August 2014 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Fri Aug 1 00:03:52 CEST 2014
Ending: Sun Aug 31 23:31:32 CEST 2014
Messages: 2637

• [U-Boot] uboot halts when stdio configured for netconsole and network cable disconnected   Les Loveridge (INT)
• [U-Boot] Please pull u-boot-sunxi.git/master   Albert ARIBAUD
• [U-Boot] Please pull u-boot-sunxi.git/master   Albert ARIBAUD
• [U-Boot] [PATCH 3/6] arm: uniphier: add UniPhier SoC suppurt code   Albert ARIBAUD
• [U-Boot] [PATCH v1] arm: include config.h in vectors.S   Albert ARIBAUD
• [U-Boot] [PATCH v2 06/15] kirkwood: kconfig: refactor Kconfig and defconfig   Albert ARIBAUD
• [U-Boot] U-boot for Banana Pi   TooMeeK Admin
• [U-Boot] U-boot for Banana Pi   TooMeeK Admin
• [U-Boot] U-boot for Banana Pi   TooMeeK Admin
• [U-Boot] U-boot for Banana Pi   TooMeeK Admin
• [U-Boot] [PATCH] ARM: tegra: add Colibri T30 board support   Stefan Agner
• [U-Boot] [PATCH] ARM: tegra: add Colibri T30 board support   Stefan Agner
• [U-Boot] [PATCH] ARM: tegra: add Colibri T30 board support   Stefan Agner
• [U-Boot] [PATCH] ARM: tegra: add Colibri T30 board support   Stefan Agner
• [U-Boot] [PATCH v2] ARM: tegra: add Colibri T30 board support   Stefan Agner
• [U-Boot] [PATCH 0/4] arm: vf610: add NAND flash support   Stefan Agner
• [U-Boot] [PATCH 1/4] arm: vf610: add NFC pin mux   Stefan Agner
• [U-Boot] [PATCH 2/4] arm: vf610: add NFC clock support   Stefan Agner
• [U-Boot] [PATCH 3/4] mtd: nand: add Freescale NFC driver   Stefan Agner
• [U-Boot] [PATCH 4/4] arm: vf610: add NAND support for vf610twr   Stefan Agner
• [U-Boot] [PATCH 3/4] mtd: nand: add Freescale NFC driver   Stefan Agner
• [U-Boot] [PATCH 3/4] mtd: nand: add Freescale NFC driver   Stefan Agner
• [U-Boot] [PATCH 3/4] mtd: nand: add Freescale NFC driver   Stefan Agner
• [U-Boot] [PATCH 3/4] mtd: nand: add Freescale NFC driver   Stefan Agner
• [U-Boot] [PATCH v2 0/4] arm: vf610: add NAND flash support   Stefan Agner
• [U-Boot] [PATCH v2 1/4] arm: vf610: add NFC pin mux   Stefan Agner
• [U-Boot] [PATCH v2 2/4] arm: vf610: add NFC clock support   Stefan Agner
• [U-Boot] [PATCH v2 3/4] mtd: nand: add Freescale NFC driver   Stefan Agner
• [U-Boot] [PATCH v2 4/4] arm: vf610: add NAND support for vf610twr   Stefan Agner
• [U-Boot] [PATCH] vf610twr: Tune DDR initialization settings   Stefan Agner
• [U-Boot] [PATCH v2 3/4] mtd: nand: add Freescale NFC driver   Stefan Agner
• [U-Boot] [PATCH v3 0/4] arm: vf610: add NAND flash support   Stefan Agner
• [U-Boot] [PATCH v3 1/4] arm: vf610: add NFC pin mux   Stefan Agner
• [U-Boot] [PATCH v3 2/4] arm: vf610: add NFC clock support   Stefan Agner
• [U-Boot] [PATCH v3 3/4] mtd: nand: add Freescale vf610_nfc driver   Stefan Agner
• [U-Boot] [PATCH v3 4/4] arm: vf610: add NAND support for vf610twr   Stefan Agner
• [U-Boot] [PATCH 1/2] arm: vf610: lpuart: fix status register handling   Stefan Agner
• [U-Boot] [PATCH 2/2] arm: vf610: lpuart: disable FIFO on initializaton   Stefan Agner
• [U-Boot] [PATCH v2 3/4] mtd: nand: add Freescale NFC driver   Stefan Agner
• [U-Boot] Newbies list?   David Aldrich
• [U-Boot] unlock NVRAM for writing from within U-boot shell   Alex
• [U-Boot] U boot with imx-usb-loader   DELOVE Alexandre
• [U-Boot] [PATCH v2 09/10] arm: ls102xa: Add basic support for LS1021AQDS board   AlisonWang
• [U-Boot] [PATCH v2 04/10] arm: ls102xa: Add etsec support for LS102xA   AlisonWang
• [U-Boot] [PATCH v2 05/10] arm: ls102xa: Add esdhc support for LS102xA   AlisonWang
• [U-Boot] [PATCH v2 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS/TWR board support   AlisonWang
• [U-Boot] [PATCH v4 04/18] net: mdio: Add private MDIO read/write function   AlisonWang
• [U-Boot] [PATCH v4 02/18] ls102xa: i2c: Add i2c support for LS102xA   AlisonWang
• [U-Boot] [PATCH v4 16/18] video: dcu: Add Sii9022A HDMI Transmitter support   AlisonWang
• [U-Boot] [PATCH v4 15/18] arm: ls102xa: Add LETECH support for LS1021AQDS/TWR board   AlisonWang
• [U-Boot] [PATCH v5 01/16] arm: ls102xa: Add Freescale LS102xA SoC support   AlisonWang
• [U-Boot] uboot env in mmc partition   Naitik Amin
• [U-Boot] uboot env in mmc partition   Naitik Amin
• [U-Boot] [PATCH v7 1/1] ARM: kirkwood: add mvsdio driver   Pantelis Antoniou
• [U-Boot] [RESEND PATCH v2] bcm2835_sdhci: Add SDHCI_QUIRK_NO_HISPD_BIT flag   Pantelis Antoniou
• [U-Boot] [PATCH 11/12] mmc: s3c: Add SD driver   Pantelis Antoniou
• [U-Boot] [PATCH 11/12] mmc: s3c: Add SD driver   Pantelis Antoniou
• [U-Boot] [PATCH] mmc/dw_mmc: Fix clock divider calculation error for bypass mode   Pantelis Antoniou
• [U-Boot] [PATCH 1/3] MMC: atmel_mci: refactor setting the mode register   Pantelis Antoniou
• [U-Boot] [PATCH 2/3] MMC: atmel_mci: add configuration register definition   Pantelis Antoniou
• [U-Boot] [PATCH 3/3] MMC: atmel_mci: enable high speed mode support   Pantelis Antoniou
• [U-Boot] [PATCH 1/2] env_mmc: add mmc_get_env_addr() prototype   Pantelis Antoniou
• [U-Boot] [PATCH v2 2/2] env_mmc: support env partition setup in runtime   Pantelis Antoniou
• [U-Boot] Pull request: u-boot-mmc 1/08/2014   Pantelis Antoniou
• [U-Boot] [PATCH v3 2/4] usb/gadget: fastboot: add eMMC support for flash command   Pantelis Antoniou
• [U-Boot] Newbies list?   Jonathan Ben Avraham
• [U-Boot] Newbies list?   Jonathan Ben Avraham
• [U-Boot] [PATCH] drivers: rtc: remove dead drivers   Stefano Babic
• [U-Boot] [PATCH 1/5] mx6: imx-regs: Remove unused 'omux' field from iomux struct   Stefano Babic
• [U-Boot] [PATCH 09/18] arm: mx6: ddr: do not write into reserved bit   Stefano Babic
• [U-Boot] [PATCH] drivers: rtc: remove dead drivers   Stefano Babic
• [U-Boot] [PATCH 1/5] mx6: imx-regs: Remove unused 'omux' field from iomux struct   Stefano Babic
• [U-Boot] [PATCH 2/5] mx6: crm_regs: Fix CDCDR_SPDIF0_CLK_PODF mask and offset   Stefano Babic
• [U-Boot] [PATCH 3/5] mx6: crm_regs: Fix MXC_CCM_CLPCR_WB_PER_AT_LPM definition   Stefano Babic
• [U-Boot] [PATCH 4/5] mx6: crm_regs: Fix MXC_CCM_CIMR_MASK_PERIPH2_CLK_SEL_LOADED   Stefano Babic
• [U-Boot] [PATCH 5/5] pmic: pmic_pfuze100: Use a shorter name for PMIC name   Stefano Babic
• [U-Boot] [PATCH] i.MX31 PDK: Enable generic board for i.MX31 PDK   Stefano Babic
• [U-Boot] [PATCH] arm: m53evk: Fix RTC bus number   Stefano Babic
• [U-Boot] [PATCH] Update aristainetos board to Kconfig   Stefano Babic
• [U-Boot] Fix for Kconfig buildsystem   Stefano Babic
• [U-Boot] [PATCH] mx31pdk: Change maintainer   Stefano Babic
• [U-Boot] [PATCH] embest/mx6boards: only toggle eMMC usdhc3 RST line on MarSboard   Stefano Babic
• [U-Boot] [PATCH 02/11] imx: ventana: added cputype env var   Stefano Babic
• [U-Boot] [PATCH] imximage: Fix imximage IVT bug for EIM-NOR boot   Stefano Babic
• [U-Boot] [PATCH] iMX6: Disable the L2 before chaning the PL310 latency   Stefano Babic
• [U-Boot] [PATCH] mx31pdk: Change maintainer   Stefano Babic
• [U-Boot] [PATCH 1/4] ARM: mx5: Fix CHSCCDR name   Stefano Babic
• [U-Boot] [PATCH 2/4] ARM: mx6: Prevent overflow in DRAM size detection   Stefano Babic
• [U-Boot] [PATCH 3/4] ARM: mx6: Handle the MMDCx_MDCTL COL field caprices   Stefano Babic
• [U-Boot] [PATCH 4/4] ARM: mx6: Enable Thumb build for SPL   Stefano Babic
• [U-Boot] [PATCH v2] mxs: fixed battery boot on imx233-olinuxino-micro   Stefano Babic
• [U-Boot] [PATCH] pci: mx6: fix occasional link failures   Stefano Babic
• [U-Boot] [PATCH] mx6sxsabresd: Update DDR initialization   Stefano Babic
• [U-Boot] [PATCH 02/11] imx: ventana: added cputype env var   Stefano Babic
• [U-Boot] [PATCH 01/11] imx: ventana: set dynamic env var for flash layout   Stefano Babic
• [U-Boot] [PATCH 03/11] imx: ventana: remove caam disable per eeprom bit   Stefano Babic
• [U-Boot] [PATCH 04/11] imx: ventana: add appropriate delay following GSC i2c write   Stefano Babic
• [U-Boot] [PATCH 06/11] imx: ventana: add video enable gpio pinmux for GW54xx   Stefano Babic
• [U-Boot] [PATCH 07/11] imx: ventana: add missing crlf to print   Stefano Babic
• [U-Boot] [PATCH 08/11] imx: ventana: configure i2c_dis# pin properly for gw53xx   Stefano Babic
• [U-Boot] [PATCH 09/11] imx: ventana: enable SION bit on gpio outputs   Stefano Babic
• [U-Boot] [PATCH 10/11] imx: ventana: add iomux for PCISKT_WDIS# gpio   Stefano Babic
• [U-Boot] [PATCH 11/11] imx: ventana: leave PCI reset de-asserted if PCI enabled   Stefano Babic
• [U-Boot] [PATCH 05/11] imx: ventana: add econfig command   Stefano Babic
• [U-Boot] [PATCH] mx6sxsabresd: Convert to the new Kconfig style   Stefano Babic
• [U-Boot] [PATCH 1/2] mx6sx: Adjust enable_fec_anatop_clock() for mx6solox   Stefano Babic
• [U-Boot] [PATCH 2/2] mx6sxsabresd: Add Ethernet support   Stefano Babic
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH v2 2/2] net: fec_mxc: Do not error out when FEC_TBD_READY   Stefano Babic
• [U-Boot] [PATCH v2 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Stefano Babic
• [U-Boot] MMU Mapping   Stefano Babic
• [U-Boot] [UBOOT RFC PATCH 02/13] usb: gadget: udc-core: Add minimal udc-core from linux kernel   Felipe Balbi
• [U-Boot] [UBOOT RFC PATCH 04/13] usb: dwc3: Add dwc3 driver   Felipe Balbi
• [U-Boot] [UBOOT RFC PATCH 07/13] usb: gadget: g_dnl: Explicitly set the max packet size in descriptor   Felipe Balbi
• [U-Boot] [UBOOT RFC PATCH 10/13] board: ti: DRA7: added USB initializtion code   Felipe Balbi
• [U-Boot] [UBOOT RFC PATCH 13/13] dwc3: core: Change the bounce buffer size to 4096   Felipe Balbi
• [U-Boot] [UBOOT RFC PATCH 02/13] usb: gadget: udc-core: Add minimal udc-core from linux kernel   Felipe Balbi
• [U-Boot] [UBOOT RFC PATCH 02/13] usb: gadget: udc-core: Add minimal udc-core from linux kernel   Felipe Balbi
• [U-Boot] [UBOOT RFC PATCH 07/13] usb: gadget: g_dnl: Explicitly set the max packet size in descriptor   Felipe Balbi
• [U-Boot] [UBOOT RFC PATCH 07/13] usb: gadget: g_dnl: Explicitly set the max packet size in descriptor   Felipe Balbi
• [U-Boot] [UBOOT RFC PATCH 07/13] usb: gadget: g_dnl: Explicitly set the max packet size in descriptor   Felipe Balbi
• [U-Boot] [UBOOT RFC PATCH 10/13] board: ti: DRA7: added USB initializtion code   Felipe Balbi
• [U-Boot] [UBOOT RFC PATCH 13/13] dwc3: core: Change the bounce buffer size to 4096   Felipe Balbi
• [U-Boot] [UBOOT RFC PATCH 07/13] usb: gadget: g_dnl: Explicitly set the max packet size in descriptor   Felipe Balbi
• [U-Boot] [UBOOT RFC PATCH 07/13] usb: gadget: g_dnl: Explicitly set the max packet size in descriptor   Felipe Balbi
• [U-Boot] [UBOOT RFC PATCH 13/13] dwc3: core: Change the bounce buffer size to 4096   Felipe Balbi
• [U-Boot] [PATCH] samsung: s5p_goni: fix: Add missing definitions for G_DNL_UMS gadget   Robert Baldyga
• [U-Boot] [build] conflict of include/image.h with /usr/include/image.h   Alon Bar-Lev
• [U-Boot] u-boot and AT91RM9200-EK based board   CJP Barlis
• [U-Boot] [PATCH] ARM: datacache always disabled when RAM extends to 0xFFFFFFFF   Jaccon Bastiaansen
• [U-Boot] Passing bootargs to arm64 kernel   Arnab Basu
• [U-Boot] [Patch v2 3/5] armv8/fsl-lsch3: Release secondary cores from boot hold off with Boot Page   Arnab Basu
• [U-Boot] [PATCH 0/8] PSCI v0.2 framework for ARMv8   Arnab Basu
• [U-Boot] [PATCH 1/8] ARM: PSCI: Update psci.h for psci v0.2   Arnab Basu
• [U-Boot] [PATCH 2/8] ARM: PSCI: Alow arch specific DT patching   Arnab Basu
• [U-Boot] [PATCH 3/8] ARMv8/fsl-lsch3: Refactor spin-table code   Arnab Basu
• [U-Boot] [PATCH 4/8] ARMv8: PSCI: Add linker section to hold PSCI code   Arnab Basu
• [U-Boot] [PATCH 5/8] ARMv8: PCSI: Add generic ARMv8 PSCI code   Arnab Basu
• [U-Boot] [PATCH 6/8] ARMv8: PSCI: Fixup the device tree for PSCI v0.2   Arnab Basu
• [U-Boot] [PATCH 7/8] ARMv8: PSCI: Setup ARMv8 PSCI   Arnab Basu
• [U-Boot] [PATCH 8/8] ARMv8: PSCI: Enable SMC   Arnab Basu
• [U-Boot] [PATCH 0/8] PSCI v0.2 framework for ARMv8   Arnab Basu
• [U-Boot] [PATCH 2/8] ARM: PSCI: Alow arch specific DT patching   Arnab Basu
• [U-Boot] [PATCH 6/8] ARMv8: PSCI: Fixup the device tree for PSCI v0.2   Arnab Basu
• [U-Boot] Pull request: u-boot-mmc 1/08/2014   Andreas Bießmann
• [U-Boot] Recommended AVR32 toolchain   Andreas Bießmann
• [U-Boot] [PATCH] ARM: atmel: sama5d3: add timings register   Andreas Bießmann
• [U-Boot] [PATCH] mtd: atmel-nand: use pmecc_readl(b)/pmecc_writel to access the pmecc register   Andreas Bießmann
• [U-Boot] [PATCH v2 1/2] ARM: atmel: sama5d3xek: add nor flash init function   Andreas Bießmann
• [U-Boot] DFU to MMC #1   Tamás Bondár
• [U-Boot] DFU to MMC #1   Tamás Bondár
• [U-Boot] Automatic firmware upgrade using USB DFU   Tamás Bondár
• [U-Boot] [RFC PATCH 0/1] SPL JTAG boot mode   Sören Brinkmann
• [U-Boot] [PATCH] axs101: Fix type mismatch warning   Alexey Brodkin
• [U-Boot] [PATCH] common: fix compiler warning on wrong printf format   Alexey Brodkin
• [U-Boot] Please pull u-boot-arc/master   Alexey Brodkin
• [U-Boot] [PATCH v2] axs101: Fix type mismatch warning   Alexey Brodkin
• [U-Boot] [PATCH] arc: Fix printf size_t format related warnings (again...)   Alexey Brodkin
• [U-Boot] [PATCH v2] common: fix compiler warning on wrong printf format   Alexey Brodkin
• [U-Boot] [PATCH v2] common: fix compiler warning on wrong printf format   Alexey Brodkin
• [U-Boot] [PATCH 1/2] arm/kirkwood/nand: allow forced disabling for subpage writes   Holger Brunck
• [U-Boot] [PATCH 2/2] arm/km: disable subpage write for km_kirkwood_pci and kmsuv31 target   Holger Brunck
• [U-Boot] Quick guide to Kconfig   Ian Campbell
• [U-Boot] [PATCH 1/7] sunxi-common.h: Remove CONFIG_SYS_BOOT_GET_CMDLINE   Ian Campbell
• [U-Boot] [PATCH 2/7] sunxi-common.h: Remove dead #ifdef CONFIG_CMD_NET code block   Ian Campbell
• [U-Boot] [PATCH 3/7] sunxi-common.h: Don't undefine CONFIG_CMD_NFS   Ian Campbell
• [U-Boot] [PATCH 4/7] sunxi-common.h: Don't undef CONFIG_CMD_NET only to redefine it again later   Ian Campbell
• [U-Boot] [PATCH 5/7] sunxi-common.h: Use new generic $bootcmd   Ian Campbell
• [U-Boot] [PATCH 6/7] sunxi: Kconfig: move common settings into a shared code block   Ian Campbell
• [U-Boot] [PATCH 7/7] sunxi: Add environment settings to make extlinux.conf booting work   Ian Campbell
• [U-Boot] [PATCH 7/7] sunxi: Add environment settings to make extlinux.conf booting work   Ian Campbell
• [U-Boot] [PATCH v2 02/16] sunxi: dram: Remove broken super-standby remnants   Ian Campbell
• [U-Boot] [PATCH v2 03/16] sunxi: dram: Respect the DDR3 reset timing requirements   Ian Campbell
• [U-Boot] [PATCH v2 04/16] sunxi: dram: Fix CKE delay handling for sun4i/sun5i   Ian Campbell
• [U-Boot] [PATCH v2 05/16] sunxi: dram: Remove broken impedance and ODT configuration code   Ian Campbell
• [U-Boot] [PATCH v2 06/16] sunxi: dram: Do DDR3 reset in the same way on sun4i/sun5i/sun7i   Ian Campbell
• [U-Boot] [PATCH v2 07/16] sunxi: dram: Add 'await_bits_clear'/'await_bits_set' helper functions   Ian Campbell
• [U-Boot] [PATCH v2 08/16] sunxi: dram: Re-introduce the impedance calibration ond ODT   Ian Campbell
• [U-Boot] [PATCH v2 09/16] sunxi: dram: Configurable MBUS clock speed (use PLL5 or PLL6)   Ian Campbell
• [U-Boot] [PATCH v2 12/16] sunxi: dram: Add a helper function 'mctl_get_number_of_lanes'   Ian Campbell
• [U-Boot] [PATCH v2 13/16] sunxi: dram: Configurable DQS gating window mode and delay   Ian Campbell
• [U-Boot] [PATCH v2 14/16] sunxi: dram: Drop DDR2 support and assume only single rank DDR3 memory   Ian Campbell
• [U-Boot] [PATCH v2 00/16] sunxi: Allwinner A10/A13/A20 DRAM controller fixes   Ian Campbell
• [U-Boot] [PATCH 6/7] sunxi: Kconfig: move common settings into a shared code block   Ian Campbell
• [U-Boot] Quick guide to Kconfig   Ian Campbell
• [U-Boot] [PATCH 1/2] sunxi: Replace CONFIG_SUN[457]I ifdefs with SOC_IS_SUN[457]I() calls   Ian Campbell
• [U-Boot] [PATCH 2/2] sunxi: Universal Allwinner A10/A13/A20 u-boot binary support   Ian Campbell
• [U-Boot] [PATCH] ARM: HYP/non-sec: Add MIDR check to detect unsupported CPUs   Ian Campbell
• [U-Boot] [RFC/PATCH] sunxi: Populate the default environment for sunxi-based systems   Ian Campbell
• [U-Boot] [PATCH] sun7i: Add support for Olimex A20-OLinuXino-LIME   Ian Campbell
• [U-Boot] U-boot for Banana Pi   Ian Campbell
• [U-Boot] [PATCH] sun7i: Add support for Olimex A20-OLinuXino-LIME   Ian Campbell
• [U-Boot] [PATCH] sun7i: Add support for Olimex A20-OLinuXino-LIME   Ian Campbell
• [U-Boot] tools-only build broken   Ian Campbell
• [U-Boot] tools-only build broken   Ian Campbell
• [PATCH] sunxi: Correct typo CONFIG_FTDFILE => CONFIG_FDTFILE   Ian Campbell
• [U-Boot] [PATCH 7/7] sunxi: Add environment settings to make extlinux.conf booting work   Ian Campbell
• [U-Boot] tools-only build broken   Ian Campbell
• [U-Boot] [PATCH v2] sunxi: Correct typo CONFIG_FTDFILE => CONFIG_FDTFILE   Ian Campbell
• [U-Boot] [PATCH v2] sunxi: Correct typo CONFIG_FTDFILE => CONFIG_FDTFILE   Ian Campbell
• [U-Boot] [PATCH] kconfig: remove redundant "SPL" from CONFIG_SYS_EXTRA_OPTIONS   Ian Campbell
• [U-Boot] Newbies list?   James Chargin
• [U-Boot] [PATCH] nios2: Fix printf size_t format related warnings (again...)   Thomas Chou
• [U-Boot] [PATCH 1/2] nios2: add generic board support   Thomas Chou
• [U-Boot] [PATCH] nios2: add generic board support   Thomas Chou
• [U-Boot] [PATCH v2] nios2: add generic board support   Thomas Chou
• [U-Boot] [PATCH] nios2: remove obsolete PCI5441 and PK1C20 boards   Thomas Chou
• [U-Boot] [PATCH v3] nios2: add generic board support   Thomas Chou
• [U-Boot] [PATCH] nios2: remove EPCS driver   Thomas Chou
• [U-Boot] [PATCH] nios2: remove obsolete PCI5441 and PK1C20 boards   Thomas Chou
• [U-Boot] [PATCH v3] nios2: add generic board support   Thomas Chou
• [U-Boot] [PATCH] nios2: remove EPCS driver   Thomas Chou
• [U-Boot] Pull request: u-boot-nios/master   Thomas Chou
• [U-Boot] [PATCH] cosmetic: README.scrapyard: add NIOS2 boards   Thomas Chou
• [U-Boot] [PATCH] nios2: remove epled driver   Thomas Chou
• [U-Boot] [PATCH] nios2: divide nios2-io.h into each specific drivers and remove it   Thomas Chou
• [U-Boot] [PATCH] nios2: move nios2.h to arch asm directory   Thomas Chou
• [U-Boot] [PATCH] serial: move nios2-yanu.h into opencores_yanu driver   Thomas Chou
• [U-Boot] [PATCH] nios2: link to CONFIG_SYS_MONITOR_BASE and remove text_base hook   Thomas Chou
• [U-Boot] [PATCH v2] nios2: link to CONFIG_SYS_MONITOR_BASE and remove text_base hook   Thomas Chou
• [U-Boot] [PATCH] nios2: rebase nios2-generic board to 3c120 reference design   Thomas Chou
• [U-Boot] [PATCH] nios2: remove epled driver   Thomas Chou
• [U-Boot] [PATCH] nios2: divide nios2-io.h into each specific drivers and remove it   Thomas Chou
• [U-Boot] [PATCH] nios2: move nios2.h to arch asm directory   Thomas Chou
• [U-Boot] [PATCH] serial: move nios2-yanu.h into opencores_yanu driver   Thomas Chou
• [U-Boot] [PATCH v2] nios2: link to CONFIG_SYS_MONITOR_BASE and remove text_base hook   Thomas Chou
• [U-Boot] [PATCH] nios2: rebase nios2-generic board to 3c120 reference design   Thomas Chou
• [U-Boot] Pull request: u-boot-nios/master   Thomas Chou
• [U-Boot] newbie questions regarding some config options.   Chris
• [U-Boot] [PATCH] mmc: fix ERASE_GRP_DEF handling   Jaehoon Chung
• [U-Boot] [PATCH] add header for Android sparse image format   Colin Cross
• [U-Boot] [PATCH] zynq: spl: Add vectors section to linker script   Peter Crosthwaite
• [U-Boot] [PATCH] zynq: spl: Add vectors section to linker script   Peter Crosthwaite
• [U-Boot] [PATCH] zynq: spl: Add vectors section to linker script   Peter Crosthwaite
• [U-Boot] [PATCH] arm: zynq: Add compile time boot mode override   Peter Crosthwaite
• [U-Boot] [PATCH] arm: zynq: Add compile time boot mode override   Peter Crosthwaite
• [U-Boot] [PATCH 0/3] ARM: Zynq: Add ZYBO board   Peter Crosthwaite
• [U-Boot] [PATCH 1/3] arm: dts: zynq: Add digilent ZYBO board dts   Peter Crosthwaite
• [U-Boot] [PATCH 2/3] configs: zynq: Add config support for ZYBO   Peter Crosthwaite
• [U-Boot] [PATCH 3/3] kconfig: zynq: Add ZYBO board   Peter Crosthwaite
• [U-Boot] [PATCH] arm: zynq: Add compile time boot mode override   Peter Crosthwaite
• [U-Boot] [PATCH] arm: zynq: Add compile time boot mode override   Peter Crosthwaite
• [U-Boot] [PATCH 0/3] ARM: Zynq: Add ZYBO board   Peter Crosthwaite
• [U-Boot] [PATCH 2/3] configs: zynq: Add config support for ZYBO   Peter Crosthwaite
• [U-Boot] Newbies list?   Donald Dade
• [U-Boot] [PATCH] ARM: enable ARMv7 virt support for the Arndale board   Christoffer Dall
• [U-Boot] [PATCH] ARM: enable ARMv7 virt support for the Arndale board   Christoffer Dall
• [U-Boot] [PATCH] ARM: enable ARMv7 virt support for the Arndale board   Christoffer Dall
• [U-Boot] [PATCH] ARM: enable ARMv7 virt support for the Arndale board   Christoffer Dall
• [U-Boot] Building u-boot for IMX6   Alexandre Delove
• [U-Boot] uboot imx-usb-loader   Alexandre Delove
• [U-Boot] uboot imx-usb-loader   Alexandre Delove
• [U-Boot] MMU Mapping   Alexandre Delove
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Wolfgang Denk
• [U-Boot] Removing the need for boards.cfg   Wolfgang Denk
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Wolfgang Denk
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Wolfgang Denk
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Wolfgang Denk
• [U-Boot] [PATCH v4 4/5] usb/gadget: fastboot: add sparse image definitions   Wolfgang Denk
• [U-Boot] [PATCH v4 4/5] usb/gadget: fastboot: add sparse image definitions   Wolfgang Denk
• [U-Boot] [PATCH v4 4/5] usb/gadget: fastboot: add sparse image definitions   Wolfgang Denk
• [U-Boot] [PATCH v4 4/5] usb/gadget: fastboot: add sparse image definitions   Wolfgang Denk
• [U-Boot] [PATCH v4 4/5] usb/gadget: fastboot: add sparse image definitions   Wolfgang Denk
• [U-Boot] [PATCH v4 4/5] usb/gadget: fastboot: add sparse image definitions   Wolfgang Denk
• [U-Boot] [PATCH 0/8] zmx25: Add hardware support   Thomas Diener
• [U-Boot] U boot with imx-usb-loader   Nikolay Dimitrov
• [U-Boot] mx6: spl: Rename ncs as ranks and move it to mx6_ddr3_cfg   Nikolay Dimitrov
• [U-Boot] mx6: spl: Rename ncs as ranks and move it to mx6_ddr3_cfg   Nikolay Dimitrov
• [U-Boot] [PATCH] ARM: mx6: Add support for Kosagi Novena   Nikolay Dimitrov
• [U-Boot] u-boot ppc does not work with gcc 4.8   Dirk Eibach
• [U-Boot] [PATCH 1/5] mx6: imx-regs: Remove unused 'omux' field from iomux struct   Fabio Estevam
• [U-Boot] [PATCH 2/5] mx6: crm_regs: Fix CDCDR_SPDIF0_CLK_PODF mask and offset   Fabio Estevam
• [U-Boot] [PATCH 3/5] mx6: crm_regs: Fix MXC_CCM_CLPCR_WB_PER_AT_LPM definition   Fabio Estevam
• [U-Boot] [PATCH 4/5] mx6: crm_regs: Fix MXC_CCM_CIMR_MASK_PERIPH2_CLK_SEL_LOADED   Fabio Estevam
• [U-Boot] [PATCH 5/5] pmic: pmic_pfuze100: Use a shorter name for PMIC name   Fabio Estevam
• [U-Boot] SPL broken on i.mx31 platforms   Fabio Estevam
• [U-Boot] Building u-boot for IMX6   Fabio Estevam
• [U-Boot] Building u-boot for IMX6   Fabio Estevam
• [U-Boot] [PATCH] i.MX31 PDK: Enable generic board for i.MX31 PDK   Fabio Estevam
• [U-Boot] [PATCH] pci: mx6: fix occasional link failures   Fabio Estevam
• [U-Boot] [PATCH] pci: mx6: fix occasional link failures   Fabio Estevam
• [U-Boot] [PATCH] pci: mx6: fix occasional link failures   Fabio Estevam
• [U-Boot] [PATCH] pci: mx6: fix occasional link failures   Fabio Estevam
• [U-Boot] [PATCH v6 16/20] patman: buildman: Correct spelling of 'colour'   Fabio Estevam
• [U-Boot] [PATCH v6 16/20] patman: buildman: Correct spelling of 'colour'   Fabio Estevam
• [U-Boot] pci command does not show Wifi card   Fabio Estevam
• [U-Boot] pci command does not show Wifi card   Fabio Estevam
• [U-Boot] [PATCH] mx31pdk: Change maintainer   Fabio Estevam
• [U-Boot] [PATCH] mx31pdk: Change maintainer   Fabio Estevam
• [U-Boot] Wandboard console speed   Fabio Estevam
• [U-Boot] Wandboard console speed   Fabio Estevam
• [U-Boot] Wandboard console speed   Fabio Estevam
• [U-Boot] [PATCH] mx6sxsabresd: Convert to the new Kconfig style   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx6sxsabresd: Add Ethernet support   Fabio Estevam
• [U-Boot] [PATCH 1/2] mx6sx: Adjust enable_fec_anatop_clock() for mx6solox   Fabio Estevam
• [U-Boot] [PATCH] mx6sxsabresd: Update DDR initialization   Fabio Estevam
• [U-Boot] [PATCH 6/6] warp: Add initial WaRP Board support   Fabio Estevam
• [U-Boot] [PATCH 6/6] warp: Add initial WaRP Board support   Fabio Estevam
• [U-Boot] SPL broken on i.mx31 platforms   Fabio Estevam
• [U-Boot] [PATCH 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Fabio Estevam
• [U-Boot] [PATCH 2/2] net: fec_mxc: Do not error out when FEC_TBD_READY   Fabio Estevam
• [U-Boot] [PATCH 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Fabio Estevam
• [U-Boot] [PATCH 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Fabio Estevam
• [U-Boot] [PATCH v2 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Fabio Estevam
• [U-Boot] [PATCH v2 2/2] net: fec_mxc: Do not error out when FEC_TBD_READY   Fabio Estevam
• [U-Boot] [PATCH v2 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Fabio Estevam
• [U-Boot] [PATCH v2 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Fabio Estevam
• [U-Boot] [PATCH] mx6dlsabresd: Use its own DCD table   Fabio Estevam
• [U-Boot] [PATCH v3 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Fabio Estevam
• [U-Boot] [PATCH v3 2/2] net: fec_mxc: Poll FEC_TBD_READY after polling TDAR   Fabio Estevam
• [U-Boot] [PATCH v3 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Fabio Estevam
• [U-Boot] [PATCH] mx6: Fix cacheline size   Fabio Estevam
• [U-Boot] [PATCH v4] net: fec_mxc: Poll FEC_TBD_READY after polling TDAR   Fabio Estevam
• [U-Boot] [PATCH] mx6: Fix cacheline size   Fabio Estevam
• [U-Boot] [PATCH] mx6: Fix cacheline size   Fabio Estevam
• [U-Boot] [PATCH] mx6: Fix cacheline size   Fabio Estevam
• [U-Boot] [PATCH v5 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Fabio Estevam
• [U-Boot] [PATCH v5 2/2] net: fec_mxc: Poll FEC_TBD_READY after polling TDAR   Fabio Estevam
• [PATCH v6 2/2] net: fec_mxc: Poll FEC_TBD_READY after polling TDAR   Fabio Estevam
• [U-Boot] [PATCH v4] net: fec_mxc: Poll FEC_TBD_READY after polling TDAR   Fabio Estevam
• [U-Boot] [PATCH v6 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Fabio Estevam
• [U-Boot] [PATCH v6 2/2] net: fec_mxc: Poll FEC_TBD_READY after polling TDAR   Fabio Estevam
• [U-Boot] [PATCH 1/3] mx6: imx-regs: Provide a structure for GPC registers   Fabio Estevam
• [U-Boot] [PATCH 2/3] pcie_imx: Add mx6solox support   Fabio Estevam
• [U-Boot] [PATCH 3/3] mx6sxsabresd: Add PCI support   Fabio Estevam
• [U-Boot] [PATCH v2 1/3] mx6: imx-regs: Provide a structure for GPC registers   Fabio Estevam
• [U-Boot] [PATCH v2 2/3] pcie_imx: Add mx6solox support   Fabio Estevam
• [U-Boot] [PATCH v2 3/3] mx6sxsabresd: Add PCI support   Fabio Estevam
• [U-Boot] [PATCH v2 2/3] pcie_imx: Add mx6solox support   Fabio Estevam
• [U-Boot] [PATCH v6 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Fabio Estevam
• [U-Boot] [PATCH v7 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Fabio Estevam
• [U-Boot] [PATCH v7 2/2] net: fec_mxc: Poll FEC_TBD_READY after polling TDAR   Fabio Estevam
• [U-Boot] [PATCH v3 1/3] mx6: imx-regs: Provide a structure for GPC registers   Fabio Estevam
• [U-Boot] [PATCH v3 2/3] pcie_imx: Add mx6solox support   Fabio Estevam
• [U-Boot] [PATCH v3 3/3] mx6sxsabresd: Add PCI support   Fabio Estevam
• [U-Boot] [PATCH v2 2/3] pcie_imx: Add mx6solox support   Fabio Estevam
• [U-Boot] [PATCH v3 3/3] mx6sxsabresd: Add PCI support   Fabio Estevam
• [U-Boot] [PATCH] ARM: mx6: Add support for Kosagi Novena   Fabio Estevam
