + (ep->id - 1) * 4) |= BIT(11);
+ } else {
+ if (ep->desc->bEndpointAddress & USB_DIR_IN)
+ USB_REG32(chip, REG_IEP1 + (ep->id - 1) * 4) &= ~BIT(11);
+ else
+ USB_REG32(chip, REG_OEP1 + (ep->id - 1) * 4) &= ~BIT(11);
+ }
+ rc = 0;
+ }
+
+ return rc;
+}
+
+/*
+ * activate/deactivate link with host.
+ */
+static void
+pullup(struct fotg210_chip *chip, int is_on)
+{
+ if (is_on) {
+ if (!chip->pullup) {
+ chip->state = USB_STATE_POWERED;
+ chip->pullup = 1;
+ /* enable the chip */
+ USB_REG32(chip, REG_DCCR) |= BIT(5);
+ /* clear unplug bit (BIT0) */
+ USB_REG32(chip, 0x114) &= (~BIT(0));
+ }
+ } else {
+ chip->state = USB_STATE_NOTATTACHED;
+ chip->pullup = 0;
+ USB_REG32(chip, REG_DCAR) = 0;
+ /* set unplug bit (BIT0) */
+ USB_REG32(chip, 0x114) |= BIT(0);
+ /* disable the chip */
+ USB_REG32(chip, REG_DCCR) &= ~BIT(5);
+ }
+}
+
+static int
+fotg210_pullup (struct usb_gadget *_gadget, int is_on)
+{
+ struct fotg210_chip *chip = container_of(_gadget, struct fotg210_chip, gadget);
+
+ printf("fotg210: pullup=%d\n", is_on);
+ pullup(chip, is_on);
+
+ return 0;
+}
+
+static int
+fotg210_get_frame(struct usb_gadget *_gadget)
+{
+ struct fotg210_chip *chip = container_of(_gadget, struct fotg210_chip, gadget);
+ return USB_REG32(chip, REG_DCSOFFNR) & 0x7ff;
+}
+
+static struct usb_gadget_ops fotg210_gadget_ops = {
+ .get_frame = fotg210_get_frame,
+ .pullup = fotg210_pullup,
+};
+
+static struct usb_ep_ops fotg210_ep_ops = {
+ .enable = fotg210_ep_enable,
+ .disable = fotg210_ep_disable,
+ .queue = fotg210_ep_queue,
+ .dequeue = fotg210_ep_dequeue,
+ .set_halt = fotg210_ep_halt,
+ .alloc_request = fotg210_ep_alloc_request,
+ .free_request = fotg210_ep_free_request,
+};
+
+static struct fotg210_chip controller = {
+ .iobase = CONFIG_FOTG210_BASE,
+ .gadget = {
+ .name = "fotg210_udc",
+ .ops = &fotg210_gadget_ops,
+ .ep0 = &controller.ep[0].ep,
+ .speed = USB_SPEED_UNKNOWN,
+ .is_dualspeed = 1,
+ .is_otg = 0,
+ .is_a_peripheral = 0,
+ .b_hnp_enable = 0,
+ .a_hnp_support = 0,
+ .a_alt_hnp_support = 0,
+ },
+ .ep[0] = {
+ .id = 0,
+ .ep = {
+ .name = "ep0",
+ .ops = &fotg210_ep_ops,
+ },
+ .desc = &ep0_desc,
+ .chip = &controller,
+ .maxpacket = CFG_EP0_MAX_PACKET_SIZE,
+ },
+ .ep[1] = {
+ .id = 1,
+ .ep = {
+ .name = "ep1",
+ .ops = &fotg210_ep_ops,
+ },
+ .chip = &controller,
+ .maxpacket = CFG_EPX_MAX_PACKET_SIZE,
+ },
+ .ep[2] = {
+ .id = 2,
+ .ep = {
+ .name = "ep2",
+ .ops = &fotg210_ep_ops,
+ },
+ .chip = &controller,
+ .maxpacket = CFG_EPX_MAX_PACKET_SIZE,
+ },
+ .ep[3] = {
+ .id = 3,
+ .ep = {
+ .name = "ep3",
+ .ops = &fotg210_ep_ops,
+ },
+ .chip = &controller,
+ .maxpacket = CFG_EPX_MAX_PACKET_SIZE,
+ },
+ .ep[4] = {
+ .id = 4,
+ .ep = {
+ .name = "ep4",
+ .ops = &fotg210_ep_ops,
+ },
+ .chip = &controller,
+ .maxpacket = CFG_EPX_MAX_PACKET_SIZE,
+ },
+};
+
+int usb_gadget_handle_interrupts(void)
+{
+ struct fotg210_chip *chip = &controller;
+ uint32_t isr, dcisr;
+
+ isr = USB_REG32(chip, REG_ISR) & (~USB_REG32(chip, REG_IMR));
+ dcisr = USB_REG32(chip, REG_DCISR) & (~USB_REG32(chip, REG_DCIMR));
+ if (!(isr & BIT(0)) || dcisr == 0)
+ return 0;
+
+ USB_REG32(chip, REG_ISR) = BIT(0);
+
+ /* CX interrupts */
+ if (dcisr & BIT(0)) {
