[U-Boot] [PATCH 1/3] cmd_scsi: fix formatting before making additional changes
Mark Langsdorf
mark.langsdorf at calxeda.com
Tue Sep 10 22:19:15 CEST 2013
Signed-off-by: Mark Langsdorf <mark.langsdorf at calxeda.com>
---
common/cmd_scsi.c | 498 ++++++++++++++++++++++++++++--------------------------
1 file changed, 255 insertions(+), 243 deletions(-)
diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c
index 7b97dc9..bbaed41 100644
--- a/common/cmd_scsi.c
+++ b/common/cmd_scsi.c
@@ -78,67 +78,72 @@ void scsi_scan(int mode)
unsigned char i,perq,modi,lun;
lbaint_t capacity;
unsigned long blksz;
- ccb* pccb=(ccb *)&tempccb;
+ ccb* pccb = (ccb *) &tempccb;
- if(mode==1) {
+ if (mode == 1) {
printf("scanning bus for devices...\n");
}
- for(i=0;i<CONFIG_SYS_SCSI_MAX_DEVICE;i++) {
- scsi_dev_desc[i].target=0xff;
- scsi_dev_desc[i].lun=0xff;
- scsi_dev_desc[i].lba=0;
- scsi_dev_desc[i].blksz=0;
+ for(i = 0; i < CONFIG_SYS_SCSI_MAX_DEVICE ; i++) {
+ scsi_dev_desc[i].target = 0xff;
+ scsi_dev_desc[i].lun = 0xff;
+ scsi_dev_desc[i].lba = 0;
+ scsi_dev_desc[i].blksz = 0;
scsi_dev_desc[i].log2blksz =
LOG2_INVALID(typeof(scsi_dev_desc[i].log2blksz));
- scsi_dev_desc[i].type=DEV_TYPE_UNKNOWN;
- scsi_dev_desc[i].vendor[0]=0;
- scsi_dev_desc[i].product[0]=0;
- scsi_dev_desc[i].revision[0]=0;
+ scsi_dev_desc[i].type = DEV_TYPE_UNKNOWN;
+ scsi_dev_desc[i].vendor[0] = 0;
+ scsi_dev_desc[i].product[0] = 0;
+ scsi_dev_desc[i].revision[0] = 0;
scsi_dev_desc[i].removable = false;
- scsi_dev_desc[i].if_type=IF_TYPE_SCSI;
- scsi_dev_desc[i].dev=i;
- scsi_dev_desc[i].part_type=PART_TYPE_UNKNOWN;
- scsi_dev_desc[i].block_read=scsi_read;
+ scsi_dev_desc[i].if_type = IF_TYPE_SCSI;
+ scsi_dev_desc[i].dev = i;
+ scsi_dev_desc[i].part_type = PART_TYPE_UNKNOWN;
+ scsi_dev_desc[i].block_read = scsi_read;
scsi_dev_desc[i].block_write = scsi_write;
}
- scsi_max_devs=0;
- for(i=0;i<CONFIG_SYS_SCSI_MAX_SCSI_ID;i++) {
- pccb->target=i;
- for(lun=0;lun<CONFIG_SYS_SCSI_MAX_LUN;lun++) {
- pccb->lun=lun;
- pccb->pdata=(unsigned char *)&tempbuff;
- pccb->datalen=512;
+ scsi_max_devs = 0;
+ for(i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) {
+ pccb->target = i;
+ for(lun = 0; lun < CONFIG_SYS_SCSI_MAX_LUN; lun++) {
+ pccb->lun = lun;
+ pccb->pdata = (unsigned char *) &tempbuff;
+ pccb->datalen = 512;
scsi_setup_inquiry(pccb);
if (scsi_exec(pccb) != true) {
- if(pccb->contr_stat==SCSI_SEL_TIME_OUT) {
- debug ("Selection timeout ID %d\n",pccb->target);
- continue; /* selection timeout => assuming no device present */
+ /* selection timeout => no device present */
+ if (pccb->contr_stat == SCSI_SEL_TIME_OUT) {