• [U-Boot] [PATCH v3 3/3] mx6sxsabresd: Add PCI support   Fabio Estevam
• [U-Boot] [PATCH v3 3/3] mx6sxsabresd: Add PCI support   Fabio Estevam
• [U-Boot] [PATCH] ARM: mx6: Add support for Kosagi Novena   Fabio Estevam
• [U-Boot] [PATCH] ARM: mx6: Add support for Kosagi Novena   Fabio Estevam
• [U-Boot] [PATCH] ARM: mx6: Add support for Kosagi Novena   Fabio Estevam
• [U-Boot] [PATCH] ARM: mx6: Add support for Kosagi Novena   Fabio Estevam
• [U-Boot] [PATCH v7 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Fabio Estevam
• [U-Boot] [PATCH] sun7i: Add support for Olimex A20-OLinuXino-LIME   Naoki FUKAUMI
• [U-Boot] [PATCH] sun7i: Add support for Olimex A20-OLinuXino-LIME   Naoki FUKAUMI
• [U-Boot] [PATCH] sun7i: Add support for Olimex A20-OLinuXino-LIME   Naoki FUKAUMI
• [U-Boot] MMU Mapping   Peng Fan
• [U-Boot] [PATCH 0/8] U-Boot port to Xtensa architecture   Max Filippov
• [U-Boot] [PATCH 1/8] net/ethoc: support private memory configurations   Max Filippov
• [U-Boot] [PATCH 2/8] net/ethoc: fix warnings from ethoc_read/ethoc_write   Max Filippov
• [U-Boot] [PATCH 3/8] net/ethoc: don't advertise gigabit on the connected PHY   Max Filippov
• [U-Boot] [PATCH 4/8] Makefile: allow overriding '-ansi' in LDPPFLAGS   Max Filippov
• [U-Boot] [PATCH 5/8] xtensa: add support for the xtensa processor architecture [1/2]   Max Filippov
• [U-Boot] [PATCH 6/8] xtensa: add support for the xtensa processor architecture [2/2]   Max Filippov
• [U-Boot] [PATCH 7/8] xtensa: add core information for the dc232b processor   Max Filippov
• [U-Boot] [PATCH 8/8] xtensa: add support for the 'xtfpga' evaluation board   Max Filippov
• [U-Boot] [PATCH 0/8] U-Boot port to Xtensa architecture   Max Filippov
• [U-Boot] [PATCH 0/8] U-Boot port to Xtensa architecture   Max Filippov
• [U-Boot] QorIQ P1020 NAND Flash 2k-Page-Size Problem   Allan Fislor
• [U-Boot] QorIQ P1020 NAND Flash 2k-Page-Size Problem   Allan Fislor
• [U-Boot] QorIQ P1020 NAND Flash 2k-Page-Size Problem   Allan Fislor
• [U-Boot] [PATCH] The _config target is not present anymore, mention _defconfig instead   Holger Hans Peter Freyther
• [U-Boot] [PATCH] ARM: enable ARMv7 virt support for the Arndale board   Andreas Färber
• [U-Boot] [PATCH] ARM: enable ARMv7 virt support for the Arndale board   Andreas Färber
• [U-Boot] [PATCH] omap3_beagle: Add boot script support to omap3 beagle board   Guillaume GARDET
• [U-Boot] [PATCH] imx: nitrogen6x: Replace 'fatload' by 'load' command in env settings to be filesystem independent   Guillaume GARDET
• [U-Boot] MDIO_DEVAD_NONE   Danny Gale
• [U-Boot] T4240 SGMII "Tx buffer not ready"   Danny Gale
• [U-Boot] [PATCH] Disable FLASH_AMLV256U support for TOP860 target   Vasili Galka
• [U-Boot] Build broken for bf538f-ezkit board - not enough ram   Vasili Galka
• [U-Boot] [PATCH] Makefile: Use Kbuild style for system_map.o generation step   Vasili Galka
• [U-Boot] [PATCH] bfin: Use optimization for size instead of speed on two boards   Vasili Galka
• [U-Boot] Build broken for bf538f-ezkit board - not enough ram   Vasili Galka
• [U-Boot] [PATCH] nios2: Fix printf size_t format related warnings (again...)   Vasili Galka
• [U-Boot] Recommended MIPS toolchain   Vasili Galka
• [U-Boot] Recommended MIPS toolchain   Vasili Galka
• [U-Boot] Recommended MIPS toolchain   Vasili Galka
• [U-Boot] Recommended AVR32 toolchain   Vasili Galka
• [U-Boot] Recommended AVR32 toolchain   Vasili Galka
• [U-Boot] Recommended SH toolchain   Vasili Galka
• [U-Boot] [PATCH] samsung: dfu: Provide correct Vendor and Product IDs for UMS gadget   Vasili Galka
• [U-Boot] [U-Boot,1/2] e1000: Implement dcache support   Vasili Galka
• [U-Boot] [PATCH] arc: Fix printf size_t format related warnings (again...)   Vasili Galka
• [U-Boot] [PATCH] microblaze: Fix printf size_t format related warnings (again...)   Vasili Galka
• [U-Boot] [PATCH] Fix a few printf argument verification warnings   Vasili Galka
• [U-Boot] [PATCH] axs101: Fix type mismatch warning   Vasili Galka
• [U-Boot] [PATCH] openrisc: Fix a few type cast related warnings   Vasili Galka
• [U-Boot] [PATCH] mpc5xxx: Add stub implementation of cache functions   Vasili Galka
• [U-Boot] [PATCH] axs101: Fix type mismatch warning   Vasili Galka
• [U-Boot] [PATCH v2] axs101: Fix type mismatch warning   Vasili Galka
• [U-Boot] [PATCH v2] common: fix compiler warning on wrong printf format   Vasili Galka
• [U-Boot] [PATCH v2] common: fix compiler warning on wrong printf format   Vasili Galka
• [U-Boot] uniform boot flash   Gangadhar.V
• [U-Boot] [RFC] Replace {fat, ext2}load by load in default env settings   Guillaume Gardet
• [U-Boot] [RFC] Add EXT filesystem support to SPL   Guillaume Gardet
• [U-Boot] [PATCH 7/7] sunxi: Add environment settings to make extlinux.conf booting work   Dennis Gilmore
• [U-Boot] [PATCH 7/7] sunxi: Add environment settings to make extlinux.conf booting work   Dennis Gilmore
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Dennis Gilmore
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Dennis Gilmore
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Dennis Gilmore
• [U-Boot] Wandboard console speed   Dennis Gilmore
• [U-Boot] Wandboard console speed   Dennis Gilmore
• [U-Boot] Wandboard console speed   Dennis Gilmore
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Simon Glass
• [U-Boot] [PATCH v3 14/16] tegra: dts: Add serial port details   Simon Glass
• [U-Boot] [PATCH v3 15/16] RFC: dm: tegra: Enable driver model for serial   Simon Glass
• [U-Boot] [PATCH v3 07/16] sandbox: dts: Add a serial console node   Simon Glass
• [U-Boot] [PATCH v3 16/16] dm: tegra: Use V_NS16550_CLK only in SPL builds   Simon Glass
• [U-Boot] [PATCH v8 0/13] Kconfig for U-Boot   Simon Glass
• [U-Boot] Removing the need for boards.cfg   Simon Glass
• [U-Boot] [PATCH v3 14/16] tegra: dts: Add serial port details   Simon Glass
• [U-Boot] [PATCH v3 07/16] sandbox: dts: Add a serial console node   Simon Glass
• [U-Boot] [PATCH v3 07/16] sandbox: dts: Add a serial console node   Simon Glass
• [U-Boot] [PATCH] Makefile: restore *_config target   Simon Glass
• [U-Boot] [PATCH] rsa: Fix two errors in the implementation   Simon Glass
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Simon Glass
• [U-Boot] [PATCH v1 2/4] get_maintainer.pl: import script from linux 3.15   Simon Glass
• [U-Boot] [PATCH v3 2/4] get_maintainer.pl: import script from linux 3.15   Simon Glass
• [U-Boot] [PATCH 1/3] image: introduce genimg_get_kernel_addr()   Simon Glass
• [U-Boot] [PATCH v2 2/3] buildman: Add some notes about moving from MAKEALL   Simon Glass
• [U-Boot] Driver Model and DTS Parsing   Simon Glass
• [U-Boot] [PATCH 3/3] bootm: use genimg_get_kernel_addr()   Simon Glass
• [U-Boot] [PATCH v3 0/8] Add some missing buildman features and deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v3 1/8] buildman: Fix a few typos   Simon Glass
• [U-Boot] [PATCH v3 2/8] buildman: Add some notes about moving from MAKEALL   Simon Glass
• [U-Boot] [PATCH v3 3/8] buildman: Allow building of current source tree   Simon Glass
• [U-Boot] [PATCH v3 4/8] buildman: Move BuilderThread code to its own file   Simon Glass
• [U-Boot] [PATCH v3 5/8] buildman: Sort command line options   Simon Glass
• [U-Boot] [PATCH v3 6/8] buildman: Refactor output options   Simon Glass
• [U-Boot] [PATCH v3 7/8] buildman: Add verbose option to display errors as they happen   Simon Glass
• [U-Boot] [PATCH v3 8/8] RFC: Deprecate MAKEALL   Simon Glass
• [U-Boot] [RFC PATCH v2 0/2] Make Python scripts compatible with older versions   Simon Glass
• [U-Boot] [PATCH v3 14/16] tegra: dts: Add serial port details   Simon Glass
• [U-Boot] Quick guide to Kconfig   Simon Glass
• [U-Boot] [PATCH V4 0/9] peach_pit: Add support for FIMD, DP and parade chip   Simon Glass
• [U-Boot] [PATCH v3 0/9] Add a pre-relocation malloc() implementation   Simon Glass
• [U-Boot] Please pull u-boot-dm.git   Simon Glass
• [U-Boot] [PATCH v5 05/11] exynos: dts: Adjust device tree files for U-Boot   Simon Glass
• [U-Boot] [PATCH v3 14/16] tegra: dts: Add serial port details   Simon Glass
• [U-Boot] Driver Model and DTS Parsing   Simon Glass
• [U-Boot] [PATCH v2 0/3] Add some missing buildman features and deprecate MAKEALL   Simon Glass
• [U-Boot] Removing the need for boards.cfg   Simon Glass
• [U-Boot] [PATCH v5 05/11] exynos: dts: Adjust device tree files for U-Boot   Simon Glass
• [U-Boot] [PATCH v2 1/3] image: introduce genimg_get_kernel_addr()   Simon Glass
• [U-Boot] [PATCH v2 3/3] bootm: use genimg_get_kernel_addr()   Simon Glass
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Simon Glass
• [U-Boot] [PATCH v2 0/3] Add some missing buildman features and deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v2 0/3] Add some missing buildman features and deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v2 0/3] Add some missing buildman features and deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v5 05/11] exynos: dts: Adjust device tree files for U-Boot   Simon Glass
• [U-Boot] [PATCH v4 0/13] Add some missing buildman features and deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v4 01/13] buildman: Fix a few typos   Simon Glass
• [U-Boot] [PATCH v4 02/13] buildman: Add some notes about moving from MAKEALL   Simon Glass
• [U-Boot] [PATCH v4 03/13] buildman: Allow building of current source tree   Simon Glass
• [U-Boot] [PATCH v4 04/13] buildman: Move BuilderThread code to its own file   Simon Glass
• [U-Boot] [PATCH v4 05/13] buildman: Sort command line options   Simon Glass
• [U-Boot] [PATCH v4 06/13] buildman: Refactor output options   Simon Glass
• [U-Boot] [PATCH v4 07/13] buildman: Add verbose option to display errors as they happen   Simon Glass
• [U-Boot] [PATCH v4 08/13] buildman: Remove unused non-incremental build method code   Simon Glass
• [U-Boot] [PATCH v4 09/13] buildman: Add an option to specify the buildman config file   Simon Glass
• [U-Boot] [PATCH v4 10/13] buildman: Add a message indicating there are no errors   Simon Glass
• [U-Boot] [PATCH v4 11/13] buildman: Search for *cc instead of *gcc for the compiler   Simon Glass
• [U-Boot] [PATCH v4 12/13] buildman: Add a few more toolchain examples to the README   Simon Glass
• [U-Boot] [PATCH v4 13/13] RFC: Deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v4 11/13] buildman: Search for *cc instead of *gcc for the compiler   Simon Glass
• [U-Boot] [PATCH v4 13/13] RFC: Deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v4 13/13] RFC: Deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v4 03/13] buildman: Allow building of current source tree   Simon Glass
• [U-Boot] [PATCH v4 13/13] RFC: Deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v4 02/13] buildman: Add some notes about moving from MAKEALL   Simon Glass
• [U-Boot] [PATCH v4 02/13] buildman: Add some notes about moving from MAKEALL   Simon Glass
• [U-Boot] [PATCH] drivers: rtc: remove dead drivers   Simon Glass
• [U-Boot] [PATCH v4 02/13] buildman: Add some notes about moving from MAKEALL   Simon Glass
• [U-Boot] [PATCH v5 05/11] exynos: dts: Adjust device tree files for U-Boot   Simon Glass
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Simon Glass
• [U-Boot] [PATCH v4 02/13] buildman: Add some notes about moving from MAKEALL   Simon Glass
• [U-Boot] [PATCH] tools, scripts: refactor error-out statements of Python scripts   Simon Glass
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Simon Glass
• [U-Boot] [PATCH 3/3] ARM: rpi_b: use new generic $bootcmd   Simon Glass
• [U-Boot] [PATCH v4 02/13] buildman: Add some notes about moving from MAKEALL   Simon Glass
• [U-Boot] Removing the need for boards.cfg   Simon Glass
• [U-Boot] [PATCH v5 0/13] Add some missing buildman features and deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v5 01/13] buildman: Fix a few typos   Simon Glass
• [U-Boot] [PATCH v5 02/13] buildman: Add some notes about moving from MAKEALL   Simon Glass
• [U-Boot] [PATCH v5 03/13] buildman: Allow building of current source tree   Simon Glass
• [U-Boot] [PATCH v5 04/13] buildman: Move BuilderThread code to its own file   Simon Glass
• [U-Boot] [PATCH v5 05/13] buildman: Sort command line options   Simon Glass
• [U-Boot] [PATCH v5 06/13] buildman: Refactor output options   Simon Glass
• [U-Boot] [PATCH v5 07/13] buildman: Add verbose option to display errors as they happen   Simon Glass
• [U-Boot] [PATCH v5 08/13] buildman: Remove unused non-incremental build method code   Simon Glass
• [U-Boot] [PATCH v5 09/13] buildman: Add an option to specify the buildman config file   Simon Glass
• [U-Boot] [PATCH v5 10/13] buildman: Add a message indicating there are no errors   Simon Glass
• [U-Boot] [PATCH v5 11/13] buildman: Add a few more toolchain examples to the README   Simon Glass
• [U-Boot] [PATCH v5 12/13] buildman: Introduce an 'and' operator for board selection   Simon Glass
• [U-Boot] [PATCH v5 13/13] RFC: Deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH 2/3] ARM: tegra: use new generic $bootcmd   Simon Glass
• [U-Boot] [PATCH v5 12/13] buildman: Introduce an 'and' operator for board selection   Simon Glass
• [U-Boot] [PATCH v3 5/9] arm: Support pre-relocation malloc()   Simon Glass
• [U-Boot] [PATCH v3 2/9] arm: Set up global data before board_init_f()   Simon Glass
• [U-Boot] [PATCH 0/25] Introduce driver model support for SPI, SPI flash, cros_ec   Simon Glass
• [U-Boot] [PATCH v6 0/20] Add some missing buildman features and deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v6 01/20] buildman: Fix a few typos   Simon Glass
• [U-Boot] [PATCH v6 02/20] buildman: Add some notes about moving from MAKEALL   Simon Glass
• [U-Boot] [PATCH v6 03/20] buildman: Allow building of current source tree   Simon Glass
• [U-Boot] [PATCH v6 04/20] buildman: Move BuilderThread code to its own file   Simon Glass
• [U-Boot] [PATCH v6 05/20] buildman: Sort command line options   Simon Glass
• [U-Boot] [PATCH v6 06/20] buildman: Refactor output options   Simon Glass
• [U-Boot] [PATCH v6 07/20] buildman: Add verbose option to display errors as they happen   Simon Glass
• [U-Boot] [PATCH v6 08/20] buildman: Remove unused non-incremental build method code   Simon Glass
• [U-Boot] [PATCH v6 09/20] buildman: Add an option to specify the buildman config file   Simon Glass
• [U-Boot] [PATCH v6 10/20] buildman: Add a message indicating there are no errors   Simon Glass
• [U-Boot] [PATCH v6 11/20] buildman: Add a few more toolchain examples to the README   Simon Glass
• [U-Boot] [PATCH v6 12/20] buildman: Introduce an 'and' operator for board selection   Simon Glass
• [U-Boot] [PATCH v6 13/20] buildman: Allow selection of the number of commits to build   Simon Glass
• [U-Boot] [PATCH v6 14/20] patman: Move the 'git log' command into a function   Simon Glass
• [U-Boot] [PATCH v6 15/20] patman: Only use git's --no-decorate when available   Simon Glass
• [U-Boot] [PATCH v6 16/20] patman: buildman: Correct spelling of 'colour'   Simon Glass
• [U-Boot] [PATCH v6 17/20] patman: Fix indentation in terminal.py   Simon Glass
• [U-Boot] [PATCH v6 18/20] patman: Correct unit tests to run correctly   Simon Glass
• [U-Boot] [PATCH v6 19/20] patman: Remove the -a option   Simon Glass
• [U-Boot] [PATCH v6 20/20] RFC: Deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v6 16/20] patman: buildman: Correct spelling of 'colour'   Simon Glass
• [U-Boot] [PATCH v6 16/20] patman: buildman: Correct spelling of 'colour'   Simon Glass
• [U-Boot] [PATCH V2 00/18] Introduce cm-fx6 board (partial V2 cont.)   Simon Glass
• [U-Boot] Removing the need for boards.cfg   Simon Glass
• [U-Boot] Removing the need for boards.cfg   Simon Glass
• [U-Boot] Removing the need for boards.cfg   Simon Glass
• [U-Boot] [PATCH V2 00/18] Introduce cm-fx6 board (partial V2 cont.)   Simon Glass
• [U-Boot] [PATCH v6 0/12] Enable driver model for GPIOs on Tegra and Exynos   Simon Glass
• [U-Boot] [PATCH v6 01/12] dm: gpio: Enhance gpio command to show only active GPIOs   Simon Glass
• [U-Boot] [PATCH v6 02/12] dm: gpio: Allow gpio command to adjust GPIOs that are busy   Simon Glass
• [U-Boot] [PATCH v6 03/12] tegra: Convert tegra GPIO driver to use driver model   Simon Glass
• [U-Boot] [PATCH v6 04/12] exynos: dts: Convert /include/ to #include   Simon Glass
• [U-Boot] [PATCH v6 05/12] exynos: Bring in pinctrl dts files from Linux kernel   Simon Glass
• [U-Boot] [PATCH v6 06/12] exynos: dts: Remove unused pinctrl information to save space   Simon Glass
• [U-Boot] [PATCH v6 07/12] exynos: dts: Adjust device tree files for U-Boot   Simon Glass
• [U-Boot] [PATCH v6 08/12] exynos: Tidy up GPIO headers   Simon Glass
• [U-Boot] [PATCH v6 09/12] exynos: Tidy up GPIO defines   Simon Glass
• [U-Boot] [PATCH v6 10/12] exynos: Make sure that GPIOs are requested   Simon Glass
• [U-Boot] [PATCH v6 11/12] exynos: gpio: Convert to driver model   Simon Glass
• [U-Boot] [PATCH v6 12/12] dm: sandbox: dts: Add a GPIO bank   Simon Glass
• [U-Boot] [PATCH v4 0/15] Introduce driver model serial uclass   Simon Glass
• [U-Boot] [PATCH v4 01/15] serial: Set up the 'priv' pointer when creating a serial device   Simon Glass
• [U-Boot] [PATCH v4 02/15] dm: Adjust lists_bind_fdt() to return the bound device   Simon Glass
• [U-Boot] [PATCH v4 03/15] dm: Add a uclass for serial devices   Simon Glass
• [U-Boot] [PATCH v4 04/15] Set up stdio earlier when using driver model   Simon Glass
• [U-Boot] [PATCH v4 05/15] sandbox: Convert serial driver to use driver model   Simon Glass
• [U-Boot] [PATCH v4 06/15] sandbox: serial: Support a coloured console   Simon Glass
• [U-Boot] [PATCH v4 07/15] sandbox: dts: Add a serial console node   Simon Glass
• [U-Boot] [PATCH v4 08/15] dm: exynos: Mark exynos5 console as pre-reloc   Simon Glass
• [U-Boot] [PATCH v4 09/15] dm: exynos: Move serial to driver model   Simon Glass
• [U-Boot] [PATCH v4 10/15] dm: Make driver model available before board_init()   Simon Glass
• [U-Boot] [PATCH v4 11/15] dm: serial: Move baud rate calculation to ns16550.c   Simon Glass
• [U-Boot] [PATCH v4 12/15] dm: serial: Collect common baud rate code in ns16550   Simon Glass
• [U-Boot] [PATCH v4 13/15] dm: serial: Add driver model support for ns16550   Simon Glass
• [U-Boot] [PATCH v4 14/15] tegra: dts: Add serial port details   Simon Glass
• [U-Boot] [PATCH v4 15/15] dm: tegra: Enable driver model for serial   Simon Glass
• [U-Boot] [PATCH] tools: fix typo in tools/image-host.c   Simon Glass
• [U-Boot] [PATCH] tools, fit_info: increase buffer for command name   Simon Glass
• [U-Boot] Removing the need for boards.cfg   Simon Glass
• [U-Boot] [PATCH 0/25] Introduce driver model support for SPI, SPI flash, cros_ec   Simon Glass
• [U-Boot] [PATCH v2] Makefile: remove generated boards.cfg within make distclean   Simon Glass
• [U-Boot] [PATCH V2 00/18] Introduce cm-fx6 board (partial V2 cont.)   Simon Glass
• [U-Boot] [PATCH V3 12/18] arm: mx6: add support for Compulab cm-fx6 CoM   Simon Glass
• [U-Boot] [PATCH v6 20/20] RFC: Deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v6 20/20] RFC: Deprecate MAKEALL   Simon Glass
• [U-Boot] Please pull u-boot-x86.git branch buildman   Simon Glass
• [U-Boot] Please pull u-boot-x86.git branch buildman   Simon Glass
• [U-Boot] Build broken for bf538f-ezkit board - not enough ram   Simon Glass
• [U-Boot] how to read the buildman report   Simon Glass
• [U-Boot] [PATCH v4 15/15] dm: tegra: Enable driver model for serial   Simon Glass
• [U-Boot] how to read the buildman report   Simon Glass
• [U-Boot] [PATCH v7 0/5] Add some missing buildman features and deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v7 1/5] patman: Support the 'reverse' option for 'git log'   Simon Glass
• [U-Boot] [PATCH v7 2/5] patman: Fix indentation in terminal.py   Simon Glass
• [U-Boot] [PATCH v7 3/5] patman: Correct unit tests to run correctly   Simon Glass
• [U-Boot] [PATCH v7 4/5] patman: Remove the -a option   Simon Glass
• [U-Boot] [PATCH v7 5/5] RFC: Deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v2 3/3] bootm: use genimg_get_kernel_addr()   Simon Glass
• [U-Boot] [PATCH v8 0/6] Add some missing buildman features and deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v8 1/6] patman: Support the 'reverse' option for 'git log'   Simon Glass
• [U-Boot] [PATCH v8 2/6] patman: Fix indentation in terminal.py   Simon Glass
• [U-Boot] [PATCH v8 3/6] patman: Correct unit tests to run correctly   Simon Glass
• [U-Boot] [PATCH v8 4/6] patman: Remove the -a option   Simon Glass
• [U-Boot] [PATCH v8 5/6] patman: Use --no-pager' to stop git from forking a pager   Simon Glass
• [U-Boot] [PATCH v8 6/6] RFC: Deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v7 5/5] RFC: Deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v7 5/5] RFC: Deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v4 14/15] tegra: dts: Add serial port details   Simon Glass
• [U-Boot] [PATCH v4 14/15] tegra: dts: Add serial port details   Simon Glass
• [U-Boot] [PATCH] image: fix bootm failure for FIT image   Simon Glass
• [U-Boot] [PATCH v2] kconfig: convert Kconfig helper script into a shell script   Simon Glass
• [U-Boot] [PATCH] buildman: Create parent directories as necessary   Simon Glass
• [U-Boot] [PATCH 01/23] fdt: Add functions to query a node's #address- and #size-cells   Simon Glass
• [U-Boot] [PATCH 02/23] fdt: Add a function to get the index of a string   Simon Glass
• [U-Boot] [PATCH 03/23] fdt: Add resource parsing functions   Simon Glass
• [U-Boot] [PATCH 05/23] fdt: Add a subnodes iterator macro   Simon Glass
• [U-Boot] [PATCH 2/3] image: move all function comments to header file   Simon Glass
• [U-Boot] [PATCH 04/23] fdt: Add a function to return PCI BDF triplet   Simon Glass
• [U-Boot] [PATCH 08/23] Add pr_fmt() macro   Simon Glass
• [U-Boot] [PATCH 23/23] ARM: tegra: Enable PCIe on Jetson TK1   Simon Glass
• [U-Boot] [PATCH 01/23] fdt: Add functions to query a node's #address- and #size-cells   Simon Glass
• [U-Boot] [PATCH 03/23] fdt: Add resource parsing functions   Simon Glass
• [U-Boot] [PATCH 05/23] fdt: Add a subnodes iterator macro   Simon Glass
• [U-Boot] [PATCH 08/23] Add pr_fmt() macro   Simon Glass
• [U-Boot] [PATCH 23/23] ARM: tegra: Enable PCIe on Jetson TK1   Simon Glass
• [U-Boot] [PATCH 03/23] fdt: Add resource parsing functions   Simon Glass
• [U-Boot] [PATCH 03/23] fdt: Add resource parsing functions   Simon Glass
• [U-Boot] [PATCH v2] buildman: Create parent directories as necessary   Simon Glass
• [U-Boot] [PATCH] kconfig: convert Kconfig helper script into a shell script   Simon Glass
• [U-Boot] [PATCH 0/7] tools/genboardscfg.py: various fixes and performance improvement   Simon Glass
• [U-Boot] [PATCH 1/7] tools/genboardscfg.py: ignore defconfigs starting with a dot   Simon Glass
• [U-Boot] [PATCH 2/7] tools/genboardscfg.py: be tolerant of missing MAINTAINERS   Simon Glass
• [U-Boot] [PATCH 3/7] tools/genboardscfg.py: be tolerant of insane Kconfig   Simon Glass
• [U-Boot] [PATCH 4/7] tools/genboardscfg.py: wait for unfinished subprocesses before error-out   Simon Glass
• [U-Boot] [PATCH 5/7] tools/genboardscfg.py: fix minor problems on termination   Simon Glass
• [U-Boot] [PATCH 6/7] tools/genboardscfg.py: check if the boards.cfg is up to date   Simon Glass
• [U-Boot] [PATCH 7/7] tools/genboardscfg.py: improve performance   Simon Glass
• [U-Boot] [PATCH v3 1/2] image: fix bootm failure for FIT image   Simon Glass
• [U-Boot] [PATCH 23/23] ARM: tegra: Enable PCIe on Jetson TK1   Simon Glass
• [U-Boot] buildman: make-flags variables broken?   Simon Glass
• [U-Boot] [PATCH 23/23] ARM: tegra: Enable PCIe on Jetson TK1   Simon Glass
• [U-Boot] [PATCH v3 1/2] image: fix bootm failure for FIT image   Simon Glass
• [U-Boot] [PATCH 1/2] Fix test failure caused by bad handling of ramdisk   Simon Glass
• [U-Boot] [PATCH 2/2] Correct sandbox filesystem commands in FIT image test   Simon Glass
• [U-Boot] [PATCH v8 0/6] Add some missing buildman features and deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v3] kconfig: convert Kconfig helper script into a shell script   Simon Glass
• [U-Boot] [PATCH v2 1/3] image: fix bootm failure for FIT image   Simon Glass
• [U-Boot] [PATCH 2/2] bootm: make sure pass NULL when argc < 1   Simon Glass
• [U-Boot] [PATCH v3 1/2] image: fix bootm failure for FIT image   Simon Glass
• [U-Boot] A minor issue of Patman   Simon Glass
• [U-Boot] [URGENT] Fatal Bug of Patman   Simon Glass
• [U-Boot] buildman: make-flags variables broken?   Simon Glass
• [U-Boot] [RFC PATCH] tools/buildman: Add env-flags section support   Simon Glass
• [U-Boot] [PATCH 23/23] ARM: tegra: Enable PCIe on Jetson TK1   Simon Glass
• [U-Boot] [PATCH 2/2] buildman: run genboardscfg.py all the time   Simon Glass
• [U-Boot] [PATCH] git-mailrc: add patman and buildman alias   Simon Glass
• [U-Boot] Patman bug report: Commit-notes not working   Simon Glass
• [U-Boot] [PATCH 5/7] tools/genboardscfg.py: fix minor problems on termination   Simon Glass
• [U-Boot] [PATCH 6/7] tools/genboardscfg.py: check if the boards.cfg is up to date   Simon Glass
• [U-Boot] [PATCH] patman: refactor help message   Simon Glass
• [U-Boot] [PATCH] buildman: refactor help message   Simon Glass
• [U-Boot] [PATCH v2] buildman: refactor help message   Simon Glass
• [U-Boot] buildman with --exclude option   Simon Glass
• [U-Boot] [PATCH 01/23] fdt: Add functions to query a node's #address- and #size-cells   Simon Glass
• [U-Boot] [PATCH v7 5/5] RFC: Deprecate MAKEALL   Simon Glass
• [U-Boot] Treat warnings different from errors in buildman?   Simon Glass
• [U-Boot] [RFC PATCH] tools/buildman: Add env-flags section support   Simon Glass
• [U-Boot] [PATCH] patman: implement 'reverse' in LogCmd()   Simon Glass
• [U-Boot] [PATCH v9 0/14] Add some missing buildman features and deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v9 01/14] patman: Support the 'reverse' option for 'git log'   Simon Glass
• [U-Boot] [PATCH v9 02/14] patman: Fix indentation in terminal.py   Simon Glass
• [U-Boot] [PATCH v9 03/14] patman: Correct unit tests to run correctly   Simon Glass
• [U-Boot] [PATCH v9 04/14] patman: Remove the -a option   Simon Glass
• [U-Boot] [PATCH v9 05/14] patman: Use --no-pager' to stop git from forking a pager   Simon Glass
• [U-Boot] [PATCH v9 06/14] patman: Avoid changing the order of tags   Simon Glass
• [U-Boot] [PATCH v9 07/14] buildman: Set the return code to indicate build result   Simon Glass
• [U-Boot] [PATCH v9 08/14] buildman: Allow make-flags variables to include '-' and '_'   Simon Glass
• [U-Boot] [PATCH v9 09/14] buildman: Implement an option to exclude boards from the build   Simon Glass
• [U-Boot] [PATCH v9 10/14] buildman: Remove the directory prefix from each error line   Simon Glass
• [U-Boot] [PATCH v9 11/14] buildman: Add an option to show which boards caused which errors   Simon Glass
• [U-Boot] [PATCH v9 12/14] buildman: Separate out display of warnings and errors   Simon Glass
• [U-Boot] [PATCH v9 13/14] patman: Fix detection of git version   Simon Glass
• [U-Boot] [PATCH v9 14/14] RFC: Deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH 0/15] buildman: Expand test coverage   Simon Glass
• [U-Boot] [PATCH 01/15] patman: Add a way of recording terminal output for testing   Simon Glass
• [U-Boot] [PATCH 02/15] buildman: Send builder output through a function for testing   Simon Glass
• [U-Boot] [PATCH 03/15] buildman: Enhance basic test to check summary output   Simon Glass
• [U-Boot] [PATCH 04/15] patman: RunPipe() should not pipe stdout/stderr unless asked   Simon Glass
