December 2014 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Dec 1 06:24:16 CET 2014
Ending: Wed Dec 31 20:15:00 CET 2014
Messages: 2654

• [U-Boot] [PATCH 2/2 v2] exynos5420: fix compilation without parade video   Minkyu Kang
  • [U-Boot] [PATCH 2/2 v2] exynos5420: fix compilation without parade video   Sjoerd Simons
    • [U-Boot] [PATCH 2/2 v2] exynos5420: fix compilation without parade video   Simon Glass
• [U-Boot] [PATCH 1/7] arm: rmobile: Move module control register to header file of SoC   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 2/7] arm: rmobile: Move control macro of mstp to arch-rmobile/rcar-mstp.h   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 3/7] arm: rmobile: Add mstp_setclrbits and mstp_setclrbits_le32   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 4/7] arm: rmobile: lager: Halt clock prior to booting kernel   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 4/7] arm: rmobile: lager: Halt clock prior to booting kernel   Wolfgang Denk
      • [U-Boot] [PATCH 4/7] arm: rmobile: lager: Halt clock prior to booting kernel   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 5/7] arm: rmobile: koelsch: Halt clock prior to booting kernel   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 6/7] arm: rmobile: alt: Halt clock prior to booting kernel   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 7/7] arm: rmobile: gose: Halt clock prior to booting kernel   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v3] Export redesign   Martin Dorwig
  • [U-Boot] [PATCH v3] Export redesign   Simon Glass
    • [U-Boot] [PATCH v3] Export redesign   Simon Glass
• [U-Boot] [PATCH 1/6] kirkwood: ib62x0: add CONFIG_SYS_GENERIC_BOARD define   Stefan Roese
• [U-Boot] [PATCH 2/6] kirkwood: dockstar: add CONFIG_SYS_GENERIC_BOARD define   Stefan Roese
• [U-Boot] [PATCH 3/6] kirkwood: goflexhome: add CONFIG_SYS_GENERIC_BOARD define   Stefan Roese
• [U-Boot] [PATCH 4/6] kirkwood: iconnect: add CONFIG_SYS_GENERIC_BOARD define   Stefan Roese
• [U-Boot] [PATCH 5/6] kirkwood: pogo_e02: add CONFIG_SYS_GENERIC_BOARD define   Stefan Roese
• [U-Boot] [PATCH 6/6] kirkwood: sheevaplug: add CONFIG_SYS_GENERIC_BOARD define   Stefan Roese
• [U-Boot] [PATCH] powerpc/p2041rdb: enable generic board configs   shh.xie at gmail.com
  • [U-Boot] [PATCH] powerpc/p2041rdb: enable generic board configs   York Sun
• [U-Boot] [PATCH] powerpc/t4240rdb: Convert to use generic board code   Chunhe Lan
  • [U-Boot] [PATCH] powerpc/t4240rdb: Convert to use generic board code   York Sun
• [U-Boot] [PATCH 1/6] kirkwood: ib62x0: add CONFIG_SYS_GENERIC_BOARD define   Prafulla Wadaskar
  • [U-Boot] [PATCH 1/6] kirkwood: ib62x0: add CONFIG_SYS_GENERIC_BOARD define   Luka Perkov
• [U-Boot] [PATCH v3 01/10] dm: i2c: Add a uclass for I2C   Masahiro Yamada
• [U-Boot] [ANN] U-Boot v2015.01-rc2 released   Pierre Aubert
• [U-Boot] [PATCH] imx: mx53loco: Add raw initrd support   Stefano Babic
• [U-Boot] [PATCH 1/3] mxs_ocotp: prevent error path from returning success   Stefano Babic
• [U-Boot] [PATCH 2/3] mxs_ocotp: check for errors from the OTP controller after writing   Stefano Babic
• [U-Boot] [PATCH 3/3] mxs_ocotp: clear the error flag before initiating write operation   Stefano Babic
• [U-Boot] [PATCH] thermal: imx_thermal: Do not display calibration data   Stefano Babic
• [U-Boot] [PATCH 2/2] mx6sxsabresd: Add thermal support   Stefano Babic
• [U-Boot] [PATCH 1/2] mxc_ocotp: Do not disable the OCOTP clock after every access   Stefano Babic
• [U-Boot] [PATCH] tbs2910: fix Kconfig   Stefano Babic
• [U-Boot] [PATCH] tbs2910: fix lost characters on serial input   Stefano Babic
• [U-Boot] [PATCH v2] sata: fix reset_sata for dwc_ahsata   Stefano Babic
• [U-Boot] [PATCH v2] arm: mx6: Change defines ENET_xxMHz to ENET_xxMHZ (no CamelCase)   Stefano Babic
• [U-Boot] [PATCH 1/2] config_fallbacks: Add a default entry for CONFIG_SYS_PBSIZE   Stefano Babic
• [U-Boot] [PATCH 2/2] mx6sabre_common: Use the default CONFIG_SYS_PBSIZE   Stefano Babic
• [U-Boot] [PATCH] arm: vf610: improve evaluation of reset source   Stefano Babic
• [U-Boot] [PATCH 1/2 v2] Exynos5800: The Peach-Pi board does not have a Parade video bridge   Sjoerd Simons
  • [U-Boot] [PATCH 1/2 v2] Exynos5800: The Peach-Pi board does not have a Parade video bridge   Simon Glass
    • [U-Boot] [PATCH 1/2 v2] Exynos5800: The Peach-Pi board does not have a Parade video bridge   Sjoerd Simons
      • [U-Boot] [PATCH 1/2 v2] Exynos5800: The Peach-Pi board does not have a Parade video bridge   Simon Glass
      • [U-Boot] [PATCH 1/2 v2] Exynos5800: The Peach-Pi board does not have a Parade video bridge   Ajay kumar
• [U-Boot] USB External Hub detection problem   Balaji N
• [U-Boot] [PATCH v3 01/10] dm: i2c: Add a uclass for I2C   Masahiro Yamada
  • [U-Boot] [PATCH v3 01/10] dm: i2c: Add a uclass for I2C   Simon Glass
    • [U-Boot] [PATCH v3 01/10] dm: i2c: Add a uclass for I2C   Masahiro Yamada
    • [U-Boot] [PATCH v3 01/10] dm: i2c: Add a uclass for I2C   Heiko Schocher
      • [U-Boot] [PATCH v3 01/10] dm: i2c: Add a uclass for I2C   Simon Glass
  • [U-Boot] [PATCH v3 01/10] dm: i2c: Add a uclass for I2C   Simon Glass
• [U-Boot] [PATCH v3 08/10] dm: Add a simple EEPROM driver   Masahiro Yamada
  • [U-Boot] [PATCH v3 08/10] dm: Add a simple EEPROM driver   Simon Glass
    • [U-Boot] [PATCH v3 08/10] dm: Add a simple EEPROM driver   Masahiro YAMADA
    • [U-Boot] [PATCH v3 08/10] dm: Add a simple EEPROM driver   Przemyslaw Marczak
• [U-Boot] [PATCH v3 10/10] dm: i2c: tegra: Convert to driver model   Masahiro Yamada
• [U-Boot] [PATCH v2] fdt: Fix regression in fdt_pack_reg()   Stefan Roese
• [U-Boot] [PATCH 0/4] Odroid XU3 support additions   Sjoerd Simons
  • [U-Boot] [PATCH 1/4] Odroid-XU3: Drop redundant fields   Sjoerd Simons
  • [U-Boot] [PATCH 2/4] Odroid-XU3: Add entry for DTS EHCI GPIO   Sjoerd Simons
  • [U-Boot] [PATCH 4/4] ODROID-XU3: drop overriding the boot environment   Sjoerd Simons
  • [U-Boot] [PATCH 0/4] Odroid XU3 support additions   Hyungwon Hwang
• [U-Boot] [PATCH 3/4] ODROID-XU3: Make odroid-xu3 an smdk5420 variant   Sjoerd Simons
• [U-Boot] [PATCH 0/4] mmc: Fix recognition and selection of Dual Data Rate mode   Andrew Gabbasov
  • [U-Boot] [PATCH 1/4] mmc: Fix handling of bus widths and DDR card capabilities   Andrew Gabbasov
    • [U-Boot] [PATCH 1/4] mmc: Fix handling of bus widths and DDR card capabilities   Pantelis Antoniou