+ debug ("Selection timeout ID %d\n",
+ pccb->target);
+ continue;
}
scsi_print_error(pccb);
continue;
}
- perq=tempbuff[0];
- modi=tempbuff[1];
- if((perq & 0x1f)==0x1f) {
+ perq = tempbuff[0];
+ modi = tempbuff[1];
+ if ((perq & 0x1f) == 0x1f) {
continue; /* skip unknown devices */
}
- if((modi&0x80)==0x80) /* drive is removable */
- scsi_dev_desc[scsi_max_devs].removable=true;
+ if((modi & 0x80) == 0x80) /* drive is removable */
+ scsi_dev_desc[scsi_max_devs].removable = true;
/* get info for this device */
- scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].vendor[0],
+ scsi_ident_cpy((unsigned char *)
+ &scsi_dev_desc[scsi_max_devs].vendor[0],
&tempbuff[8], 8);
- scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].product[0],
+ scsi_ident_cpy((unsigned char *)
+ &scsi_dev_desc[scsi_max_devs].product[0],
&tempbuff[16], 16);
- scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].revision[0],
+ scsi_ident_cpy((unsigned char *)
+ &scsi_dev_desc[scsi_max_devs].revision[0],
&tempbuff[32], 4);
- scsi_dev_desc[scsi_max_devs].target=pccb->target;
- scsi_dev_desc[scsi_max_devs].lun=pccb->lun;
+ scsi_dev_desc[scsi_max_devs].target = pccb->target;
+ scsi_dev_desc[scsi_max_devs].lun = pccb->lun;
- pccb->datalen=0;
+ pccb->datalen = 0;
scsi_setup_test_unit_ready(pccb);
if (scsi_exec(pccb) != true) {
if (scsi_dev_desc[scsi_max_devs].removable == true) {
- scsi_dev_desc[scsi_max_devs].type=perq;
+ scsi_dev_desc[scsi_max_devs].type = perq;
goto removable;
}
scsi_print_error(pccb);
@@ -148,22 +153,22 @@ void scsi_scan(int mode)
scsi_print_error(pccb);
continue;
}
- scsi_dev_desc[scsi_max_devs].lba=capacity;
- scsi_dev_desc[scsi_max_devs].blksz=blksz;
+ scsi_dev_desc[scsi_max_devs].lba = capacity;
+ scsi_dev_desc[scsi_max_devs].blksz = blksz;
scsi_dev_desc[scsi_max_devs].log2blksz =
LOG2(scsi_dev_desc[scsi_max_devs].blksz);
scsi_dev_desc[scsi_max_devs].type=perq;
init_part(&scsi_dev_desc[scsi_max_devs]);
removable:
- if(mode==1) {
- printf (" Device %d: ", scsi_max_devs);
+ if (mode == 1) {
+ printf(" Device %d: ", scsi_max_devs);
dev_print(&scsi_dev_desc[scsi_max_devs]);
} /* if mode */
scsi_max_devs++;
} /* next LUN */
}
- if(scsi_max_devs>0)
- scsi_curr_dev=0;
+ if (scsi_max_devs > 0)
+ scsi_curr_dev = 0;
else
scsi_curr_dev = -1;
@@ -245,114 +250,118 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
return CMD_RET_USAGE;
case 2:
- if (strncmp(argv[1],"res",3) == 0) {
- printf("\nReset SCSI\n");
- scsi_bus_reset();
- scsi_scan(1);
- return 0;
+ if (strncmp(argv[1], "res", 3) == 0) {
+ printf("\nReset SCSI\n");
+ scsi_bus_reset();
