[U-Boot] [PATCH v2 1/2] mx6sabresd: Avoid hang when HDMI cable is not connected

[Stefano Babic]

On 11/09/2013 23:14, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
> 
> Since commit d9b894603 (mx6sabresd: Add LVDS splash screen support) the
> following hang happens if the HDMI cable is not connected or the 'panel'
> variable is not set:
> 
> U-Boot 2013.10-rc2-12978-g47ac53d-dirty (Sep 11 2013 - 15:07:38)               
>                                                                                
> CPU:   Freescale i.MX6Q rev1.2 at 792 MHz                                      
> Reset cause: POR                                                               
> Board: MX6-SabreSD                                                             
> DRAM:  1 GiB                                                                   
> MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
> ...
> 
> Provide a check to 'dev->detect' in order to prevent the hang.
> 
> Reported-by: Pardeep Kumar Singla <b45784 at freescale.com>
> Suggested-by: Eric Bénard <eric at eukrea.com>
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---

Applied to u-boot-imx, thanks!

Best regards,
Stefano Babic



-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================