• [U-Boot] [PATCH 05/15] buildman: Move the command line code into its own file   Simon Glass
• [U-Boot] [PATCH 06/15] buildman: Move full help code into the control module   Simon Glass
• [U-Boot] [PATCH 07/15] patman: Provide a way to intercept commands for testing   Simon Glass
• [U-Boot] [PATCH 08/15] buildman: Add a functional test   Simon Glass
• [U-Boot] [PATCH 09/15] buildman: Set up bsettings outside the control module   Simon Glass
• [U-Boot] [PATCH 10/15] buildman: Avoid looking at config file or toolchains in tests   Simon Glass
• [U-Boot] [PATCH 11/15] buildman: Allow tests to have their own boards   Simon Glass
• [U-Boot] [PATCH 12/15] buildman: Correct counting of build failures on retry   Simon Glass
• [U-Boot] [PATCH 13/15] buildman: Provide an internal option to clean the outpur dir   Simon Glass
• [U-Boot] [PATCH 14/15] patman: Start with a clean series when needed   Simon Glass
• [U-Boot] [PATCH 15/15] buildman: Add additional functional tests   Simon Glass
• [U-Boot] [PATCH v6 03/12] tegra: Convert tegra GPIO driver to use driver model   Simon Glass
• [U-Boot] [PATCH v9 0/14] Add some missing buildman features and deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v2 01/40] vsprintf: Add modifier for phys_addr_t   Simon Glass
• [U-Boot] [PATCH v6 03/12] tegra: Convert tegra GPIO driver to use driver model   Simon Glass
• [U-Boot] [PATCH V4 0/9] peach_pit: Add support for FIMD, DP and parade chip   Simon Glass
• [U-Boot] [PATCH v9 0/14] Add some missing buildman features and deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v9 11/14] buildman: Add an option to show which boards caused which errors   Simon Glass
• [U-Boot] [PATCH v9 10/14] buildman: Remove the directory prefix from each error line   Simon Glass
• [U-Boot] [PATCH v2 01/40] vsprintf: Add modifier for phys_addr_t   Simon Glass
• [U-Boot] [PATCH v2 02/40] fdt: Add a function to count strings   Simon Glass
• [U-Boot] [PATCH v2 03/40] fdt: Add a function to get the index of a string   Simon Glass
• [U-Boot] [PATCH v2 04/40] fdt: Add functions to retrieve strings   Simon Glass
• [U-Boot] [PATCH v2 05/40] fdt: Add resource parsing functions   Simon Glass
• [U-Boot] [PATCH v2 32/40] ARM: cache_v7: Various minor cleanups   Simon Glass
• [U-Boot] [PATCH v2 33/40] ARM: cache-cp15: Use more accurate types   Simon Glass
• [U-Boot] [PATCH v2 34/40] malloc: Output region when debugging   Simon Glass
• [U-Boot] [PATCH v2 35/40] ARM: Implement non-cached memory support   Simon Glass
• [U-Boot] [PATCH v2 13/40] i2c: Add high-level API   Simon Glass
• [U-Boot] buildman: suspect issue with patman tags   Simon Glass
• [U-Boot] buildman: selection question   Simon Glass
• [U-Boot] Please pull u-boot-x86.git branch patman   Simon Glass
• [U-Boot] [PATCH v10 0/14] Add some missing buildman features and deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v10 01/14] patman: Support the 'reverse' option for 'git log'   Simon Glass
• [U-Boot] [PATCH v10 02/14] patman: Fix indentation in terminal.py   Simon Glass
• [U-Boot] [PATCH v10 03/14] patman: Correct unit tests to run correctly   Simon Glass
• [U-Boot] [PATCH v10 04/14] patman: Remove the -a option   Simon Glass
• [U-Boot] [PATCH v10 05/14] patman: Use --no-pager' to stop git from forking a pager   Simon Glass
• [U-Boot] [PATCH v10 06/14] patman: Avoid changing the order of tags   Simon Glass
• [U-Boot] [PATCH v10 07/14] buildman: Set the return code to indicate build result   Simon Glass
• [U-Boot] [PATCH v10 08/14] buildman: Allow make-flags variables to include '-' and '_'   Simon Glass
• [U-Boot] [PATCH v10 09/14] buildman: Implement an option to exclude boards from the build   Simon Glass
• [U-Boot] [PATCH v10 10/14] buildman: Remove the directory prefix from each error line   Simon Glass
• [U-Boot] [PATCH v10 11/14] buildman: Add an option to show which boards caused which errors   Simon Glass
• [U-Boot] [PATCH v10 12/14] buildman: Separate out display of warnings and errors   Simon Glass
• [U-Boot] [PATCH v10 13/14] patman: Fix detection of git version   Simon Glass
• [U-Boot] [PATCH v10 14/14] RFC: Deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v2 0/16] buildman: Expand test coverage   Simon Glass
• [U-Boot] [PATCH v2 01/16] patman: Add a way of recording terminal output for testing   Simon Glass
• [U-Boot] [PATCH v2 02/16] buildman: Send builder output through a function for testing   Simon Glass
• [U-Boot] [PATCH v2 03/16] buildman: Enhance basic test to check summary output   Simon Glass
• [U-Boot] [PATCH v2 04/16] patman: RunPipe() should not pipe stdout/stderr unless asked   Simon Glass
• [U-Boot] [PATCH v2 05/16] buildman: Move the command line code into its own file   Simon Glass
• [U-Boot] [PATCH v2 06/16] buildman: Move full help code into the control module   Simon Glass
• [U-Boot] [PATCH v2 07/16] patman: Provide a way to intercept commands for testing   Simon Glass
• [U-Boot] [PATCH v2 08/16] buildman: Add a functional test   Simon Glass
• [U-Boot] [PATCH v2 09/16] buildman: Set up bsettings outside the control module   Simon Glass
• [U-Boot] [PATCH v2 10/16] buildman: Avoid looking at config file or toolchains in tests   Simon Glass
• [U-Boot] [PATCH v2 11/16] buildman: Allow tests to have their own boards   Simon Glass
• [U-Boot] [PATCH v2 12/16] buildman: Correct counting of build failures on retry   Simon Glass
• [U-Boot] [PATCH v2 13/16] buildman: Provide an internal option to clean the outpur dir   Simon Glass
• [U-Boot] [PATCH v2 14/16] patman: Start with a clean series when needed   Simon Glass
• [U-Boot] [PATCH v2 15/16] buildman: Add additional functional tests   Simon Glass
• [U-Boot] [PATCH v2 16/16] buildman: Expand output test to cover directory prefixes   Simon Glass
• [U-Boot] buildman: suspect issue with patman tags   Simon Glass
• [U-Boot] [PATCH 06/25] dm: spi: Add a uclass for SPI   Simon Glass
• [U-Boot] [PATCH] pxe: automatically add console= to bootargs when not specified in append   Hans de Goede
• [U-Boot] [PATCH 1/7] sunxi-common.h: Remove CONFIG_SYS_BOOT_GET_CMDLINE   Hans de Goede
• [U-Boot] [PATCH 2/7] sunxi-common.h: Remove dead #ifdef CONFIG_CMD_NET code block   Hans de Goede
• [U-Boot] [PATCH 3/7] sunxi-common.h: Don't undefine CONFIG_CMD_NFS   Hans de Goede
• [U-Boot] [PATCH 4/7] sunxi-common.h: Don't undef CONFIG_CMD_NET only to redefine it again later   Hans de Goede
• [U-Boot] [PATCH 5/7] sunxi-common.h: Use new generic $bootcmd   Hans de Goede
• [U-Boot] [PATCH 6/7] sunxi: Kconfig: move common settings into a shared code block   Hans de Goede
• [U-Boot] [PATCH 7/7] sunxi: Add environment settings to make extlinux.conf booting work   Hans de Goede
• [U-Boot] [PATCH 5/7] sunxi-common.h: Use new generic $bootcmd   Hans de Goede
• [U-Boot] [PATCH] pxe: automatically add console= to bootargs when not specified in append   Hans de Goede
• [U-Boot] [PATCH] pxe: automatically add console= to bootargs when not specified in append   Hans de Goede
• [U-Boot] [PATCH] pxe: Allow use of environment variables in append string   Hans de Goede
• [U-Boot] [PATCH] video: add cfb console driver for sunxi   Hans de Goede
• [U-Boot] Quick guide to Kconfig   Hans de Goede
• [U-Boot] [PATCH] pxe: Allow use of environment variables in append string   Hans de Goede
• [U-Boot] [PATCH 5/7] sunxi-common.h: Use new generic $bootcmd   Hans de Goede
• [U-Boot] [PATCH 7/7] sunxi: Add environment settings to make extlinux.conf booting work   Hans de Goede
• [U-Boot] [PATCH 7/7] sunxi: Add environment settings to make extlinux.conf booting work   Hans de Goede
• [U-Boot] [PATCH v2 00/16] sunxi: Allwinner A10/A13/A20 DRAM controller fixes   Hans de Goede
• [U-Boot] [PATCH] video: add cfb console driver for sunxi   Hans de Goede
• [U-Boot] [PATCH v2 0/2] pxe: Allow use of environment variables in append   Hans de Goede
• [U-Boot] [PATCH v2 1/2] cli: Export cli_simple_process_macros for use outside of cli_simple   Hans de Goede
• [U-Boot] [PATCH v2 2/2] pxe: Allow use of environment variables in append string   Hans de Goede
• [U-Boot] [linux-sunxi] [PATCH] video: add cfb console driver for sunxi   Hans de Goede
• [U-Boot] [PATCH] video: add cfb console driver for sunxi   Hans de Goede
• [U-Boot] [PATCH 0/2] sunxi: Single u-boot binary for Allwinner A10/A13/A20 devices   Hans de Goede
• [U-Boot] [PATCH 1/2] sunxi: Replace CONFIG_SUN[457]I ifdefs with SOC_IS_SUN[457]I() calls   Hans de Goede
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Hans de Goede
• [U-Boot] [RFC/PATCH] sunxi: Populate the default environment for sunxi-based systems   Hans de Goede
• [U-Boot] mini summit talk proposal: "Getting SoC vendors to work with upstream u-boot"   Hans de Goede
• [U-Boot] Please pull u-boot-sunxi.git/master   Hans de Goede
• [U-Boot] [PATCH] sun7i: Add support for Olimex A20-OLinuXino-LIME   Hans de Goede
• [U-Boot] Sending a pull-req for pulling u-boot-arm into u-boot master   Hans de Goede
• [U-Boot] [PATCH] sun7i: Add support for Olimex A20-OLinuXino-LIME   Hans de Goede
• [U-Boot] Should ARM custodian tree pull-reqs still go through the ARM tree ?   Hans de Goede
• [U-Boot] Please pull u-boot-sunxi.git/master   Hans de Goede
• [U-Boot] Please pull u-boot-arm/master   Hans de Goede
• [U-Boot] Current ARM imports TODO list   Hans de Goede
• [U-Boot] [PATCH 7/7] sunxi: Add environment settings to make extlinux.conf booting work   Hans de Goede
• [U-Boot] [PATCH] sbc8548: enable and test CONFIG_SYS_GENERIC_BOARD   Paul Gortmaker
• [U-Boot] [PATCH]usb: eth: add ASIX AX88179 DRIVER   Rene Griessl
• [U-Boot] [PATCH]usb: eth: add ASIX AX88179 DRIVER   Rene Griessl
• [U-Boot] [PATCH 18/18] arm: mx6: cm_fx6: add sata support   Igor Grinberg
• [U-Boot] [PATCH 18/18] arm: mx6: cm_fx6: add sata support   Igor Grinberg
• [U-Boot] [RFC PATCH v2 0/2] Make Python scripts compatible with older versions   Igor Grinberg
• [U-Boot] [RFC PATCH v2 0/2] Make Python scripts compatible with older versions   Igor Grinberg
• [U-Boot] [PATCH] tools, scripts: refactor error-out statements of Python scripts   Igor Grinberg
• [U-Boot] [RFC PATCH v2 0/2] Make Python scripts compatible with older versions   Igor Grinberg
• [U-Boot] [PATCH V2 2/9] mx6: add clock enabling functions   Igor Grinberg
• [U-Boot] [RFC PATCH v2 0/2] Make Python scripts compatible with older versions   Igor Grinberg
• [U-Boot] [PATCH V2 00/18] Introduce cm-fx6 board (partial V2 cont.)   Igor Grinberg
• [U-Boot] [RFC PATCH v2 0/2] Make Python scripts compatible with older versions   Igor Grinberg
• [U-Boot] [PATCH V3 2/9] mx6: add clock enabling functions   Igor Grinberg
• [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Igor Grinberg
• [U-Boot] Confusion when starting storage subsystems   Igor Grinberg
• [U-Boot] [RFC PATCH v2 0/2] Make Python scripts compatible with older versions   Igor Grinberg
• [U-Boot] [PATCH V2 10/18] arm: mx6: ddr: configure MMDC for slow_pd   Igor Grinberg
• [U-Boot] Newbies list?   Igor Grinberg
• [U-Boot] Newbies list?   Igor Grinberg
• [U-Boot] [PATCH V3 12/18] arm: mx6: add support for Compulab cm-fx6 CoM   Igor Grinberg
• [U-Boot] [PATCH V2 14/18] arm: mx6: cm_fx6: add ethernet support   Igor Grinberg
• [U-Boot] [PATCH V2 15/18] arm: mx6: cm_fx6: add usb support   Igor Grinberg
• [U-Boot] [PATCH V2 13/18] arm: mx6: cm_fx6: add nand support   Igor Grinberg
• [U-Boot] [PATCH V2 16/18] arm: mx6: cm_fx6: add i2c support   Igor Grinberg
• [U-Boot] [PATCH V2 17/18] arm: mx6: cm_fx6: use eeprom   Igor Grinberg
• [U-Boot] [PATCH V2 18/18] arm: mx6: cm_fx6: add sata support   Igor Grinberg
• [U-Boot] [PATCH V3 12/18] arm: mx6: add support for Compulab cm-fx6 CoM   Igor Grinberg
• [U-Boot] [PATCH 0/3] cm-t54: misc board fixes, convert to generic board   Igor Grinberg
• [U-Boot] [PATCH v2] kconfig: convert Kconfig helper script into a shell script   Igor Grinberg
• [U-Boot] [PATCH] lcd: Add support for CONFIG_LCD_NOSTDOUT   Anatolij Gustschin
• [U-Boot] [PATCH v2] Add support for 32-bit organized framebuffers   Anatolij Gustschin
• [U-Boot] [PATCH] lcd: cleanup unused functions   Anatolij Gustschin
• [U-Boot] [PATCH] video: Add support for TI's AM335x LCD-Controller   Anatolij Gustschin
• [U-Boot] [PATCH] video: ipu_disp: wait for DP SF end irq when disabling sync BG flows   Anatolij Gustschin
• [U-Boot] [[PATCH v2]] video: ipu_disp: squash clang warning   Anatolij Gustschin
• [U-Boot] Pull request: u-boot-video/master   Anatolij Gustschin
• [U-Boot] [PATCH] tools: fix typo in tools/image-host.c   Anatolij Gustschin
• [U-Boot] [PATCH] tools, fit_info: increase buffer for command name   Anatolij Gustschin
• [U-Boot] [PATCH] mx6: Fix ECSPI typo in soc_boot_modes   Anatolij Gustschin
• [U-Boot] [PATCH] pci: fix overflow in __pci_hose_bus_to_phys w/ large RAM   Anatolij Gustschin
• [U-Boot] [PATCH] mkimage: fix compilation issues on OpenBSD   Anatolij Gustschin
• [U-Boot] [PATCH 1/3] README: document CONFIG_BOARD_SIZE_LIMIT   Anatolij Gustschin
• [U-Boot] [PATCH 3/3] openrd: fail build if U-Boot would overlap with environment in flash   Anatolij Gustschin
• [U-Boot] [PATCH 2/3] Makefile: check native boot image sizes against CONFIG_BOARD_SIZE_LIMIT   Anatolij Gustschin
• [U-Boot] Pull request: u-boot-staging   Anatolij Gustschin
• [U-Boot] [PATCH 07/18] i2c: imx: add macros to setup pads for multiple SoC types   Tim Harvey
• [U-Boot] [PATCH 12/18] arm: mx6: add support for Compulab cm-fx6 CoM   Tim Harvey
• [U-Boot] [PATCH 2/4] ARM: mx6: Prevent overflow in DRAM size detection   Tim Harvey
• [U-Boot] [PATCH 08/18] arm: mx6: ddr: cleanup   Tim Harvey
• [U-Boot] [PATCH 10/18] arm: mx6: ddr: configure MMDC for slow_pd   Tim Harvey
• [U-Boot] [PATCH 09/18] arm: mx6: ddr: do not write into reserved bit   Tim Harvey
• [U-Boot] [PATCH 12/18] arm: mx6: add support for Compulab cm-fx6 CoM   Tim Harvey
• [U-Boot] [PATCH 09/18] arm: mx6: ddr: do not write into reserved bit   Tim Harvey
• [U-Boot] [PATCH 4/4] ARM: mx6: Enable Thumb build for SPL   Tim Harvey
• [U-Boot] [PATCH 00/11] imx: ventana: misc patches   Tim Harvey
• [U-Boot] [PATCH 01/11] imx: ventana: set dynamic env var for flash layout   Tim Harvey
• [U-Boot] [PATCH 02/11] imx: ventana: added cputype env var   Tim Harvey
• [U-Boot] [PATCH 03/11] imx: ventana: remove caam disable per eeprom bit   Tim Harvey
• [U-Boot] [PATCH 04/11] imx: ventana: add appropriate delay following GSC i2c write   Tim Harvey
• [U-Boot] [PATCH 05/11] imx: ventana: add econfig command   Tim Harvey
• [U-Boot] [PATCH 06/11] imx: ventana: add video enable gpio pinmux for GW54xx   Tim Harvey
• [U-Boot] [PATCH 07/11] imx: ventana: add missing crlf to print   Tim Harvey
• [U-Boot] [PATCH 08/11] imx: ventana: configure i2c_dis# pin properly for gw53xx   Tim Harvey
• [U-Boot] [PATCH 09/11] imx: ventana: enable SION bit on gpio outputs   Tim Harvey
• [U-Boot] [PATCH 10/11] imx: ventana: add iomux for PCISKT_WDIS# gpio   Tim Harvey
• [U-Boot] [PATCH 11/11] imx: ventana: leave PCI reset de-asserted if PCI enabled   Tim Harvey
• [U-Boot] [PATCH 0/2] imx: ventana: Add pci fixup for PLX switch   Tim Harvey
• [U-Boot] [PATCH 1/2] pci: add support for board_pci_fixup_dev function   Tim Harvey
• [U-Boot] [PATCH 2/2] imx: ventana: add pci fixup for PLX PEX860x switch GPIO   Tim Harvey
• [U-Boot] [PATCH] pci: mx6: fix occasional link failures   Tim Harvey
• [U-Boot] [PATCH 12/18] arm: mx6: add support for Compulab cm-fx6 CoM   Tim Harvey
• [U-Boot] [PATCH 0/2] e1000: add i210 support   Tim Harvey
• [U-Boot] [PATCH 1/2] e1000: Implement dcache support   Tim Harvey
• [U-Boot] [PATCH 2/2] e1000: add i210 support   Tim Harvey
• [U-Boot] mx6: spl: Rename ncs as ranks and move it to mx6_ddr3_cfg   Tim Harvey
• [U-Boot] [PATCH 02/11] imx: ventana: added cputype env var   Tim Harvey
• [U-Boot] [PATCH] imx: ventana: updated notes regarding NAND boot errata   Tim Harvey
• [U-Boot] [PATCH] imx: ventana: base SPL MMDC calibration on width and size not board   Tim Harvey
• [U-Boot] [PATCH] imx: ventana: add GW5520 support   Tim Harvey
• [U-Boot] [PATCH 0/2] imx: ventana: Add pci fixup for PLX switch   Tim Harvey
• [U-Boot] [PATCH 0/2] e1000: add i210 support   Tim Harvey
• [U-Boot] [PATCH] imx: ventana: Avoid undefined behaviour   Tim Harvey
• [U-Boot] [PATCH V4 10/19] arm: mx6: ddr: configure MMDC for slow_pd   Tim Harvey
• [U-Boot] [PATCH v2 1/4] usb/gadget: fastboot: add sparse image definitions   Rob Herring
• [U-Boot] [PATCH] net: BOOTP retry timeout improvements   Joe Hershberger
• [U-Boot] [PATCH] net: More BOOTP retry timeout improvements   Joe Hershberger
• [U-Boot] [PATCH] kconfig: Fix compiler warning in menu.c   Jeroen Hofstee
• [U-Boot] [PATCH] Makefile: restore *_config target   Jeroen Hofstee
• [U-Boot] [PATCH 2/2] fastboot: Flash command support   Jeroen Hofstee
• [U-Boot] [PATCH 2/2] fastboot: Flash command support   Jeroen Hofstee
• [U-Boot] [PATCH] Makefile: restore *_config target   Jeroen Hofstee
• [U-Boot] [PATCH] Makefile: restore *_config target   Jeroen Hofstee
• [U-Boot] [PATCH v3 14/16] tegra: dts: Add serial port details   Jeroen Hofstee
• [U-Boot] SPL broken on i.mx31 platforms   Jeroen Hofstee
• [U-Boot] [PATCH v2 0/3] Add some missing buildman features and deprecate MAKEALL   Jeroen Hofstee
• [U-Boot] [PATCH v4 11/13] buildman: Search for *cc instead of *gcc for the compiler   Jeroen Hofstee
• [U-Boot] hw_watchdog   Jeroen Hofstee
• [U-Boot] [PATCH] Makefile: restore *_config target   Jeroen Hofstee
• [U-Boot] Python subprocess module missing in multiconfig.py   Jeroen Hofstee
• [U-Boot] Python subprocess module missing in multiconfig.py   Jeroen Hofstee
• [U-Boot] Python subprocess module missing in multiconfig.py   Jeroen Hofstee
• [U-Boot] Python subprocess module missing in multiconfig.py   Jeroen Hofstee
• [U-Boot] [PATCH] Makefile: restore *_config target   Jeroen Hofstee
• [U-Boot] Removing the need for boards.cfg   Jeroen Hofstee
• [U-Boot] [PATCH v4 4/5] usb/gadget: fastboot: add sparse image definitions   Jeroen Hofstee
• [U-Boot] [PATCH v4 4/5] usb/gadget: fastboot: add sparse image definitions   Jeroen Hofstee
• [U-Boot] [PATCH v4 4/5] usb/gadget: fastboot: add sparse image definitions   Jeroen Hofstee
• [U-Boot] Python subprocess module missing in multiconfig.py   Jeroen Hofstee
• [U-Boot] Add CONFIG_API to config_distribution   Jeroen Hofstee
• [U-Boot] [PATCH 1/2] api: fix build without CMD_NET support   Jeroen Hofstee
• [U-Boot] [PATCH 2/2] config_distro_defaults.h: add CONFIG_API   Jeroen Hofstee
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Jeroen Hofstee
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Jeroen Hofstee
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Jeroen Hofstee
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Jeroen Hofstee
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Jeroen Hofstee
• [U-Boot] [PATCH 2/3] image: move all function comments to header file   Jeroen Hofstee
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Alexander Holler
• [U-Boot] Confusion when starting storage subsystems   Alexander Holler
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Alexander Holler
• [U-Boot] Magically determining the correct root   Alexander Holler
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Alexander Holler
• [U-Boot] USB console support for Cypress   Hristozov, Anton
• [U-Boot] [UBOOT RFC PATCH 00/13] DRA7xx: Add DWC3 USB driver and enable DFU   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 01/13] include: linux: preparation for porting dwc3 from linux kernel   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 02/13] usb: gadget: udc-core: Add minimal udc-core from linux kernel   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 03/13] ARM: DRA7: Enable clocks for USB OTGSS and USB PHY   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 04/13] usb: dwc3: Add dwc3 driver   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 05/13] usb: dwc3-omap: Add dwc3 glue driver for OMAP   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 06/13] usb: dwc3: TI PHY: PHY driver for dwc3 in TI platforms   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 07/13] usb: gadget: g_dnl: Explicitly set the max packet size in descriptor   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 08/13] common: cmd_dfu: invoke board_usb_cleanup() for cleaning up   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 09/13] common: cmd_dfu: add an API that takes controller index for handling interrupts   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 10/13] board: ti: DRA7: added USB initializtion code   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 11/13] commom: usb: implement "__weak" functions to make compiler happy   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 12/13] include: configs: Enable DWC3 and DFU in DRA7xx   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 13/13] dwc3: core: Change the bounce buffer size to 4096   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 02/13] usb: gadget: udc-core: Add minimal udc-core from linux kernel   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 02/13] usb: gadget: udc-core: Add minimal udc-core from linux kernel   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 04/13] usb: dwc3: Add dwc3 driver   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 07/13] usb: gadget: g_dnl: Explicitly set the max packet size in descriptor   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 07/13] usb: gadget: g_dnl: Explicitly set the max packet size in descriptor   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 07/13] usb: gadget: g_dnl: Explicitly set the max packet size in descriptor   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 07/13] usb: gadget: g_dnl: Explicitly set the max packet size in descriptor   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 02/13] usb: gadget: udc-core: Add minimal udc-core from linux kernel   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 09/13] common: cmd_dfu: add an API that takes controller index for handling interrupts   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 10/13] board: ti: DRA7: added USB initializtion code   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 11/13] commom: usb: implement "__weak" functions to make compiler happy   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 13/13] dwc3: core: Change the bounce buffer size to 4096   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 10/13] board: ti: DRA7: added USB initializtion code   Kishon Vijay Abraham I
• [U-Boot] [UBOOT RFC PATCH 13/13] dwc3: core: Change the bounce buffer size to 4096   Kishon Vijay Abraham I
• [U-Boot] Newbies list?   Frank Ihle
• [U-Boot] [PATCH 1/6] arm: rmobile: koelsch: Update QoS initialization to version 0.334   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/6] arm: rmobile: alt: Update QoS initialization to version 0.11   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/6] arm: rmobile: lager: Update Qos setting to version 0.955   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 4/6] arm: rmobile: lager: Add Qos setting for ES2   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 5/6] arm: rmobile: lager: Fix CPU frequency setting   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 6/6] arm: rmobile: Remove unnecessary initialization for l2ctlr   Nobuhiro Iwamatsu
• [U-Boot] Pull request: u-boot-sh/master   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/2] arm: rmobile: r8a7791: Fix initialize L2 cache   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/2] arm: rmobile: r8a7794: Skip initialize L2 cache   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/3] stv0991 : Add basic stv0991 architecture support.   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] cosmetic: mconf.c: remove texts referring to modules   Maxin B. John
• [U-Boot] [PATCH] cosmetic: mconf.c: remove texts referring to modules   Maxin B. John
• [U-Boot] [PATCH v2 07/15] exynos: kconfig: move board select menu and common settings   Minkyu Kang
• [U-Boot] [PATCH] samsung: dfu: Provide correct Vendor and Product IDs for UMS gadget   Minkyu Kang
• [U-Boot] [PATCH] samsung: dfu: Provide correct Vendor and Product IDs for UMS gadget   Minkyu Kang
• [U-Boot] [PATCH] samsung: s5p_goni: fix: Add missing definitions for G_DNL_UMS gadget   Minkyu Kang
• [U-Boot] [PATCH V4 0/9] peach_pit: Add support for FIMD, DP and parade chip   Minkyu Kang
• [U-Boot] [PATCH 1/2] arm: BeagleBone Black: enable fastboot support   Dileep Katta
• [U-Boot] [PATCH 2/2] fastboot: Flash command support   Dileep Katta
• [U-Boot] [PATCH 2/2] fastboot: Flash command support   Dileep Katta
• [U-Boot] [PATCH 1/2 v2] arm: BeagleBone Black: enable fastboot support   Dileep Katta
• [U-Boot] [PATCH 2/2 v2] fastboot: Flash command support   Dileep Katta
• [U-Boot] [U-boot] [Patch] ARM: keystone: clock: use correct BWADJ field mask for PASSPLLCTL0   Ivan Khoronzhuk
• [U-Boot] [U-Boot, U-boot, v3, 1/3] mtd: nand: davinci: allow to change ecclayout by ecclayout command   Ivan Khoronzhuk
• [U-Boot] [U-Boot, U-boot, v3, 2/3] common: cmd_nand: add nand ecclayout command   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch] keystone2: use readl/writel functions instead of redefinition   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 0/4] keystone2: generalize navigator driver usage   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 1/4] keystone2: keystone_nav: don't use hard addresses in qm_config   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 2/4] keystone2: keystone_nav: don't use hard addresses in netcp_pktdma   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 3/4] dma: keystone_nav: move keystone_nav driver to driver/dma/   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 4/4] dma: keystone_nav: generalize driver usage   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch] keystone: usb: add support of usb xhci   Ivan Khoronzhuk
• [U-Boot] [PATCH 00/18] Introduce cm-fx6 board   Nikita Kiryanov
• [U-Boot] [PATCH 01/18] spl: improve spi configuration   Nikita Kiryanov
• [U-Boot] [PATCH 02/18] mx6: add clock enabling functions   Nikita Kiryanov
• [U-Boot] [PATCH 03/18] sf: fix sf probe   Nikita Kiryanov
• [U-Boot] [PATCH 04/18] mtd: spi: add support for M25PE16 and M25PX16   Nikita Kiryanov
• [U-Boot] [PATCH 05/18] compulab: eeprom: add support for defining eeprom i2c bus   Nikita Kiryanov
• [U-Boot] [PATCH 06/18] sata: dwc_ahsata: implement sata_port_status   Nikita Kiryanov
• [U-Boot] [PATCH 07/18] i2c: imx: add macros to setup pads for multiple SoC types   Nikita Kiryanov
• [U-Boot] [PATCH 08/18] arm: mx6: ddr: cleanup   Nikita Kiryanov
• [U-Boot] [PATCH 09/18] arm: mx6: ddr: do not write into reserved bit   Nikita Kiryanov
• [U-Boot] [PATCH 10/18] arm: mx6: ddr: configure MMDC for slow_pd   Nikita Kiryanov
• [U-Boot] [PATCH 11/18] arm: mx6: ddr: fix cs0_end calculation   Nikita Kiryanov
• [U-Boot] [PATCH 12/18] arm: mx6: add support for Compulab cm-fx6 CoM   Nikita Kiryanov
• [U-Boot] [PATCH 13/18] arm: mx6: cm_fx6: add nand support   Nikita Kiryanov
• [U-Boot] [PATCH 14/18] arm: mx6: cm_fx6: add ethernet support   Nikita Kiryanov
• [U-Boot] [PATCH 15/18] arm: mx6: cm_fx6: add usb support   Nikita Kiryanov
• [U-Boot] [PATCH 16/18] arm: mx6: cm_fx6: add i2c support   Nikita Kiryanov
• [U-Boot] [PATCH 17/18] arm: mx6: cm_fx6: use eeprom   Nikita Kiryanov
• [U-Boot] [PATCH 18/18] arm: mx6: cm_fx6: add sata support   Nikita Kiryanov
• [U-Boot] [PATCH 03/18] sf: fix sf probe   Nikita Kiryanov