+ scsi_scan(1);
+ return 0;
+ }
+ if (strncmp(argv[1], "inf", 3) == 0) {
+ int i;
+ for (i=0; i < CONFIG_SYS_SCSI_MAX_DEVICE; ++i) {
+ if (scsi_dev_desc[i].type == DEV_TYPE_UNKNOWN)
+ continue; /* list only known devices */
+ printf("SCSI dev. %d: ", i);
+ dev_print(&scsi_dev_desc[i]);
}
- if (strncmp(argv[1],"inf",3) == 0) {
- int i;
- for (i=0; i<CONFIG_SYS_SCSI_MAX_DEVICE; ++i) {
- if(scsi_dev_desc[i].type==DEV_TYPE_UNKNOWN)
- continue; /* list only known devices */
- printf ("SCSI dev. %d: ", i);
- dev_print(&scsi_dev_desc[i]);
- }
- return 0;
+ return 0;
+ }
+ if (strncmp(argv[1], "dev", 3) == 0) {
+ if ((scsi_curr_dev < 0) ||
+ (scsi_curr_dev >= CONFIG_SYS_SCSI_MAX_DEVICE)) {
+ printf("\nno SCSI devices available\n");
+ return 1;
}
- if (strncmp(argv[1],"dev",3) == 0) {
- if ((scsi_curr_dev < 0) || (scsi_curr_dev >= CONFIG_SYS_SCSI_MAX_DEVICE)) {
- printf("\nno SCSI devices available\n");
- return 1;
+ printf("\n Device %d: ", scsi_curr_dev);
+ dev_print(&scsi_dev_desc[scsi_curr_dev]);
+ return 0;
+ }
+ if (strncmp(argv[1], "scan", 4) == 0) {
+ scsi_scan(1);
+ return 0;
+ }
+ if (strncmp(argv[1], "part", 4) == 0) {
+ int dev, ok;
+ for (ok = 0, dev = 0;
+ dev< CONFIG_SYS_SCSI_MAX_DEVICE; ++dev) {
+ if (scsi_dev_desc[dev].type !=
+ DEV_TYPE_UNKNOWN) {
+ ok++;
+ if (dev)
+ printf("\n");
+ debug("print_part of %x\n",dev);
+ print_part(&scsi_dev_desc[dev]);
}
- printf ("\n Device %d: ", scsi_curr_dev);
- dev_print(&scsi_dev_desc[scsi_curr_dev]);
- return 0;
- }
- if (strncmp(argv[1],"scan",4) == 0) {
- scsi_scan(1);
- return 0;
}
- if (strncmp(argv[1],"part",4) == 0) {
- int dev, ok;
- for (ok=0, dev=0; dev<CONFIG_SYS_SCSI_MAX_DEVICE; ++dev) {
- if (scsi_dev_desc[dev].type!=DEV_TYPE_UNKNOWN) {
- ok++;
- if (dev)
- printf("\n");
- debug ("print_part of %x\n",dev);
- print_part(&scsi_dev_desc[dev]);
- }
- }
- if (!ok)
- printf("\nno SCSI devices available\n");
+ if (!ok)
+ printf("\nno SCSI devices available\n");
return 1;
}
return CMD_RET_USAGE;
case 3:
- if (strncmp(argv[1],"dev",3) == 0) {
- int dev = (int)simple_strtoul(argv[2], NULL, 10);
- printf ("\nSCSI device %d: ", dev);
- if (dev >= CONFIG_SYS_SCSI_MAX_DEVICE) {
- printf("unknown device\n");
- return 1;
- }
- printf ("\n Device %d: ", dev);
- dev_print(&scsi_dev_desc[dev]);
- if(scsi_dev_desc[dev].type == DEV_TYPE_UNKNOWN) {
- return 1;
- }
- scsi_curr_dev = dev;
- printf("... is now current device\n");
- return 0;
+ if (strncmp(argv[1], "dev", 3) == 0) {
+ int dev = (int) simple_strtoul(argv[2], NULL, 10);
+ printf ("\nSCSI device %d: ", dev);
+ if (dev >= CONFIG_SYS_SCSI_MAX_DEVICE) {