  • [U-Boot] [PATCH 2/4] mmc: Fix Dual Data Rate capability recognition   Andrew Gabbasov
    • [U-Boot] [PATCH 2/4] mmc: Fix Dual Data Rate capability recognition   Pantelis Antoniou
  • [U-Boot] [PATCH 3/4] mmc: Fix block length for DDR mode   Andrew Gabbasov
    • [U-Boot] [PATCH 3/4] mmc: Fix block length for DDR mode   Pantelis Antoniou
  • [U-Boot] [PATCH 4/4] mmc: dw_mmc: Use active DDR mode flag   Andrew Gabbasov
    • [U-Boot] [PATCH 4/4] mmc: dw_mmc: Use active DDR mode flag   Pantelis Antoniou
• [U-Boot] [PATCH v2] fdt: Fix regression in fdt_pack_reg()   Vince Hsu
• [U-Boot] Please pull u-boot-fdt.git   Simon Glass
• [U-Boot] Please pull u-boot-fdt.git (take 2)   Simon Glass
  • [U-Boot] Please pull u-boot-fdt.git (take 2)   Tom Rini
• [U-Boot] [PATCH v3] fs/ext4/ext4fs.c, fs/fs.c fs/fat/fat_write.c: Adjust 64bit math methods   Pierre Aubert
• [U-Boot] WARNING Could not get liodn of node /pcie at ffe240000: FDT_ERR_NOTFOUND   York Sun
  • [U-Boot] WARNING Could not get liodn of node /pcie at ffe240000: FDT_ERR_NOTFOUND   Joakim Tjernlund
    • [U-Boot] WARNING Could not get liodn of node /pcie at ffe240000: FDT_ERR_NOTFOUND   York Sun
• [U-Boot] [PATCH v9 1/2] Odroid-XU3: Add support for Odroid-XU3   Simon Glass
  • [U-Boot] [PATCH v9 1/2] Odroid-XU3: Add support for Odroid-XU3   Hyungwon Hwang
• [U-Boot] [PATCH 1/2] ARM: rpi: rename rpi_b to rpi   Stephen Warren
  • [U-Boot] [PATCH 1/2] ARM: rpi: rename rpi_b to rpi   Simon Glass
• [U-Boot] [PATCH v4 3/3] ARM: tegra: Add support for nyan-big board   Stephen Warren
  • [U-Boot] [PATCH v4 3/3] ARM: tegra: Add support for nyan-big board   Simon Glass
• [U-Boot] [PATCH v3 3/4] tegra: config: Enable FIT and device tree for all boards   Stephen Warren
  • [U-Boot] [PATCH v3 3/4] tegra: config: Enable FIT and device tree for all boards   Simon Glass
• [U-Boot] [PATCH v3 4/8] common: spl: Add interactive DDR debugger support for SPL image   York Sun
• [U-Boot] Bare x86 support is merged to u-boot-x86   Bruce_Leonard at selinc.com
• [U-Boot] [PATCH 1/2] i2c: Fix deselection of muxes   Mark Tomlinson
  • [U-Boot] [PATCH 1/2] i2c: Fix deselection of muxes   Chris Packham
• [U-Boot] [PATCH 2/2] i2c: Correct spelling error   Mark Tomlinson
  • [U-Boot] [PATCH 2/2] i2c: Correct spelling error   Chris Packham
• [U-Boot] [OpenQuestion] stdint.h and inttypes.h in U-Boot ?   Simon Glass
  • [U-Boot] [OpenQuestion] stdint.h and inttypes.h in U-Boot ?   Masahiro YAMADA
    • [U-Boot] [OpenQuestion] stdint.h and inttypes.h in U-Boot ?   Simon Glass
      • [U-Boot] [OpenQuestion] stdint.h and inttypes.h in U-Boot ?   Masahiro Yamada
      • [U-Boot] [OpenQuestion] stdint.h and inttypes.h in U-Boot ?   Simon Glass
      • [U-Boot] [OpenQuestion] stdint.h and inttypes.h in U-Boot ?   Masahiro Yamada
      • [U-Boot] [OpenQuestion] stdint.h and inttypes.h in U-Boot ?   Simon Glass
• [U-Boot] Bare x86 support is merged to u-boot-x86   Simon Glass
  • [U-Boot] Bare x86 support is merged to u-boot-x86   Bruce_Leonard at selinc.com
    • [U-Boot] Bare x86 support is merged to u-boot-x86   Bin Meng
      • [U-Boot] Bare x86 support is merged to u-boot-x86   Christian Gmeiner
      • [U-Boot] Bare x86 support is merged to u-boot-x86   Bin Meng
• [U-Boot] Pull request: u-boot-uniphier/master   Tom Rini
• [U-Boot] [PATCH v3] fs/ext4/ext4fs.c, fs/fs.c fs/fat/fat_write.c: Adjust 64bit math methods   Tom Rini
• [U-Boot] [PATCH 0/2] stv0991: driver model support for pl01x   Vikas Manocha
• [U-Boot] [PATCH 1/2] stv0991: increase the initial ram size config   Vikas Manocha
  • [U-Boot] [U-Boot, 1/2] stv0991: increase the initial ram size config   Tom Rini
• [U-Boot] [PATCH 2/2] dm: stv0991: Move serial to driver model   Vikas Manocha
  • [U-Boot] [U-Boot,2/2] dm: stv0991: Move serial to driver model   Tom Rini
• [U-Boot] m68k: Build problems on some boards   Angelo Dureghello
  • [U-Boot] m68k: Build problems on some boards   Angelo Dureghello
  • [U-Boot] m68k: Build problems on some boards   Masahiro Yamada
    • [U-Boot] m68k: Build problems on some boards   Angelo Dureghello
      • [U-Boot] m68k: Build problems on some boards   Masahiro YAMADA
      • [U-Boot] m68k: Build problems on some boards   Angelo Dureghello
• [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3   Simon Glass
  • [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3   Lukasz Majewski
    • [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3   Suriyan Ramasami
    • [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3   Kevin Hilman
      • [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3   Simon Glass
      • [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3   Kevin Hilman
      • [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3   Simon Glass
      • [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3   Kevin Hilman
      • [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3   Simon Glass
      • [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3   Kevin Hilman
      • [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3   Hyungwon Hwang
      • [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3   Lukasz Majewski
• [U-Boot] Please pull u-boot-x86.git branch 'sandbox'   Simon Glass
  • [U-Boot] Please pull u-boot-x86.git branch 'sandbox'   Tom Rini
• [U-Boot] Hi Simon, Problems about RSA public exponents for verified boot   Simon Glass
  • [U-Boot] Hi Simon, Problems about RSA public exponents for verified boot   Michael van der Westhuizen
    • [U-Boot] Hi Simon, Problems about RSA public exponents for verified boot   Simon Glass
• [U-Boot] [PATCH 0/17] buildman: A few more features and improvements (Christmas edition)   Simon Glass
  • [U-Boot] [PATCH 01/17] buildman: Add tests that check the correct output directory is used   Simon Glass
    • [U-Boot] [PATCH 01/17] buildman: Add tests that check the correct output directory is used   Simon Glass
  • [U-Boot] [PATCH 02/17] buildman: Put build in 'current', not 'current/current'   Simon Glass
  • [U-Boot] [PATCH 03/17] buildman: Don't prune output space for 'current source' build   Simon Glass
  • [U-Boot] [PATCH 04/17] buildman: Try to guess the upstream commit   Simon Glass
  • [U-Boot] [PATCH 05/17] buildman: Add an option to flatten output directory trees   Simon Glass
  • [U-Boot] [PATCH 06/17] buildman: Don't remove entire output directory when testing   Simon Glass