+ uint32_t st = USB_REG32(chip, REG_DCISR0);
+ USB_REG32(chip, REG_DCISR0) = 0;
+
+ if (st & BIT(4))
+ printf("fotg210: cmd error\n");
+
+ if (st & BIT(5))
+ printf("fotg210: cmd abort\n");
+
+ if (st & BIT(0)) /* setup */
+ fotg210_setup(chip);
+ else if (st & BIT(3)) /* command finish */
+ USB_REG32(chip, REG_DCCXFIFO) |= BIT(0);
+ }
+
+ /* FIFO interrupts */
+ if (dcisr & BIT(1)) {
+ uint32_t id;
+ uint32_t st = USB_REG32(chip, REG_DCISR1);
+ for (id = 0; id < 4; ++id) {
+ if (st & (3 << (id * 2)))
+ fotg210_recv(chip, fifo_to_ep(chip, id, 0));
+ }
+ }
+
+ /* Device Status Interrupts */
+ if (dcisr & BIT(2)) {
+ uint32_t st = USB_REG32(chip, REG_DCISR2);
+ USB_REG32(chip, REG_DCISR2) = 0;
+
+ if (st & BIT(0)) {
+ printf("fotg210: reset by host\n");
+ } else if (st & BIT(1)) {
+ printf("fotg210: suspend/removed\n");
+ } else if (st & BIT(2)) {
+ printf("fotg210: resume\n");
+ }
+
+ /* Errors */
+ if (st & BIT(3))
+ printf("fotg210: iso error\n");
+ if (st & BIT(4))
+ printf("fotg210: iso abort\n");
+ if (st & BIT(8))
+ printf("fotg210: dma error\n");
+ }
+
+ return 0;
+}
+
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+ int i, rc = 0;
+ struct fotg210_chip *chip = &controller;
+
+ if (!driver || !driver->bind || !driver->setup) {
+ puts("fotg210: bad parameter.\n");
+ return -EINVAL;
+ }
+
+ INIT_LIST_HEAD(&chip->gadget.ep_list);
+ for (i = 0; i < CFG_NUM_ENDPOINTS + 1; ++i) {
+ struct fotg210_ep *ep = chip->ep + i;
+
+ ep->ep.maxpacket = ep->maxpacket;
+ INIT_LIST_HEAD(&ep->queue);
+
+ if (ep->id == 0) {
+ ep->stopped = 0;
+ } else {
+ ep->stopped = 1;
+ list_add_tail(&ep->ep.ep_list, &chip->gadget.ep_list);
+ }
+ }
+
+ if (fotg210_reset(chip)) {
+ puts("fotg210: reset failed.\n");
+ return -EINVAL;
+ }
+
+ rc = driver->bind(&chip->gadget);
+ if (rc) {
+ printf("fotg210: driver->bind() returned %d\n", rc);
+ dcache_enable();
+ return rc;
+ }
+ chip->driver = driver;
+
+ return rc;
+}
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+ struct fotg210_chip *chip = &controller;
+
+ driver->unbind(&chip->gadget);
+ chip->driver = NULL;
+
+ pullup(chip, 0);
+
+ return 0;
+}
diff --git a/drivers/usb/gadget/fotg210.h b/drivers/usb/gadget/fotg210.h
new file mode 100644
index 0000000..b5f9842
--- /dev/null
+++ b/drivers/usb/gadget/fotg210.h
@@ -0,0 +1,99 @@
+/*
+ * Faraday USB 2.0 OTG Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu at faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#ifndef FOTG210_H
+#define FOTG210_H
+
+#ifndef BIT
+#define BIT(nr) (1UL << (nr))
+#endif
+
+#define REG_HCISR 0x014 /* Host Controller: Interupt Status Register */
+#define REG_HCIER 0x018 /* Host Controller: Interupt Enable Register */
+
+/*
+ * Global Registers
+ */
+#define REG_ISR 0x0C0 /* Interrupt Status */
+#define REG_IMR 0x0C4 /* Interrupt Control */
+
+/*
+ * OTG Registers
+ */
+#define REG_OTGCSR 0x080 /* OTG Control Status */
+#define REG_OTGISR 0x084 /* OTG Interrupt Status */
+#define REG_OTGIER 0x088 /* OTG Interrupt Enable Register */
+
+/*
+ * Device Registers
+ */
+#define REG_DCCR 0x100 /* Device Controller: Control Register */
+#define REG_DCAR 0x104 /* Device Address */
+#define REG_DCTSTR 0x108 /* Device Test */