+ printf("unknown device\n");
+ return 1;
}
- if (strncmp(argv[1],"part",4) == 0) {
- int dev = (int)simple_strtoul(argv[2], NULL, 10);
- if(scsi_dev_desc[dev].type != DEV_TYPE_UNKNOWN) {
- print_part(&scsi_dev_desc[dev]);
- }
- else {
- printf ("\nSCSI device %d not available\n", dev);
- }
+ printf("\n Device %d: ", dev);
+ dev_print(&scsi_dev_desc[dev]);
+ if (scsi_dev_desc[dev].type == DEV_TYPE_UNKNOWN) {
return 1;
}
- return CMD_RET_USAGE;
- default:
- /* at least 4 args */
- if (strcmp(argv[1],"read") == 0) {
- ulong addr = simple_strtoul(argv[2], NULL, 16);
- ulong blk = simple_strtoul(argv[3], NULL, 16);
- ulong cnt = simple_strtoul(argv[4], NULL, 16);
- ulong n;
- printf ("\nSCSI read: device %d block # %ld, count %ld ... ",
- scsi_curr_dev, blk, cnt);
- n = scsi_read(scsi_curr_dev, blk, cnt, (ulong *)addr);
- printf ("%ld blocks read: %s\n",n,(n==cnt) ? "OK" : "ERROR");
- return 0;
- } else if (strcmp(argv[1], "write") == 0) {
- ulong addr = simple_strtoul(argv[2], NULL, 16);
- ulong blk = simple_strtoul(argv[3], NULL, 16);
- ulong cnt = simple_strtoul(argv[4], NULL, 16);
- ulong n;
- printf("\nSCSI write: device %d block # %ld, "
- "count %ld ... ",
- scsi_curr_dev, blk, cnt);
- n = scsi_write(scsi_curr_dev, blk, cnt,
- (ulong *)addr);
- printf("%ld blocks written: %s\n", n,
- (n == cnt) ? "OK" : "ERROR");
- return 0;
+ scsi_curr_dev = dev;
+ printf("... is now current device\n");
+ return 0;
+ }
+ if (strncmp(argv[1], "part", 4) == 0) {
+ int dev = (int) simple_strtoul(argv[2], NULL, 10);
+ if(scsi_dev_desc[dev].type != DEV_TYPE_UNKNOWN) {
+ print_part(&scsi_dev_desc[dev]);
+ } else {
+ printf("\nSCSI device %d not available\n", dev);
}
+ return 1;
+ }
+ return CMD_RET_USAGE;
+ default:
+ /* at least 4 args */
+ if (strcmp(argv[1],"read") == 0) {
+ ulong addr = simple_strtoul(argv[2], NULL, 16);
+ ulong blk = simple_strtoul(argv[3], NULL, 16);
+ ulong cnt = simple_strtoul(argv[4], NULL, 16);
+ ulong n;
+ printf ("\nSCSI read: device %d block # %ld, count %ld ... ",
+ scsi_curr_dev, blk, cnt);
+ n = scsi_read(scsi_curr_dev, blk, cnt, (ulong *)addr);
+ printf ("%ld blocks read: %s\n", n,
+ (n == cnt) ? "OK" : "ERROR");
+ return 0;
+ } else if (strcmp(argv[1], "write") == 0) {
+ ulong addr = simple_strtoul(argv[2], NULL, 16);
+ ulong blk = simple_strtoul(argv[3], NULL, 16);
+ ulong cnt = simple_strtoul(argv[4], NULL, 16);
+ ulong n;
+ printf("\nSCSI write: device %d block # %ld, "
+ "count %ld ... ",
+ scsi_curr_dev, blk, cnt);
+ n = scsi_write(scsi_curr_dev, blk, cnt,
+ (ulong *)addr);
+ printf("%ld blocks written: %s\n", n,
+ (n == cnt) ? "OK" : "ERROR");