  • [U-Boot] [PATCH 07/17] buildman: Allow specifying a range of commits to build   Simon Glass
    • [U-Boot] [PATCH 07/17] buildman: Allow specifying a range of commits to build   Daniel Schwierzeck
  • [U-Boot] [PATCH 08/17] buildman: Try to avoid hard-coded string parsing   Simon Glass
  • [U-Boot] [PATCH 09/17] buildman: Put the toolchain path first instead of last in PATH   Simon Glass
  • [U-Boot] [PATCH 10/17] buildman: Add an option to use the full tool chain path   Simon Glass
  • [U-Boot] [PATCH 11/17] buildman: Add a note about Python pre-requisites   Simon Glass
  • [U-Boot] [PATCH 12/17] buildman: Add documentation about the .buildman file   Simon Glass
  • [U-Boot] [PATCH 13/17] buildman: Don't complain about missing sections in ~/.buildman   Simon Glass
  • [U-Boot] [PATCH 14/17] buildman: Don't use the local settings when running tests   Simon Glass
  • [U-Boot] [PATCH 15/17] buildman: Allow architecture to alias to multiple toolchains   Simon Glass
  • [U-Boot] [PATCH 16/17] buildman: Add the option to download toolchains from kernel.org   Simon Glass
  • [U-Boot] [PATCH 17/17] buildman: Add an option to write the full build output   Simon Glass
  • [U-Boot] [PATCH 0/17] buildman: A few more features and improvements (Christmas edition)   Simon Glass
    • [U-Boot] [PATCH 0/17] buildman: A few more features and improvements (Christmas edition)   Simon Glass
      • [U-Boot] [PATCH 0/17] buildman: A few more features and improvements (Christmas edition)   Steve Rae
• [U-Boot] [PATCH 0/25] tegra: Add eDP support for nyan-big   Simon Glass
  • [U-Boot] [PATCH 01/25] dm: tegra: config: Increase pre-reloc malloc() to 6KB   Simon Glass
  • [U-Boot] [PATCH 02/25] fdt: Add binding decode function for display-timings   Simon Glass
  • [U-Boot] [PATCH 03/25] tegra: Move the pww into tegra-common   Simon Glass
  • [U-Boot] [PATCH 04/25] tegra: pwm: Allow the clock rate to be left as is   Simon Glass
  • [U-Boot] [PATCH 05/25] tegra: Move checkboard() into the board code   Simon Glass
  • [U-Boot] [PATCH 06/25] tegra: Add a board ID function   Simon Glass
  • [U-Boot] [PATCH 07/25] power: Export register access functions from as3722   Simon Glass
  • [U-Boot] [PATCH 08/25] tegra: Provide a function to allow LCD PMIC setup   Simon Glass
  • [U-Boot] [PATCH 09/25] tegra: Add support for setting up a as3722 PMIC   Simon Glass
  • [U-Boot] [PATCH 10/25] tegra: nyan-big: Add LCD PMIC init and board ID   Simon Glass
  • [U-Boot] [PATCH 11/25] tegra124: dts: Add host1x node to provide display information   Simon Glass
  • [U-Boot] [PATCH 12/25] tegra: config: Use CONFIG_LCD to detect LCD presence   Simon Glass
  • [U-Boot] [PATCH 13/25] tegra: clock: Add checking for invalid clock IDs   Simon Glass
  • [U-Boot] [PATCH 14/25] tegra: clock: Split the clock source code into a separate function   Simon Glass
  • [U-Boot] [PATCH 15/25] tegra124: clock: Add display clocks and functions   Simon Glass
  • [U-Boot] [PATCH 16/25] tegra: Move display controller header into common   Simon Glass
  • [U-Boot] [PATCH 17/25] video: Add drm_dp_helper.h   Simon Glass
  • [U-Boot] [PATCH 18/25] edid: Add a function to read detailed monitor timings   Simon Glass
  • [U-Boot] [PATCH 19/25] dm: video: Add a uclass for display port   Simon Glass
  • [U-Boot] [PATCH 20/25] tegra: dts: nyan-big: Add definitions for eDP display   Simon Glass
  • [U-Boot] [PATCH 21/25] tegra: video: Support serial output resource (SOR) on tegra124   Simon Glass
  • [U-Boot] [PATCH 22/25] tegra: video: Add Embedded DisplayPort driver   Simon Glass
  • [U-Boot] [PATCH 23/25] tegra: video: support eDP displays on Tegra124 devices   Simon Glass
  • [U-Boot] [PATCH 24/25] tegra: config: nyan-big: Enable LCD   Simon Glass
  • [U-Boot] [PATCH 25/25] tegra124: video: Add full link training for eDP   Simon Glass
• [U-Boot] [PATCH 1/2] imx:mx6sabresd add board level support for usb   Peng Fan
  • [U-Boot] [PATCH 1/2] imx:mx6sabresd add board level support for usb   Stefano Babic
• [U-Boot] [PATCH 2/2] imx:mx6qarm2 add board level support for usb   Peng Fan
  • [U-Boot] [PATCH 2/2] imx:mx6qarm2 add board level support for usb   Stefano Babic
• [U-Boot] [PATCH V2 00/12] cleanup and refactor lcd.c   Stephen Warren
• [U-Boot] [PATCH] powerpc/t1040qds: Add support of SD boot for T1040QDS Board   York Sun
• [U-Boot] [Driver Model] post_bind() and pre_unbind() handler   Masahiro Yamada
  • [U-Boot] [Driver Model] post_bind() and pre_unbind() handler   Simon Glass
    • [U-Boot] [Driver Model] post_bind() and pre_unbind() handler   Masahiro YAMADA
      • [U-Boot] [Driver Model] post_bind() and pre_unbind() handler   Simon Glass
• [U-Boot] [PATCH] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for P5040DS   Gaurav Rana
  • [U-Boot] [PATCH] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for P5040DS   York Sun
• [U-Boot] Incomplete type declarations in arch/Kconfig (U-Boot-2014.10)   Guilhem Malichier
  • [U-Boot] Incomplete type declarations in arch/Kconfig (U-Boot-2014.10)   Masahiro Yamada
    • [U-Boot] Incomplete type declarations in arch/Kconfig (U-Boot-2014.10)   Guilhem Malichier
• [U-Boot] [PATCH v10 0/4] Adds support for Exynos5422 odroid xu3 board   Hyungwon Hwang
  • [U-Boot] [PATCH v10 1/4] config: exynos5420: move non common configs to specific board files   Hyungwon Hwang
    • [U-Boot] [PATCH v10 1/4] config: exynos5420: move non common configs to specific board files   Simon Glass
    • [U-Boot] [PATCH v10 1/4] config: exynos5420: move non common configs to specific board files   Sjoerd Simons
  • [U-Boot] [PATCH v10 2/4] Odroid-XU3: Add support for Odroid-XU3   Hyungwon Hwang
    • [U-Boot] [PATCH v10 2/4] Odroid-XU3: Add support for Odroid-XU3   Simon Glass
    • [U-Boot] [PATCH v10 2/4] Odroid-XU3: Add support for Odroid-XU3   Sjoerd Simons
      • [U-Boot] [PATCH v10 2/4] Odroid-XU3: Add support for Odroid-XU3   Hyungwon Hwang
  • [U-Boot] [PATCH v10 3/4] Odroid-XU3: Add documentation for Odroid-XU3   Hyungwon Hwang
    • [U-Boot] [PATCH v10 3/4] Odroid-XU3: Add documentation for Odroid-XU3   Simon Glass
      • [U-Boot] [PATCH v10 3/4] Odroid-XU3: Add documentation for Odroid-XU3   Hyungwon Hwang
  • [U-Boot] [PATCH v10 4/4] Odroid-XU3: Add entry for DTS EHCI GPIO   Hyungwon Hwang
    • [U-Boot] [PATCH v10 4/4] Odroid-XU3: Add entry for DTS EHCI GPIO   Simon Glass