• [U-Boot] [PATCH 05/18] compulab: eeprom: add support for defining eeprom i2c bus   Nikita Kiryanov
• [U-Boot] [PATCH 09/18] arm: mx6: ddr: do not write into reserved bit   Nikita Kiryanov
• [U-Boot] [PATCH 10/18] arm: mx6: ddr: configure MMDC for slow_pd   Nikita Kiryanov
• [U-Boot] [PATCH 06/18] sata: dwc_ahsata: implement sata_port_status   Nikita Kiryanov
• [U-Boot] [PATCH 12/18] arm: mx6: add support for Compulab cm-fx6 CoM   Nikita Kiryanov
• [U-Boot] [PATCH 03/18] sf: fix sf probe   Nikita Kiryanov
• [U-Boot] [PATCH 03/18] sf: fix sf probe   Nikita Kiryanov
• [U-Boot] [PATCH 03/18] sf: fix sf probe   Nikita Kiryanov
• [U-Boot] [PATCH 12/18] arm: mx6: add support for Compulab cm-fx6 CoM   Nikita Kiryanov
• [U-Boot] [PATCH 12/18] arm: mx6: add support for Compulab cm-fx6 CoM   Nikita Kiryanov
• [U-Boot] [PATCH 12/18] arm: mx6: add support for Compulab cm-fx6 CoM   Nikita Kiryanov
• [U-Boot] [PATCH 01/18] spl: improve spi configuration   Nikita Kiryanov
• [U-Boot] [PATCH 01/18] spl: improve spi configuration   Nikita Kiryanov
• [U-Boot] [PATCH 12/18] arm: mx6: add support for Compulab cm-fx6 CoM   Nikita Kiryanov
• [U-Boot] [PATCH 12/18] arm: mx6: add support for Compulab cm-fx6 CoM   Nikita Kiryanov
• [U-Boot] [PATCH V2 0/9] Introduce cm-fx6 board (partial V2)   Nikita Kiryanov
• [U-Boot] [PATCH V2 1/9] spl: replace CONFIG_SPL_SPI_* with CONFIG_SF_DEFAULT_*   Nikita Kiryanov
• [U-Boot] [PATCH V2 2/9] mx6: add clock enabling functions   Nikita Kiryanov
• [U-Boot] [PATCH V2 3/9] spi: mxc: fix sf probe when using mxc_spi   Nikita Kiryanov
• [U-Boot] [PATCH V2 4/9] mtd: spi: add support for M25PE16 and M25PX16   Nikita Kiryanov
• [U-Boot] [PATCH V2 5/9] compulab: eeprom: add support for defining eeprom i2c bus   Nikita Kiryanov
• [U-Boot] [PATCH V2 6/9] sata: dwc_ahsata: implement sata_port_status   Nikita Kiryanov
• [U-Boot] [PATCH V2 7/9] i2c: imx: add macros to setup pads for multiple SoC types   Nikita Kiryanov
• [U-Boot] [PATCH V2 8/9] arm: mx6: ddr: cleanup   Nikita Kiryanov
• [U-Boot] [PATCH V2 9/9] arm: mx6: ddr: do not write into reserved bit   Nikita Kiryanov
• [U-Boot] [PATCH V2 1/9] spl: replace CONFIG_SPL_SPI_* with CONFIG_SF_DEFAULT_*   Nikita Kiryanov
• [U-Boot] [PATCH 12/18] arm: mx6: add support for Compulab cm-fx6 CoM   Nikita Kiryanov
• [U-Boot] [PATCH V2 00/18] Introduce cm-fx6 board (partial V2 cont.)   Nikita Kiryanov
• [U-Boot] [PATCH V2 10/18] arm: mx6: ddr: configure MMDC for slow_pd   Nikita Kiryanov
• [U-Boot] [PATCH V2 11/18] arm: mx6: ddr: fix cs0_end calculation   Nikita Kiryanov
• [U-Boot] [PATCH V2 12/18] arm: mx6: add support for Compulab cm-fx6 CoM   Nikita Kiryanov
• [U-Boot] [PATCH V2 13/18] arm: mx6: cm_fx6: add nand support   Nikita Kiryanov
• [U-Boot] [PATCH V2 14/18] arm: mx6: cm_fx6: add ethernet support   Nikita Kiryanov
• [U-Boot] [PATCH V2 15/18] arm: mx6: cm_fx6: add usb support   Nikita Kiryanov
• [U-Boot] [PATCH V2 16/18] arm: mx6: cm_fx6: add i2c support   Nikita Kiryanov
• [U-Boot] [PATCH V2 17/18] arm: mx6: cm_fx6: use eeprom   Nikita Kiryanov
• [U-Boot] [PATCH V2 18/18] arm: mx6: cm_fx6: add sata support   Nikita Kiryanov
• [U-Boot] [PATCH V2 2/9] mx6: add clock enabling functions   Nikita Kiryanov
• [U-Boot] [PATCH V2 00/18] Introduce cm-fx6 board (partial V2 cont.)   Nikita Kiryanov
• [U-Boot] [PATCH V3 2/9] mx6: add clock enabling functions   Nikita Kiryanov
• [U-Boot] [PATCH V2 00/18] Introduce cm-fx6 board (partial V2 cont.)   Nikita Kiryanov
• [U-Boot] [PATCH V3 12/18] arm: mx6: add support for Compulab cm-fx6 CoM   Nikita Kiryanov
• [U-Boot] [PATCH V3 12/18] arm: mx6: add support for Compulab cm-fx6 CoM   Nikita Kiryanov
• [U-Boot] [PATCH V2 15/18] arm: mx6: cm_fx6: add usb support   Nikita Kiryanov
• [U-Boot] [PATCH V2 18/18] arm: mx6: cm_fx6: add sata support   Nikita Kiryanov
• [U-Boot] [PATCH V3 12/18] arm: mx6: add support for Compulab cm-fx6 CoM   Nikita Kiryanov
• [U-Boot] [PATCH V3 12/18] arm: mx6: add support for Compulab cm-fx6 CoM   Nikita Kiryanov
• [U-Boot] [PATCH V3 12/18] arm: mx6: add support for Compulab cm-fx6 CoM   Nikita Kiryanov
• [U-Boot] [PATCH V4 00/19] Introduce cm-fx6 board   Nikita Kiryanov
• [U-Boot] [PATCH V4 01/19] spl: replace CONFIG_SPL_SPI_* with CONFIG_SF_DEFAULT_*   Nikita Kiryanov
• [U-Boot] [PATCH V4 02/19] mx6: add clock enabling functions   Nikita Kiryanov
• [U-Boot] [PATCH V4 03/19] spi: mxc: fix sf probe when using mxc_spi   Nikita Kiryanov
• [U-Boot] [PATCH V4 04/19] mtd: spi: add support for M25PE16 and M25PX16   Nikita Kiryanov
• [U-Boot] [PATCH V4 05/19] compulab: eeprom: add support for defining eeprom i2c bus   Nikita Kiryanov
• [U-Boot] [PATCH V4 06/19] sata: dwc_ahsata: implement sata_port_status   Nikita Kiryanov
• [U-Boot] [PATCH V4 07/19] i2c: imx: add macros to setup pads for multiple SoC types   Nikita Kiryanov
• [U-Boot] [PATCH V4 08/19] arm: mx6: ddr: cleanup   Nikita Kiryanov
• [U-Boot] [PATCH V4 09/19] arm: mx6: ddr: do not write into reserved bit   Nikita Kiryanov
• [U-Boot] [PATCH V4 10/19] arm: mx6: ddr: configure MMDC for slow_pd   Nikita Kiryanov
• [U-Boot] [PATCH V4 11/19] arm: mx6: ddr: fix cs0_end calculation   Nikita Kiryanov
• [U-Boot] [PATCH V4 12/19] arm: mx6: add get_cpu_type()   Nikita Kiryanov
• [U-Boot] [PATCH V4 13/19] arm: mx6: add support for Compulab cm-fx6 CoM   Nikita Kiryanov
• [U-Boot] [PATCH V4 14/19] arm: mx6: cm_fx6: add nand support   Nikita Kiryanov
• [U-Boot] [PATCH V4 15/19] arm: mx6: cm_fx6: add ethernet support   Nikita Kiryanov
• [U-Boot] [PATCH V4 16/19] arm: mx6: cm_fx6: add usb support   Nikita Kiryanov
• [U-Boot] [PATCH V4 17/19] arm: mx6: cm_fx6: add i2c support   Nikita Kiryanov
• [U-Boot] [PATCH V4 18/19] arm: mx6: cm_fx6: use eeprom   Nikita Kiryanov
• [U-Boot] [PATCH V4 19/19] arm: mx6: cm_fx6: add sata support   Nikita Kiryanov
• [U-Boot] [PATCH V4 10/19] arm: mx6: ddr: configure MMDC for slow_pd   Nikita Kiryanov
• [U-Boot] [PATCH V4 00/19] Introduce cm-fx6 board   Nikita Kiryanov
• [U-Boot] uboot imx-usb-loader   Troy Kisky
• [U-Boot] [linux-sunxi] [PATCH] video: add cfb console driver for sunxi   Koen Kooi
• [U-Boot] tarball for 2014.10-rc1   Matwey V. Kornilov
• [U-Boot] tools-only build broken   Matwey V. Kornilov
• [U-Boot] [PATCH] ARM: non-sec: Add spin table reserved memory support   Xiubo Li
• [U-Boot] [PATCH v2 2/2] net: fec_mxc: Do not error out when FEC_TBD_READY   Ye Li
• [U-Boot] SPL broken on i.mx31 platforms   Magnus Lilja
• [U-Boot] SPL broken on i.mx31 platforms   Magnus Lilja
• [U-Boot] [PATCH] i.MX31 PDK: Enable generic board for i.MX31 PDK   Magnus Lilja
• [U-Boot] SPL broken on i.mx31 platforms   Magnus Lilja
• [U-Boot] Driver Model and DTS Parsing   Jon Loeliger
• [U-Boot] [PATCH v3 07/16] sandbox: dts: Add a serial console node   Jon Loeliger
• [U-Boot] [PATCH v5 05/11] exynos: dts: Adjust device tree files for U-Boot   Jon Loeliger
• [U-Boot] CPU Wachtog for P2041   Valentin Longchamp
• [U-Boot] [PATCH] km-powerpc: define CONFIG_PRAM to protect PHRAM and PNVRAM   Valentin Longchamp
• [U-Boot] [PATCH] kmp204x: set the ZL clk chips reset to power up only   Valentin Longchamp
• [U-Boot] [PATCH v2] kmp204x: reset the Zarlink clocking chips at power up only   Valentin Longchamp
• [U-Boot] [PATCH v2] km-powerpc: define CONFIG_PRAM to protect PHRAM and PNVRAM   Valentin Longchamp
• [U-Boot] [PATCH v2] kmp204x: reset the Zarlink clocking chips at power up only   Valentin Longchamp
• [U-Boot] [PATCH v3] kmp204x: reset the Zarlink clocking chips at power up only   Valentin Longchamp
• [U-Boot] [GENERIC_BOARD] env problems before relocation with ppc8360   Valentin Longchamp
• [U-Boot] [GENERIC_BOARD] env problems before relocation with ppc8360   Valentin Longchamp
• [U-Boot] [PATCH v3] powerpc/85xx: enable some P1/P2 boards mtdparts for nor flash   Yangbo Lu
• [U-Boot] socfpga: immediate hang when accessing memory at 0x10000   Pavel Machek
• [U-Boot] socfpga: fix clock manager register definition   Pavel Machek
• [U-Boot] [GIT] Pull request: u-boot-dfu   Lukasz Majewski
• [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Lukasz Majewski
• [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Lukasz Majewski
• [U-Boot] Newbies list?   Lukasz Majewski
• [U-Boot] thor integration with ci_udc   Lukasz Majewski
• [U-Boot] [PATCH] samsung: dfu: Provide correct Vendor and Product IDs for UMS gadget   Lukasz Majewski
• [U-Boot] [PATCH v2 0/3] test: Extending USB gadget tests infrastructure   Lukasz Majewski
• [U-Boot] [PATCH v2 1/3] test: dfu: Extend dfu_gadget_test_init.sh to accept sizes of test files   Lukasz Majewski
• [U-Boot] [PATCH v2 2/3] test: dfu: cosmetic: Add missing license information to DFU test scripts   Lukasz Majewski
• [U-Boot] [PATCH v2 3/3] test: ums: Add script for testing UMS gadget operation   Lukasz Majewski
• [U-Boot] [PATCH] samsung: dfu: Provide correct Vendor and Product IDs for UMS gadget   Lukasz Majewski
• [U-Boot] [PATCH v3 0/3] test: Extending USB gadget tests infrastructure   Lukasz Majewski
• [U-Boot] [PATCH v3 1/3] test: dfu: Extend dfu_gadget_test_init.sh to accept sizes of test files   Lukasz Majewski
• [U-Boot] [PATCH v3 2/3] test: dfu: cosmetic: Add missing license information to DFU test scripts   Lukasz Majewski
• [U-Boot] [PATCH v3 3/3] test: ums: Add script for testing UMS gadget operation   Lukasz Majewski
• [U-Boot] [PATCH] samsung: dfu: Provide correct Vendor and Product IDs for UMS gadget   Lukasz Majewski
• [U-Boot] [UBOOT RFC PATCH 07/13] usb: gadget: g_dnl: Explicitly set the max packet size in descriptor   Lukasz Majewski
• [U-Boot] DFU to MMC #1   Lukasz Majewski
• [U-Boot] [UBOOT RFC PATCH 07/13] usb: gadget: g_dnl: Explicitly set the max packet size in descriptor   Lukasz Majewski
• [U-Boot] [UBOOT RFC PATCH 11/13] commom: usb: implement "__weak" functions to make compiler happy   Lukasz Majewski
• [U-Boot] [UBOOT RFC PATCH 02/13] usb: gadget: udc-core: Add minimal udc-core from linux kernel   Lukasz Majewski
• [U-Boot] [UBOOT RFC PATCH 09/13] common: cmd_dfu: add an API that takes controller index for handling interrupts   Lukasz Majewski
• [U-Boot] [UBOOT RFC PATCH 00/13] DRA7xx: Add DWC3 USB driver and enable DFU   Lukasz Majewski
• [U-Boot] [PATCH v3 3/3] test: ums: Add script for testing UMS gadget operation   Lukasz Majewski
• [U-Boot] [GIT][DFU] Pull request: u-boot-dfu   Lukasz Majewski
• [U-Boot] Automatic firmware upgrade using USB DFU   Lukasz Majewski
• [U-Boot] DFU to MMC #1   Lukasz Majewski
• [U-Boot] [UBOOT RFC PATCH 02/13] usb: gadget: udc-core: Add minimal udc-core from linux kernel   Lukasz Majewski
• [U-Boot] [UBOOT RFC PATCH 02/13] usb: gadget: udc-core: Add minimal udc-core from linux kernel   Lukasz Majewski
• [U-Boot] [UBOOT RFC PATCH 07/13] usb: gadget: g_dnl: Explicitly set the max packet size in descriptor   Lukasz Majewski
• [U-Boot] [UBOOT RFC PATCH 07/13] usb: gadget: g_dnl: Explicitly set the max packet size in descriptor   Lukasz Majewski
• [U-Boot] [UBOOT RFC PATCH 09/13] common: cmd_dfu: add an API that takes controller index for handling interrupts   Lukasz Majewski
• [U-Boot] [UBOOT RFC PATCH 07/13] usb: gadget: g_dnl: Explicitly set the max packet size in descriptor   Lukasz Majewski
• [U-Boot] [PATCH] samsung: s5p_goni: fix: Add missing definitions for G_DNL_UMS gadget   Lukasz Majewski
• [U-Boot] [PATCH v2 07/15] exynos: kconfig: move board select menu and common settings   Lukasz Majewski
• [U-Boot] [PATCH v2 07/15] exynos: kconfig: move board select menu and common settings   Lukasz Majewski
• [U-Boot] dfu: some wrong usb_qualifier_descriptor settings?   Lukasz Majewski
• [U-Boot] [PATCH 1/2] dfu: Provide means to find difference between dfu-util -e and -R   Lukasz Majewski
• [U-Boot] [PATCH 2/2] udc: dfu: s3c_udc: Provide function to check if USB reset was asserted   Lukasz Majewski
• [U-Boot] [PATCH 2/2] udc: dfu: s3c_udc: Provide function to check if USB reset was asserted   Lukasz Majewski
• [U-Boot] [PATCH 1/2] dfu: Provide means to find difference between dfu-util -e and -R   Lukasz Majewski
• [U-Boot] [PATCH v5 0/4] Implement "fastboot flash" for eMMC   Lukasz Majewski
• [U-Boot] [PATCH] samsung: s5p_goni: fix: Add missing definitions for G_DNL_UMS gadget   Lukasz Majewski
• [U-Boot] [PATCH v2 1/2] dfu: Provide means to find difference between dfu-util -e and -R   Lukasz Majewski
• [U-Boot] [PATCH v2 2/2] udc: dfu: s3c_udc: Provide function to check if USB reset was asserted   Lukasz Majewski
• [U-Boot] [PATCH v5 0/4] Implement "fastboot flash" for eMMC   Lukasz Majewski
• [U-Boot] [PATCH] samsung: dfu: Provide correct Vendor and Product IDs for UMS gadget   Lukasz Majewski
• [U-Boot] [PATCH v5 0/4] Implement "fastboot flash" for eMMC   Lukasz Majewski
• [U-Boot] [PATCH v5 1/4] usb/gadget: fastboot: add eMMC support for flash command   Lukasz Majewski
• [U-Boot] [PATCH v5 2/4] usb/gadget: fastboot: add support for flash command   Lukasz Majewski
• [U-Boot] [PATCH v5 3/4] usb/gadget: fastboot: minor cleanup   Lukasz Majewski
• [U-Boot] [PATCH v5 4/4] usb/gadget: fastboot: implement sparse format   Lukasz Majewski
• [U-Boot] [PATCH v5 0/4] Implement "fastboot flash" for eMMC   Lukasz Majewski
• [U-Boot] Questions on lthor usage   Lukasz Majewski
• [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Lukasz Majewski
• [U-Boot] [PATCH 0/3] *** Add support for new arch stv0991 ***   Vikas Manocha
• [U-Boot] [PATCH 1/3] stv0991 : Add basic stv0991 architecture support.   Vikas Manocha
• [U-Boot] [PATCH 2/3] stv0991 : enable ethernet support.   Vikas Manocha
• [U-Boot] [PATCH 3/3] stv0991: default + misc command configs enabled.   Vikas Manocha
• [U-Boot] [PATCH v2 0/3] add support for new arch stv0991   Vikas Manocha
• [U-Boot] [PATCH v2 1/3] stv0991 : Add basic stv0991 architecture support.   Vikas Manocha
• [U-Boot] [PATCH v2 2/3] stv0991 : enable ethernet support.   Vikas Manocha
• [U-Boot] [PATCH v2 3/3] stv0991: default + misc command configs enabled.   Vikas Manocha
• [U-Boot] [U-boot] Origen board boot failed with 2014.07 source code   Przemyslaw Marczak
• [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Przemyslaw Marczak
• [U-Boot] [PATCH 3/4] arm: debug: import debug files from Linux 3.16   Przemyslaw Marczak
• [U-Boot] [PATCH 3/4] arm: debug: import debug files from Linux 3.16   Przemyslaw Marczak
• [U-Boot] [PATCH v2 0/6] Introduce low-level debug for ARM architecture   Przemyslaw Marczak
• [U-Boot] [PATCH v2] ARM: tegra: Add support for norrin board   Allen Martin
• [U-Boot] [PATCH v2] ARM: tegra: Add support for norrin board   Allen Martin
• [U-Boot] [PATCH v3] ARM: tegra: Add support for norrin board   Allen Martin
• [U-Boot] [PATCH] 85xx/b4:Correct USB DR controller liodn entry   Ramneek Mehresh
• [U-Boot] [PATCH] powerpc/8xxx: Fix in USB device-tree fixup   Ramneek Mehresh
• [U-Boot] [PATCH] tools: genboardscfg.py, use default terminal size if undetectable   Roger Meier
• [U-Boot] [PATCH] Makefile: remove generated boards.cfg within make mrproper   Roger Meier
• [U-Boot] [PATCH] tools: genboardscfg.py, use default terminal size if undetectable   Roger Meier
• [U-Boot] [PATCH v3] tools: genboardscfg.py, no exception if columns undetectable   Roger Meier
• [U-Boot] [PATCH] Makefile: remove generated boards.cfg within make mrproper   Roger Meier
• [U-Boot] [PATCH v2] Makefile: remove generated boards.cfg within make distclean   Roger Meier
• [U-Boot] [PATCH v3] tools: genboardscfg.py, no exception if columns undetectable   Roger Meier
• [U-Boot] [PATCH v3] Makefile: remove generated boards.cfg within make distclean   Roger Meier
• [U-Boot] [PATCH v4] Makefile: remove generated boards.cfg within make distclean   Roger Meier
• [U-Boot] [RFC/PATCH] sunxi: Populate the default environment for sunxi-based systems   Karsten Merker
• [U-Boot] [RFC/PATCH 1/1] sunxi: Populate the default environment for sunxi-based systems   Karsten Merker
• [U-Boot] [RFC/PATCH] sunxi: Populate the default environment for sunxi-based systems   Karsten Merker
• [U-Boot] Excuse my interuption of your work, but a question on video support   Robert Moskowitz
• [PATCH] Added support for comments in input to mkenvimage.   Dominik Muth
• [U-Boot] [PATCH] Added support for comments in input to mkenvimage.   Dominik Muth
• [U-Boot] Passing bootargs to arm64 kernel   Youngmin Nam
• [U-Boot] Passing bootargs to arm64 kernel   Youngmin Nam
• [U-Boot] [PATCH] sun7i: Add support for Olimex A20-OLinuXino-LIME   FUKAUMI Naoki
• [U-Boot] Newbies list?   David Nelson
• [U-Boot] How to recognize need for new configuration   David Nelson
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Robert Nelson
• [U-Boot] Fix for Kconfig buildsystem   Markus Niebel
• [U-Boot] [linux-sunxi] [PATCH 0/2] sunxi: Single u-boot binary for Allwinner A10/A13/A20 devices   Henrik Nordström
• [U-Boot] [linux-sunxi] Re: [PATCH] video: add cfb console driver for sunxi   Henrik Nordström
• [U-Boot] [linux-sunxi] Re: [PATCH] video: add cfb console driver for sunxi   Henrik Nordström
• [U-Boot] [linux-sunxi] Re: [PATCH] video: add cfb console driver for sunxi   Henrik Nordström
• [U-Boot] use CONFIG_PRE_CONSOLE_BUFFER   Johann Obermayr
• [U-Boot] [PATCH v1] arm: include config.h in vectors.S   Chris Packham
• [U-Boot] [PATCH] common: fix compiler warning on wrong printf format   Chris Packham
• [U-Boot] thor integration with ci_udc   S Durga Prasad Paladugu
• [U-Boot] thor integration with ci_udc   S Durga Prasad Paladugu
• [U-Boot] Questions on lthor usage   S Durga Prasad Paladugu
• [U-Boot] [PATCH 1/3] driver/mc: Add Layerscape Management Complex hardware interface   Lijun Pan
• [U-Boot] [PATCH 2/3] driver/mc: Add Layerscape Management Complex wrapper function   Lijun Pan
• [U-Boot] [PATCH 3/3] driver/mc: print Management Complex version info   Lijun Pan
• [U-Boot] [PATCH 06/15] kirkwood: kconfig: refactor Kconfig and defconfig   Luka Perkov
• [U-Boot] [PATCH 06/15] kirkwood: kconfig: refactor Kconfig and defconfig   Luka Perkov
• [U-Boot] [PATCH] mkimage: fix compilation issues on OpenBSD   Luka Perkov
• [U-Boot] [PATCH] tools/env: change stripping strategy to allow no-stripping   Thomas Petazzoni
• [U-Boot] mmc: question about capacity detection   Hannes Petermaier
• [U-Boot] mmc: question about capacity detection   Hannes Petermaier
• [U-Boot] hw_watchdog   Hannes Petermaier
• [U-Boot] [PATCH] mmc: fix ERASE_GRP_DEF handling   Hannes Petermaier
• [U-Boot] booting from sd card problem   Hannes Petermaier
• [U-Boot] [PATCH] mmc: fix ERASE_GRP_DEF handling   Hannes Petermaier
• [U-Boot] Newbies list?   Hannes Petermaier
• [U-Boot] omap3 nand boot issue   Maxim Podbereznyy
• [U-Boot] Falcon boot mode   Andy Pont
• [U-Boot] MMC interfaces on AM335x   Andy Pont
• [U-Boot] [PATCH 3/4] mtd: nand: add Freescale NFC driver   Bill Pringlemeir
• [U-Boot] [PATCH 3/4] mtd: nand: add Freescale NFC driver   Bill Pringlemeir
• [U-Boot] [PATCH 3/4] mtd: nand: add Freescale NFC driver   Bill Pringlemeir
• [U-Boot] [PATCH 3/4] mtd: nand: add Freescale NFC driver   Bill Pringlemeir
• [U-Boot] [PATCH 3/4] mtd: nand: add Freescale NFC driver   Bill Pringlemeir
• [U-Boot] [PATCH 3/4] mtd: nand: add Freescale NFC driver   Bill Pringlemeir
• [U-Boot] [PATCH v2 3/4] mtd: nand: add Freescale NFC driver   Bill Pringlemeir
• [U-Boot] [PATCH v2 3/4] mtd: nand: add Freescale NFC driver   Bill Pringlemeir
• [U-Boot] [PATCH v2 3/4] mtd: nand: add Freescale NFC driver   Bill Pringlemeir
• [U-Boot] [PATCH v3 3/4] mtd: nand: add Freescale vf610_nfc driver   Bill Pringlemeir
• [U-Boot] [PATCH] ARM: enable ARMv7 virt support for the Arndale board   Andre Przywara
• [U-Boot] [PATCH] ARM: enable ARMv7 virt support for the Arndale board   Andre Przywara
• [U-Boot] U-boot build: How to add a static library to the u-boot build   Vishal Pundareeka
• [U-Boot] [PATCH v2 1/3] arm: bcm281xx: Add Ethernet Clock support   Steve Rae
• [U-Boot] [PATCH v2 2/3] arm: bcm281xx: net: Add Ethernet Driver   Steve Rae
• [U-Boot] [PATCH v2 3/3] arm: bcm281xx: add board with Ethernet capability   Steve Rae
• [U-Boot] [PATCH v3 1/4] usb/gadget: fastboot: add sparse image definitions   Steve Rae
• [U-Boot] [PATCH v3 4/4] usb/gadget: fastboot: minor cleanup   Steve Rae
• [U-Boot] [PATCH v3 3/4] usb/gadget: fastboot: add support for flash command   Steve Rae
• [U-Boot] [PATCH v3 2/4] usb/gadget: fastboot: add eMMC support for flash command   Steve Rae
• [U-Boot] [PATCH v4 0/5] Implement "fastboot flash" for eMMC   Steve Rae
• [U-Boot] [PATCH v4 1/5] usb/gadget: fastboot: add eMMC support for flash command   Steve Rae
• [U-Boot] [PATCH v4 2/5] usb/gadget: fastboot: add support for flash command   Steve Rae
• [U-Boot] [PATCH v4 3/5] usb/gadget: fastboot: minor cleanup   Steve Rae
• [U-Boot] [PATCH v4 4/5] usb/gadget: fastboot: add sparse image definitions   Steve Rae
• [U-Boot] [PATCH v4 5/5] usb/gadget: fastboot: implement sparse format   Steve Rae
• [U-Boot] [PATCH v3 2/4] usb/gadget: fastboot: add eMMC support for flash command   Steve Rae
• [U-Boot] [PATCH v4 0/5] Implement "fastboot flash" for eMMC   Steve Rae
• [U-Boot] [PATCH v4 4/5] usb/gadget: fastboot: add sparse image definitions   Steve Rae
• [U-Boot] [PATCH v4 4/5] usb/gadget: fastboot: add sparse image definitions   Steve Rae
• [U-Boot] [PATCH v3 2/4] usb/gadget: fastboot: add eMMC support for flash command   Steve Rae
• [U-Boot] [PATCH v4 4/5] usb/gadget: fastboot: add sparse image definitions   Steve Rae
• [U-Boot] [PATCH 2/2 v2] fastboot: Flash command support   Steve Rae
• [U-Boot] [PATCH v3 0/5] Introducing the Broadcom Cygnus and NSP boards.   Steve Rae
• [U-Boot] [PATCH v3 1/5] arm: iproc: Initial commit of iproc architecture code   Steve Rae
• [U-Boot] [PATCH v3 2/5] arm: bcmcygnus: Add bcmcygnus u-architecture   Steve Rae
• [U-Boot] [PATCH v3 3/5] arm: bcmnsp: Add bcmnsp u-architecture   Steve Rae
• [U-Boot] [PATCH v3 4/5] arm: add Cygnus and NSP boards   Steve Rae
• [U-Boot] [PATCH v3 5/5] arm: convert Cygnus and NSP boards to Kconfig   Steve Rae
• [U-Boot] [PATCH v1 0/4] Implement "sparse format" for fastboot   Steve Rae
• [U-Boot] [PATCH v1 1/4] add code to handle Android sparse image format   Steve Rae
• [U-Boot] [PATCH v1 2/4] update code which handles Android sparse image format   Steve Rae
• [U-Boot] [PATCH v1 3/4] cleanup code which handles the Android sparse image format   Steve Rae
• [U-Boot] [PATCH v1 4/4] implement the Android sparse image format   Steve Rae
• [U-Boot] [PATCH v5 0/4] Implement "fastboot flash" for eMMC   Steve Rae
• [U-Boot] [PATCH v5 1/4] usb/gadget: fastboot: add eMMC support for flash command   Steve Rae
• [U-Boot] [PATCH v5 2/4] usb/gadget: fastboot: add support for flash command   Steve Rae
• [U-Boot] [PATCH v5 3/4] usb/gadget: fastboot: minor cleanup   Steve Rae
• [U-Boot] [PATCH v5 4/4] usb/gadget: fastboot: implement sparse format   Steve Rae
• [U-Boot] [PATCH] patman: implement 'reverse' in LogCmd()   Steve Rae
• [U-Boot] [PATCH v5 0/4] Implement "fastboot flash" for eMMC   Steve Rae
• [U-Boot] [PATCH 1/4] vexpress64: kconfig: consolidate CONFIG_TARGET_VEXPRESS_AEMV8A_SEMI   Steve Rae
• [U-Boot] [PATCH v5 0/4] Implement "fastboot flash" for eMMC   Steve Rae
• [U-Boot] [PATCH v6 0/4] Implement "fastboot flash" for eMMC   Steve Rae
• [U-Boot] [PATCH v6 1/4] usb/gadget: fastboot: add eMMC support for flash command   Steve Rae
• [U-Boot] [PATCH v6 2/4] usb/gadget: fastboot: add support for flash command   Steve Rae
• [U-Boot] [PATCH v6 3/4] usb/gadget: fastboot: minor cleanup   Steve Rae
• [U-Boot] [PATCH v6 4/4] usb/gadget: fastboot: implement sparse format   Steve Rae
• [U-Boot] [PATCH v5 1/4] usb/gadget: fastboot: add eMMC support for flash command   Steve Rae
• [U-Boot] [PATCH v6 4/4] usb/gadget: fastboot: implement sparse format   Steve Rae
• [U-Boot] buildman: suspect issue with patman tags   Steve Rae
• [U-Boot] buildman: selection question   Steve Rae
• [U-Boot] [PATCH v5 0/4] Implement "fastboot flash" for eMMC   Steve Rae
• [U-Boot] buildman: selection question   Steve Rae
• [U-Boot] buildman: suspect issue with patman tags   Steve Rae
• [U-Boot] [U-Boot, v1, 3/4] cleanup code which handles the Android sparse image format   Steve Rae
• [U-Boot] [PATCH v2 0/4] Implement "sparse format" for fastboot   Steve Rae
• [U-Boot] [PATCH v2 1/4] add code to handle Android sparse image format   Steve Rae
• [U-Boot] [PATCH v2 2/4] update code which handles Android sparse image format   Steve Rae
• [U-Boot] [PATCH v2 3/4] cleanup code which handles the Android sparse image format   Steve Rae
• [U-Boot] [PATCH v2 4/4] implement the Android sparse image format   Steve Rae
• [U-Boot] [PATCH v3 0/5] Introducing the Broadcom Cygnus and NSP boards.   Steve Rae
• [U-Boot] [PATCH v2 1/3] arm: bcm281xx: Add Ethernet Clock support   Steve Rae
• [U-Boot] [PATCH v2 3/4] cleanup code which handles the Android sparse image format   Steve Rae
• [U-Boot] [PATCH v2 1/4] add code to handle Android sparse image format   Steve Rae
• [U-Boot] [PATCH v2 1/4] add code to handle Android sparse image format   Steve Rae
• [U-Boot] buildman: suspect issue with patman tags   Steve Rae
• [U-Boot] [PATCH v2 1/4] add code to handle Android sparse image format   Steve Rae
• [U-Boot] [PATCH v2 1/4] add code to handle Android sparse image format   Steve Rae
• [U-Boot] [PATCH v3] powerpc/t104xrdb: Add T1042RDB board support   Vijay Rai
• [U-Boot] [PATCH v4] powerpc/t104xrdb: Add T1042RDB board support   Vijay Rai
• [U-Boot] SPL broken on i.mx31 platforms   Helmut Raiger
• [U-Boot] [PATCH] net: BOOTP retry timeout improvements   Thierry Reding
• [U-Boot] [PATCH] net: BOOTP retry timeout improvements   Thierry Reding
• [U-Boot] [PATCH] net: BOOTP retry timeout improvements   Thierry Reding
• [U-Boot] [PATCH] net: BOOTP retry timeout improvements   Thierry Reding
• [U-Boot] [PATCH] net: More BOOTP retry timeout improvements   Thierry Reding
• [U-Boot] [PATCH] buildman: Create parent directories as necessary   Thierry Reding
• [U-Boot] [PATCH 00/23] ARM: tegra: Add PCIe support   Thierry Reding
• [U-Boot] [PATCH 01/23] fdt: Add functions to query a node's #address- and #size-cells   Thierry Reding
• [U-Boot] [PATCH 02/23] fdt: Add a function to get the index of a string   Thierry Reding
• [U-Boot] [PATCH 03/23] fdt: Add resource parsing functions   Thierry Reding
• [U-Boot] [PATCH 04/23] fdt: Add a function to return PCI BDF triplet   Thierry Reding
• [U-Boot] [PATCH 05/23] fdt: Add a subnodes iterator macro   Thierry Reding
• [U-Boot] [PATCH 06/23] pci: Abort early if bus does not exist   Thierry Reding
• [U-Boot] [PATCH 07/23] pci: Honour pci_skip_dev()   Thierry Reding
• [U-Boot] [PATCH 08/23] Add pr_fmt() macro   Thierry Reding
• [U-Boot] [PATCH 09/23] ARM: tegra: Implement tegra_plle_enable()   Thierry Reding
• [U-Boot] [PATCH 10/23] ARM: tegra: Provide PCIEXCLK reset ID   Thierry Reding
• [U-Boot] [PATCH 11/23] ARM: tegra: Implement powergate support   Thierry Reding
• [U-Boot] [PATCH 12/23] ARM: tegra: Implement XUSB pad controller   Thierry Reding
• [U-Boot] [PATCH 13/23] ARM: tegra: Add XUSB pad controller on Tegra124   Thierry Reding
• [U-Boot] [PATCH 14/23] ARM: tegra: Enable XUSB pad controller on Jetson TK1   Thierry Reding
• [U-Boot] [PATCH 15/23] pci: tegra: Add Tegra PCIe driver   Thierry Reding
• [U-Boot] [PATCH 16/23] ARM: tegra: Add Tegra20 PCIe device tree node   Thierry Reding
• [U-Boot] [PATCH 17/23] ARM: tegra: Enable PCIe on TrimSlice   Thierry Reding
• [U-Boot] [PATCH 18/23] ARM: tegra: Add Tegra30 PCIe device tree node   Thierry Reding
• [U-Boot] [PATCH 19/23] ARM: tegra: Enable PCIe on Beaver   Thierry Reding