+ return 0;
+ }
} /* switch */
return CMD_RET_USAGE;
}
-/****************************************************************************************
+/*****************************************************************************
* scsi_read
*/
-#define SCSI_MAX_READ_BLK 0xFFFF /* almost the maximum amount of the scsi_ext command.. */
+/* almost the maximum amount of the scsi_ext command.. */
+#define SCSI_MAX_READ_BLK 0xFFFF
static ulong scsi_read(int device, lbaint_t blknr, lbaint_t blkcnt,
void *buffer)
@@ -360,47 +369,47 @@ static ulong scsi_read(int device, lbaint_t blknr, lbaint_t blkcnt,
lbaint_t start, blks;
uintptr_t buf_addr;
unsigned short smallblks;
- ccb* pccb=(ccb *)&tempccb;
- device&=0xff;
+ ccb* pccb = (ccb *) &tempccb;
+ device &= 0xff;
/* Setup device
*/
- pccb->target=scsi_dev_desc[device].target;
- pccb->lun=scsi_dev_desc[device].lun;
- buf_addr=(unsigned long)buffer;
- start=blknr;
- blks=blkcnt;
+ pccb->target = scsi_dev_desc[device].target;
+ pccb->lun = scsi_dev_desc[device].lun;
+ buf_addr = (unsigned long) buffer;
+ start = blknr;
+ blks = blkcnt;
debug("\nscsi_read: dev %d startblk " LBAF
", blccnt " LBAF " buffer %lx\n",
- device, start, blks, (unsigned long)buffer);
+ device, start, blks, (unsigned long) buffer);
do {
- pccb->pdata=(unsigned char *)buf_addr;
- if(blks>SCSI_MAX_READ_BLK) {
- pccb->datalen=scsi_dev_desc[device].blksz * SCSI_MAX_READ_BLK;
- smallblks=SCSI_MAX_READ_BLK;
- scsi_setup_read_ext(pccb,start,smallblks);
- start+=SCSI_MAX_READ_BLK;
- blks-=SCSI_MAX_READ_BLK;
- }
- else {
- pccb->datalen=scsi_dev_desc[device].blksz * blks;
- smallblks=(unsigned short) blks;
- scsi_setup_read_ext(pccb,start,smallblks);
- start+=blks;
- blks=0;
+ pccb->pdata = (unsigned char *) buf_addr;
+ if (blks > SCSI_MAX_READ_BLK) {
+ pccb->datalen = scsi_dev_desc[device].blksz *
+ SCSI_MAX_READ_BLK;
+ smallblks = SCSI_MAX_READ_BLK;
+ scsi_setup_read_ext(pccb, start, smallblks);
+ start += SCSI_MAX_READ_BLK;
+ blks -= SCSI_MAX_READ_BLK;
+ } else {
+ pccb->datalen = scsi_dev_desc[device].blksz * blks;
+ smallblks = (unsigned short) blks;
+ scsi_setup_read_ext(pccb, start, smallblks);
+ start += blks;
+ blks = 0;
}
debug("scsi_read_ext: startblk " LBAF
", blccnt %x buffer %lx\n",
start, smallblks, buf_addr);
if (scsi_exec(pccb) != true) {
scsi_print_error(pccb);
- blkcnt-=blks;
+ blkcnt -= blks;
break;
}
- buf_addr+=pccb->datalen;
- } while(blks!=0);
+ buf_addr += pccb->datalen;
+ } while (blks != 0);
debug("scsi_read_ext: end startblk " LBAF
", blccnt %x buffer %lx\n", start, smallblks, buf_addr);
- return(blkcnt);
+ return (blkcnt);
}