      • [U-Boot] [PATCH v10 4/4] Odroid-XU3: Add entry for DTS EHCI GPIO   Sjoerd Simons
  • [U-Boot] [PATCH v10 0/4] Adds support for Exynos5422 odroid xu3 board   Przemyslaw Marczak
    • [U-Boot] [PATCH v10 0/4] Adds support for Exynos5422 odroid xu3 board   Suriyan Ramasami
      • [U-Boot] [PATCH v10 0/4] Adds support for Exynos5422 odroid xu3 board   Inha Song
      • [U-Boot] [PATCH v10 0/4] Adds support for Exynos5422 odroid xu3 board   Hyungwon Hwang
    • [U-Boot] [PATCH v10 0/4] Adds support for Exynos5422 odroid xu3 board   Simon Glass
      • [U-Boot] [PATCH v10 0/4] Adds support for Exynos5422 odroid xu3 board   Przemyslaw Marczak
      • [U-Boot] [PATCH v10 0/4] Adds support for Exynos5422 odroid xu3 board   Simon Glass
      • [U-Boot] [PATCH v10 0/4] Adds support for Exynos5422 odroid xu3 board   Hyungwon Hwang
• [U-Boot] [PATCH v2 1/7] arm: rmobile: rcar: Move module control register to header file of SoC   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH v2 2/7] arm: rmobile: rcar: Move control macro of mstp to arch-rmobile/rcar-mstp.h   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH v2 3/7] arm: rmobile: rcar: Move arch_preboot_os function to rcar-gen2-common/common.c   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH v2 4/7] arm: rmobile: rcar: Add mstp_setclrbits and mstp_setclrbits_le32   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH v2 5/7] arm: rmobile: rcar: Add infomation of bits for module control register   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH v2 6/7] arm: rmobile: rcar: Add structure for infomation of module control register   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH v2 7/7] arm: rmobile: rcar: Stop clock prior to booting kernel   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS, if available   Guillaume Gardet
• [U-Boot] [PATCH 00/18] Support for eMMC partitioning and related fixes   Joakim Tjernlund
• [U-Boot] [PATCH] powerpc/bsc913x: Convert to use generic board code   Harninder Rai
  • [U-Boot] [PATCH] powerpc/bsc913x: Convert to use generic board code   York Sun
• [U-Boot] [PATCH V2 09/12] lcd: introduce getters for bg/fg color   Nikita Kiryanov
• [U-Boot] [PATCH V2 06/12] lcd: replace CONSOLE_(ROWS|COLS) with variables   Nikita Kiryanov
• [U-Boot] Please pull u-boot-x86.git   Tom Rini
• [U-Boot] [PATCH] mtd: nand: mxs: Add support for multiple NAND chips   Stefan Roese
  • [U-Boot] [PATCH] mtd: nand: mxs: Add support for multiple NAND chips   Marek Vasut
    • [U-Boot] [PATCH] mtd: nand: mxs: Add support for multiple NAND chips   Scott Wood
      • [U-Boot] [PATCH] mtd: nand: mxs: Add support for multiple NAND chips   Marek Vasut
      • [U-Boot] [PATCH] mtd: nand: mxs: Add support for multiple NAND chips   Scott Wood
      • [U-Boot] [PATCH] mtd: nand: mxs: Add support for multiple NAND chips   Marek Vasut
      • [U-Boot] [PATCH] mtd: nand: mxs: Add support for multiple NAND chips   Scott Wood
      • [U-Boot] [PATCH] mtd: nand: mxs: Add support for multiple NAND chips   Stefan Roese
      • [U-Boot] [PATCH] mtd: nand: mxs: Add support for multiple NAND chips   Marek Vasut
• [U-Boot] [PATCH V2 06/12] lcd: replace CONSOLE_(ROWS|COLS) with variables   Simon Glass
• [U-Boot] Building fw_env tools seems broken   Denys Dmytriyenko
  • [U-Boot] Building fw_env tools seems broken   Masahiro Yamada
    • [U-Boot] Building fw_env tools seems broken   Denys Dmytriyenko
• [U-Boot] [Patch v3] driver/ddr/fsl: Fix MRC_CYC calculation for DDR3   York Sun
  • [U-Boot] [Patch v3] driver/ddr/fsl: Fix MRC_CYC calculation for DDR3   York Sun
• [U-Boot] [Patch v3] powerpc/mpc85xx: Fix DDR TLB mapping leftover   York Sun
  • [U-Boot] [Patch v3] powerpc/mpc85xx: Fix DDR TLB mapping leftover   York Sun
• [U-Boot] [PATCH v2 0/12] bootm: Tidy up decompression and add tests   Simon Glass
  • [U-Boot] [PATCH v2 01/12] lzma: fix buffer bound check error further   Simon Glass
  • [U-Boot] [PATCH v2 02/12] bootm: Move compression progress/error messages into a function   Simon Glass
  • [U-Boot] [PATCH v2 03/12] sandbox: Correct ordering of 'sb save' commands   Simon Glass
  • [U-Boot] [PATCH v2 04/12] test: Add DEBUG output option to test-fit.py   Simon Glass
  • [U-Boot] [PATCH v2 05/12] bootm: Export bootm_decomp_image()   Simon Glass
  • [U-Boot] [PATCH v2 06/12] test: Rename test_compression to ut_compression   Simon Glass
  • [U-Boot] [PATCH v2 07/12] test: Add unit tests for bootm image decompression   Simon Glass
  • [U-Boot] [PATCH v2 08/12] bootm: Use print_decomp_msg() in all cases   Simon Glass
  • [U-Boot] [PATCH v2 09/12] bootm: Factor out common parts of image decompression code   Simon Glass
  • [U-Boot] [PATCH v2 10/12] bzlib: Update destLen even on error   Simon Glass
  • [U-Boot] [PATCH v2 11/12] gunzip: Update lenp even on error   Simon Glass
  • [U-Boot] [PATCH v2 12/12] lzo: Update dst_len even on error   Simon Glass
• [U-Boot] Problem converting da850evm to generic board and use libfdt   Peter Howard
  • [U-Boot] Problem converting da850evm to generic board and use libfdt   Simon Glass
    • [U-Boot] Problem converting da850evm to generic board and use libfdt   Peter Howard
      • [U-Boot] Problem converting da850evm to generic board and use libfdt   Simon Glass
      • [U-Boot] Problem converting da850evm to generic board and use libfdt   Peter Howard
      • [U-Boot] Problem converting da850evm to generic board and use libfdt   Simon Glass
      • [U-Boot] Problem converting da850evm to generic board and use libfdt   Peter Howard
      • [U-Boot] Problem converting da850evm to generic board and use libfdt   Simon Glass
      • [U-Boot] Problem converting da850evm to generic board and use libfdt   Peter Howard
      • [U-Boot] Problem converting da850evm to generic board and use libfdt   Simon Glass
      • [U-Boot] Problem converting da850evm to generic board and use libfdt   Peter Howard
      • [U-Boot] Problem converting da850evm to generic board and use libfdt   Simon Glass
      • [U-Boot] Problem converting da850evm to generic board and use libfdt   Simon Glass
      • [U-Boot] Problem converting da850evm to generic board and use libfdt   Peter Howard
      • [U-Boot] Problem converting da850evm to generic board and use libfdt   Peter Howard
      • [U-Boot] Problem converting da850evm to generic board and use libfdt   Simon Glass
• [U-Boot] [PATCH 1/3] sf: stmicro: Add support for N25Q32   Jagan Teki