• [U-Boot] [PATCH 20/23] ARM: tegra: Enable PCIe on Cardhu   Thierry Reding
• [U-Boot] [PATCH 21/23] ARM: tegra: Add GIC for Tegra124   Thierry Reding
• [U-Boot] [PATCH 22/23] ARM: tegra: Add Tegra124 PCIe device tree node   Thierry Reding
• [U-Boot] [PATCH 23/23] ARM: tegra: Enable PCIe on Jetson TK1   Thierry Reding
• [U-Boot] [PATCH 0/9] net: rtl8169: Fix cache maintenance issues   Thierry Reding
• [U-Boot] [PATCH 1/9] ARM: cache_v7: Various minor cleanups   Thierry Reding
• [U-Boot] [PATCH 2/9] ARM: cache-cp15: Use unsigned long for address and size   Thierry Reding
• [U-Boot] [PATCH 3/9] malloc: Output region when debugging   Thierry Reding
• [U-Boot] [PATCH 4/9] ARM: Implement non-cached memory support   Thierry Reding
• [U-Boot] [PATCH 5/9] ARM: tegra: Enable non-cached memory   Thierry Reding
• [U-Boot] [PATCH 6/9] net: rtl8169: Honor CONFIG_SYS_RX_ETH_BUFFER   Thierry Reding
• [U-Boot] [PATCH 7/9] net: rtl8169: Properly align buffers   Thierry Reding
• [U-Boot] [PATCH 8/9] net: rtl8169: Use non-cached memory if available   Thierry Reding
• [U-Boot] [PATCH 9/9] net: rtl8169: Add support for RTL-8168/8111g   Thierry Reding
• [U-Boot] [PATCH] net: More BOOTP retry timeout improvements   Thierry Reding
• [U-Boot] [PATCH v2] net: More BOOTP retry timeout improvements   Thierry Reding
• [U-Boot] [PATCH v2] buildman: Create parent directories as necessary   Thierry Reding
• [U-Boot] [PATCH 01/23] fdt: Add functions to query a node's #address- and #size-cells   Thierry Reding
• [U-Boot] [PATCH 02/23] fdt: Add a function to get the index of a string   Thierry Reding
• [U-Boot] [PATCH 03/23] fdt: Add resource parsing functions   Thierry Reding
• [U-Boot] [PATCH 05/23] fdt: Add a subnodes iterator macro   Thierry Reding
• [U-Boot] [PATCH 08/23] Add pr_fmt() macro   Thierry Reding
• [U-Boot] [PATCH 23/23] ARM: tegra: Enable PCIe on Jetson TK1   Thierry Reding
• [U-Boot] [PATCH 01/23] fdt: Add functions to query a node's #address- and #size-cells   Thierry Reding
• [U-Boot] [PATCH 03/23] fdt: Add resource parsing functions   Thierry Reding
• [U-Boot] [PATCH 05/23] fdt: Add a subnodes iterator macro   Thierry Reding
• [U-Boot] [PATCH] net: More BOOTP retry timeout improvements   Thierry Reding
• [U-Boot] [PATCH 03/23] fdt: Add resource parsing functions   Thierry Reding
• [U-Boot] [PATCH 19/23] ARM: tegra: Enable PCIe on Beaver   Thierry Reding
• [U-Boot] [PATCH 19/23] ARM: tegra: Enable PCIe on Beaver   Thierry Reding
• [U-Boot] [PATCH 0/9] net: rtl8169: Fix cache maintenance issues   Thierry Reding
• [U-Boot] [PATCH 4/9] ARM: Implement non-cached memory support   Thierry Reding
• [U-Boot] Possible bug in U-Boot Exynos clock driver   Thierry Reding
• [U-Boot] [PATCH] imx: ventana: Avoid undefined behaviour   Thierry Reding
• [U-Boot] [PATCH 2/9] ARM: cache-cp15: Use unsigned long for address and size   Thierry Reding
• [U-Boot] [PATCH 4/9] ARM: Implement non-cached memory support   Thierry Reding
• [U-Boot] [PATCH 7/9] net: rtl8169: Properly align buffers   Thierry Reding
• [U-Boot] [PATCH 8/9] net: rtl8169: Use non-cached memory if available   Thierry Reding
• [U-Boot] [PATCH 23/23] ARM: tegra: Enable PCIe on Jetson TK1   Thierry Reding
• [U-Boot] [PATCH 19/23] ARM: tegra: Enable PCIe on Beaver   Thierry Reding
• [U-Boot] [PATCH 10/23] ARM: tegra: Provide PCIEXCLK reset ID   Thierry Reding
• [U-Boot] [PATCH 11/23] ARM: tegra: Implement powergate support   Thierry Reding
• [U-Boot] [PATCH 12/23] ARM: tegra: Implement XUSB pad controller   Thierry Reding
• [U-Boot] [PATCH 12/23] ARM: tegra: Implement XUSB pad controller   Thierry Reding
• [U-Boot] [PATCH 17/23] ARM: tegra: Enable PCIe on TrimSlice   Thierry Reding
• [U-Boot] [PATCH 18/23] ARM: tegra: Add Tegra30 PCIe device tree node   Thierry Reding
• [U-Boot] [PATCH 15/23] pci: tegra: Add Tegra PCIe driver   Thierry Reding
• [U-Boot] [PATCH 23/23] ARM: tegra: Enable PCIe on Jetson TK1   Thierry Reding
• [U-Boot] [PATCH 15/23] pci: tegra: Add Tegra PCIe driver   Thierry Reding
• [U-Boot] [PATCH 23/23] ARM: tegra: Enable PCIe on Jetson TK1   Thierry Reding
• [U-Boot] [PATCH 01/23] fdt: Add functions to query a node's #address- and #size-cells   Thierry Reding
• [U-Boot] [PATCH 23/23] ARM: tegra: Enable PCIe on Jetson TK1   Thierry Reding
• [U-Boot] [PATCH v2] arm: tegra: initial support for apalis t30   Thierry Reding
• [U-Boot] [PATCH v2 00/40] ARM: tegra: Add PCIe support   Thierry Reding
• [U-Boot] [PATCH v2 01/40] vsprintf: Add modifier for phys_addr_t   Thierry Reding
• [U-Boot] [PATCH v2 02/40] fdt: Add a function to count strings   Thierry Reding
• [U-Boot] [PATCH v2 03/40] fdt: Add a function to get the index of a string   Thierry Reding
• [U-Boot] [PATCH v2 04/40] fdt: Add functions to retrieve strings   Thierry Reding
• [U-Boot] [PATCH v2 05/40] fdt: Add resource parsing functions   Thierry Reding
• [U-Boot] [PATCH v2 06/40] fdt: Add a function to return PCI BDF triplet   Thierry Reding
• [U-Boot] [PATCH v2 07/40] fdt: Add a subnodes iterator macro   Thierry Reding
• [U-Boot] [PATCH v2 08/40] pci: Abort early if bus does not exist   Thierry Reding
• [U-Boot] [PATCH v2 09/40] pci: Honour pci_skip_dev()   Thierry Reding
• [U-Boot] [PATCH v2 10/40] Add pr_fmt() macro   Thierry Reding
• [U-Boot] [PATCH v2 11/40] i2c: Initialize the correct bus   Thierry Reding
• [U-Boot] [PATCH v2 12/40] i2c: Refactor adapter initialization   Thierry Reding
• [U-Boot] [PATCH v2 13/40] i2c: Add high-level API   Thierry Reding
• [U-Boot] [PATCH v2 14/40] i2c: tegra: Implement i2c_get_bus_num_fdt()   Thierry Reding
• [U-Boot] [PATCH v2 15/40] power: Add AMS AS3722 PMIC support   Thierry Reding
• [U-Boot] [PATCH v2 16/40] ARM: tegra: Implement tegra_plle_enable()   Thierry Reding
• [U-Boot] [PATCH v2 17/40] ARM: tegra: Provide PCIEXCLK reset ID   Thierry Reding
• [U-Boot] [PATCH v2 18/40] ARM: tegra: Implement powergate support   Thierry Reding
• [U-Boot] [PATCH v2 19/40] ARM: tegra: Implement XUSB pad controller   Thierry Reding
• [U-Boot] [PATCH v2 20/40] ARM: tegra: Add XUSB pad controller on Tegra124   Thierry Reding
• [U-Boot] [PATCH v2 21/40] ARM: tegra: Enable XUSB pad controller on Jetson TK1   Thierry Reding
• [U-Boot] [PATCH v2 22/40] pci: tegra: Add Tegra PCIe driver   Thierry Reding
• [U-Boot] [PATCH v2 23/40] ARM: tegra: Add Tegra20 PCIe device tree node   Thierry Reding
• [U-Boot] [PATCH v2 24/40] ARM: tegra: Enable PCIe on TrimSlice   Thierry Reding
• [U-Boot] [PATCH v2 25/40] ARM: tegra: Add GIC for Tegra30   Thierry Reding
• [U-Boot] [PATCH v2 26/40] ARM: tegra: Add Tegra30 PCIe device tree node   Thierry Reding
• [U-Boot] [PATCH v2 27/40] ARM: tegra: Enable PCIe on Cardhu   Thierry Reding
• [U-Boot] [PATCH v2 28/40] ARM: tegra: Enable PCIe on Beaver   Thierry Reding
• [U-Boot] [PATCH v2 29/40] ARM: tegra: Add GIC for Tegra124   Thierry Reding
• [U-Boot] [PATCH v2 30/40] ARM: tegra: Add Tegra124 PCIe device tree node   Thierry Reding
• [U-Boot] [PATCH v2 31/40] ARM: tegra: Enable PCIe on Jetson TK1   Thierry Reding
• [U-Boot] [PATCH v2 32/40] ARM: cache_v7: Various minor cleanups   Thierry Reding
• [U-Boot] [PATCH v2 33/40] ARM: cache-cp15: Use more accurate types   Thierry Reding
• [U-Boot] [PATCH v2 34/40] malloc: Output region when debugging   Thierry Reding
• [U-Boot] [PATCH v2 35/40] ARM: Implement non-cached memory support   Thierry Reding
• [U-Boot] [PATCH v2 36/40] ARM: tegra: Enable non-cached memory   Thierry Reding
• [U-Boot] [PATCH v2 37/40] net: rtl8169: Honor CONFIG_SYS_RX_ETH_BUFFER   Thierry Reding
• [U-Boot] [PATCH v2 38/40] net: rtl8169: Properly align buffers   Thierry Reding
• [U-Boot] [PATCH v2 39/40] net: rtl8169: Use non-cached memory if available   Thierry Reding
• [U-Boot] [PATCH v2 40/40] net: rtl8169: Add support for RTL-8168/8111g   Thierry Reding
• [U-Boot] [PATCH v2 11/40] i2c: Initialize the correct bus   Thierry Reding
• [U-Boot] [PATCH v2 13/40] i2c: Add high-level API   Thierry Reding
• [U-Boot] [PATCH v2 15/40] power: Add AMS AS3722 PMIC support   Thierry Reding
• [U-Boot] [PATCH v2 01/40] vsprintf: Add modifier for phys_addr_t   Thierry Reding
• [U-Boot] [PATCH v2 01/40] vsprintf: Add modifier for phys_addr_t   Thierry Reding
• [U-Boot] [PATCH v2 13/40] i2c: Add high-level API   Thierry Reding
• [U-Boot] [PATCH v2 13/40] i2c: Add high-level API   Thierry Reding
• [U-Boot] [PATCH 23/23] ARM: tegra: Enable PCIe on Jetson TK1   Thierry Reding
• [U-Boot] [PATCH 23/23] ARM: tegra: Enable PCIe on Jetson TK1   Thierry Reding
• [U-Boot] [PATCH v2 01/40] vsprintf: Add modifier for phys_addr_t   Thierry Reding
• [U-Boot] Help wzr-hp-g300nh bricked - jtag recovery help   Pasquale Riccio
• [U-Boot] U-Boot for MIPS AR7161   Pasquale Riccio
• [U-Boot] [PATCH v1] arm: include config.h in vectors.S   Christian Riesch
• [U-Boot] [PATCH] arm: fix missing exception handling   Christian Riesch
• [U-Boot] [PATCH] arm: fix missing exception handling   Christian Riesch
• [U-Boot] [PATCH] am335x_evm: Convert CONFIG_CONS_INDEX into a menu choice   Tom Rini
• [U-Boot] Removing the need for boards.cfg   Tom Rini
• [U-Boot] [PATCH] am335x_evm: Convert CONFIG_CONS_INDEX into a menu choice   Tom Rini
• [U-Boot] [PATCH v2] am335x_evm: Convert CONFIG_CONS_INDEX into a menu choice   Tom Rini
• [U-Boot] [PATCH v2 1/4] usb/gadget: fastboot: add sparse image definitions   Tom Rini
• [U-Boot] [PATCH v3 07/16] sandbox: dts: Add a serial console node   Tom Rini
• [U-Boot] [PATCH] env_fat.c: Make sure our buffer is cache aligned   Tom Rini
• [U-Boot] [PATCH 7/7] sunxi: Add environment settings to make extlinux.conf booting work   Tom Rini
• [U-Boot] [PATCH 7/7] sunxi: Add environment settings to make extlinux.conf booting work   Tom Rini
• [U-Boot] [PATCH v2 0/3] Add some missing buildman features and deprecate MAKEALL   Tom Rini
• [U-Boot] [RFC PATCH v2 0/2] Make Python scripts compatible with older versions   Tom Rini
• [U-Boot] [PATCH 03/18] sf: fix sf probe   Tom Rini
• [U-Boot] Quick guide to Kconfig   Tom Rini
• [U-Boot] [PATCH 03/18] sf: fix sf probe   Tom Rini
• [U-Boot] Quick guide to Kconfig   Tom Rini
• [U-Boot] Quick guide to Kconfig   Tom Rini
• [U-Boot] [PATCH v5 05/11] exynos: dts: Adjust device tree files for U-Boot   Tom Rini
• [U-Boot] [PATCH] ARM: tegra: add Colibri T30 board support   Tom Rini
• [U-Boot] [PATCH 12/15] keystone: kconfig: move board select menu and common settings   Tom Rini
• [U-Boot] [PATCH 11/15] omap5: kconfig: move board select menu and common settings   Tom Rini
• [U-Boot] [PATCH 01/15] omap: remove omap5912osk board support   Tom Rini
• [U-Boot] [PATCH 09/15] omap3: kconfig: move board select menu and common settings   Tom Rini
• [U-Boot] [PATCH 08/15] davinci: kconfig: move board select menu and common settings   Tom Rini
• [U-Boot] [PATCH 10/15] omap4: kconfig: move board select menu and common settings   Tom Rini
• [U-Boot] [PATCH] drivers: rtc: remove dead drivers   Tom Rini
• [U-Boot] [PATCH v3 14/16] tegra: dts: Add serial port details   Tom Rini
• [U-Boot] [PATCH 7/7] sunxi: Add environment settings to make extlinux.conf booting work   Tom Rini
• [U-Boot] [PATCH v2 0/3] Add some missing buildman features and deprecate MAKEALL   Tom Rini
• [U-Boot] [PATCH v3 1/4] usb/gadget: fastboot: add sparse image definitions   Tom Rini
• [U-Boot] [PATCH v5 05/11] exynos: dts: Adjust device tree files for U-Boot   Tom Rini
• [U-Boot] [RFC PATCH v2 0/2] Make Python scripts compatible with older versions   Tom Rini
• [U-Boot] [PATCH v2 0/3] Add some missing buildman features and deprecate MAKEALL   Tom Rini
• [U-Boot] [PATCH v4 03/13] buildman: Allow building of current source tree   Tom Rini
• [U-Boot] [PATCH v4 03/13] buildman: Allow building of current source tree   Tom Rini
• [U-Boot] [PATCH v4 13/13] RFC: Deprecate MAKEALL   Tom Rini
• [U-Boot] Pull request: u-boot-blackfin   Tom Rini
• [U-Boot] Please pull u-boot-dm.git   Tom Rini
• [U-Boot] Please pull u-boot-mpc85xx.git master   Tom Rini
• [U-Boot] Pull request: u-boot-mmc 1/08/2014   Tom Rini
• [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] doc: delete README.ARM-SoC   Tom Rini
• [U-Boot] doc: README.SPL: adjust for Kbuild and Kconfig   Tom Rini
• [U-Boot] git-mailrc: add a kconfig alias   Tom Rini
• [U-Boot] The _config target is not present anymore, mention _defconfig instead   Tom Rini
• [U-Boot] Change Andy Fleming's email address   Tom Rini
• [U-Boot] [ANN] U-Boot v2014.07-rc1 released   Tom Rini
• [U-Boot] [PATCH v4 02/13] buildman: Add some notes about moving from MAKEALL   Tom Rini
• [U-Boot] [PATCH] net: BOOTP retry timeout improvements   Tom Rini
• [U-Boot] [RFC PATCH v2 0/2] Make Python scripts compatible with older versions   Tom Rini
• [U-Boot] [PATCH] tools: genboardscfg.py, use default terminal size if undetectable   Tom Rini
• [U-Boot] [RFC PATCH v2 0/2] Make Python scripts compatible with older versions   Tom Rini
• [U-Boot] [RFC PATCH v2 0/2] Make Python scripts compatible with older versions   Tom Rini
• [U-Boot] Python subprocess module missing in multiconfig.py   Tom Rini
• [U-Boot] Python subprocess module missing in multiconfig.py   Tom Rini
• [U-Boot] Removing the need for boards.cfg   Tom Rini
• [U-Boot] [PATCH] Makefile: remove generated boards.cfg within make mrproper   Tom Rini
• [U-Boot] Removing the need for boards.cfg   Tom Rini
• [U-Boot] [PATCH v4 2/2] support blackfin board initialization in generic board_f   Tom Rini
• [U-Boot] [patch 2/2] spl: Lightweight UBI and UBI fastmap support   Tom Rini
• [U-Boot] [PATCH v5 0/13] Add some missing buildman features and deprecate MAKEALL   Tom Rini
• [U-Boot] Pull request: u-boot-sh/master   Tom Rini
• [U-Boot] [PULL] u-boot/master   Tom Rini
• [U-Boot] [PATCH v4 13/13] RFC: Deprecate MAKEALL   Tom Rini
• [U-Boot] [PATCH v4 13/13] RFC: Deprecate MAKEALL   Tom Rini
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Tom Rini
• [U-Boot] [RFC PATCH v2 0/2] Make Python scripts compatible with older versions   Tom Rini
• [U-Boot] [U-Boot, 1/3] image: introduce genimg_get_kernel_addr()   Tom Rini
• [U-Boot] [U-Boot, 2/3] pxe: detect image format before calling bootm/bootz   Tom Rini
• [U-Boot] [U-Boot,3/3] bootm: use genimg_get_kernel_addr()   Tom Rini
• [U-Boot] [U-Boot, v3] Implement generalised RSA public exponents for verified boot   Tom Rini
• [U-Boot] ext4: trats: trats2: Modify dfu_alt_info's file names to have absolute path   Tom Rini
• [U-Boot] doc: README.android-fastboot: Add note about vendor ID   Tom Rini
• [U-Boot] pxe: clear Bootfile before returning   Tom Rini
• [U-Boot] [U-Boot, v2] Makefile: use $(shell ...) for determining file_size   Tom Rini
• [U-Boot] Makefile: use u-boot.map for binary_size_check   Tom Rini
• [U-Boot] [U-Boot,v2] board_r: Add missing return to initr_doc   Tom Rini
• [U-Boot] vitesse: remove duplicated argument to ||   Tom Rini
• [U-Boot] emif.h: remove duplicated argument to |   Tom Rini
• [U-Boot] net: BOOTP retry timeout improvements   Tom Rini
• [U-Boot] [U-Boot,1/2] git-mailrc: Change fdt maintainer   Tom Rini
• [U-Boot] [U-Boot,2/2] git-mailrc: Add myself as dm maintainer   Tom Rini
• [U-Boot] ext4load: fix help text   Tom Rini
• [U-Boot] cosmetic: update doc/README.scrapyard   Tom Rini
• [U-Boot] [U-Boot, 1/2] fdt: Rename fdt_resize() to fdt_shrink_to_minimum()   Tom Rini
• [U-Boot] [U-Boot,2/2] fdt: Sync up with libfdt   Tom Rini
• [U-Boot] omap: clean-up dead configs   Tom Rini
• [U-Boot] rsa: Fix two errors in the implementation   Tom Rini
• [U-Boot] [U-Boot,1/3] config: introduce a generic $bootcmd   Tom Rini
• [U-Boot] [U-Boot,2/3] ARM: tegra: use new generic $bootcmd   Tom Rini
• [U-Boot] [U-Boot,3/3] ARM: rpi_b: use new generic $bootcmd   Tom Rini
• [U-Boot] lib: lmb: fix overflow in __lmb_alloc_base w/ large RAM   Tom Rini
• [U-Boot] [U-Boot,v3,1/4] MAINTAINERS: add initial version   Tom Rini
• [U-Boot] [U-Boot, v3, 2/4] get_maintainer.pl: import script from linux 3.15   Tom Rini
• [U-Boot] [U-Boot, v3, 3/4] get_maintainer.pl: adapt to U-Boot tree   Tom Rini
• [U-Boot] [U-Boot, v3, 4/4] get_maintainer.pl: add support for scanning multiple MAINTAINERS files   Tom Rini
• [U-Boot] env_fat.c: Make sure our buffer is cache aligned   Tom Rini
• [U-Boot] [RFC PATCH v2 0/2] Make Python scripts compatible with older versions   Tom Rini
• [U-Boot] [RFC PATCH 0/1] SPL JTAG boot mode   Tom Rini
• [U-Boot] Removing the need for boards.cfg   Tom Rini
• [U-Boot] Removing the need for boards.cfg   Tom Rini
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Tom Rini
• [U-Boot] [PATCH v6 16/20] patman: buildman: Correct spelling of 'colour'   Tom Rini
• [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Tom Rini
• [U-Boot] [RFC PATCH v2 0/2] Make Python scripts compatible with older versions   Tom Rini
• [U-Boot] Pull request: u-boot-video/master   Tom Rini
• [U-Boot] Pull request v2: u-boot-blackfin   Tom Rini
• [U-Boot] [PATCH v6 20/20] RFC: Deprecate MAKEALL   Tom Rini
• [U-Boot] [PATCH v6 20/20] RFC: Deprecate MAKEALL   Tom Rini
• [U-Boot] Passing bootargs to arm64 kernel   Tom Rini
• [U-Boot] [PATCH] mx31pdk: Change maintainer   Tom Rini
• [U-Boot] Please pull u-boot-x86.git branch buildman   Tom Rini
• [U-Boot] Please pull u-boot-x86.git branch buildman   Tom Rini
• [U-Boot] [PATCH v2 1/4] arm64: Correct passing of Linux kernel args   Tom Rini
• [U-Boot] [PATCH v2 2/4] cmd_bootm.c: Add 'booti' for ARM64 Linux kernel Images   Tom Rini
• [U-Boot] [PATCH v2 3/4] vexpress_aemv8a.h: Clean up the config   Tom Rini
• [U-Boot] [PATCH v2 4/4] vexpress_aemv8a.h: Enable CONFIG_CMD_BOOTI and CONFIG_CMD_UNZIP   Tom Rini
• [U-Boot] [PATCH v2 2/4] cmd_bootm.c: Add 'booti' for ARM64 Linux kernel Images   Tom Rini
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Tom Rini
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Tom Rini
• [U-Boot] [PATCH v2 3/3] bootm: use genimg_get_kernel_addr()   Tom Rini
• [U-Boot] [UBOOT RFC PATCH 00/13] DRA7xx: Add DWC3 USB driver and enable DFU   Tom Rini
• [U-Boot] [PATCH] net: BOOTP retry timeout improvements   Tom Rini
• [U-Boot] [PATCH v2] kconfig: convert Kconfig helper script into a shell script   Tom Rini
• [U-Boot] [PULL] u-boot/master   Tom Rini
• [U-Boot] Please pull u-boot-mpc85xx.git master   Tom Rini
• [U-Boot] Treat warnings different from errors in buildman?   Tom Rini
• [U-Boot] [UBOOT RFC PATCH 11/13] commom: usb: implement "__weak" functions to make compiler happy   Tom Rini
• [U-Boot] Treat warnings different from errors in buildman?   Tom Rini
• [U-Boot] Treat warnings different from errors in buildman?   Tom Rini
• [U-Boot] Treat warnings different from errors in buildman?   Tom Rini
• [U-Boot] buildman: make-flags variables broken?   Tom Rini
• [U-Boot] [RFC PATCH] tools/buildman: Add env-flags section support   Tom Rini
• [U-Boot] [PATCH] buildman: refactor help message (This has been superseded !)   Tom Rini
• [U-Boot] [PATCH v3 1/2] image: fix bootm failure for FIT image   Tom Rini
• [U-Boot] [PATCH v3 1/2] image: fix bootm failure for FIT image   Tom Rini
• [U-Boot] buildman: make-flags variables broken?   Tom Rini
• [U-Boot] [RFC PATCH] tools/buildman: Add env-flags section support   Tom Rini
• [U-Boot] [PATCH v2] buildman: refactor help message   Tom Rini
• [U-Boot] [U-Boot,v2] drivers: net: remove dead drivers   Tom Rini
• [U-Boot] [U-Boot, 1/3] kbuild: move extra gcc checks to scripts/Makefile.extrawarn   Tom Rini
• [U-Boot] [U-Boot, 2/3] kbuild: sync mixed targets handling with Linux 3.16   Tom Rini
• [U-Boot] [U-Boot,3/3] scripts: objdiff: sync with Linux 3.16   Tom Rini
• [U-Boot] [U-Boot, 1/5] powerpc: mpc8xx: remove stxxtc board support   Tom Rini
• [U-Boot] [U-Boot,2/5] powerpc: mpc8xx: remove svm_sc8xx board   Tom Rini
• [U-Boot] [U-Boot, 3/5] powerpc: mpc8xx: remove SXNI855T board support   Tom Rini
• [U-Boot] [U-Boot, 4/5] powerpc: mpc8xx: remove GEN860T, GEN806T_SC board support   Tom Rini
• [U-Boot] [U-Boot, 5/5] powerpc: mpc8xx: remove FLAGADM board support   Tom Rini
• [U-Boot] davinci: orphan some Davinci boards   Tom Rini
• [U-Boot] tools/genboardscfg.py: Do not output SPLCPU field   Tom Rini
• [U-Boot] [U-Boot, v2, 1/2] cli: Export cli_simple_process_macros for use outside of cli_simple   Tom Rini
• [U-Boot] [U-Boot, v2, 2/2] pxe: Allow use of environment variables in append string   Tom Rini
• [U-Boot] [U-Boot, v3] tools: genboardscfg.py, no exception if columns undetectable   Tom Rini
• [U-Boot] [U-Boot,1/2] e1000: Implement dcache support   Tom Rini
• [U-Boot] [U-Boot,2/2] e1000: add i210 support   Tom Rini
• [U-Boot] [U-Boot,1/2] api: fix build without CMD_NET support   Tom Rini
• [U-Boot] add header for Android sparse image format   Tom Rini
• [U-Boot] Makefile: Use Kbuild style for system_map.o generation step   Tom Rini
• [U-Boot] [U-Boot, v2] README.kconfig: add initial version of Kconfig document   Tom Rini
• [U-Boot] [U-Boot, v2] tools, scripts: refactor error-out statements of Python scripts   Tom Rini
• [U-Boot] scripts/Lindent: import from Linux 3.16   Tom Rini
• [U-Boot] kconfig: remove DEFCONFIG_LIST   Tom Rini
• [U-Boot] [U-Boot, 2/3] image: move all function comments to header file   Tom Rini
• [U-Boot] [U-Boot, v3, 1/2] image: fix bootm failure for FIT image   Tom Rini
• [U-Boot] [U-Boot,2/2] bootm: make sure pass NULL when argc < 1   Tom Rini
• [U-Boot] [U-Boot, v2] net: More BOOTP retry timeout improvements   Tom Rini
• [U-Boot] [U-Boot, v4] Makefile: remove generated boards.cfg within make distclean   Tom Rini
• [U-Boot] [U-Boot, v3] kconfig: convert Kconfig helper script into a shell script   Tom Rini
• [U-Boot] patman: refactor help message   Tom Rini
• [U-Boot] git-mailrc: add patman and buildman alias   Tom Rini
• [U-Boot] [RFC PATCH v2 2/2] tools: make genboardscfg.py compatible with Python 2.5   Tom Rini
• [U-Boot] [U-Boot, v2, 01/15] omap: remove omap5912osk board support   Tom Rini
• [U-Boot] [PATCH 2/2] config_distro_defaults.h: add CONFIG_API   Tom Rini
• [U-Boot] [U-Boot, 2/3] image: move all function comments to header file   Tom Rini
• [U-Boot] [RFC PATCH] tools/buildman: Add env-flags section support   Tom Rini
• [U-Boot] Pull request: u-boot-nios/master   Tom Rini
• [U-Boot] Pull request: u-boot-staging   Tom Rini
• [U-Boot] [PATCH v9 0/14] Add some missing buildman features and deprecate MAKEALL   Tom Rini
• [U-Boot] [U-Boot, v2] buildman: Create parent directories as necessary   Tom Rini
• [U-Boot] [PATCH v9 11/14] buildman: Add an option to show which boards caused which errors   Tom Rini
• [U-Boot] [U-Boot, U-boot, v3, 1/3] mtd: nand: davinci: allow to change ecclayout by ecclayout command   Tom Rini
• [U-Boot] [U-Boot, U-boot, v3, 2/3] common: cmd_nand: add nand ecclayout command   Tom Rini
• [U-Boot] [U-Boot,1/5] am335x_evm: Move SPL network defines   Tom Rini
• [U-Boot] [U-Boot, v3, 2/5] TI:armv7: Change CONFIG_SPL_STACK to not be CONFIG_SYS_INIT_SP_ADDR   Tom Rini
• [U-Boot] [U-Boot, 3/5] tseries: Set CONFIG_ENV_IS_NOWHERE for SPL+NAND   Tom Rini
• [U-Boot] [U-Boot, 4/5] common/Makefile: Consolidate SPL ENV options, correct inclusion   Tom Rini
• [U-Boot] [U-Boot, 5/5] am335x_evm: Enable CONFIG_SPL_ENV_SUPPORT on EMMC_BOOT   Tom Rini
• [U-Boot] [U-Boot, v2, 1/6] board/ti/am335x: update configs for parallel NAND   Tom Rini
• [U-Boot] [U-Boot, v2, 2/6] board/ti/am335x: add support for beaglebone NAND cape   Tom Rini
• [U-Boot] [U-Boot, v2, 3/6] board/ti/am335x: add support for beaglebone NOR Cape   Tom Rini
• [U-Boot] [U-Boot, v2, 4/6] board/ti/am43xx: add support for parallel NAND   Tom Rini
• [U-Boot] [U-Boot, v2, 5/6] board/ti/dra7xx: add support for parallel NAND   Tom Rini
• [U-Boot] [U-Boot, v2, 6/6] board/ti/dra7xx: add support for parallel NOR   Tom Rini
• [U-Boot] [U-Boot, U-boot] keystone2: use EFUSE_BOOTROM information to configure PLLs   Tom Rini
• [U-Boot] [U-Boot, PATCHv2] pcm051: use ti_am335x_common.h config   Tom Rini
• [U-Boot] SOM: tam3517: convert to generic board   Tom Rini
• [U-Boot] ARM: DRA7: Enable software leveling for dra7   Tom Rini
• [U-Boot] [U-Boot, 1/3] cm-t54: fix EEPROM read return value check   Tom Rini
• [U-Boot] [U-Boot,2/3] cm-t54: fix eMMC boot mode check   Tom Rini
• [U-Boot] [U-Boot,3/3] cm-t54: convert to generic board   Tom Rini
• [U-Boot] [U-Boot, v2] am335x_evm: Convert CONFIG_CONS_INDEX into a menu choice   Tom Rini
• [U-Boot] [U-Boot,v2] ARM: DRA: Enable VTT regulator   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH v9 0/14] Add some missing buildman features and deprecate MAKEALL   Tom Rini
• [U-Boot] [U-Boot, U-boot, v3, 2/3] common: cmd_nand: add nand ecclayout command   Tom Rini
• [U-Boot] [PATCH v9 11/14] buildman: Add an option to show which boards caused which errors   Tom Rini
• [U-Boot] [PATCH v9 10/14] buildman: Remove the directory prefix from each error line   Tom Rini
• [U-Boot] [PATCH] net: cpsw: am335x: Drop constant link checking from rx/tx path's   Tom Rini
• [U-Boot] MMC interfaces on AM335x   Tom Rini
• [U-Boot] [RFC PATCH] USB: get rid of warning when compile with debug enabled   Tom Rini
• [U-Boot] [RFC PATCH] USB: get rid of warning when compile with debug enabled   Tom Rini
• [U-Boot] [PATCH] common: fix compiler warning on wrong printf format   Tom Rini
• [U-Boot] [PATCH v9 0/14] Add some missing buildman features and deprecate MAKEALL   Tom Rini
• [U-Boot] [PATCH v9 11/14] buildman: Add an option to show which boards caused which errors   Tom Rini
• [U-Boot] [PATCH v5 0/4] Implement "fastboot flash" for eMMC   Tom Rini
• [U-Boot] [U-Boot,v5,1/5] lib, rbtree: resync with Linux-3.14   Tom Rini
• [U-Boot] [U-Boot, v5, 2/5] lib, list_sort: add list_sort from linux 3.14   Tom Rini
• [U-Boot] [U-Boot,v5,3/5] linux include: add ERR_CAST   Tom Rini
• [U-Boot] [U-Boot, v5, 4/5] lib, linux: move linux specific defines to linux/compat.h   Tom Rini
• [U-Boot] [U-Boot, v5, 5/5] mtd, ubi, ubifs: resync with Linux-3.14   Tom Rini
• [U-Boot] [U-Boot, v1, 1/2] mtd, ubi, ubifs: update for the sync with linux v3.14   Tom Rini
• [U-Boot] [U-Boot,v1,2/2] mtd,ubi,ubifs: sync with linux v3.15   Tom Rini
• [U-Boot] [RFC PATCH] USB: get rid of warning when compile with debug enabled   Tom Rini
• [U-Boot] Should ARM custodian tree pull-reqs still go through the ARM tree ?   Tom Rini
• [U-Boot] Please pull u-boot-x86.git branch patman   Tom Rini
• [U-Boot] Please pull u-boot-arm/master   Tom Rini
• [U-Boot] [U-Boot, v1, 3/4] cleanup code which handles the Android sparse image format   Tom Rini
• [U-Boot] [U-Boot, v1, 3/4] cleanup code which handles the Android sparse image format   Tom Rini
• [U-Boot] [PATCH v2 3/4] cleanup code which handles the Android sparse image format   Tom Rini
• [U-Boot] samsung: s5p_goni: fix: Add missing definitions for G_DNL_UMS gadget   Tom Rini
• [U-Boot] Please pull u-boot-arm/master   Tom Rini
• [U-Boot] [PATCH 0/8] U-Boot port to Xtensa architecture   Tom Rini
• [U-Boot] [PATCH v2 07/15] exynos: kconfig: move board select menu and common settings   Tom Rini
• [U-Boot] [PATCH v2 1/4] add code to handle Android sparse image format   Tom Rini
• [U-Boot] Current ARM imports TODO list   Tom Rini
• [U-Boot] [PATCH v2 07/15] exynos: kconfig: move board select menu and common settings   Tom Rini
• [U-Boot] tools/genboardscfg.py: fix a bug of MAINTAINERS handling   Tom Rini
• [U-Boot] [U-Boot, 1/2] MAKEALL: run genboardscfg.py all the time   Tom Rini
• [U-Boot] [U-Boot, 2/2] buildman: run genboardscfg.py all the time   Tom Rini
• [U-Boot] [U-Boot, 1/3] kconfig: add CONFIG_LOCALVERSION and CONFIG_LOCALVERSION_AUTO   Tom Rini