/*******************************************************************************
@@ -464,22 +473,22 @@ void scsi_ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len)
{
int start,end;
- start=0;
- while(start<len) {
- if(src[start]!=' ')
+ start = 0;
+ while (start < len) {
+ if (src[start] != ' ')
break;
start++;
}
- end=len-1;
- while(end>start) {
- if(src[end]!=' ')
+ end = len - 1;
+ while (end > start) {
+ if (src[end] != ' ')
break;
end--;
}
- for( ; start<=end; start++) {
- *dest++=src[start];
+ for( ; start <= end; start++) {
+ *dest++ = src[start];
}
- *dest='\0';
+ *dest = '\0';
}
@@ -511,17 +520,17 @@ int scsi_read_capacity(ccb *pccb, lbaint_t *capacity, unsigned long *blksz)
if (scsi_exec(pccb) != true)
return 1;
- *capacity = ((lbaint_t)pccb->pdata[0] << 24) |
- ((lbaint_t)pccb->pdata[1] << 16) |
- ((lbaint_t)pccb->pdata[2] << 8) |
- ((lbaint_t)pccb->pdata[3]);
+ *capacity = ((lbaint_t) pccb->pdata[0] << 24) |
+ ((lbaint_t) pccb->pdata[1] << 16) |
+ ((lbaint_t) pccb->pdata[2] << 8) |
+ ((lbaint_t) pccb->pdata[3]);
if (*capacity != 0xffffffff) {
/* Read capacity (10) was sufficient for this drive. */
- *blksz = ((unsigned long)pccb->pdata[4] << 24) |
- ((unsigned long)pccb->pdata[5] << 16) |
- ((unsigned long)pccb->pdata[6] << 8) |
- ((unsigned long)pccb->pdata[7]);
+ *blksz = ((unsigned long) pccb->pdata[4] << 24) |
+ ((unsigned long) pccb->pdata[5] << 16) |
+ ((unsigned long) pccb->pdata[6] << 8) |
+ ((unsigned long) pccb->pdata[7]);
return 0;
}
@@ -537,23 +546,23 @@ int scsi_read_capacity(ccb *pccb, lbaint_t *capacity, unsigned long *blksz)
if (scsi_exec(pccb) != true)
return 1;
- *capacity = ((uint64_t)pccb->pdata[0] << 56) |
- ((uint64_t)pccb->pdata[1] << 48) |
- ((uint64_t)pccb->pdata[2] << 40) |
- ((uint64_t)pccb->pdata[3] << 32) |
- ((uint64_t)pccb->pdata[4] << 24) |
- ((uint64_t)pccb->pdata[5] << 16) |
- ((uint64_t)pccb->pdata[6] << 8) |
- ((uint64_t)pccb->pdata[7]);
-
- *blksz = ((uint64_t)pccb->pdata[8] << 56) |
- ((uint64_t)pccb->pdata[9] << 48) |
- ((uint64_t)pccb->pdata[10] << 40) |
- ((uint64_t)pccb->pdata[11] << 32) |
- ((uint64_t)pccb->pdata[12] << 24) |
- ((uint64_t)pccb->pdata[13] << 16) |
- ((uint64_t)pccb->pdata[14] << 8) |
- ((uint64_t)pccb->pdata[15]);
+ *capacity = ((uint64_t) pccb->pdata[0] << 56) |
+ ((uint64_t) pccb->pdata[1] << 48) |
+ ((uint64_t) pccb->pdata[2] << 40) |
+ ((uint64_t) pccb->pdata[3] << 32) |
+ ((uint64_t) pccb->pdata[4] << 24) |
+ ((uint64_t) pccb->pdata[5] << 16) |
+ ((uint64_t) pccb->pdata[6] << 8) |
+ ((uint64_t) pccb->pdata[7]);
+
+ *blksz = ((uint64_t) pccb->pdata[8] << 56) |
+ ((uint64_t) pccb->pdata[9] << 48) |