• [U-Boot] [PATCH 2/2] spi: add common spi3 controller driver   Jagan Teki
• [U-Boot] [PATCH] tools: env: fix build error   Masahiro Yamada
• [U-Boot] [PATCH] mtd/spi: Add support for SST25WF040B   Shengzhou Liu
  • [U-Boot] [PATCH] mtd/spi: Add support for SST25WF040B   Jagan Teki
• [U-Boot] [PATCH v2 00/12] spi: sf: ICH SPI driver fix and flash params update   Bin Meng
  • [U-Boot] [PATCH v2 00/12] spi: sf: ICH SPI driver fix and flash params update   Simon Glass
    • [U-Boot] [PATCH v2 00/12] spi: sf: ICH SPI driver fix and flash params update   Jagan Teki
• [U-Boot] [PATCH v4 0/9] Add SD/NAND boot support for LS1021AQDS/TWR board   Alison Wang
  • [U-Boot] [PATCH v4 1/9] ls102xa: pblimage: Add pblimage tool support for LS102xA   Alison Wang
    • [U-Boot] [PATCH v4 1/9] ls102xa: pblimage: Add pblimage tool support for LS102xA   York Sun
  • [U-Boot] [PATCH v4 2/9] spl: Use u-boot.img instead of u-boot.bin   Alison Wang
    • [U-Boot] [PATCH v4 2/9] spl: Use u-boot.img instead of u-boot.bin   York Sun
  • [U-Boot] [PATCH v4 3/9] arm: spl: Add I2C linker list in generic .lds   Alison Wang
    • [U-Boot] [PATCH v4 3/9] arm: spl: Add I2C linker list in generic .lds   York Sun
  • [U-Boot] [PATCH v4 4/9] common: spl: Add interactive DDR debugger support for SPL image   Alison Wang
    • [U-Boot] [PATCH v4 4/9] common: spl: Add interactive DDR debugger support for SPL image   York Sun
  • [U-Boot] [PATCH v4 5/9] kconfig: ls1021a: add SUPPORT_SPL   Alison Wang
    • [U-Boot] [PATCH v4 5/9] kconfig: ls1021a: add SUPPORT_SPL   Masahiro Yamada
      • [U-Boot] [PATCH v4 5/9] kconfig: ls1021a: add SUPPORT_SPL   Huan Wang
    • [U-Boot] [PATCH v4 5/9] kconfig: ls1021a: add SUPPORT_SPL   York Sun
  • [U-Boot] [PATCH v4 6/9] ls102xa: qixis: Add CONFIG_QIXIS_I2C_ACCESS macro   Alison Wang
    • [U-Boot] [PATCH v4 6/9] ls102xa: qixis: Add CONFIG_QIXIS_I2C_ACCESS macro   York Sun
  • [U-Boot] [PATCH v4 7/9] arm: ls102xa: Add SD boot support for LS1021AQDS board   Alison Wang
    • [U-Boot] [PATCH v4 7/9] arm: ls102xa: Add SD boot support for LS1021AQDS board   York Sun
  • [U-Boot] [PATCH v4 8/9] arm: ls102xa: Add SD boot support for LS1021ATWR board   Alison Wang
    • [U-Boot] [PATCH v4 8/9] arm: ls102xa: Add SD boot support for LS1021ATWR board   York Sun
  • [U-Boot] [PATCH v4 9/9] arm: ls102xa: Add NAND boot support for LS1021AQDS board   Alison Wang
    • [U-Boot] [PATCH v4 9/9] arm: ls102xa: Add NAND boot support for LS1021AQDS board   York Sun
• [U-Boot] [PATCH v3 4/8] common: spl: Add interactive DDR debugger support for SPL image   Huan Wang
• [U-Boot] [PATCH] net/fm: update ft_fixup_port to differentiate dual-role mac   Shengzhou Liu
  • [U-Boot] [PATCH] net/fm: update ft_fixup_port to differentiate dual-role mac   York Sun
• [U-Boot] [PATCH] kconfig: ls102xa: Change the prompt messages   Alison Wang
  • [U-Boot] [PATCH] kconfig: ls102xa: Change the prompt messages   York Sun
• [U-Boot] [PATCH 0/2] Consolidate asmlinkage defines   Masahiro Yamada
  • [U-Boot] [PATCH 2/2] ARM: remove redundant asmlinkage define   Masahiro Yamada
    • [U-Boot] [PATCH 2/2] ARM: remove redundant asmlinkage define   Simon Glass
• [U-Boot] [PATCH 1/2] x86: move arch-specific asmlinkage to <asm/linkage.h>   Masahiro Yamada
  • [U-Boot] [PATCH 1/2] x86: move arch-specific asmlinkage to <asm/linkage.h>   Simon Glass
    • [U-Boot] [PATCH 1/2] x86: move arch-specific asmlinkage to <asm/linkage.h>   Masahiro Yamada
      • [U-Boot] [PATCH 1/2] x86: move arch-specific asmlinkage to <asm/linkage.h>   Simon Glass
      • [U-Boot] [PATCH 1/2] x86: move arch-specific asmlinkage to <asm/linkage.h>   Simon Glass
• [U-Boot] [PATCH][v2] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for P5040DS   Gaurav Rana
• [U-Boot] [PATCH 1/2] mmc: sh_mmcif: Use DIV_ROUND_UP and fls instead of calculation loop   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 2/2] mmc: sh_mmcif: Change maximum and minimum value of MMC clock   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] mmc: sh_mmcif: Add support rmobile   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 0/6] ARM: atmel: enable usb ethernet gadget   Bo Shen
  • [U-Boot] [PATCH 1/6] ARM: atmel: sama5d4: add usb platform data   Bo Shen
  • [U-Boot] [PATCH 2/6] ARM: atmel: sama5d4: add usb device initial code   Bo Shen
  • [U-Boot] [PATCH 3/6] ARM: atmel: sama5d4ek: add option for usb ethernet gadget   Bo Shen
  • [U-Boot] [PATCH 4/6] ARM: atmel: sama5d4ek: enable usb ethernet gadget   Bo Shen
  • [U-Boot] [PATCH 5/6] ARM: atmel: sama5d4_xplained: add option for usb ethernet gadget   Bo Shen
  • [U-Boot] [PATCH 6/6] ARM: atmel: sama5d4_xplained: enable usb ethernet gadget   Bo Shen
• [U-Boot] [PATCH v9 1/2] Odroid-XU3: Add support for Odroid-XU3   Sjoerd Simons
• [U-Boot] [PATCH] tools/kwbimage.c: fix build on m68k   Angelo Dureghello
  • [U-Boot] [PATCH] tools/kwbimage.c: fix build on m68k   Lukasz Majewski
    • [U-Boot] [PATCH] tools/kwbimage.c: fix build on m68k   Angelo Dureghello
• [U-Boot] [PATCH v3 01/10] dm: i2c: Add a uclass for I2C   Masahiro Yamada
  • [U-Boot] [PATCH v3 01/10] dm: i2c: Add a uclass for I2C   Simon Glass
    • [U-Boot] [PATCH v3 01/10] dm: i2c: Add a uclass for I2C   Masahiro YAMADA
• [U-Boot] [PATCH v3 10/10] dm: i2c: tegra: Convert to driver model   Masahiro Yamada
  • [U-Boot] [PATCH v3 10/10] dm: i2c: tegra: Convert to driver model   Simon Glass
    • [U-Boot] [PATCH v3 10/10] dm: i2c: tegra: Convert to driver model   Masahiro YAMADA
      • [U-Boot] [PATCH v3 10/10] dm: i2c: tegra: Convert to driver model   Simon Glass
• [U-Boot] RFC Pin Configuration Device Tree Bindings for Altera Arria10 SOCFPGA   Pavel Machek
  • [U-Boot] RFC Pin Configuration Device Tree Bindings for Altera Arria10 SOCFPGA   Simon Glass
    • [U-Boot] RFC Pin Configuration Device Tree Bindings for Altera Arria10 SOCFPGA   Dinh Nguyen
    • [U-Boot] RFC Pin Configuration Device Tree Bindings for Altera Arria10 SOCFPGA   Matthew Gerlach
• [U-Boot] exynos: snow: external SD/MMC broken   Guillaume Gardet
  • [U-Boot] exynos: snow: external SD/MMC broken   Minkyu Kang
    • [U-Boot] exynos: snow: external SD/MMC broken   Jaehoon Chung
      • [U-Boot] exynos: snow: external SD/MMC broken   Guillaume Gardet
      • [U-Boot] exynos: snow: external SD/MMC broken   Suriyan Ramasami
• [U-Boot] Attached DTB no longer supported u-boot.imx?   Bill Pringlemeir