• [U-Boot] [U-Boot, 2/3] scripts: refetch scripts/setlocalversion from Linux 3.16   Tom Rini
• [U-Boot] [U-Boot,3/3] kconfig: add CONFIG_CC_OPTIMIZE_FOR_SIZE   Tom Rini
• [U-Boot] [U-Boot, v3, 1/7] tools/genboardscfg.py: ignore defconfigs starting with a dot   Tom Rini
• [U-Boot] [U-Boot, 1/2] Fix test failure caused by bad handling of ramdisk   Tom Rini
• [U-Boot] [U-Boot, 2/2] Correct sandbox filesystem commands in FIT image test   Tom Rini
• [U-Boot] [U-Boot, v3, 2/7] tools/genboardscfg.py: be tolerant of missing MAINTAINERS   Tom Rini
• [U-Boot] [U-Boot, v3, 3/7] tools/genboardscfg.py: be tolerant of insane Kconfig   Tom Rini
• [U-Boot] [U-Boot, v3, 4/7] tools/genboardscfg.py: wait for unfinished subprocesses before error-out   Tom Rini
• [U-Boot] [U-Boot, v3, 5/7] tools/genboardscfg.py: fix minor problems on termination   Tom Rini
• [U-Boot] [U-Boot, v3, 6/7] tools/genboardscfg.py: check if the boards.cfg is up to date   Tom Rini
• [U-Boot] [U-Boot, v3, 7/7] tools/genboardscfg.py: improve performance   Tom Rini
• [U-Boot] net: cpsw: am335x: Drop constant link checking from rx/tx path's   Tom Rini
• [U-Boot] tools/genboardscfg.py: change shebang into /usr/bin/env python2   Tom Rini
• [U-Boot] [U-Boot, v2] README.kconfig: document backward compatibility "make *_config"   Tom Rini
• [U-Boot] [PATCH v2 1/4] add code to handle Android sparse image format   Tom Rini
• [U-Boot] [PULL] u-boot/master   Tom Rini
• [U-Boot] [U-Boot,GIT,PULL] Zynq patches   Tom Rini
• [U-Boot] Please pull u-boot-sunxi.git/master   Tom Rini
• [U-Boot] [U-Boot,PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] pull request for u-boot-tegra/master into ARM/master   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH] nand/denali: Adding Denali NAND driver support   Tom Rini
• [U-Boot] [U-Boot,1/3] arm: pxa: use common timer functions   Tom Rini
• [U-Boot] ARM:asm:io.h use static inline   Tom Rini
• [U-Boot] arm: include config.h in arch/arm/lib/vectors.S   Tom Rini
• [U-Boot] [U-Boot, PATCHv3] socfpga: initialize designware ethernet   Tom Rini
• [U-Boot] socfpga: fix clock manager register definition   Tom Rini
• [U-Boot] [U-Boot,PATCHv2] socfpga: cleanup socfpga_dw_mmc   Tom Rini
• [U-Boot] socfpga: Fix SOCFPGA build error for Altera dev kit   Tom Rini
• [U-Boot] arm: ep9315: Add .vectors section to lds and remove obsolete lds   Tom Rini
• [U-Boot] ARM: enable ARMv7 virt support for the Arndale board   Tom Rini
• [U-Boot] [U-Boot, v2, 1/3] arm: bcm281xx: Add Ethernet Clock support   Tom Rini
• [U-Boot] [U-Boot, v2, 2/3] arm: bcm281xx: net: Add Ethernet Driver   Tom Rini
• [U-Boot] [U-Boot, v2, 3/3] arm: bcm281xx: add board with Ethernet capability   Tom Rini
• [U-Boot] ARM: Fix overflow in MMU setup   Tom Rini
• [U-Boot] MAINTAINERS: change the status of vexpress board to Orphan   Tom Rini
• [U-Boot] [U-Boot,1/4] arm: vf610: add NFC pin mux   Tom Rini
• [U-Boot] [U-Boot,2/4] arm: vf610: add NFC clock support   Tom Rini
• [U-Boot] [U-Boot, v3, 1/5] arm: iproc: Initial commit of iproc architecture code   Tom Rini
• [U-Boot] [U-Boot, v3, 2/5] arm: bcmcygnus: Add bcmcygnus u-architecture   Tom Rini
• [U-Boot] [U-Boot, v3, 3/5] arm: bcmnsp: Add bcmnsp u-architecture   Tom Rini
• [U-Boot] [U-Boot,v3,4/5] arm: add Cygnus and NSP boards   Tom Rini
• [U-Boot] [U-Boot, v3, 5/5] arm: convert Cygnus and NSP boards to Kconfig   Tom Rini
• [U-Boot] [U-Boot, v2, 1/4] arm64: Correct passing of Linux kernel args   Tom Rini
• [U-Boot] [U-Boot, v2, 2/4] cmd_bootm.c: Add 'booti' for ARM64 Linux kernel Images   Tom Rini
• [U-Boot] [U-Boot, v2, 3/4] vexpress_aemv8a.h: Clean up the config   Tom Rini
• [U-Boot] [U-Boot, v2, 4/4] vexpress_aemv8a.h: Enable CONFIG_CMD_BOOTI and CONFIG_CMD_UNZIP   Tom Rini
• [U-Boot] [U-Boot, 1/2] arm/kirkwood/nand: allow forced disabling for subpage writes   Tom Rini
• [U-Boot] [U-Boot, 2/2] arm/km: disable subpage write for km_kirkwood_pci and kmsuv31 target   Tom Rini
• [U-Boot] [U-Boot, v2] arm: Add missing .vectors section to linker scripts   Tom Rini
• [U-Boot] [PATCH v7 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Tom Rini
• [U-Boot] [PATCH v3 01/14] zynq: kconfig: move board select menu and common settings   Tom Rini
• [U-Boot] [PATCH v3 02/14] tegra: kconfig: move board select menu and common settings   Tom Rini
• [U-Boot] [PATCH v3 03/14] rmobile: kconfig: move board select menu and common settings   Tom Rini
• [U-Boot] [PATCH v3 04/14] versatile: kconfig: move common settings   Tom Rini
• [U-Boot] [PATCH v3 05/14] kirkwood: kconfig: refactor Kconfig and defconfig   Tom Rini
• [U-Boot] [PATCH v3 06/14] exynos: kconfig: move board select menu and common settings   Tom Rini
• [U-Boot] [PATCH v3 07/14] davinci: kconfig: move board select menu and common settings   Tom Rini
• [U-Boot] [PATCH v3 08/14] omap3: kconfig: move board select menu and common settings   Tom Rini
• [U-Boot] [PATCH v3 09/14] omap4: kconfig: move board select menu and common settings   Tom Rini
• [U-Boot] [PATCH v3 10/14] omap5: kconfig: move board select menu and common settings   Tom Rini
• [U-Boot] [PATCH v3 11/14] keystone: kconfig: move board select menu and common settings   Tom Rini
• [U-Boot] [PATCH v3 12/14] orion5x: kconfig: move board select menu and common settings   Tom Rini
• [U-Boot] [PATCH v3 13/14] highbank: kconfig: move common settings   Tom Rini
• [U-Boot] [PATCH v3 14/14] nomadik: kconfig: move board select menu and common settings   Tom Rini
• [U-Boot] Pull request: u-boot-nios/master   Tom Rini
• [U-Boot] [PATCH] mx6: tqma6: get board support back to Kconfig build system   Tom Rini
• [U-Boot] [PATCH] arm: am335x: add Kconfig range attribute to prevent invalid CONS_INDEX   Tom Rini
• [U-Boot] [linux-sunxi] Re: [PATCH] video: add cfb console driver for sunxi   Maxime Ripard
• [U-Boot] [linux-sunxi] Re: [PATCH] video: add cfb console driver for sunxi   Maxime Ripard
• [U-Boot] [linux-sunxi] Re: [PATCH] video: add cfb console driver for sunxi   Maxime Ripard
• [U-Boot] [linux-sunxi] Re: [PATCH] video: add cfb console driver for sunxi   Maxime Ripard
• [U-Boot] [PATCH v2 0/25] Add Marvell Armada XP MV78460 SoC support   Stefan Roese
• [U-Boot] [PATCH v2 01/25] sf: Add M25PX64 SPI NOR flash ID   Stefan Roese
• [U-Boot] [PATCH v2 02/25] arm: kirkwood: spi.h: Add some missing parenthesis   Stefan Roese
• [U-Boot] [PATCH v2 03/25] spi: kirkwood_spi.c: Some fixes and cleanup   Stefan Roese
• [U-Boot] [PATCH v2 04/25] spi: kirkwood_spi.c: Make global variable static   Stefan Roese
• [U-Boot] [PATCH v2 05/25] spi: kirkwood_spi.c: cosmetic: Fix minor coding style issues   Stefan Roese
• [U-Boot] [PATCH v2 06/25] arm: kirkwood: Move some SoC files into new arch/arm/mvebu-common   Stefan Roese
• [U-Boot] [PATCH v2 07/25] arm: marvell: Move arch/kirkwood.h to arch/soc.h   Stefan Roese
• [U-Boot] [PATCH v2 08/25] arm: marvell: Move arch-kirkwood/spi.h to arch-mvebu/spi.h   Stefan Roese
• [U-Boot] [PATCH v2 09/25] arm: marvell: Rework timer.c to make it usable for other MVEBU platforms   Stefan Roese
• [U-Boot] [PATCH v2 10/25] arm: mvebu: Add common mbus functions to use on Marvell SoCs   Stefan Roese
• [U-Boot] [PATCH v2 11/25] spi: kirkwood_spi.c: Compile MPP (pin-mux) only for kirkwood SoC's   Stefan Roese
• [U-Boot] [PATCH v2 12/25] arm: marvell: Extract kirkwood gpio functions into new common file gpio.c   Stefan Roese
• [U-Boot] [PATCH v2 13/25] spi: kirkwood_spi.c: Change KW_SPI_BASE to MVEBU_SPI_BASE   Stefan Roese
• [U-Boot] [PATCH v2 14/25] arm: kirkwood: Change naming of dram functions from km_foo() to mvebu_foo()   Stefan Roese
• [U-Boot] [PATCH v2 15/25] net: mvneta.c: Add support for the ethernet controller of the Marvell Armada XP SoC   Stefan Roese
• [U-Boot] [PATCH v2 16/25] net: phy.h: Make PHY autonegotiation timeout configurable   Stefan Roese
• [U-Boot] [PATCH v2 17/25] i2c: mvtwsi: Add support for Marvell Armada XP   Stefan Roese
• [U-Boot] [PATCH v2 18/25] arm: armada-xp: Add basic support for Marvell Armada XP SoC   Stefan Roese
• [U-Boot] [PATCH v2 19/25] arm: armada-xp: Add basic support for the Marvell DB-MV784MP-GP board   Stefan Roese
• [U-Boot] [PATCH v2 20/25] arm: armada-xp: Add basic support for the maxBCM board   Stefan Roese
• [U-Boot] [PATCH v2 21/25] arm: kirkwood: Remove some dead code from cpu.c   Stefan Roese
• [U-Boot] [PATCH v2 22/25] tools/kwboot: Sync with latest barebox version to support Armada XP   Stefan Roese
• [U-Boot] [PATCH v2 23/25] tools: Compile kwboot for Marvell Armada XP as those SoCs are now supported   Stefan Roese
• [U-Boot] [PATCH v2 24/25] tools: kwbimage: Add image version 1 support for Armada XP / 370   Stefan Roese
• [U-Boot] [PATCH v2 25/25] Makefile: Add CONFIG_BUILD_TARGET to automatically build an special image   Stefan Roese
• [U-Boot] [PATCH 3/4] arm: debug: import debug files from Linux 3.16   Stefan Roese
• [U-Boot] [PATCH v2 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Stefan Roese
• [U-Boot] [PATCH] nios2: add generic board support   Stefan Roese
• [U-Boot] [PATCH v5 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Stefan Roese
• [U-Boot] [PATCH] net: cpsw: am335x: Drop constant link checking from rx/tx path's   Stefan Roese
• [U-Boot] [PATCH] mvebu_mmc: Driver addition   Stefan Roese
• [U-Boot] [PATCH] mvebu_mmc: Driver addition   Stefan Roese
• [U-Boot] [PATCH v2] mvebu_mmc: Driver addition   Stefan Roese
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Måns Rullgård
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Måns Rullgård
• [U-Boot] [PATCH] ARM: HYP/non-sec: Add MIDR check to detect unsupported CPUs   Mark Rutland
• [U-Boot] [PATCH v2 2/4] cmd_bootm.c: Add 'booti' for ARM64 Linux kernel Images   Mark Rutland
• [U-Boot] [PATCH v2 2/4] cmd_bootm.c: Add 'booti' for ARM64 Linux kernel Images   Mark Rutland
• [U-Boot] [PATCH v5 01/16] arm: ls102xa: Add Freescale LS102xA SoC support   Mark Rutland
• [U-Boot] [PATCH v5 01/16] arm: ls102xa: Add Freescale LS102xA SoC support   Mark Rutland
• [U-Boot] [Patch v2 3/5] armv8/fsl-lsch3: Release secondary cores from boot hold off with Boot Page   Mark Rutland
• [U-Boot] [Patch v2 3/5] armv8/fsl-lsch3: Release secondary cores from boot hold off with Boot Page   Mark Rutland
• [U-Boot] [Patch v2 3/5] armv8/fsl-lsch3: Release secondary cores from boot hold off with Boot Page   Mark Rutland
• [U-Boot] [Patch v2 3/5] armv8/fsl-lsch3: Release secondary cores from boot hold off with Boot Page   Mark Rutland
• [U-Boot] [PATCH 2/8] ARM: PSCI: Alow arch specific DT patching   Mark Rutland
• [U-Boot] [PATCH 5/8] ARMv8: PCSI: Add generic ARMv8 PSCI code   Mark Rutland
• [U-Boot] [PATCH 6/8] ARMv8: PSCI: Fixup the device tree for PSCI v0.2   Mark Rutland
• [U-Boot] [PATCH 2/8] ARM: PSCI: Alow arch specific DT patching   Mark Rutland
• [U-Boot] [PATCH 3/3] driver/mc: print Management Complex version info   Otavio Salvador
• [U-Boot] [PATCH] vf610twr: Tune DDR initialization settings   Otavio Salvador
• [U-Boot] [PATCH 6/6] warp: Add initial WaRP Board support   Otavio Salvador
• [U-Boot] [PATCH 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Otavio Salvador
• [U-Boot] [PATCH 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Otavio Salvador
• [U-Boot] [PATCH v2 2/2] net: fec_mxc: Do not error out when FEC_TBD_READY   Otavio Salvador
• [U-Boot] [PATCH v3 3/3] mx6sxsabresd: Add PCI support   Otavio Salvador
• [U-Boot] [PATCH v3 3/3] mx6sxsabresd: Add PCI support   Otavio Salvador
• [U-Boot] enabling ecc on P2041 and QoreIQ familly not valid for memory >= 4GB   Benoit Sansoni
• [U-Boot] [RFC PATCH 0/1] SPL JTAG boot mode   Ezra Savard
• [U-Boot] [PATCH v2 17/25] i2c: mvtwsi: Add support for Marvell Armada XP   Heiko Schocher
• [U-Boot] [PATCH 2/3] mtd, nand: move common functions from cmd_nand.c to common place   Heiko Schocher
• [U-Boot] [PATCH] Update aristainetos board to Kconfig   Heiko Schocher
• [U-Boot] [PATCH] tools: fix typo in tools/image-host.c   Heiko Schocher
• [U-Boot] [PATCH] tools, fit_info: increase buffer for command name   Heiko Schocher
• [U-Boot] dfu: some wrong usb_qualifier_descriptor settings?   Heiko Schocher
• [U-Boot] dfu: some wrong usb_qualifier_descriptor settings?   Heiko Schocher
• [U-Boot] [PATCH v2 11/40] i2c: Initialize the correct bus   Heiko Schocher
• [U-Boot] [PATCH v2 13/40] i2c: Add high-level API   Heiko Schocher
• [U-Boot] [PATCH v2 15/40] power: Add AMS AS3722 PMIC support   Heiko Schocher
• [U-Boot] [PATCH v2 11/40] i2c: Initialize the correct bus   Heiko Schocher
• [U-Boot] [PATCH v2 13/40] i2c: Add high-level API   Heiko Schocher
• [U-Boot] [PATCH v2 15/40] power: Add AMS AS3722 PMIC support   Heiko Schocher
• [U-Boot] [PATCH v2 13/40] i2c: Add high-level API   Heiko Schocher
• [U-Boot] [PATCH v2 13/40] i2c: Add high-level API   Heiko Schocher
• [U-Boot] [PATCH] mvebu_mmc: Driver addition   Mario Schuknecht
• [U-Boot] [PATCH] mvebu_mmc: Driver addition   Mario Schuknecht
• [U-Boot] [PATCH v2] mvebu_mmc: Driver addition   Mario Schuknecht
• [U-Boot] [PATCH v1 2/4] get_maintainer.pl: import script from linux 3.15   Daniel Schwierzeck
• [U-Boot] [PATCH v3 0/4] introduce get_maintainer.pl   Daniel Schwierzeck
• [U-Boot] [PATCH v3 1/4] MAINTAINERS: add initial version   Daniel Schwierzeck
• [U-Boot] [PATCH v3 2/4] get_maintainer.pl: import script from linux 3.15   Daniel Schwierzeck
• [U-Boot] [PATCH v3 3/4] get_maintainer.pl: adapt to U-Boot tree   Daniel Schwierzeck
• [U-Boot] [PATCH v3 4/4] get_maintainer.pl: add support for scanning multiple MAINTAINERS files   Daniel Schwierzeck
• [U-Boot] [PATCH 06/25] dm: spi: Add a uclass for SPI   Daniel Schwierzeck
• [U-Boot] Recommended MIPS toolchain   Daniel Schwierzeck
• [U-Boot] Recommended MIPS toolchain   Daniel Schwierzeck
• [U-Boot] Treat warnings different from errors in buildman?   Daniel Schwierzeck
• [U-Boot] Treat warnings different from errors in buildman?   Daniel Schwierzeck
• [U-Boot] [PATCH v8] nand/denali: Adding Denali NAND driver support   Chin Liang See
• [U-Boot] [U-Boot, v8] nand/denali: Adding Denali NAND driver support   Chin Liang See
• [U-Boot] [PATCH] nand/denali: Adding Denali NAND driver support   Chin Liang See
• [U-Boot] [PATCH] ARM: atmel: sama5d3: add timings register   Bo Shen
• [U-Boot] [PATCH 0/4] ARM: atmel: use pcr to control clock   Bo Shen
• [U-Boot] [PATCH 1/4] ARM: atmel: use pcr to enable or disable peripheral clock   Bo Shen
• [U-Boot] [PATCH 2/4] ARM: atmel: add pcr related definition   Bo Shen
• [U-Boot] [PATCH 3/4] USB: ohci-at91: use pcr to enable or disable clock   Bo Shen
• [U-Boot] [PATCH 4/4] USB: ehci-atmel: use pcr to enable or disable clock   Bo Shen
• [U-Boot] [RFC PATCH] USB: get rid of warning when compile with debug enabled   Bo Shen
• [U-Boot] [RFC PATCH] USB: get rid of warning when compile with debug enabled   Bo Shen
• [U-Boot] [RFC PATCH] USB: get rid of warning when compile with debug enabled   Bo Shen
• [U-Boot] [PATCH 1/2] USB: gadget: atmel: get rid of debug compile warning   Bo Shen
• [U-Boot] [PATCH 2/2] USB: gadget: s3c: get rid of debug compile warning   Bo Shen
• [U-Boot] [RFC PATCH] USB: get rid of warning when compile with debug enabled   Bo Shen
• [U-Boot] [PATCH v2 00/16] sunxi: Allwinner A10/A13/A20 DRAM controller fixes   Siarhei Siamashka
• [U-Boot] [PATCH v2 01/16] sunxi: dram: Remove useless 'dramc_scan_dll_para()' function   Siarhei Siamashka
• [U-Boot] [PATCH v2 02/16] sunxi: dram: Remove broken super-standby remnants   Siarhei Siamashka
• [U-Boot] [PATCH v2 03/16] sunxi: dram: Respect the DDR3 reset timing requirements   Siarhei Siamashka
• [U-Boot] [PATCH v2 04/16] sunxi: dram: Fix CKE delay handling for sun4i/sun5i   Siarhei Siamashka
• [U-Boot] [PATCH v2 05/16] sunxi: dram: Remove broken impedance and ODT configuration code   Siarhei Siamashka
• [U-Boot] [PATCH v2 06/16] sunxi: dram: Do DDR3 reset in the same way on sun4i/sun5i/sun7i   Siarhei Siamashka
• [U-Boot] [PATCH v2 07/16] sunxi: dram: Add 'await_bits_clear'/'await_bits_set' helper functions   Siarhei Siamashka
• [U-Boot] [PATCH v2 08/16] sunxi: dram: Re-introduce the impedance calibration ond ODT   Siarhei Siamashka
• [U-Boot] [PATCH v2 09/16] sunxi: dram: Configurable MBUS clock speed (use PLL5 or PLL6)   Siarhei Siamashka
• [U-Boot] [PATCH v2 10/16] sunxi: dram: Use divisor P=1 for PLL5   Siarhei Siamashka
• [U-Boot] [PATCH v2 11/16] sunxi: dram: Improve DQS gate data training error handling   Siarhei Siamashka
• [U-Boot] [PATCH v2 12/16] sunxi: dram: Add a helper function 'mctl_get_number_of_lanes'   Siarhei Siamashka
• [U-Boot] [PATCH v2 13/16] sunxi: dram: Configurable DQS gating window mode and delay   Siarhei Siamashka
• [U-Boot] [PATCH v2 14/16] sunxi: dram: Drop DDR2 support and assume only single rank DDR3 memory   Siarhei Siamashka
• [U-Boot] [PATCH v2 15/16] sunxi: dram: Derive write recovery delay from DRAM clock speed   Siarhei Siamashka
• [U-Boot] [PATCH v2 16/16] sunxi: dram: Autodetect DDR3 bus width and density   Siarhei Siamashka
• [U-Boot] [PATCH] ARM: HYP/non-sec: Add MIDR check to detect unsupported CPUs   Siarhei Siamashka
• [U-Boot] [PATCH 0/2] sunxi: Single u-boot binary for Allwinner A10/A13/A20 devices   Siarhei Siamashka
• [U-Boot] [PATCH 1/2] sunxi: Replace CONFIG_SUN[457]I ifdefs with SOC_IS_SUN[457]I() calls   Siarhei Siamashka
• [U-Boot] [PATCH 2/2] sunxi: Universal Allwinner A10/A13/A20 u-boot binary support   Siarhei Siamashka
• [U-Boot] [PATCH v4 4/5] usb/gadget: fastboot: add sparse image definitions   Sebastian Andrzej Siewior
• [U-Boot] [PATCH v4 4/5] usb/gadget: fastboot: add sparse image definitions   Sebastian Andrzej Siewior
• [U-Boot] [PATCH] zynq: spl: Add vectors section to linker script   Michal Simek
• [U-Boot] [PATCH 0/15] arm: kconfig: move board select menus and other settings to SoC dir   Michal Simek
• [U-Boot] [PATCH v2 02/15] zynq: kconfig: move board select menu and commonsettings   Michal Simek
• [U-Boot] [PATCH v2 02/15] zynq: kconfig: move board select menu and commonsettings   Michal Simek
• [U-Boot] [PATCH v2 02/15] zynq: kconfig: move board select menu and commonsettings   Michal Simek
• [U-Boot] [PATCH v2 02/15] zynq: kconfig: move board select menu and commonsettings   Michal Simek
• [U-Boot] [PATCH v2 02/15] zynq: kconfig: move board select menu and commonsettings   Michal Simek
• [U-Boot] [PATCH] zynq: spl: Add vectors section to linker script   Michal Simek
• [U-Boot] [RFC PATCH 0/1] SPL JTAG boot mode   Michal Simek
• [U-Boot] [RFC PATCH] ARM: spl: Introduce JTAG mode   Michal Simek
• [U-Boot] [PATCH 1/2] ARM: zynq: Move ps7_init() out of spl.h   Michal Simek
• [U-Boot] [PATCH 2/2] ARM: zynq: Remove spl.h   Michal Simek
• [U-Boot] [RFC PATCH 0/1] SPL JTAG boot mode   Michal Simek
• [U-Boot] [PATCH] kconfig: remove DEFCONFIG_LIST   Michal Simek
• [U-Boot] [GIT PULL] Zynq patches   Michal Simek
• [U-Boot] [PATCH] arm: zynq: Add compile time boot mode override   Michal Simek
• [U-Boot] [PATCH] arm: zynq: Add compile time boot mode override   Michal Simek
• [U-Boot] [PATCH 2/3] configs: zynq: Add config support for ZYBO   Michal Simek
• [U-Boot] [GIT PULL] Zynq patches   Michal Simek
• [U-Boot] [PATCH 0/3] ARM: Zynq: Add ZYBO board   Michal Simek
• [U-Boot] [PATCH v2] arm: Add missing .vectors section to linker scripts   Michal Simek
• [U-Boot] [PATCH 0/8] U-Boot port to Xtensa architecture   Michal Simek
• [U-Boot] [PATCH v4 1/2] blackfin: convert blackfin board_f and board_r to use generic board init functions   Michal Simek
• [U-Boot] [PATCH 0/8] U-Boot port to Xtensa architecture   Michal Simek
• [U-Boot] [PATCH v5 09/15] tools: add genboardscfg.py   Gerhard Sittig
• [U-Boot] [linux-sunxi] Re: [PATCH] video: add cfb console driver for sunxi   Michal Suchanek
• [U-Boot] [linux-sunxi] Re: [PATCH] video: add cfb console driver for sunxi   Michal Suchanek
• [U-Boot] U-boot for Banana Pi   Michal Suchanek
• [U-Boot] Please pull u-boot-mpc85xx.git master   York Sun
• [U-Boot] [PATCH 1/2] driver/ddr: Restruct driver to allow standalone memory space   York Sun
• [U-Boot] [PATCH 2/2] ARMv8/ls2085a_emu: Enable DP-DDR as standalone memory block   York Sun
• [U-Boot] CPU Wachtog for P2041   York Sun
• [U-Boot] Removing the need for boards.cfg   York Sun
• [U-Boot] Removing the need for boards.cfg   York Sun
• [U-Boot] [PATCH v4 13/13] RFC: Deprecate MAKEALL   York Sun
• [U-Boot] [PATCH v4 13/13] RFC: Deprecate MAKEALL   York Sun
• [U-Boot] [PATCH v4 13/13] RFC: Deprecate MAKEALL   York Sun
• [U-Boot] [PATCH v4 13/13] RFC: Deprecate MAKEALL   York Sun
• [U-Boot] [PATCH v4 13/13] RFC: Deprecate MAKEALL   York Sun
• [U-Boot] [PATCH v4 02/13] buildman: Add some notes about moving from MAKEALL   York Sun
• [U-Boot] [PATCH v4 02/13] buildman: Add some notes about moving from MAKEALL   York Sun
• [U-Boot] [PATCH v4 02/13] buildman: Add some notes about moving from MAKEALL   York Sun
• [U-Boot] [PATCH] powerpc/t1040qds: Remove Video - HDMI support   York Sun
• [U-Boot] [PATCH] powerpc/mpc85xx: Enabling CPC conditionally based on hwconfig options   York Sun
• [U-Boot] [PATCH v2 09/10] arm: ls102xa: Add basic support for LS1021AQDS board   York Sun
• [U-Boot] [PATCH v8 02/13] kconfig: add board Kconfig and defconfig files   York Sun
• [U-Boot] [PATCH v2 04/10] arm: ls102xa: Add etsec support for LS102xA   York Sun
• [U-Boot] [PATCH v2 05/10] arm: ls102xa: Add esdhc support for LS102xA   York Sun
• [U-Boot] [PATCH v2 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS/TWR board support   York Sun
• [U-Boot] [PATCH v8 02/13] kconfig: add board Kconfig and defconfig files   York Sun
• [U-Boot] Removing the need for boards.cfg   York Sun
• [U-Boot] Removing the need for boards.cfg   York Sun
• [U-Boot] [PATCH v5 12/13] buildman: Introduce an 'and' operator for board selection   York Sun
• [U-Boot] [PATCH v4 13/13] RFC: Deprecate MAKEALL   York Sun
• [U-Boot] [PATCH v4 13/13] RFC: Deprecate MAKEALL   York Sun
• [U-Boot] [PATCH v6 16/20] patman: buildman: Correct spelling of 'colour'   York Sun
• [U-Boot] [PATCH v6 12/20] buildman: Introduce an 'and' operator for board selection   York Sun
• [U-Boot] [PATCH v6 13/20] buildman: Allow selection of the number of commits to build   York Sun
• [U-Boot] [PATCH v6 20/20] RFC: Deprecate MAKEALL   York Sun
• [U-Boot] [PATCH] kmp204x: set the ZL clk chips reset to power up only   York Sun
• [U-Boot] [PATCH] km-powerpc: define CONFIG_PRAM to protect PHRAM and PNVRAM   York Sun
• [U-Boot] enabling ecc on P2041 and QoreIQ familly not valid for memory >= 4GB   York Sun
• [U-Boot] [PATCH v3] powerpc/t104xrdb: Add T1042RDB board support   York Sun
• [U-Boot] [PATCH 1/2] powerpc/t2080qds: fixup dtb for 10g-kr   York Sun
• [U-Boot] [PATCH 2/2] powerpc/t2080qds: fix dtb when runnig 1000BASE-KX protocol   York Sun
• [U-Boot] [PATCH] powerpc/T4240QDS/eth: some fix for XFI   York Sun
• [U-Boot] [PATCH v2] kmp204x: reset the Zarlink clocking chips at power up only   York Sun
• [U-Boot] [Patch v2, 2/2] ARMv8/ls2085a_emu: Enable DP-DDR as standalone memory block   York Sun
• [U-Boot] [PATCH] powerpc/t4qds: Move doc/README.t4240qds under board/freescale/t4qds   York Sun
• [U-Boot] [PATCH v4 04/18] net: mdio: Add private MDIO read/write function   York Sun
• [U-Boot] [PATCH v4 02/18] ls102xa: i2c: Add i2c support for LS102xA   York Sun
• [U-Boot] [PATCH v4 16/18] video: dcu: Add Sii9022A HDMI Transmitter support   York Sun
• [U-Boot] [PATCH v4 15/18] arm: ls102xa: Add LETECH support for LS1021AQDS/TWR board   York Sun
• [U-Boot] how to read the buildman report   York Sun
• [U-Boot] how to read the buildman report   York Sun
• [U-Boot] [PATCH v2 3/3] bootm: use genimg_get_kernel_addr()   York Sun
• [U-Boot] [PATCH v2 3/3] bootm: use genimg_get_kernel_addr()   York Sun
• [U-Boot] [PATCH v2 3/3] bootm: use genimg_get_kernel_addr()   York Sun
• [U-Boot] [PATCH v7 5/5] RFC: Deprecate MAKEALL   York Sun
• [U-Boot] [PATCH] image: fix bootm failure for FIT image   York Sun
• [U-Boot] [PATCH] image: fix bootm failure for FIT image   York Sun
• [U-Boot] [PATCH 2/3] image: move all function comments to header file   York Sun
• [U-Boot] [PATCH 2/3] image: move all function comments to header file   York Sun
• [U-Boot] [PATCH v3] powerpc/85xx: enable some P1/P2 boards mtdparts for nor flash   York Sun
• [U-Boot] [PATCH 0/4] Introduce low-level debug for ARM architecture   York Sun
• [U-Boot] [Patch v2 1/5] fdt_support: Move of_read_number to fdt_support.h   York Sun
• [U-Boot] [Patch v2 2/5] fdt_support: Make of_bus_default_count_cells non static   York Sun
• [U-Boot] [Patch v2 3/5] armv8/fsl-lsch3: Release secondary cores from boot hold off with Boot Page   York Sun
• [U-Boot] [Patch v2 4/5] ARMv8/ls2085a: Enable secondary cores   York Sun
• [U-Boot] [Patch v2 5/5] ARMv8/ls2085a: Move u-boot location to make room for RCW   York Sun
• [U-Boot] [PATCH v5 13/16] serial: lpuart: add 32-bit registers lpuart support   York Sun
• [U-Boot] [PATCH v5 15/16] ls102xa: dcu: Add platform support for DCU on LS1021ATWR board   York Sun
• [U-Boot] [PATCH v8 0/6] Add some missing buildman features and deprecate MAKEALL   York Sun
• [U-Boot] Please pull u-boot-mpc85xx.git master   York Sun
• [U-Boot] [PATCH v2 1/2] fsl/diu: ch7301 encoder split off from t1040qds/diu.c   York Sun
• [U-Boot] [PATCH v2 2/2] powerpc/t1042RDB: Add Video - HDMI support   York Sun
• [U-Boot] [PATCH 1/2] powerpc/mpc85xx: Make boot flag effective   York Sun
• [U-Boot] [PATCH 2/2] powerpc/t104xrdb: support deep sleep in SPI/SD boot   York Sun
• [U-Boot] [PATCH] powerpc/mpc85xx: Enabling CPC conditionally based on hwconfig options   York Sun
• [U-Boot] [PATCH] driver/qe: update status of QE microcode   York Sun
• [U-Boot] [PATCH v2] km-powerpc: define CONFIG_PRAM to protect PHRAM and PNVRAM   York Sun
• [U-Boot] [PATCH][v2] powerpc/T4240QDS/eth: some fix for XFI   York Sun
• [U-Boot] [PATCH v3] kmp204x: reset the Zarlink clocking chips at power up only   York Sun
• [U-Boot] [Patch v2 3/5] armv8/fsl-lsch3: Release secondary cores from boot hold off with Boot Page   York Sun
• [U-Boot] [PATCH] driver/ddr/fsl: Fix tXP and tCKE   York Sun
• [U-Boot] buildman with --exclude option   York Sun
• [U-Boot] [PATCH] powerpc/t1040qds: Remove Video - HDMI support   Timur Tabi
• [U-Boot] [PATCH 0/25] Introduce driver model support for SPI, SPI flash, cros_ec   Jagan Teki
• [U-Boot] [PATCH V4 01/19] spl: replace CONFIG_SPL_SPI_* with CONFIG_SF_DEFAULT_*   Jagan Teki
• [U-Boot] [PATCH V4 04/19] mtd: spi: add support for M25PE16 and M25PX16   Jagan Teki
• [U-Boot] [PATCH v2 08/25] arm: marvell: Move arch-kirkwood/spi.h to arch-mvebu/spi.h   Jagan Teki
• [U-Boot] [PATCH v2 11/25] spi: kirkwood_spi.c: Compile MPP (pin-mux) only for kirkwood SoC's   Jagan Teki
• [U-Boot] [PATCH v2 13/25] spi: kirkwood_spi.c: Change KW_SPI_BASE to MVEBU_SPI_BASE   Jagan Teki
• [U-Boot] [PATCH v2 0/25] Add Marvell Armada XP MV78460 SoC support   Jagan Teki
• [U-Boot] [PATCH V4 01/19] spl: replace CONFIG_SPL_SPI_* with CONFIG_SF_DEFAULT_*   Jagan Teki
• [U-Boot] [PATCH V4 04/19] mtd: spi: add support for M25PE16 and M25PX16   Jagan Teki
• [U-Boot] [PATCH V4 03/19] spi: mxc: fix sf probe when using mxc_spi   Jagan Teki
• [U-Boot] [PATCH 01/25] sandbox: Convert SPI flash emulation to use sf_params   Jagan Teki
• [U-Boot] [PATCH 02/25] sandbox: config: Enable all SPI flash chips   Jagan Teki
• [U-Boot] [PATCH 03/25] sandbox: dts: Add a SPI device and cros_ec device   Jagan Teki
• [U-Boot] [PATCH 05/25] spi: Add brackets and tidy defines in spi.h   Jagan Teki
• [U-Boot] [PATCH 04/25] dm: spi: Move cmd device code into its own function   Jagan Teki
• [U-Boot] [PATCH 06/25] dm: spi: Add a uclass for SPI   Jagan Teki