+ ((uint64_t) pccb->pdata[10] << 40) |
+ ((uint64_t) pccb->pdata[11] << 32) |
+ ((uint64_t) pccb->pdata[12] << 24) |
+ ((uint64_t) pccb->pdata[13] << 16) |
+ ((uint64_t) pccb->pdata[14] << 8) |
+ ((uint64_t) pccb->pdata[15]);
return 0;
}
@@ -564,51 +573,53 @@ int scsi_read_capacity(ccb *pccb, lbaint_t *capacity, unsigned long *blksz)
*/
void scsi_setup_test_unit_ready(ccb * pccb)
{
- pccb->cmd[0]=SCSI_TST_U_RDY;
- pccb->cmd[1]=pccb->lun<<5;
- pccb->cmd[2]=0;
- pccb->cmd[3]=0;
- pccb->cmd[4]=0;
- pccb->cmd[5]=0;
- pccb->cmdlen=6;
- pccb->msgout[0]=SCSI_IDENTIFY; /* NOT USED */
+ pccb->cmd[0] = SCSI_TST_U_RDY;
+ pccb->cmd[1] = pccb->lun << 5;
+ pccb->cmd[2] = 0;
+ pccb->cmd[3] = 0;
+ pccb->cmd[4] = 0;
+ pccb->cmd[5] = 0;
+ pccb->cmdlen = 6;
+ pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
}
void scsi_setup_read_ext(ccb * pccb, unsigned long start, unsigned short blocks)
{
- pccb->cmd[0]=SCSI_READ10;
- pccb->cmd[1]=pccb->lun<<5;
- pccb->cmd[2]=((unsigned char) (start>>24))&0xff;
- pccb->cmd[3]=((unsigned char) (start>>16))&0xff;
- pccb->cmd[4]=((unsigned char) (start>>8))&0xff;
- pccb->cmd[5]=((unsigned char) (start))&0xff;
- pccb->cmd[6]=0;
- pccb->cmd[7]=((unsigned char) (blocks>>8))&0xff;
- pccb->cmd[8]=(unsigned char) blocks & 0xff;
- pccb->cmd[6]=0;
- pccb->cmdlen=10;
- pccb->msgout[0]=SCSI_IDENTIFY; /* NOT USED */
- debug ("scsi_setup_read_ext: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n",
- pccb->cmd[0],pccb->cmd[1],
- pccb->cmd[2],pccb->cmd[3],pccb->cmd[4],pccb->cmd[5],
- pccb->cmd[7],pccb->cmd[8]);
+ pccb->cmd[0] = SCSI_READ10;
+ pccb->cmd[1] = pccb->lun << 5;
+ pccb->cmd[2] = ((unsigned char) (start >> 24)) & 0xff;
+ pccb->cmd[3] = ((unsigned char) (start >> 16)) & 0xff;
+ pccb->cmd[4] = ((unsigned char) (start >> 8)) & 0xff;
+ pccb->cmd[5] = ((unsigned char) (start)) & 0xff;
+ pccb->cmd[6] = 0;
+ pccb->cmd[7] = ((unsigned char) (blocks >> 8)) & 0xff;
+ pccb->cmd[8] = (unsigned char) blocks & 0xff;
+ pccb->cmd[6] = 0;
+ pccb->cmdlen = 10;
+ pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
+ debug ("scsi_setup_read_ext: cmd: %02X %02X "
+ "startblk %02X%02X%02X%02X blccnt %02X%02X\n",
+ pccb->cmd[0], pccb->cmd[1],
+ pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5],
+ pccb->cmd[7], pccb->cmd[8]);
}
void scsi_setup_write_ext(ccb *pccb, unsigned long start, unsigned short blocks)
{
pccb->cmd[0] = SCSI_WRITE10;
pccb->cmd[1] = pccb->lun << 5;
- pccb->cmd[2] = ((unsigned char) (start>>24)) & 0xff;
- pccb->cmd[3] = ((unsigned char) (start>>16)) & 0xff;
- pccb->cmd[4] = ((unsigned char) (start>>8)) & 0xff;