  • [U-Boot] Attached DTB no longer supported u-boot.imx?   Tom Rini
• [U-Boot] [PATCH v2] arm: build arch memset/memcpy in Thumb2 mode   Bill Pringlemeir
  • [U-Boot] [PATCH v2] arm: build arch memset/memcpy in Thumb2 mode   Stefan Agner
    • [U-Boot] [PATCH v2] arm: build arch memset/memcpy in Thumb2 mode   Andreas Färber
      • [U-Boot] [PATCH v2] arm: build arch memset/memcpy in Thumb2 mode   Stefan Agner
      • [U-Boot] [PATCH v2] arm: build arch memset/memcpy in Thumb2 mode   Albert ARIBAUD
• [U-Boot] [PATCH v3 0/10] dm: Add I2C support and convert sandbox, tegra   Przemyslaw Marczak
  • [U-Boot] [PATCH v3 0/10] dm: Add I2C support and convert sandbox, tegra   Simon Glass
    • [U-Boot] [PATCH v3 0/10] dm: Add I2C support and convert sandbox, tegra   Przemyslaw Marczak
      • [U-Boot] [PATCH v3 0/10] dm: Add I2C support and convert sandbox, tegra   Simon Glass
• [U-Boot] [PATCH 0/8] PSCI v0.2 framework for ARMv8   Mark Rutland
• [U-Boot] [PATCH v1] tools/kwboot: Allow just -t to function   Suriyan Ramasami
  • [U-Boot] [PATCH v1] tools/kwboot: Allow just -t to function   Stefan Roese
• [U-Boot] image-fdt: boot_get_fdt() return value when no DTB exists   Tom Rini
• [U-Boot] [PATCH 1/1] ARM: kirkwood: mvebu_mmc: Speed up access time   Gérald KERMA
• [U-Boot] [PATCH 0/2] arm: vf610: Change Vybrid Tower boot memory.   Bill Pringlemeir
• [U-Boot] [PATCH 1/2] arm: vf610: Remove duplicate MTD defines.   Bill Pringlemeir
• [U-Boot] [PATCH 2/2] arm: vf610: Initial load to 1/2MB OC gfxRAM.   Bill Pringlemeir
  • [U-Boot] [PATCH 2/2] arm: vf610: Initial load to 1/2MB OC gfxRAM.   Stefan Agner
• [U-Boot] RFC Pin Configuration Device Tree Bindings for Altera Arria10 SOCFPGA   Simon Glass
  • [U-Boot] RFC Pin Configuration Device Tree Bindings for Altera Arria10 SOCFPGA   Pavel Machek
    • [U-Boot] RFC Pin Configuration Device Tree Bindings for Altera Arria10 SOCFPGA   mgerlach
      • [U-Boot] RFC Pin Configuration Device Tree Bindings for Altera Arria10 SOCFPGA   Marek Vasut
• [U-Boot] [PATCH v4] mpc85xx: inhibit bman portals by default   Jeffrey Ladouceur
• [U-Boot] [PATCH] powerpc/T10xx: Fix number of portals   Jeffrey Ladouceur
  • [U-Boot] [PATCH] powerpc/T10xx: Fix number of portals   York Sun
• [U-Boot] [PATCH v3 01/10] dm: i2c: Add a uclass for I2C   Masahiro Yamada
  • [U-Boot] [PATCH v3 01/10] dm: i2c: Add a uclass for I2C   Simon Glass
    • [U-Boot] [PATCH v3 01/10] dm: i2c: Add a uclass for I2C   Masahiro Yamada
      • [U-Boot] [PATCH v3 01/10] dm: i2c: Add a uclass for I2C   Simon Glass
  • [U-Boot] [PATCH v3 01/10] dm: i2c: Add a uclass for I2C   Simon Glass
    • [U-Boot] [PATCH v3 01/10] dm: i2c: Add a uclass for I2C   Masahiro Yamada
      • [U-Boot] [PATCH v3 01/10] dm: i2c: Add a uclass for I2C   Simon Glass
• [U-Boot] [PATCH] net: bootp: as CONFIG_BOOTP_SERVERIP is defined, keep bootfile not changed   Josh Wu
• [U-Boot] [PATCH v3 01/10] dm: i2c: Add a uclass for I2C   Masahiro Yamada
  • [U-Boot] [PATCH v3 01/10] dm: i2c: Add a uclass for I2C   Simon Glass
• [U-Boot] [PATCH] crypto/fsl: Fix RNG instatntiation failure.   Gaurav Rana
• [U-Boot] [PATCH][v2] crypto/fsl: Fix RNG instantiation failure.   Gaurav Rana
  • [U-Boot] [PATCH][v2] crypto/fsl: Fix RNG instantiation failure.   York Sun
• [U-Boot] Using u-boot with qemu-system-mips(qemu-2.1.2) caused infinite loop   jiang
  • [U-Boot] Using u-boot with qemu-system-mips(qemu-2.1.2) caused infinite loop   Daniel Schwierzeck
    • [U-Boot] Using u-boot with qemu-system-mips(qemu-2.1.2) caused infinite loop   jiang
• [U-Boot] [PATCH] ot1200: add fsuuid command   Christian Gmeiner
  • [U-Boot] [PATCH] ot1200: add fsuuid command   Stefano Babic
• [U-Boot] [PATCH] ot1200: enable support for USB_STORAGE   Christian Gmeiner
  • [U-Boot] [PATCH] ot1200: enable support for USB_STORAGE   Stefano Babic
• [U-Boot] [PATCH v2 2/4] gw_ventana: Move the DCD settings to spl code   Stefan Roese
• [U-Boot] [PATCH] arm: mx6: gw_ventana: Change clock init to enable NAND related clocks   Stefan Roese
  • [U-Boot] [PATCH] arm: mx6: gw_ventana: Change clock init to enable NAND related clocks   Fabio Estevam
  • [U-Boot] [PATCH] arm: mx6: gw_ventana: Change clock init to enable NAND related clocks   Stefano Babic
• [U-Boot] setting correct count on u-boot   myworktask
• [U-Boot] [PATCH] configs: LS1012XA: Modify CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS for LS102XA   Nikhil Badola
• [U-Boot] [PATCH] get_maintainer.pl: fix source tree detection   Simon Glass
• [U-Boot] [PATCH v5 1/3] dts: Bring in Chrome OS keyboard device tree definition   Simon Glass
  • [U-Boot] [PATCH v5 2/3] tegra: dts: Sync tegra124.dtsi with linux kernel   Simon Glass
    • [U-Boot] [PATCH v5 2/3] tegra: dts: Sync tegra124.dtsi with linux kernel   Simon Glass
  • [U-Boot] [PATCH v5 3/3] ARM: tegra: Add support for nyan-big board   Simon Glass
    • [U-Boot] [PATCH v5 3/3] ARM: tegra: Add support for nyan-big board   Simon Glass
  • [U-Boot] [PATCH v5 1/3] dts: Bring in Chrome OS keyboard device tree definition   Sjoerd Simons
    • [U-Boot] [PATCH v5 1/3] dts: Bring in Chrome OS keyboard device tree definition   Simon Glass
      • [U-Boot] [PATCH v5 1/3] dts: Bring in Chrome OS keyboard device tree definition   Simon Glass
• [U-Boot] [PATCH] Revert "ARM: SPL: do not set gd again"   Tom Rini
• [U-Boot] [PATCH 00/25] x86: Add Intel Queensbay platform support   Bin Meng
  • [U-Boot] [PATCH 00/25] x86: Add Intel Queensbay platform support   Simon Glass
    • [U-Boot] [PATCH 00/25] x86: Add Intel Queensbay platform support   Bin Meng
      • [U-Boot] [PATCH 00/25] x86: Add Intel Queensbay platform support   Simon Glass
      • [U-Boot] [PATCH 00/25] x86: Add Intel Queensbay platform support   Bin Meng
• [U-Boot] [PATCH 01/25] x86: Make ROM_SIZE configurable in Kconfig   Bin Meng
  • [U-Boot] [PATCH 01/25] x86: Make ROM_SIZE configurable in Kconfig   Simon Glass
• [U-Boot] [PATCH 02/25] tools/ifdtool: Support writing multiple files (-w) simultaneously   Bin Meng
  • [U-Boot] [PATCH 02/25] tools/ifdtool: Support writing multiple files (-w) simultaneously   Simon Glass
    • [U-Boot] [PATCH 02/25] tools/ifdtool: Support writing multiple files (-w) simultaneously   Bin Meng
• [U-Boot] [PATCH 03/25] x86: Refactor u-boot.rom build rules   Bin Meng
  • [U-Boot] [PATCH 03/25] x86: Refactor u-boot.rom build rules   Simon Glass
• [U-Boot] [PATCH 04/25] x86: Clean up asm-offsets   Bin Meng