• [U-Boot] [PATCH 12/25] dm: spi: Add documentation on how to convert over SPI drivers   Jagan Teki
• [U-Boot] [PATCH 2/3] configs: zynq: Add config support for ZYBO   Jagan Teki
• [U-Boot] [PATCH 1/3] arm: dts: zynq: Add digilent ZYBO board dts   Jagan Teki
• [U-Boot] [PATCH 3/3] kconfig: zynq: Add ZYBO board   Jagan Teki
• [U-Boot] [PATCH] arm: zynq: Add compile time boot mode override   Jagan Teki
• [U-Boot] [PATCH] sf: Add support for flag status register on Micron chips   Jagan Teki
• [U-Boot] Pull request: u-boot-spi/master   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 1/2] sandbox: Update minor documentation changes   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 2/2] doc: Use KBUILD_OUTPUT instead of BUILD_DIR   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 1/2] sandbox: Update minor documentation changes   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 2/2] doc: Use KBUILD_OUTPUT instead of BUILD_DIR   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 0/8] zmx25: Add hardware support   Benoît Thébaudeau
• [U-Boot] [PATCH] arm: fix missing exception handling   Benoît Thébaudeau
• [U-Boot] SPL broken on i.mx31 platforms   Benoît Thébaudeau
• [U-Boot] [PATCH] arm: fix missing exception handling   Benoît Thébaudeau
• [U-Boot] [PATCH v2] arm: Add missing .vectors section to linker scripts   Benoît Thébaudeau
• [U-Boot] [PATCH] arm: fix missing exception handling   Benoît Thébaudeau
• [U-Boot] [PATCH] mx6: Fix cacheline size   Benoît Thébaudeau
• [U-Boot] [PATCH v6 4/4] usb/gadget: fastboot: implement sparse format   Michael Trimarchi
• [U-Boot] [PATCH v6 4/4] usb/gadget: fastboot: implement sparse format   Michael Trimarchi
• [U-Boot] [PATCH 6/7] sunxi: Kconfig: move common settings into a shared code block   Chen-Yu Tsai
• [U-Boot] [PATCH 23/23] ARM: tegra: Enable PCIe on Jetson TK1   Tuomas Tynkkynen
• [U-Boot] [PATCH 23/23] ARM: tegra: Enable PCIe on Jetson TK1   Tuomas Tynkkynen
• [U-Boot] [PATCH v3 1/4] usb/gadget: fastboot: add sparse image definitions   Marek Vasut
• [U-Boot] Pull request: u-boot-mmc 1/08/2014   Marek Vasut
• [U-Boot] Pull request: u-boot-mmc 1/08/2014   Marek Vasut
• [U-Boot] [PATCH 01/18] spl: improve spi configuration   Marek Vasut
• [U-Boot] [PATCH 03/18] sf: fix sf probe   Marek Vasut
• [U-Boot] [PATCH 04/18] mtd: spi: add support for M25PE16 and M25PX16   Marek Vasut
• [U-Boot] [PATCH 05/18] compulab: eeprom: add support for defining eeprom i2c bus   Marek Vasut
• [U-Boot] [PATCH 06/18] sata: dwc_ahsata: implement sata_port_status   Marek Vasut
• [U-Boot] [PATCH 12/18] arm: mx6: add support for Compulab cm-fx6 CoM   Marek Vasut
• [U-Boot] [PATCH 18/18] arm: mx6: cm_fx6: add sata support   Marek Vasut
• [U-Boot] [PATCH] usb: Handle -ENODEV from usb_lowlevel_init()   Marek Vasut
• [U-Boot] [PATCH] ARM: Fix overflow in MMU setup   Marek Vasut
• [U-Boot] [PATCH 1/4] ARM: mx5: Fix CHSCCDR name   Marek Vasut
• [U-Boot] [PATCH 2/4] ARM: mx6: Prevent overflow in DRAM size detection   Marek Vasut
• [U-Boot] [PATCH 3/4] ARM: mx6: Handle the MMDCx_MDCTL COL field caprices   Marek Vasut
• [U-Boot] [PATCH 4/4] ARM: mx6: Enable Thumb build for SPL   Marek Vasut
• [U-Boot] [PATCH 18/18] arm: mx6: cm_fx6: add sata support   Marek Vasut
• [U-Boot] [PATCH 18/18] arm: mx6: cm_fx6: add sata support   Marek Vasut
• [U-Boot] [PATCH 03/18] sf: fix sf probe   Marek Vasut
• [U-Boot] [PATCH 06/18] sata: dwc_ahsata: implement sata_port_status   Marek Vasut
• [U-Boot] [PATCH 03/18] sf: fix sf probe   Marek Vasut
• [U-Boot] [PATCH 03/18] sf: fix sf probe   Marek Vasut
• [U-Boot] [PATCH 03/18] sf: fix sf probe   Marek Vasut
• [U-Boot] [PATCH 12/18] arm: mx6: add support for Compulab cm-fx6 CoM   Marek Vasut
• [U-Boot] [PATCH 12/18] arm: mx6: add support for Compulab cm-fx6 CoM   Marek Vasut
• [U-Boot] [PATCH 01/18] spl: improve spi configuration   Marek Vasut
• [U-Boot] [PATCH 01/18] spl: improve spi configuration   Marek Vasut
• [U-Boot] [PATCH v3 2/4] usb/gadget: fastboot: add eMMC support for flash command   Marek Vasut
• [U-Boot] [PATCH v4 4/5] usb/gadget: fastboot: add sparse image definitions   Marek Vasut
• [U-Boot] [PATCH v4 0/5] Implement "fastboot flash" for eMMC   Marek Vasut
• [U-Boot] [PATCH v4 4/5] usb/gadget: fastboot: add sparse image definitions   Marek Vasut
• [U-Boot] [PATCH v4 4/5] usb/gadget: fastboot: add sparse image definitions   Marek Vasut
• [U-Boot] [PATCH v4 4/5] usb/gadget: fastboot: add sparse image definitions   Marek Vasut
• [U-Boot] [PATCH v3 2/4] usb/gadget: fastboot: add eMMC support for flash command   Marek Vasut
• [U-Boot] [PATCH v3 2/4] usb/gadget: fastboot: add eMMC support for flash command   Marek Vasut
• [U-Boot] [PATCH v4 4/5] usb/gadget: fastboot: add sparse image definitions   Marek Vasut
• [U-Boot] [PATCH V2 1/9] spl: replace CONFIG_SPL_SPI_* with CONFIG_SF_DEFAULT_*   Marek Vasut
• [U-Boot] [PATCH V2 3/9] spi: mxc: fix sf probe when using mxc_spi   Marek Vasut
• [U-Boot] [PATCH V2 5/9] compulab: eeprom: add support for defining eeprom i2c bus   Marek Vasut
• [U-Boot] [PATCH V2 6/9] sata: dwc_ahsata: implement sata_port_status   Marek Vasut
• [U-Boot] [PATCH v4 4/5] usb/gadget: fastboot: add sparse image definitions   Marek Vasut
• [U-Boot] [PULL] u-boot/master   Marek Vasut
• [U-Boot] [PATCH v3 2/4] usb/gadget: fastboot: add eMMC support for flash command   Marek Vasut
• [U-Boot] Python subprocess module missing in multiconfig.py   Marek Vasut
• [U-Boot] [PATCH v4 4/5] usb/gadget: fastboot: add sparse image definitions   Marek Vasut
• [U-Boot] [PATCH v4 4/5] usb/gadget: fastboot: add sparse image definitions   Marek Vasut
• [U-Boot] Python subprocess module missing in multiconfig.py   Marek Vasut
• [U-Boot] [PATCH] pci: mx6: fix occasional link failures   Marek Vasut
• [U-Boot] [PATCH] pci: mx6: fix occasional link failures   Marek Vasut
• [U-Boot] [PATCH 0/2] e1000: add i210 support   Marek Vasut
• [U-Boot] [PATCH] pci: mx6: fix occasional link failures   Marek Vasut
• [U-Boot] [PATCH v4 4/5] usb/gadget: fastboot: add sparse image definitions   Marek Vasut
• [U-Boot] Python subprocess module missing in multiconfig.py   Marek Vasut
• [U-Boot] [PATCH V2 1/9] spl: replace CONFIG_SPL_SPI_* with CONFIG_SF_DEFAULT_*   Marek Vasut
• [U-Boot] [GIT] Pull request: u-boot-dfu   Marek Vasut
• [U-Boot] [PATCH] pci: mx6: fix occasional link failures   Marek Vasut
• [U-Boot] [PATCH v4 4/5] usb/gadget: fastboot: add sparse image definitions   Marek Vasut
• [U-Boot] [PULL] u-boot/master   Marek Vasut
• [U-Boot] [PATCH V2 12/18] arm: mx6: add support for Compulab cm-fx6 CoM   Marek Vasut
• [U-Boot] pci command does not show Wifi card   Marek Vasut
• [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Marek Vasut
• [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Marek Vasut
• [U-Boot] [PATCH 1/3] arm: pxa: use common timer functions   Marek Vasut
• [U-Boot] [PATCH 2/3] arm: mx31: use common timer functions   Marek Vasut
• [U-Boot] [PULL] u-boot/master   Marek Vasut
• [U-Boot] [GIT][DFU] Pull request: u-boot-dfu   Marek Vasut
• [U-Boot] [PATCH v2 2/2] net: fec_mxc: Do not error out when FEC_TBD_READY   Marek Vasut
• [U-Boot] [PATCH v2 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Marek Vasut
• [U-Boot] [PATCH v2 2/2] net: fec_mxc: Do not error out when FEC_TBD_READY   Marek Vasut
• [U-Boot] [PATCH v2 2/2] net: fec_mxc: Do not error out when FEC_TBD_READY   Marek Vasut
• [U-Boot] [PATCH 0/2] e1000: add i210 support   Marek Vasut
• [U-Boot] [PATCH v2 2/2] net: fec_mxc: Do not error out when FEC_TBD_READY   Marek Vasut
• [U-Boot] [PATCH v3 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Marek Vasut
• [U-Boot] [PATCH v3 2/2] net: fec_mxc: Poll FEC_TBD_READY after polling TDAR   Marek Vasut
• [U-Boot] [PATCH v3 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Marek Vasut
• [U-Boot] [PATCH] mx6: Fix cacheline size   Marek Vasut
• [U-Boot] [PATCH v4] net: fec_mxc: Poll FEC_TBD_READY after polling TDAR   Marek Vasut
• [U-Boot] [PATCH v4] net: fec_mxc: Poll FEC_TBD_READY after polling TDAR   Marek Vasut
• [U-Boot] [PATCH v5 0/4] Implement "fastboot flash" for eMMC   Marek Vasut
• [U-Boot] [PATCH v5 0/4] Implement "fastboot flash" for eMMC   Marek Vasut
• [U-Boot] [PATCH v2 2/3] pcie_imx: Add mx6solox support   Marek Vasut
• [U-Boot] [PATCH v6 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Marek Vasut
• [U-Boot] [RFC PATCH] USB: get rid of warning when compile with debug enabled   Marek Vasut
• [U-Boot] [PATCH v2 2/3] pcie_imx: Add mx6solox support   Marek Vasut
• [U-Boot] [PATCH v3 2/3] pcie_imx: Add mx6solox support   Marek Vasut
• [U-Boot] [PATCH v3 3/3] mx6sxsabresd: Add PCI support   Marek Vasut
• [U-Boot] [PATCH v7 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Marek Vasut
• [U-Boot] [PATCH v7 2/2] net: fec_mxc: Poll FEC_TBD_READY after polling TDAR   Marek Vasut
• [U-Boot] [PATCH v3 3/3] mx6sxsabresd: Add PCI support   Marek Vasut
• [U-Boot] [PATCH v3 3/3] mx6sxsabresd: Add PCI support   Marek Vasut
• [U-Boot] [RFC PATCH] USB: get rid of warning when compile with debug enabled   Marek Vasut
• [U-Boot] [PATCH v5 1/4] usb/gadget: fastboot: add eMMC support for flash command   Marek Vasut
• [U-Boot] [U-Boot,1/2] e1000: Implement dcache support   Marek Vasut
• [U-Boot] [U-Boot,1/2] e1000: Implement dcache support   Marek Vasut
• [U-Boot] [PATCH] mpc5xxx: Add stub implementation of cache functions   Marek Vasut
• [U-Boot] [PATCH] mpc5xxx: Add stub implementation of cache functions   Marek Vasut
• [U-Boot] [RFC PATCH] USB: get rid of warning when compile with debug enabled   Marek Vasut
• [U-Boot] [PATCH] ARM: datacache always disabled when RAM extends to 0xFFFFFFFF   Marek Vasut
• [U-Boot] [RFC PATCH] USB: get rid of warning when compile with debug enabled   Marek Vasut
• [U-Boot] [RFC PATCH] USB: get rid of warning when compile with debug enabled   Marek Vasut
• [U-Boot] [PATCH v2 1/4] add code to handle Android sparse image format   Marek Vasut
• [U-Boot] [PATCH] usb: hub: don't check CONNECTION in hub_port_reset()   Marek Vasut
• [U-Boot] [PULL] u-boot/master   Marek Vasut
• [U-Boot] [PATCH] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] [PATCH 2/2] USB: gadget: s3c: get rid of debug compile warning   Marek Vasut
• [U-Boot] [PATCH] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] [PATCH] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] [PATCH v2 1/4] add code to handle Android sparse image format   Marek Vasut
• [U-Boot] [PATCH v3 3/3] mx6sxsabresd: Add PCI support   Marek Vasut
• [U-Boot] [PATCH v3 3/3] mx6sxsabresd: Add PCI support   Marek Vasut
• [U-Boot] [PATCH] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] [PATCH] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] [PATCH] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] [PATCH] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Marek Vasut
• [U-Boot] [PATCH] kbuild: force to define __UBOOT__ in all the C sources   Marek Vasut
• [U-Boot] [PATCH] video: add cfb console driver for sunxi   Luc Verhaegen
• [U-Boot] [PATCH] video: add cfb console driver for sunxi   Luc Verhaegen
• [U-Boot] [linux-sunxi] Re: [PATCH] video: add cfb console driver for sunxi   Luc Verhaegen
• [U-Boot] [PATCH] video: add cfb console driver for sunxi   Luc Verhaegen
• [U-Boot] [PATCH v2] ARM: DRA: Enable VTT regulator   Lokesh Vutla
• [U-Boot] [PATCH] ARM: DRA72: DDR3: Add emif settings for 666MHz clock   Lokesh Vutla
• [U-Boot] [PATCH v2 06/15] kirkwood: kconfig: refactor Kconfig and defconfig   Prafulla Wadaskar
• [U-Boot] [PATCH v2 06/15] kirkwood: kconfig: refactor Kconfig and defconfig   Prafulla Wadaskar
• [U-Boot] [PATCH v2 0/25] Add Marvell Armada XP MV78460 SoC support   Prafulla Wadaskar
• [U-Boot] [PATCH v3 0/18] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS/TWR board support   Alison Wang
• [U-Boot] [PATCH v3 01/18] arm: ls102xa: Add Freescale LS102xA SoC support   Alison Wang
• [U-Boot] [PATCH v3 02/18] ls102xa: i2c: Add i2c support for LS102xA   Alison Wang
• [U-Boot] [PATCH v3 03/18] net: Merge asm/fsl_enet.h into fsl_mdio.h   Alison Wang
• [U-Boot] [PATCH v3 04/18] net: mdio: Add private MDIO read/write function   Alison Wang
• [U-Boot] [PATCH v3 05/18] net: mdio: Use mb() to be compatible for both ARM and PowerPC   Alison Wang
• [U-Boot] [PATCH v3 06/18] ls102xa: etsec: Add etsec support for LS102xA   Alison Wang
• [U-Boot] [PATCH v3 07/18] ls102xa: esdhc: Add esdhc support for LS102xA   Alison Wang
• [U-Boot] [PATCH v3 08/18] driver/ddr/freescale: Add support of accumulate ECC   Alison Wang
• [U-Boot] [PATCH v3 09/18] driver/ddr/freescale: Fix DDR3 driver for ARM   Alison Wang
• [U-Boot] [PATCH v3 10/18] driver/ddr/fsl: Add support of overriding chip select write leveling   Alison Wang
• [U-Boot] [PATCH v3 11/18] arm: ls102xa: Add basic support for LS1021AQDS board   Alison Wang
• [U-Boot] [PATCH v3 12/18] arm: ls102xa: Add basic support for LS1021ATWR board   Alison Wang
• [U-Boot] [PATCH v3 13/18] net: tsec: Remove tx snooping support from LS1   Alison Wang
• [U-Boot] [PATCH v3 14/18] serial: lpuart: add 32-bit registers lpuart support   Alison Wang
• [U-Boot] [PATCH v3 15/18] arm: ls102xa: Add LETECH support for LS1021AQDS/TWR board   Alison Wang
• [U-Boot] [PATCH v3 16/18] video: dcu: Add Sii9022A HDMI Transmitter support   Alison Wang
• [U-Boot] [PATCH v3 17/18] video: dcu: Add DCU driver support   Alison Wang
• [U-Boot] [PATCH v3 18/18] ls102xa: dcu: Add platform support for DCU on LS1021ATWR board   Alison Wang
• [U-Boot] [PATCH v4 0/18] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS/TWR board support   Alison Wang
• [U-Boot] [PATCH v4 01/18] arm: ls102xa: Add Freescale LS102xA SoC support   Alison Wang
• [U-Boot] [PATCH v4 02/18] ls102xa: i2c: Add i2c support for LS102xA   Alison Wang
• [U-Boot] [PATCH v4 03/18] net: Merge asm/fsl_enet.h into fsl_mdio.h   Alison Wang
• [U-Boot] [PATCH v4 04/18] net: mdio: Add private MDIO read/write function   Alison Wang
• [U-Boot] [PATCH v4 05/18] net: mdio: Use mb() to be compatible for both ARM and PowerPC   Alison Wang
• [U-Boot] [PATCH v4 06/18] ls102xa: etsec: Add etsec support for LS102xA   Alison Wang
• [U-Boot] [PATCH v4 07/18] ls102xa: esdhc: Add esdhc support for LS102xA   Alison Wang
• [U-Boot] [PATCH v4 08/18] driver/ddr/freescale: Add support of accumulate ECC   Alison Wang
• [U-Boot] [PATCH v4 09/18] driver/ddr/freescale: Fix DDR3 driver for ARM   Alison Wang
• [U-Boot] [PATCH v4 10/18] driver/ddr/fsl: Add support of overriding chip select write leveling   Alison Wang
• [U-Boot] [PATCH v4 11/18] arm: ls102xa: Add basic support for LS1021AQDS board   Alison Wang
• [U-Boot] [PATCH v4 12/18] arm: ls102xa: Add basic support for LS1021ATWR board   Alison Wang
• [U-Boot] [PATCH v4 13/18] net: tsec: Remove tx snooping support from LS1   Alison Wang
• [U-Boot] [PATCH v4 14/18] serial: lpuart: add 32-bit registers lpuart support   Alison Wang
• [U-Boot] [PATCH v4 15/18] arm: ls102xa: Add LETECH support for LS1021AQDS/TWR board   Alison Wang
• [U-Boot] [PATCH v4 16/18] video: dcu: Add Sii9022A HDMI Transmitter support   Alison Wang
• [U-Boot] [PATCH v4 17/18] video: dcu: Add DCU driver support   Alison Wang
• [U-Boot] [PATCH v4 18/18] ls102xa: dcu: Add platform support for DCU on LS1021ATWR board   Alison Wang
• [U-Boot] [PATCH v5 0/16] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS/TWR board support   Alison Wang
• [U-Boot] [PATCH v5 01/16] arm: ls102xa: Add Freescale LS102xA SoC support   Alison Wang
• [U-Boot] [PATCH v5 02/16] ls102xa: i2c: Add i2c support for LS102xA   Alison Wang
• [U-Boot] [PATCH v5 03/16] net: Merge asm/fsl_enet.h into fsl_mdio.h   Alison Wang
• [U-Boot] [PATCH v5 04/16] net: mdio: Use mb() to be compatible for both ARM and PowerPC   Alison Wang
• [U-Boot] [PATCH v5 05/16] ls102xa: etsec: Add etsec support for LS102xA   Alison Wang
• [U-Boot] [PATCH v5 06/16] ls102xa: esdhc: Add esdhc support for LS102xA   Alison Wang
• [U-Boot] [PATCH v5 07/16] driver/ddr/freescale: Add support of accumulate ECC   Alison Wang
• [U-Boot] [PATCH v5 08/16] driver/ddr/freescale: Fix DDR3 driver for ARM   Alison Wang
• [U-Boot] [PATCH v5 09/16] driver/ddr/fsl: Add support of overriding chip select write leveling   Alison Wang
• [U-Boot] [PATCH v5 10/16] arm: ls102xa: Add basic support for LS1021AQDS board   Alison Wang
• [U-Boot] [PATCH v5 11/16] arm: ls102xa: Add basic support for LS1021ATWR board   Alison Wang
• [U-Boot] [PATCH v5 12/16] net: tsec: Remove tx snooping support from LS1   Alison Wang
• [U-Boot] [PATCH v5 13/16] serial: lpuart: add 32-bit registers lpuart support   Alison Wang
• [U-Boot] [PATCH v5 14/16] video: dcu: Add DCU driver support   Alison Wang
• [U-Boot] [PATCH v5 15/16] ls102xa: dcu: Add platform support for DCU on LS1021ATWR board   Alison Wang
• [U-Boot] [PATCH v5 16/16] video: dcu: Add Sii9022A HDMI Transmitter support   Alison Wang
• [U-Boot] [PATCH] ARM: tegra: add Colibri T30 board support   Stephen Warren
• [U-Boot] Driver Model and DTS Parsing   Stephen Warren
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Stephen Warren
• [U-Boot] [PATCH v3 14/16] tegra: dts: Add serial port details   Stephen Warren
• [U-Boot] [PATCH v3 07/16] sandbox: dts: Add a serial console node   Stephen Warren
• [U-Boot] [PATCH v2] ARM: tegra: Add support for norrin board   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: remove custom define for Jetson TK1   Stephen Warren
• [U-Boot] [PATCH] git-mailrc: add a kconfig alias   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: remove custom define for Jetson TK1   Stephen Warren
• [U-Boot] [PATCH 5/7] sunxi-common.h: Use new generic $bootcmd   Stephen Warren
• [U-Boot] [PATCH 7/7] sunxi: Add environment settings to make extlinux.conf booting work   Stephen Warren
• [U-Boot] [PATCH] pxe: automatically add console= to bootargs when not specified in append   Stephen Warren
• [U-Boot] [PATCH] pxe: Allow use of environment variables in append string   Stephen Warren
• [U-Boot] [PATCH 3/3] bootm: use genimg_get_kernel_addr()   Stephen Warren
• [U-Boot] [PATCH 7/7] sunxi: Add environment settings to make extlinux.conf booting work   Stephen Warren
• [U-Boot] [PATCH 7/7] sunxi: Add environment settings to make extlinux.conf booting work   Stephen Warren
• [U-Boot] [PATCH v3 14/16] tegra: dts: Add serial port details   Stephen Warren
• [U-Boot] [PATCH v3 07/16] sandbox: dts: Add a serial console node   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: remove custom define for Jetson TK1   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: add Colibri T30 board support   Stephen Warren
• [U-Boot] [PATCH 7/7] sunxi: Add environment settings to make extlinux.conf booting work   Stephen Warren
• [U-Boot] Driver Model and DTS Parsing   Stephen Warren
• [U-Boot] [PATCH v3 14/16] tegra: dts: Add serial port details   Stephen Warren
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Stephen Warren
• [U-Boot] [PATCH 03/15] tegra: kconfig: move board select menu and common settings   Stephen Warren
• [U-Boot] [PATCH v2] ARM: tegra: Add support for norrin board   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: add Colibri T30 board support   Stephen Warren
• [U-Boot] [PATCH v3] ARM: tegra: Add support for norrin board   Stephen Warren
• [U-Boot] [PATCH v3 14/16] tegra: dts: Add serial port details   Stephen Warren
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Stephen Warren
• [U-Boot] [GIT] Pull request: u-boot-dfu   Stephen Warren
• [U-Boot] [PATCH] pxe: clear Bootfile before returning   Stephen Warren
• [U-Boot] [PATCH] net: BOOTP retry timeout improvements   Stephen Warren
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Stephen Warren
• [U-Boot] [PATCH] lib: lmb: fix overflow in __lmb_alloc_base w/ large RAM   Stephen Warren
• [U-Boot] [PATCH v2] ARM: tegra: add Colibri T30 board support   Stephen Warren
• [U-Boot] [RFC PATCH v2 0/2] Make Python scripts compatible with older versions   Stephen Warren
• [U-Boot] [PATCH] usb: hub: don't check CONNECTION in hub_port_reset()   Stephen Warren
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Stephen Warren
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Stephen Warren
• [U-Boot] booting from sd card problem   Stephen Warren
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Stephen Warren
• [U-Boot] [RFC PATCH v2 0/2] Make Python scripts compatible with older versions   Stephen Warren
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Stephen Warren
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Stephen Warren
• [U-Boot] [PATCH] pci: fix overflow in __pci_hose_bus_to_phys w/ large RAM   Stephen Warren
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Stephen Warren
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Stephen Warren
• [U-Boot] thor integration with ci_udc   Stephen Warren
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Stephen Warren
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Stephen Warren
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Stephen Warren
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Stephen Warren
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Stephen Warren
• [U-Boot] [PATCH v7 5/5] RFC: Deprecate MAKEALL   Stephen Warren
• [U-Boot] [PATCH] net: BOOTP retry timeout improvements   Stephen Warren
• [U-Boot] [PATCH v7 5/5] RFC: Deprecate MAKEALL   Stephen Warren
• [U-Boot] [PATCH v2 3/3] test: ums: Add script for testing UMS gadget operation   Stephen Warren
• [U-Boot] [PATCH v4 14/15] tegra: dts: Add serial port details   Stephen Warren
• [U-Boot] [PATCH v4 14/15] tegra: dts: Add serial port details   Stephen Warren
• [U-Boot] [PATCH] image: fix bootm failure for FIT image   Stephen Warren
• [U-Boot] [PATCH 2/3] image: move all function comments to header file   Stephen Warren
• [U-Boot] [PATCH] net: BOOTP retry timeout improvements   Stephen Warren
• [U-Boot] [PATCH] net: More BOOTP retry timeout improvements   Stephen Warren
• [U-Boot] [PATCH v2] kconfig: convert Kconfig helper script into a shell script   Stephen Warren
• [U-Boot] [PATCH v3 3/3] test: ums: Add script for testing UMS gadget operation   Stephen Warren
• [U-Boot] [PATCH v2] kconfig: convert Kconfig helper script into a shell script   Stephen Warren
• [U-Boot] [PATCH] net: More BOOTP retry timeout improvements   Stephen Warren
• [U-Boot] [PATCH] arm: tegra: initial support for apalis t30   Stephen Warren
• [U-Boot] [PATCH 09/23] ARM: tegra: Implement tegra_plle_enable()   Stephen Warren
• [U-Boot] [PATCH 10/23] ARM: tegra: Provide PCIEXCLK reset ID   Stephen Warren
• [U-Boot] [PATCH 11/23] ARM: tegra: Implement powergate support   Stephen Warren
• [U-Boot] [PATCH 12/23] ARM: tegra: Implement XUSB pad controller   Stephen Warren
• [U-Boot] [PATCH 13/23] ARM: tegra: Add XUSB pad controller on Tegra124   Stephen Warren
• [U-Boot] [PATCH 14/23] ARM: tegra: Enable XUSB pad controller on Jetson TK1   Stephen Warren
• [U-Boot] [PATCH 16/23] ARM: tegra: Add Tegra20 PCIe device tree node   Stephen Warren
• [U-Boot] [PATCH 17/23] ARM: tegra: Enable PCIe on TrimSlice   Stephen Warren
• [U-Boot] [PATCH 18/23] ARM: tegra: Add Tegra30 PCIe device tree node   Stephen Warren
• [U-Boot] [PATCH 19/23] ARM: tegra: Enable PCIe on Beaver   Stephen Warren
• [U-Boot] [PATCH 21/23] ARM: tegra: Add GIC for Tegra124   Stephen Warren
• [U-Boot] [PATCH 22/23] ARM: tegra: Add Tegra124 PCIe device tree node   Stephen Warren
• [U-Boot] [PATCH 23/23] ARM: tegra: Enable PCIe on Jetson TK1   Stephen Warren
• [U-Boot] [PATCH 23/23] ARM: tegra: Enable PCIe on Jetson TK1   Stephen Warren
• [U-Boot] [PATCH 15/23] pci: tegra: Add Tegra PCIe driver   Stephen Warren
• [U-Boot] [PATCH 0/9] net: rtl8169: Fix cache maintenance issues   Stephen Warren
• [U-Boot] [PATCH 2/9] ARM: cache-cp15: Use unsigned long for address and size   Stephen Warren
• [U-Boot] [PATCH 4/9] ARM: Implement non-cached memory support   Stephen Warren
• [U-Boot] [PATCH 5/9] ARM: tegra: Enable non-cached memory   Stephen Warren
• [U-Boot] [PATCH 7/9] net: rtl8169: Properly align buffers   Stephen Warren
• [U-Boot] [PATCH 8/9] net: rtl8169: Use non-cached memory if available   Stephen Warren
• [U-Boot] [PATCH 15/23] pci: tegra: Add Tegra PCIe driver   Stephen Warren
• [U-Boot] [PATCH 1/2] dfu: Provide means to find difference between dfu-util -e and -R   Stephen Warren
• [U-Boot] [PATCH 2/2] udc: dfu: s3c_udc: Provide function to check if USB reset was asserted   Stephen Warren
• [U-Boot] [PATCH 23/23] ARM: tegra: Enable PCIe on Jetson TK1   Stephen Warren
• [U-Boot] [PATCH v2] arm: tegra: initial support for apalis t30   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tables   Stephen Warren
• [U-Boot] [PATCH v2] arm: tegra: initial support for apalis t30   Stephen Warren
• [U-Boot] [PATCH v6 03/12] tegra: Convert tegra GPIO driver to use driver model   Stephen Warren
• [U-Boot] [PATCH 1/2] dfu: Provide means to find difference between dfu-util -e and -R   Stephen Warren
• [U-Boot] [PATCH] usb: ci_udc: implement dfu_usb_get_reset   Stephen Warren
• [U-Boot] [PATCH v3] arm: tegra: initial support for apalis t30   Stephen Warren
• [U-Boot] [PATCH] arm: tegra: use architecture specific memcpy   Stephen Warren
• [U-Boot] [PATCH v2 01/40] vsprintf: Add modifier for phys_addr_t   Stephen Warren
• [U-Boot] [PATCH] README.kconfig: document backward compatibility "make *_config"   Stephen Warren
• [U-Boot] [PATCH v2 01/40] vsprintf: Add modifier for phys_addr_t   Stephen Warren
• [U-Boot] [PATCH v2] README.kconfig: document backward compatibility "make *_config"   Stephen Warren
• [U-Boot] [PATCH] ARM: mx6: Add support for Kosagi Novena   Stephen Warren
• [U-Boot] pull request for u-boot-tegra/master into ARM/master   Tom Warren
• [U-Boot] QorIQ P1020 NAND Flash 2k-Page-Size Problem   Scott Wood
• [U-Boot] QorIQ P1020 NAND Flash 2k-Page-Size Problem   Scott Wood
• [U-Boot] [PATCH 3/4] mtd: nand: add Freescale NFC driver   Scott Wood
• [U-Boot] [PATCH 3/4] mtd: nand: add Freescale NFC driver   Scott Wood
• [U-Boot] [PATCH 3/4] mtd: nand: add Freescale NFC driver   Scott Wood
• [U-Boot] [PATCH 3/4] mtd: nand: add Freescale NFC driver   Scott Wood
• [U-Boot] [PATCH 3/4] mtd: nand: add Freescale NFC driver   Scott Wood
• [U-Boot] [PATCH 1/9] mpc85xx: fix interrupt init to not affect watchdog   Scott Wood
• [U-Boot] [PATCH 2/9] powerpc: macros for e500mc timer regs added   Scott Wood
• [U-Boot] [PATCH 3/9] mpc85xx: watchdog initialisation added   Scott Wood
• [U-Boot] [PATCH 3/9] mpc85xx: watchdog initialisation added   Scott Wood
• [U-Boot] [PATCH 4/9] powerpc: mpc85xx watchdog init added to init_func   Scott Wood
• [U-Boot] [PATCH v2 3/4] mtd: nand: add Freescale NFC driver   Scott Wood
• [U-Boot] [PATCH 2/3] mtd, nand: move common functions from cmd_nand.c to common place   Scott Wood
• [U-Boot] [PATCH v2] powerpc/85xx: enable some P1/P2 boards mtdparts for nor flash   Scott Wood
• [U-Boot] [PATCH] mpc5xxx: Add stub implementation of cache functions   Scott Wood
• [U-Boot] [PATCH 0/3] introduce genimg_get_kernel_addr()   Bryan Wu
• [U-Boot] [PATCH 1/3] image: introduce genimg_get_kernel_addr()   Bryan Wu
• [U-Boot] [PATCH 2/3] pxe: detect image format before calling bootm/bootz   Bryan Wu
• [U-Boot] [PATCH 3/3] bootm: use genimg_get_kernel_addr()   Bryan Wu
• [U-Boot] [PATCH v2 0/3] introduce genimg_get_kernel_addr()   Bryan Wu
• [U-Boot] [PATCH v2 1/3] image: introduce genimg_get_kernel_addr()   Bryan Wu
• [U-Boot] [PATCH v2 2/3] pxe: detect image format before calling bootm/bootz   Bryan Wu