+ pccb->cmd[2] = ((unsigned char) (start >> 24)) & 0xff;
+ pccb->cmd[3] = ((unsigned char) (start >> 16)) & 0xff;
+ pccb->cmd[4] = ((unsigned char) (start >> 8)) & 0xff;
pccb->cmd[5] = ((unsigned char) (start)) & 0xff;
pccb->cmd[6] = 0;
- pccb->cmd[7] = ((unsigned char) (blocks>>8)) & 0xff;
- pccb->cmd[8] = (unsigned char)blocks & 0xff;
+ pccb->cmd[7] = ((unsigned char) (blocks >> 8)) & 0xff;
+ pccb->cmd[8] = (unsigned char) blocks & 0xff;
pccb->cmd[9] = 0;
pccb->cmdlen = 10;
pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
- debug("%s: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n",
+ debug("%s: cmd: %02X %02X startblk %02X%02X%02X%02X i"
+ " blccnt %02X%02X\n",
__func__,
pccb->cmd[0], pccb->cmd[1],
pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5],
@@ -617,33 +628,34 @@ void scsi_setup_write_ext(ccb *pccb, unsigned long start, unsigned short blocks)
void scsi_setup_read6(ccb * pccb, unsigned long start, unsigned short blocks)
{
- pccb->cmd[0]=SCSI_READ6;
- pccb->cmd[1]=pccb->lun<<5 | (((unsigned char)(start>>16))&0x1f);
- pccb->cmd[2]=((unsigned char) (start>>8))&0xff;
- pccb->cmd[3]=((unsigned char) (start))&0xff;
- pccb->cmd[4]=(unsigned char) blocks & 0xff;
- pccb->cmd[5]=0;
- pccb->cmdlen=6;
- pccb->msgout[0]=SCSI_IDENTIFY; /* NOT USED */
- debug ("scsi_setup_read6: cmd: %02X %02X startblk %02X%02X blccnt %02X\n",
- pccb->cmd[0],pccb->cmd[1],
- pccb->cmd[2],pccb->cmd[3],pccb->cmd[4]);
+ pccb->cmd[0] = SCSI_READ6;
+ pccb->cmd[1] = pccb->lun << 5 | (((unsigned char)(start >> 16)) & 0x1f);
+ pccb->cmd[2] = ((unsigned char) (start >> 8)) & 0xff;
+ pccb->cmd[3] = ((unsigned char) (start)) & 0xff;
+ pccb->cmd[4] = (unsigned char) blocks & 0xff;
+ pccb->cmd[5] = 0;
+ pccb->cmdlen = 6;
+ pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
+ debug ("scsi_setup_read6: cmd: %02X %02X "
+ "startblk %02X%02X blccnt %02X\n",
+ pccb->cmd[0], pccb->cmd[1],
+ pccb->cmd[2], pccb->cmd[3], pccb->cmd[4]);
}
void scsi_setup_inquiry(ccb * pccb)
{
- pccb->cmd[0]=SCSI_INQUIRY;
- pccb->cmd[1]=pccb->lun<<5;
- pccb->cmd[2]=0;
- pccb->cmd[3]=0;
- if(pccb->datalen>255)
- pccb->cmd[4]=255;
+ pccb->cmd[0] = SCSI_INQUIRY;
+ pccb->cmd[1] = pccb->lun << 5;
+ pccb->cmd[2] = 0;
+ pccb->cmd[3] = 0;
+ if(pccb->datalen > 255)
+ pccb->cmd[4] = 255;
else
- pccb->cmd[4]=(unsigned char)pccb->datalen;
- pccb->cmd[5]=0;
- pccb->cmdlen=6;
- pccb->msgout[0]=SCSI_IDENTIFY; /* NOT USED */
+ pccb->cmd[4] = (unsigned char) pccb->datalen;
+ pccb->cmd[5] = 0;
+ pccb->cmdlen = 6;
+ pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
}
--
1.8.1.2
More information about the U-Boot
mailing list