  • [U-Boot] [PATCH 04/25] x86: Clean up asm-offsets   Simon Glass
• [U-Boot] [PATCH 05/25] x86: ich6-gpio: Make setup_pch_gpios() a weak function   Bin Meng
  • [U-Boot] [PATCH 05/25] x86: ich6-gpio: Make setup_pch_gpios() a weak function   Simon Glass
    • [U-Boot] [PATCH 05/25] x86: ich6-gpio: Make setup_pch_gpios() a weak function   Bin Meng
• [U-Boot] [PATCH 06/25] x86: Add Intel Crown Bay board dts file   Bin Meng
  • [U-Boot] [PATCH 06/25] x86: Add Intel Crown Bay board dts file   Simon Glass
• [U-Boot] [PATCH 07/25] x86: Add a simple superio driver for SMSC LPC47M   Bin Meng
  • [U-Boot] [PATCH 07/25] x86: Add a simple superio driver for SMSC LPC47M   Simon Glass
    • [U-Boot] [PATCH 07/25] x86: Add a simple superio driver for SMSC LPC47M   Bin Meng
• [U-Boot] [PATCH 08/25] x86: Add Intel Topcliff PCH device IDs   Bin Meng
  • [U-Boot] [PATCH 08/25] x86: Add Intel Topcliff PCH device IDs   Simon Glass
• [U-Boot] [PATCH 09/25] x86: ich-spi: Add Intel Tunnel Creek SPI controller support   Bin Meng
  • [U-Boot] [PATCH 09/25] x86: ich-spi: Add Intel Tunnel Creek SPI controller support   Simon Glass
• [U-Boot] [PATCH 10/25] x86: ich6-gpio: Add Intel Tunnel Creek GPIO support   Bin Meng
  • [U-Boot] [PATCH 10/25] x86: ich6-gpio: Add Intel Tunnel Creek GPIO support   Simon Glass
    • [U-Boot] [PATCH 10/25] x86: ich6-gpio: Add Intel Tunnel Creek GPIO support   Bin Meng
      • [U-Boot] [PATCH 10/25] x86: ich6-gpio: Add Intel Tunnel Creek GPIO support   Simon Glass
      • [U-Boot] [PATCH 10/25] x86: ich6-gpio: Add Intel Tunnel Creek GPIO support   Bin Meng
• [U-Boot] [PATCH 11/25] x86: Initial import from Intel FSP release for Queensbay platform   Bin Meng
  • [U-Boot] [PATCH 11/25] x86: Initial import from Intel FSP release for Queensbay platform   Simon Glass
    • [U-Boot] [PATCH 11/25] x86: Initial import from Intel FSP release for Queensbay platform   Bin Meng
• [U-Boot] [PATCH 12/25] x86: queensbay: Adapt FSP support codes   Bin Meng
  • [U-Boot] [PATCH 12/25] x86: queensbay: Adapt FSP support codes   Simon Glass
    • [U-Boot] [PATCH 12/25] x86: queensbay: Adapt FSP support codes   Bin Meng
• [U-Boot] [PATCH 13/25] x86: Add post failure codes for bist and car   Bin Meng
  • [U-Boot] [PATCH 13/25] x86: Add post failure codes for bist and car   Simon Glass
• [U-Boot] [PATCH 14/25] x86: Support Intel FSP initialization path in start.S   Bin Meng
  • [U-Boot] [PATCH 14/25] x86: Support Intel FSP initialization path in start.S   Simon Glass
    • [U-Boot] [PATCH 14/25] x86: Support Intel FSP initialization path in start.S   Bin Meng
• [U-Boot] [PATCH 15/25] x86: Add a simple command to show FSP HOB information   Bin Meng
  • [U-Boot] [PATCH 15/25] x86: Add a simple command to show FSP HOB information   Simon Glass
    • [U-Boot] [PATCH 15/25] x86: Add a simple command to show FSP HOB information   Bin Meng
  • [U-Boot] [PATCH 15/25] x86: Add a simple command to show FSP HOB information   Pavel Machek
    • [U-Boot] [PATCH 15/25] x86: Add a simple command to show FSP HOB information   Bin Meng
• [U-Boot] [PATCH 16/25] x86: Integrate Tunnel Creek processor microcode   Bin Meng
  • [U-Boot] [PATCH 16/25] x86: Integrate Tunnel Creek processor microcode   Simon Glass
    • [U-Boot] [PATCH 16/25] x86: Integrate Tunnel Creek processor microcode   Bin Meng
      • [U-Boot] [PATCH 16/25] x86: Integrate Tunnel Creek processor microcode   Simon Glass
      • [U-Boot] [PATCH 16/25] x86: Integrate Tunnel Creek processor microcode   Bin Meng
  • [U-Boot] [PATCH 16/25] x86: Integrate Tunnel Creek processor microcode   Pavel Machek
    • [U-Boot] [PATCH 16/25] x86: Integrate Tunnel Creek processor microcode   Bin Meng
      • [U-Boot] [PATCH 16/25] x86: Integrate Tunnel Creek processor microcode   Simon Glass
• [U-Boot] [PATCH 17/25] x86: Add basic support to queensbay platform and crownbay board   Bin Meng
  • [U-Boot] [PATCH 17/25] x86: Add basic support to queensbay platform and crownbay board   Simon Glass
    • [U-Boot] [PATCH 17/25] x86: Add basic support to queensbay platform and crownbay board   Bin Meng
      • [U-Boot] [PATCH 17/25] x86: Add basic support to queensbay platform and crownbay board   Simon Glass
• [U-Boot] [PATCH 18/25] x86: Add queensbay and crownbay Kconfig files   Bin Meng
  • [U-Boot] [PATCH 18/25] x86: Add queensbay and crownbay Kconfig files   Simon Glass
    • [U-Boot] [PATCH 18/25] x86: Add queensbay and crownbay Kconfig files   Bin Meng
• [U-Boot] [PATCH 19/25] x86: Add crownbay defconfig and config.h   Bin Meng
  • [U-Boot] [PATCH 19/25] x86: Add crownbay defconfig and config.h   Simon Glass
    • [U-Boot] [PATCH 19/25] x86: Add crownbay defconfig and config.h   Bin Meng
      • [U-Boot] [PATCH 19/25] x86: Add crownbay defconfig and config.h   Simon Glass
• [U-Boot] [PATCH 20/25] x86: Enable the queensbay cpu directory build   Bin Meng
  • [U-Boot] [PATCH 20/25] x86: Enable the queensbay cpu directory build   Simon Glass
• [U-Boot] [PATCH 21/25] x86: Include FSP and CMC binary in the u-boot.rom build rules   Bin Meng
  • [U-Boot] [PATCH 21/25] x86: Include FSP and CMC binary in the u-boot.rom build rules   Simon Glass
    • [U-Boot] [PATCH 21/25] x86: Include FSP and CMC binary in the u-boot.rom build rules   Bin Meng
• [U-Boot] [PATCH v2 1/1] ARM: kirkwood: mvebu_mmc: Speed up access time   Gérald Kerma
  • [U-Boot] [PATCH v3 0/6] ARM: kirkwood: mvebu_mmc: Speed up access time   Gérald Kerma
    • [U-Boot] [PATCH v3 0/6] ARM: kirkwood: mvebu_mmc: Speed up access time   Mario Schuknecht
      • [U-Boot] [PATCH v3 0/6] ARM: kirkwood: mvebu_mmc: Speed up access time   drEagle
• [U-Boot] [PATCH 22/25] x86: crownbay: Add SPI flash support   Bin Meng
  • [U-Boot] [PATCH 22/25] x86: crownbay: Add SPI flash support   Simon Glass
    • [U-Boot] [PATCH 22/25] x86: crownbay: Add SPI flash support   Bin Meng
• [U-Boot] [PATCH 23/25] x86: crownbay: Enable Intel E1000 NIC support   Bin Meng
  • [U-Boot] [PATCH 23/25] x86: crownbay: Enable Intel E1000 NIC support   Simon Glass
• [U-Boot] [PATCH 24/25] x86: crownbay: Add SDHCI support   Bin Meng
  • [U-Boot] [PATCH 24/25] x86: crownbay: Add SDHCI support   Simon Glass
    • [U-Boot] [PATCH 24/25] x86: crownbay: Add SDHCI support   Bin Meng
• [U-Boot] [PATCH 25/25] x86: Add a README.x86 for U-Boot on x86 support   Bin Meng
  • [U-Boot] [PATCH 25/25] x86: Add a README.x86 for U-Boot on x86 support   Simon Glass