• [U-Boot] [PATCH v2 3/3] bootm: use genimg_get_kernel_addr()   Bryan Wu
• [U-Boot] [PATCH 3/3] bootm: use genimg_get_kernel_addr()   Bryan Wu
• [U-Boot] [U-Boot, 1/3] image: introduce genimg_get_kernel_addr()   Bryan Wu
• [U-Boot] [PATCH v2 3/3] bootm: use genimg_get_kernel_addr()   Bryan Wu
• [U-Boot] [PATCH v2 3/3] bootm: use genimg_get_kernel_addr()   Bryan Wu
• [U-Boot] [PATCH] image: fix bootm failure for FIT image   Bryan Wu
• [U-Boot] [PATCH] image: fix bootm failure for FIT image   Bryan Wu
• [U-Boot] [PATCH] image: fix bootm failure for FIT image   Bryan Wu
• [U-Boot] [PATCH] image: fix bootm failure for FIT image   Bryan Wu
• [U-Boot] [PATCH v2 1/3] image: fix bootm failure for FIT image   Bryan Wu
• [U-Boot] [PATCH 2/3] image: move all function comments to header file   Bryan Wu
• [U-Boot] [PATCH 3/3] bootm: make sure pass NULL when argc < 1   Bryan Wu
• [U-Boot] [PATCH 2/3] image: move all function comments to header file   Bryan Wu
• [U-Boot] [PATCH 2/3] image: move all function comments to header file   Bryan Wu
• [U-Boot] [PATCH 2/3] image: move all function comments to header file   Bryan Wu
• [U-Boot] [PATCH] image: fix bootm failure for FIT image   Bryan Wu
• [U-Boot] [PATCH v3 1/2] image: fix bootm failure for FIT image   Bryan Wu
• [U-Boot] [PATCH 2/2] bootm: make sure pass NULL when argc < 1   Bryan Wu
• [U-Boot] [PATCH v3 1/2] image: fix bootm failure for FIT image   Bryan Wu
• [U-Boot] [PATCH] powerpc/T4240QDS/eth: some fix for XFI   Shaohui Xie
• [U-Boot] [PATCH v3 04/18] net: mdio: Add private MDIO read/write function   Shaohui Xie
• [U-Boot] [PATCH] Makefile: remove generated boards.cfg within make mrproper   Masahiro YAMADA
• [U-Boot] [PATCH v3] tools: genboardscfg.py, no exception if columns undetectable   Masahiro YAMADA
• [U-Boot] [PATCH v2 0/15] arm: kconfig: move board select menus and other settings to SoC dir   Masahiro YAMADA
• [U-Boot] [PATCH v2] Makefile: remove generated boards.cfg within make distclean   Masahiro YAMADA
• [U-Boot] [RFC PATCH v2 0/2] Make Python scripts compatible with older versions   Masahiro YAMADA
• [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Masahiro YAMADA
• [U-Boot] [PATCH 3/4] arm: debug: import debug files from Linux 3.16   Masahiro YAMADA
• [U-Boot] [URGENT] Fatal Bug of Patman   Masahiro YAMADA
• [U-Boot] tarball for 2014.10-rc1   Masahiro YAMADA
• [U-Boot] [PATCH v10 06/14] patman: Avoid changing the order of tags   Masahiro YAMADA
• [U-Boot] [PATCH v2 1/3] stv0991 : Add basic stv0991 architecture support.   Masahiro YAMADA
• [U-Boot] [PATCH v2] sunxi: Correct typo CONFIG_FTDFILE => CONFIG_FDTFILE   Masahiro YAMADA
• [U-Boot] [PATCH 1/2] sandbox: Update minor documentation changes   Masahiro YAMADA
• [U-Boot] Please pull u-boot-sunxi.git/master   Masahiro Yamada
• [U-Boot] [PATCH] ARM: tegra: remove custom define for Jetson TK1   Masahiro Yamada
• [U-Boot] [PATCH] git-mailrc: add a kconfig alias   Masahiro Yamada
• [U-Boot] Quick guide to Kconfig   Masahiro Yamada
• [U-Boot] Quick guide to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH] drivers: net: remove dead drivers   Masahiro Yamada
• [U-Boot] [PATCH v2 2/3] buildman: Add some notes about moving from MAKEALL   Masahiro Yamada
• [U-Boot] [PATCH] cosmetic: mconf.c: remove texts referring to modules   Masahiro Yamada
• [U-Boot] Removing the need for boards.cfg   Masahiro Yamada
• [U-Boot] Removing the need for boards.cfg   Masahiro Yamada
• [U-Boot] [PATCH v2] drivers: rtc: remove dead drivers   Masahiro Yamada
• [U-Boot] [PATCH v2] drivers: net: remove dead drivers   Masahiro Yamada
• [U-Boot] [PATCH] MAINTAINERS: update the maintainer of Arndale board   Masahiro Yamada
• [U-Boot] [PATCH] MAINTAINERS: change the status of vexpress board to Orphan   Masahiro Yamada
• [U-Boot] [PATCH] Makefile: restore *_config target   Masahiro Yamada
• [U-Boot] [RFC PATCH 0/2] Make Python scripts compatible with older versions   Masahiro Yamada
• [U-Boot] [RFC PATCH 1/2] kconfig: make multiconfig.py compatible with Python 2.4   Masahiro Yamada
• [U-Boot] [RFC PATCH 2/2] tools: make genboardscfg.py compatible with Python2.5   Masahiro Yamada
• [U-Boot] Quick guide to Kconfig   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 0/2] Make Python scripts compatible with older versions   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 1/2] kconfig: make multiconfig.py compatible with Python 2.4   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 2/2] tools: make genboardscfg.py compatible with Python 2.5   Masahiro Yamada
• [U-Boot] [PATCH] ARM: tegra: remove custom define for Jetson TK1   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 0/2] Make Python scripts compatible with older versions   Masahiro Yamada
• [U-Boot] [PATCH] README.kconfig: add initial version of Kconfig document   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 0/2] Make Python scripts compatible with older versions   Masahiro Yamada
• [U-Boot] [PATCH 0/15] arm: kconfig: move board select menus and other settings to SoC dir   Masahiro Yamada
• [U-Boot] [PATCH 01/15] omap: remove omap5912osk board support   Masahiro Yamada
• [U-Boot] [PATCH 02/15] zynq: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH 03/15] tegra: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH 04/15] rmobile: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH 05/15] versatile: kconfig: move common settings   Masahiro Yamada
• [U-Boot] [PATCH 06/15] kirkwood: kconfig: refactor Kconfig and defconfig   Masahiro Yamada
• [U-Boot] [PATCH 07/15] exynos: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH 08/15] davinci: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH 09/15] omap3: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH 10/15] omap4: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH 11/15] omap5: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH 12/15] keystone: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH 13/15] orion5x: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH 14/15] highbank: kconfig: move common settings   Masahiro Yamada
• [U-Boot] [PATCH 15/15] nomadik: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 0/2] Make Python scripts compatible with older versions   Masahiro Yamada
• [U-Boot] Quick guide to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH] drivers: rtc: remove dead drivers   Masahiro Yamada
• [U-Boot] Removing the need for boards.cfg   Masahiro Yamada
• [U-Boot] [PATCH] Makefile: restore *_config target   Masahiro Yamada
• [U-Boot] [PATCH 03/15] tegra: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH] doc: README.SPL: adjust for Kbuild and Kconfig   Masahiro Yamada
• [U-Boot] [PATCH] doc: delete README.ARM-SoC   Masahiro Yamada
• [U-Boot] [PATCH 0/3] Kbuild: sync with Linux 3.16   Masahiro Yamada
• [U-Boot] [PATCH 1/3] kbuild: move extra gcc checks to scripts/Makefile.extrawarn   Masahiro Yamada
• [U-Boot] [PATCH 2/3] kbuild: sync mixed targets handling with Linux 3.16   Masahiro Yamada
• [U-Boot] [PATCH 3/3] scripts: objdiff: sync with Linux 3.16   Masahiro Yamada
• [U-Boot] [PATCH v8] nand/denali: Adding Denali NAND driver support   Masahiro Yamada
• [U-Boot] [PATCH 06/15] kirkwood: kconfig: refactor Kconfig and defconfig   Masahiro Yamada
• [U-Boot] [PATCH 0/15] arm: kconfig: move board select menus and other settings to SoC dir   Masahiro Yamada
• [U-Boot] [PATCH] Makefile: restore *_config target   Masahiro Yamada
• [U-Boot] [PATCH v2 0/15] arm: kconfig: move board select menus and other settings to SoC dir   Masahiro Yamada
• [U-Boot] [PATCH v2 01/15] omap: remove omap5912osk board support   Masahiro Yamada
• [U-Boot] [PATCH v2 02/15] zynq: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH v2 03/15] tegra: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH v2 04/15] rmobile: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH v2 05/15] versatile: kconfig: move common settings   Masahiro Yamada
• [U-Boot] [PATCH v2 06/15] kirkwood: kconfig: refactor Kconfig and defconfig   Masahiro Yamada
• [U-Boot] [PATCH v2 07/15] exynos: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH v2 08/15] davinci: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH v2 09/15] omap3: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH v2 10/15] omap4: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH v2 11/15] omap5: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH v2 12/15] keystone: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH v2 13/15] orion5x: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH v2 14/15] highbank: kconfig: move common settings   Masahiro Yamada
• [U-Boot] [PATCH v2 15/15] nomadik: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH 0/5] mpc8xx: remove some orphan boards   Masahiro Yamada
• [U-Boot] [PATCH 1/5] powerpc: mpc8xx: remove stxxtc board support   Masahiro Yamada
• [U-Boot] [PATCH 2/5] powerpc: mpc8xx: remove svm_sc8xx board   Masahiro Yamada
• [U-Boot] [PATCH 3/5] powerpc: mpc8xx: remove SXNI855T board support   Masahiro Yamada
• [U-Boot] [PATCH 4/5] powerpc: mpc8xx: remove GEN860T, GEN806T_SC board support   Masahiro Yamada
• [U-Boot] [PATCH 5/5] powerpc: mpc8xx: remove FLAGADM board support   Masahiro Yamada
• [U-Boot] [PATCH] davinci: orphan some Davinci boards   Masahiro Yamada
• [U-Boot] [PATCH] tools/genboardscfg.py: Do not output SPLCPU field   Masahiro Yamada
• [U-Boot] [PATCH v2 02/15] zynq: kconfig: move board select menu and commonsettings   Masahiro Yamada
• [U-Boot] [PATCH v2 02/15] zynq: kconfig: move board select menu and commonsettings   Masahiro Yamada
• [U-Boot] [PATCH v2 02/15] zynq: kconfig: move board select menu and commonsettings   Masahiro Yamada
• [U-Boot] [PATCH] tools, scripts: refactor error-out statements of Python scripts   Masahiro Yamada
• [U-Boot] [PATCH v8 02/13] kconfig: add board Kconfig and defconfig files   Masahiro Yamada
• [U-Boot] [PATCH] tools, scripts: refactor error-out statements of Python scripts   Masahiro Yamada
• [U-Boot] [PATCH] Makefile: remove generated boards.cfg within make mrproper   Masahiro Yamada
• [U-Boot] [PATCH] tools: genboardscfg.py, use default terminal size if undetectable   Masahiro Yamada
• [U-Boot] [PATCH] tools: genboardscfg.py, use default terminal size if undetectable   Masahiro Yamada
• [U-Boot] [PATCH v4 02/13] buildman: Add some notes about moving from MAKEALL   Masahiro Yamada
• [U-Boot] [PATCH v2] README.kconfig: add initial version of Kconfig document   Masahiro Yamada
• [U-Boot] [PATCH v2] tools, scripts: refactor error-out statements of Python scripts   Masahiro Yamada
• [U-Boot] [PATCH] scripts/Lindent: import from Linux 3.16   Masahiro Yamada
• [U-Boot] [PATCH] kconfig: remove DEFCONFIG_LIST   Masahiro Yamada
• [U-Boot] [PATCH] kconfig: convert Kconfig helper script into a shell script   Masahiro Yamada
• [U-Boot] [PATCH v2] kconfig: convert Kconfig helper script into a shell script   Masahiro Yamada
• [U-Boot] [PATCH 0/4] Introduce low-level debug for ARM architecture   Masahiro Yamada
• [U-Boot] [PATCH 1/4] vexpress64: kconfig: consolidate CONFIG_TARGET_VEXPRESS_AEMV8A_SEMI   Masahiro Yamada
• [U-Boot] [PATCH 2/4] kconfig: armv8: move CONFIG_ARM64 to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 3/4] arm: debug: import debug files from Linux 3.16   Masahiro Yamada
• [U-Boot] [PATCH 4/4] arm: debug: add Kconfig entries for lowlevel debug   Masahiro Yamada
• [U-Boot] [PATCH v2 02/15] zynq: kconfig: move board select menu and commonsettings   Masahiro Yamada
• [U-Boot] [PATCH 1/2] ARM: zynq: Move ps7_init() out of spl.h   Masahiro Yamada
• [U-Boot] [PATCH 2/2] ARM: zynq: Remove spl.h   Masahiro Yamada
• [U-Boot] [PATCH v8] nand/denali: Adding Denali NAND driver support   Masahiro Yamada
• [U-Boot] [PATCH v2] Makefile: remove generated boards.cfg within make distclean   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 0/2] Make Python scripts compatible with older versions   Masahiro Yamada
• [U-Boot] [PATCH v2] kconfig: convert Kconfig helper script into a shell script   Masahiro Yamada
• [U-Boot] [PATCH v2] kconfig: convert Kconfig helper script into a shell script   Masahiro Yamada
• [U-Boot] [PATCH 0/4] Introduce low-level debug for ARM architecture   Masahiro Yamada
• [U-Boot] [PATCH v3] Makefile: remove generated boards.cfg within make distclean   Masahiro Yamada
• [U-Boot] [U-Boot, v8] nand/denali: Adding Denali NAND driver support   Masahiro Yamada
• [U-Boot] [PATCH] arm: debug: replace license blocks with SPDX   Masahiro Yamada
• [U-Boot] [PATCH] nand/denali: Adding Denali NAND driver support   Masahiro Yamada
• [U-Boot] [PATCH 0/7] tools/genboardscfg.py: various fixes and performance improvement   Masahiro Yamada
• [U-Boot] [PATCH 1/7] tools/genboardscfg.py: ignore defconfigs starting with a dot   Masahiro Yamada
• [U-Boot] [PATCH 2/7] tools/genboardscfg.py: be tolerant of missing MAINTAINERS   Masahiro Yamada
• [U-Boot] [PATCH 3/7] tools/genboardscfg.py: be tolerant of insane Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 4/7] tools/genboardscfg.py: wait for unfinished subprocesses before error-out   Masahiro Yamada
• [U-Boot] [PATCH 5/7] tools/genboardscfg.py: fix minor problems on termination   Masahiro Yamada
• [U-Boot] [PATCH 6/7] tools/genboardscfg.py: check if the boards.cfg is up to date   Masahiro Yamada
• [U-Boot] [PATCH 7/7] tools/genboardscfg.py: improve performance   Masahiro Yamada
• [U-Boot] Patman bug report: Commit-notes not working   Masahiro Yamada
• [U-Boot] [PATCH v3] kconfig: convert Kconfig helper script into a shell script   Masahiro Yamada
• [U-Boot] [PATCH] kconfig: convert Kconfig helper script into a shell script   Masahiro Yamada
• [U-Boot] [PATCH 5/7] tools/genboardscfg.py: fix minor problems on termination   Masahiro Yamada
• [U-Boot] [PATCH 6/7] tools/genboardscfg.py: check if the boards.cfg is up to date   Masahiro Yamada
• [U-Boot] A minor issue of Patman   Masahiro Yamada
• [U-Boot] [PATCH] patman: refactor help message   Masahiro Yamada
• [U-Boot] [PATCH] buildman: refactor help message   Masahiro Yamada
• [U-Boot] [PATCH] git-mailrc: add patman and buildman alias   Masahiro Yamada
• [U-Boot] [PATCH 3/6] arm: uniphier: add UniPhier SoC suppurt code   Masahiro Yamada
• [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Masahiro Yamada
• [U-Boot] [PATCH v2 7/7] tools/genboardscfg.py: improve performance   Masahiro Yamada
• [U-Boot] [PATCH] tools/genboardscfg.py: fix a bug of MAINTAINERS handling   Masahiro Yamada
• [U-Boot] [PATCH 0/2] MAKEALL, buildman: run genboardscfg.py to make sure boards.cfg is new   Masahiro Yamada
• [U-Boot] [PATCH 1/2] MAKEALL: run genboardscfg.py all the time   Masahiro Yamada
• [U-Boot] [PATCH 2/2] buildman: run genboardscfg.py all the time   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 2/2] tools: make genboardscfg.py compatible with Python 2.5   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 2/2] tools: make genboardscfg.py compatible with Python 2.5   Masahiro Yamada
• [U-Boot] [PATCH v4] Makefile: remove generated boards.cfg within make distclean   Masahiro Yamada
• [U-Boot] [PATCH v2 07/15] exynos: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH v2 0/6] Add support for Panasonic UniPhier SoCs/boards   Masahiro Yamada
• [U-Boot] [PATCH v2 1/6] nand: denali: add Denali NAND driver for SPL   Masahiro Yamada
• [U-Boot] [PATCH v2 2/6] serial: add UniPhier serial driver   Masahiro Yamada
• [U-Boot] [PATCH v2 3/6] arm: uniphier: add UniPhier SoC support code   Masahiro Yamada
• [U-Boot] [PATCH v2 4/6] arm: uniphier: add Kconfig and defconfig   Masahiro Yamada
• [U-Boot] [PATCH v2 5/6] MAINTAINERS: add me as the maintainer of UniPhier Platform   Masahiro Yamada
• [U-Boot] [PATCH v2 6/6] git-mailrc: add me as the maintainer of UniPhier Platform   Masahiro Yamada
• [U-Boot] [URGENT] Fatal Bug of Patman   Masahiro Yamada
• [U-Boot] [PATCH v2] buildman: refactor help message   Masahiro Yamada
• [U-Boot] [PATCH] buildman: refactor help message (This has been superseded !)   Masahiro Yamada
• [U-Boot] [PATCH 0/3] Kconfig: import some options related to general setup   Masahiro Yamada
• [U-Boot] [PATCH 1/3] kconfig: add CONFIG_LOCALVERSION and CONFIG_LOCALVERSION_AUTO   Masahiro Yamada
• [U-Boot] [PATCH 2/3] scripts: refetch scripts/setlocalversion from Linux 3.16   Masahiro Yamada
• [U-Boot] [PATCH 3/3] kconfig: add CONFIG_CC_OPTIMIZE_FOR_SIZE   Masahiro Yamada
• [U-Boot] [PATCH] cosmetic: README.scrapyard: add NIOS2 boards   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 2/2] tools: make genboardscfg.py compatible with Python 2.5   Masahiro Yamada
• [U-Boot] [PATCH v3 0/7] tools/genboardscfg.py: various fixes and performance improvement   Masahiro Yamada
• [U-Boot] [PATCH v3 1/7] tools/genboardscfg.py: ignore defconfigs starting with a dot   Masahiro Yamada
• [U-Boot] [PATCH v3 2/7] tools/genboardscfg.py: be tolerant of missing MAINTAINERS   Masahiro Yamada
• [U-Boot] [PATCH v3 3/7] tools/genboardscfg.py: be tolerant of insane Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v3 4/7] tools/genboardscfg.py: wait for unfinished subprocesses before error-out   Masahiro Yamada
• [U-Boot] [PATCH v3 5/7] tools/genboardscfg.py: fix minor problems on termination   Masahiro Yamada
• [U-Boot] [PATCH v3 6/7] tools/genboardscfg.py: check if the boards.cfg is up to date   Masahiro Yamada
• [U-Boot] [PATCH v3 7/7] tools/genboardscfg.py: improve performance   Masahiro Yamada
• [U-Boot] [PATCH 5/7] tools/genboardscfg.py: fix minor problems on termination   Masahiro Yamada
• [U-Boot] [PATCH 3/4] arm: debug: import debug files from Linux 3.16   Masahiro Yamada
• [U-Boot] [PATCH] tools/genboardscfg.py: change shebang into /usr/bin/env python2   Masahiro Yamada
• [U-Boot] [PATCH] README.kconfig: document backward compatibility "make *_config"   Masahiro Yamada
• [U-Boot] [PATCH] tools/env: change stripping strategy to allow no-stripping   Masahiro Yamada
• [U-Boot] [PATCH v2] README.kconfig: document backward compatibility "make *_config"   Masahiro Yamada
• [U-Boot] [PATCH] README.kconfig: document backward compatibility "make *_config"   Masahiro Yamada
• [U-Boot] [PATCH] nand/denali: Adding Denali NAND driver support   Masahiro Yamada
• [U-Boot] [PATCH v2 0/6] Introduce low-level debug for ARM architecture   Masahiro Yamada
• [U-Boot] [PATCH v2 1/6] vexpress64: kconfig: consolidate CONFIG_TARGET_VEXPRESS_AEMV8A_SEMI   Masahiro Yamada
• [U-Boot] [PATCH v2 2/6] kconfig: armv8: move CONFIG_ARM64 to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v2 3/6] arm: debug: import debug files from Linux 3.16   Masahiro Yamada
• [U-Boot] [PATCH v2 4/6] arm: debug: replace license blocks with SPDX   Masahiro Yamada
• [U-Boot] [PATCH v2 5/6] arm: debug: add Kconfig entries for lowlevel debug   Masahiro Yamada
• [U-Boot] [PATCH v2 6/6] arm: debug: adjust for U-Boot   Masahiro Yamada
• [U-Boot] [PATCH v2 07/15] exynos: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [NAND Question] How should NAND_CMD_LOCK_TIGHT be handled ?   Masahiro Yamada
• [U-Boot] [PATCH v3 0/14] arm: kconfig: move board select menus and other settings to SoC dir   Masahiro Yamada
• [U-Boot] [PATCH v3 01/14] zynq: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH v3 02/14] tegra: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH v3 03/14] rmobile: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH v3 04/14] versatile: kconfig: move common settings   Masahiro Yamada
• [U-Boot] [PATCH v3 05/14] kirkwood: kconfig: refactor Kconfig and defconfig   Masahiro Yamada
• [U-Boot] [PATCH v3 06/14] exynos: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH v3 07/14] davinci: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH v3 08/14] omap3: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH v3 09/14] omap4: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH v3 10/14] omap5: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH v3 11/14] keystone: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH v3 12/14] orion5x: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH v3 13/14] highbank: kconfig: move common settings   Masahiro Yamada
• [U-Boot] [PATCH v3 14/14] nomadik: kconfig: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH] kbuild: force to define __UBOOT__ in all the C sources   Masahiro Yamada
• [U-Boot] [PATCH] kbuild: force to define __UBOOT__ in all the C sources   Masahiro Yamada
• [U-Boot] [PATCH] kconfig: remove redundant "SPL" from CONFIG_SYS_EXTRA_OPTIONS   Masahiro Yamada
• [U-Boot] [PATCH] mx6: tqma6: get board support back to Kconfig build system   Masahiro Yamada
• [U-Boot] [PATCH] arm: am335x: add Kconfig range attribute to prevent invalid CONS_INDEX   Masahiro Yamada
• [U-Boot] [PATCH] tools/genboardscfg.py: improve performance more by using Kconfiglib   Masahiro Yamada
• [U-Boot] Quick guide to Kconfig   Yan, Miao
• [U-Boot] Quick guide to Kconfig   Yan, Miao
• [U-Boot] [RFC PATCH v2 0/2] Make Python scripts compatible with older versions   Yan, Miao
• [U-Boot] [PATCH v2 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Li Ye-B37916
• [U-Boot] [PATCH] imximage: Fix imximage IVT bug for EIM-NOR boot   Li Ye-B37916
• [U-Boot] [PATCH v2 2/2] net: fec_mxc: Do not error out when FEC_TBD_READY   Li Ye-B37916
• [U-Boot] [PATCH v4] net: fec_mxc: Poll FEC_TBD_READY after polling TDAR   Li Ye-B37916
• [U-Boot] [PATCH] imximage: Fix imximage IVT bug for EIM-NOR boot   Ye.Li
• [U-Boot] [PATCH] iMX6: Disable the L2 before chaning the PL310 latency   Ye.Li
• [U-Boot] Proper way to implement PCI Host driver   Yehuda Yitchak
• [U-Boot] [PATCH v3 1/2] blackfin: convert blackfin board_f and board_r to use generic board init functions   Sonic Zhang
• [U-Boot] [PATCH v3 2/2] support blackfin board initialization in generic board_f   Sonic Zhang
• [U-Boot] Pull request: u-boot-blackfin   Sonic Zhang
• [U-Boot] [PATCH] mmc: set correct block size value in bfin sdh driver   Sonic Zhang
• [U-Boot] [PATCH v4 1/2] blackfin: convert blackfin board_f and board_r to use generic board init functions   Sonic Zhang
• [U-Boot] [PATCH v4 2/2] support blackfin board initialization in generic board_f   Sonic Zhang
• [U-Boot] Pull request: u-boot-blackfin   Sonic Zhang
• [U-Boot] Pull request v2: u-boot-blackfin   Sonic Zhang
• [U-Boot] [PATCH] mmc: set correct block size value in bfin sdh driver   Sonic Zhang
• [U-Boot] [PATCH] bfin: make the CPU macro of LDR target more genenric   Sonic Zhang
• [U-Boot] Build broken for bf538f-ezkit board - not enough ram   Sonic Zhang
• [U-Boot] [PATCH] bfin: the max bfin sdh block count is 127   Sonic Zhang
• [U-Boot] [PATCH] tools/env: change stripping strategy to allow no-stripping   Sonic Zhang
• [U-Boot] [PATCH] sf: Add support for flag status register on Micron chips   Hou Zhiqiang
• [U-Boot] [PATCH] arm: tegra: initial support for apalis t30   Marcel Ziswiler
• [U-Boot] [PATCH 19/23] ARM: tegra: Enable PCIe on Beaver   Marcel Ziswiler
• [U-Boot] [PATCH] arm: tegra: initial support for apalis t30   Marcel Ziswiler
• [U-Boot] [PATCH 19/23] ARM: tegra: Enable PCIe on Beaver   Marcel Ziswiler
• [U-Boot] [PATCH 19/23] ARM: tegra: Enable PCIe on Beaver   Marcel Ziswiler
• [U-Boot] [PATCH v2] arm: tegra: initial support for apalis t30   Marcel Ziswiler
• [U-Boot] [PATCH v2] arm: tegra: initial support for apalis t30   Marcel Ziswiler
• [U-Boot] [PATCH v2] arm: tegra: initial support for apalis t30   Marcel Ziswiler
• [U-Boot] [PATCH] arm: tegra: use architecture specific memcpy   Marcel Ziswiler
• [U-Boot] [PATCH v3] arm: tegra: initial support for apalis t30   Marcel Ziswiler
• [U-Boot] [PATCH v3] arm: tegra: initial support for apalis t30   Marcel Ziswiler
• [U-Boot] [PATCH] arm: tegra: use architecture specific memcpy   Marcel Ziswiler
• [U-Boot] [PATCH] ARM: HYP/non-sec: Add MIDR check to detect unsupported CPUs   Marc Zyngier
• [U-Boot] [PATCH] ARM: HYP/non-sec: Add MIDR check to detect unsupported CPUs   Marc Zyngier
• [U-Boot] [PATCH] ARM: non-sec: Add spin table reserved memory support   Marc Zyngier
• [U-Boot] hw_watchdog   andrew at PolkaSpots.com
• [U-Boot] booting from sd card problem   shobin b
• [U-Boot] Pull request: u-boot-mmc 1/08/2014   drEagle
• [U-Boot] [PATCH 0/3] Initial cleanup of arm port timer subsystem   andrew.ruder at elecsyscorp.com
• [U-Boot] [PATCH 1/3] arm: pxa: use common timer functions   andrew.ruder at elecsyscorp.com
• [U-Boot] [PATCH 2/3] arm: mx31: use common timer functions   andrew.ruder at elecsyscorp.com
• [U-Boot] [PATCH 3/3] arm: mx35: use common timer functions   andrew.ruder at elecsyscorp.com
• [U-Boot] [PATCH] powerpc/t1040qds: Remove Video - HDMI support   Dongsheng.Wang at freescale.com
• [U-Boot] [PATCH] powerpc/t1040qds: Remove Video - HDMI support   Dongsheng.Wang at freescale.com
• [U-Boot] [PATCH] ARM: non-sec: Add spin table reserved memory support   Li.Xiubo at freescale.com
• [U-Boot] [Patch v2 3/5] armv8/fsl-lsch3: Release secondary cores from boot hold off with Boot Page   bhupesh.sharma at freescale.com
• [U-Boot] [PATCH] Add i.MX6 CPU temperature sensor support   nitin.garg at freescale.com
• [U-Boot] [PATCH] Add i.MX6 CPU temperature sensor support   nitin.garg at freescale.com
• [U-Boot] [PATCH] Add i.MX6 CPU temperature sensor support   nitin.garg at freescale.com
• [U-Boot] [PATCH] Add i.MX6 CPU temperature sensor support   nitin.garg at freescale.com
• [U-Boot] [PATCH] Remove board/freescale/imx/ddr folder   nitin.garg at freescale.com
• [U-Boot] [PATCH] Move board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg to board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg so that mx6sabresd files are consolidated into one place.   nitin.garg at freescale.com
• [U-Boot] [PATCH] i.MX6 High Assurance Boot (HAB) support   nitin.garg at freescale.com
• [U-Boot] [PATCH] Support i.MX6 High Assurance Boot (HAB) authentication of images   nitin.garg at freescale.com
• [U-Boot] [PATCH] i.MX6SL EVK: Add keypad support   nitin.garg at freescale.com
• [U-Boot] [PATCH] Add support for i.MX6SL EVK board keypad   nitin.garg at freescale.com
• [U-Boot] [PATCH] powerpc/mpc85xx: Enabling CPC conditionally based on hwconfig options   shaveta at freescale.com
• [U-Boot] [PATCH v2] powerpc/85xx: enable some P1/P2 boards mtdparts for nor flash   yangbo.lu at freescale.com
• [U-Boot] [linux-sunxi] [PATCH 0/2] sunxi: Single u-boot binary for Allwinner A10/A13/A20 devices   jonsmirl at gmail.com
• [U-Boot] [PATCH] powerpc/T4240QDS/eth: some fix for XFI   shh.xie at gmail.com
• [U-Boot] [PATCH][v2] powerpc/T4240QDS/eth: some fix for XFI   shh.xie at gmail.com
• [U-Boot] [PATCH] Fman/mEMAC: mEMAC fix for 10G MAC and PHY   shh.xie at gmail.com
• [U-Boot] [PATCH] driver/net/fm/memac_phy: set NEG bit for external MDIOs   shh.xie at gmail.com
• [U-Boot] [PATCH V4 0/9] peach_pit: Add support for FIMD, DP and parade chip   Ajay kumar
• [U-Boot] [PATCH] mx6: Fix ECSPI typo in soc_boot_modes   picmaster at mail.bg
• [U-Boot] Python subprocess module missing in multiconfig.py   david at plentovichdesign.com
• [U-Boot] [PATCH v5 1/2] m68k: add support for Freescale Coldfire mcf5307 cpu   angelo at sysam.it
• [U-Boot] [PATCH v7 2/2] Add support for Sysam AMCORE board   angelo at sysam.it
• [U-Boot] running test application uboot hello_world.bin   utkarsh
• [U-Boot] [U-boot] Question about the (new) U-Boot Timer API   TigerLiu at via-alliance.com
• [U-Boot] [PATCH 1/3] stv0991 : Add basic stv0991 architecture support.   vikasm
• [U-Boot] Something wrong about usb driver in u-boot.   吴滨斌