+#define REG_DCSOFFNR 0x10C /* Device SOF Frame Number */
+#define REG_DCSOFMTR 0x110 /* Device SOF Frame Number */
+
+#define REG_DCCXR 0x11C /* Device CX Configuration */
+#define REG_DCCXFIFO 0x120 /* Device CX FIFO */
+#define REG_DCIDLE 0x124 /* Device Idle Counter */
+
+#define REG_DCIMR 0x130 /* Device Group Interrupt Mask */
+#define REG_DCIMR0 0x134 /* Device Group 0 Interrupt Mask */
+#define REG_DCIMR1 0x138 /* Device Group 1 Interrupt Mask */
+#define REG_DCIMR2 0x13C /* Device Group 2 Interrupt Mask */
+#define REG_DCISR 0x140 /* Device Group Interrupt Status */
+#define REG_DCISR0 0x144 /* Device Group 0 Interrupt Status */
+#define REG_DCISR1 0x148 /* Device Group 1 Interrupt Status */
+#define REG_DCISR2 0x14C /* Device Group 2 Interrupt Status */
+
+#define REG_DCRXZLPKT 0x150 /* Device Receive Zero-Length Packet */
+#define REG_DCTXZLPKT 0x154 /* Device Receive Zero-Length Packet */
+#define REG_DCISOERR 0x158 /* Device ISO Error/Abort */
+
+#define REG_IEP1 0x160 /* Device IN Endpoint */
+#define REG_IEP2 0x164 /* Device IN Endpoint */
+#define REG_IEP3 0x168 /* Device IN Endpoint */
+#define REG_IEP4 0x16C /* Device IN Endpoint */
+#define REG_IEP5 0x170 /* Device IN Endpoint */
+#define REG_IEP6 0x174 /* Device IN Endpoint */
+#define REG_IEP7 0x178 /* Device IN Endpoint */
+#define REG_IEP8 0x17C /* Device IN Endpoint */
+
+#define REG_OEP1 0x180 /* Device OUT Endpoint */
+#define REG_OEP2 0x184 /* Device OUT Endpoint */
+#define REG_OEP3 0x188 /* Device OUT Endpoint */
+#define REG_OEP4 0x18C /* Device OUT Endpoint */
+#define REG_OEP5 0x190 /* Device OUT Endpoint */
+#define REG_OEP6 0x194 /* Device OUT Endpoint */
+#define REG_OEP7 0x198 /* Device OUT Endpoint */
+#define REG_OEP8 0x19C /* Device OUT Endpoint */
+
+#define REG_EPMAP14 0x1A0 /* Device Endpoint Map 1 ~ 4 */
+#define REG_EPMAP58 0x1A4 /* Device Endpoint Map 5 ~ 8 */
+#define REG_FIFOMAP 0x1A8 /* Device FIFO Map */
+#define REG_FIFOCFG 0x1AC /* Device FIFO Configuration */
+
+#define REG_FIFO0 0x1B0 /* Device FIFO 0 */
+#define REG_FIFO1 0x1B4 /* Device FIFO 1 */
+#define REG_FIFO2 0x1B8 /* Device FIFO 2 */
+#define REG_FIFO3 0x1BC /* Device FIFO 3 */
+
+#define REG_DMAFIFO 0x1C0 /* Device DMA Target FIFO */
+#define REG_DMAPARAM1 0x1C8 /* Device DMA Parameter 1 */
+#define REG_DMAPARAM2 0x1CC /* Device DMA Parameter 2 */
+#define REG_DMAPARAM3 0x1D0 /* Device DMA Parameter 3 */
+
+#define ERR_ISOERR 0
+#define ERR_ISOABT 1
+#define ERR_DMAERR 2
+#define ERR_CMDERR 3
+#define ERR_CMDABT 4
+
+#endif
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index e570142..f038747 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -150,6 +150,12 @@
#define gadget_is_mv(g) 0
#endif
+#ifdef CONFIG_USB_GADGET_FOTG210
+#define gadget_is_fotg210(g) (!strcmp("fotg210_udc", (g)->name))
+#else
+#define gadget_is_fotg210(g) 0
+#endif
+
/*
* CONFIG_USB_GADGET_SX2
* CONFIG_USB_GADGET_AU1X00
@@ -215,5 +221,7 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
return 0x20;
else if (gadget_is_mv(gadget))
return 0x21;
+ else if (gadget_is_fotg210(gadget))
+ return 0x22;
return -ENOENT;
}
--
1.7.9.5
More information about the U-Boot
mailing list