    • [U-Boot] [PATCH 25/25] x86: Add a README.x86 for U-Boot on x86 support   Bin Meng
    • [U-Boot] [PATCH 25/25] x86: Add a README.x86 for U-Boot on x86 support   Bruce_Leonard at selinc.com
  • [U-Boot] [PATCH 25/25] x86: Add a README.x86 for U-Boot on x86 support   Pavel Machek
    • [U-Boot] [PATCH 25/25] x86: Add a README.x86 for U-Boot on x86 support   Bin Meng
    • [U-Boot] [PATCH 25/25] x86: Add a README.x86 for U-Boot on x86 support   Simon Glass
• [U-Boot] U-Boot on nyan-big via legacy boot   SimonH
  • [U-Boot] U-Boot on nyan-big via legacy boot   Simon Glass
    • [U-Boot] U-Boot on nyan-big via legacy boot   SimonH
      • [U-Boot] U-Boot on nyan-big via legacy boot   Simon Glass
• [U-Boot] [PATCH] doc/gitmail-rc: Update m68k alias   Tom Rini
  • [U-Boot] [PATCH] doc/gitmail-rc: Update m68k alias   Tom Rini
• [U-Boot] [PATCH v2 00/18] Support for eMMC partitioning and related fixes   Diego Santa Cruz
  • [U-Boot] [PATCH v2 01/18] mmc: show hardware partition sizes in mmcinfo output   Diego Santa Cruz
  • [U-Boot] [PATCH v2 05/18] mmc: incomplete test to switch to high-capacity group size definitions   Diego Santa Cruz
  • [U-Boot] [PATCH v2 06/18] mmc: computation of eMMC GP partition size was missing 512 KiB factor   Diego Santa Cruz
  • [U-Boot] [PATCH v2 07/18] mmc: read the size of eMMC enhanced user data area   Diego Santa Cruz
  • [U-Boot] [PATCH v2 08/18] mmc: display size and start of eMMC enhanced user data area in mmcinfo   Diego Santa Cruz
  • [U-Boot] [PATCH v2 09/18] mmc: fix erase_grp_size computation with high-capacity size definition   Diego Santa Cruz
  • [U-Boot] [PATCH v2 10/18] mmc: read the high capacity WP group size for eMMC   Diego Santa Cruz
  • [U-Boot] [PATCH v2 11/18] mmc: show the erase group size and HC WP group size in mmcinfo output   Diego Santa Cruz
  • [U-Boot] [PATCH v2 12/18] mmc: eMMC partitioning data is not effective till partitioning completed   Diego Santa Cruz
  • [U-Boot] [PATCH v2 13/18] mmc: the ext_csd data may be used during init even if reading failed   Diego Santa Cruz
  • [U-Boot] [PATCH v2 14/18] mmc: add API to do eMMC hardware partitioning   Diego Santa Cruz
  • [U-Boot] [PATCH v2 15/18] mmc: add mmc hwpartition sub-command to do eMMC hardware partitioning   Diego Santa Cruz
  • [U-Boot] [PATCH v2 16/18] mmc: extend the mmc hardware partitioning API with write reliability   Diego Santa Cruz
  • [U-Boot] [PATCH v2 17/18] mmc: extend the mmc hwpartition sub-command to change write reliability   Diego Santa Cruz
  • [U-Boot] [PATCH v2 18/18] mmc: extend mmcinfo output to show partition write reliability settings   Diego Santa Cruz
  • [U-Boot] [PATCH v2 00/18] Support for eMMC partitioning and related fixes   Pantelis Antoniou
    • [U-Boot] [PATCH v2 00/18] Support for eMMC partitioning and related fixes   Diego Santa Cruz
• [U-Boot] [PATCH v2 02/18] mmc: extend mmcinfo to show enhanced partition attribute   Diego Santa Cruz
• [U-Boot] [PATCH v2 03/18] mmc: make eMMC general purpose partition numbering match spec   Diego Santa Cruz
• [U-Boot] [PATCH v2 04/18] mmc: skip mmcinfo partition info processing for eMMC < 4.41   Diego Santa Cruz
• [U-Boot] [PATCH] omap5: Add netargs and netboot option   Franklin S Cooper Jr
• [U-Boot] [PATCH 00/18] Support for eMMC partitioning and related fixes   Joakim Tjernlund
  • [U-Boot] [PATCH 00/18] Support for eMMC partitioning and related fixes   Diego Santa Cruz
    • [U-Boot] [PATCH 00/18] Support for eMMC partitioning and related fixes   Joakim Tjernlund
      • [U-Boot] [PATCH 00/18] Support for eMMC partitioning and related fixes   Diego Santa Cruz
• [U-Boot] [PATCH v1] fastboot: handle flash write to GPT partition   Steve Rae
  • [U-Boot] [PATCH v1] fastboot: handle flash write to GPT partition   Marek Vasut
    • [U-Boot] [PATCH v1] fastboot: handle flash write to GPT partition   Lukasz Majewski
  • [U-Boot] [PATCH v1] fastboot: handle flash write to GPT partition   Lukasz Majewski
    • [U-Boot] [PATCH v1] fastboot: handle flash write to GPT partition   Steve Rae
      • [U-Boot] [PATCH v1] fastboot: handle flash write to GPT partition   Lukasz Majewski
• [U-Boot] Pull request: u-boot-sh/master   Nobuhiro Iwamatsu
  • [U-Boot] Pull request: u-boot-sh/master   Tom Rini
• [U-Boot] [PATCH] flash: do not fail even if flash_size is zero   Masahiro Yamada
  • [U-Boot] [PATCH] flash: do not fail even if flash_size is zero   Stefan Roese
    • [U-Boot] [PATCH] flash: do not fail even if flash_size is zero   Masahiro Yamada
      • [U-Boot] [PATCH] flash: do not fail even if flash_size is zero   Stefan Roese
  • [U-Boot] [PATCH] flash: do not fail even if flash_size is zero   Masahiro YAMADA
• [U-Boot] U-Boot crashes and keeps rebooting when upgraded DDR to 1GB from 512 MB   KK_82
• [U-Boot] [PATCH v4 0/11] dm: Add I2C support and convert sandbox, tegra   Simon Glass
  • [U-Boot] [PATCH v4 01/11] dm: i2c: Add a uclass for I2C   Simon Glass
    • [U-Boot] [PATCH v4 01/11] dm: i2c: Add a uclass for I2C   Masahiro Yamada
      • [U-Boot] [PATCH v4 01/11] dm: i2c: Add a uclass for I2C   Simon Glass
      • [U-Boot] [PATCH v4 01/11] dm: i2c: Add a uclass for I2C   Masahiro Yamada
  • [U-Boot] [PATCH v4 02/11] dm: i2c: Implement driver model support in the i2c command   Simon Glass
  • [U-Boot] [PATCH v4 03/11] dm: i2c: Add I2C emulation driver for sandbox   Simon Glass
  • [U-Boot] [PATCH v4 04/11] dm: i2c: Add a sandbox I2C driver   Simon Glass
  • [U-Boot] [PATCH v4 05/11] dm: i2c: Add an I2C EEPROM simulator   Simon Glass
  • [U-Boot] [PATCH v4 06/11] dm: i2c: config: Enable I2C for sandbox using driver model   Simon Glass
  • [U-Boot] [PATCH v4 07/11] dm: i2c: dts: Add an I2C bus for sandbox   Simon Glass
  • [U-Boot] [PATCH v4 08/11] dm: Add a simple EEPROM driver   Simon Glass
  • [U-Boot] [PATCH v4 09/11] dm: i2c: Add tests for I2C   Simon Glass
  • [U-Boot] [PATCH v4 10/11] dm: device: Add newline to debug() messages   Simon Glass
  • [U-Boot] [PATCH v4 11/11] dm: i2c: tegra: Convert to driver model   Simon Glass
    • [U-Boot] [PATCH v4 11/11] dm: i2c: tegra: Convert to driver model   Masahiro Yamada
      • [U-Boot] [PATCH v4 11/11] dm: i2c: tegra: Convert to driver model   Simon Glass
      • [U-Boot] [PATCH v4 11/11] dm: i2c: tegra: Convert to driver model   Masahiro Yamada
      • [U-Boot] [PATCH v4 11/11] dm: i2c: tegra: Convert to driver model   Simon Glass
• [U-Boot] [PATCH] imx: complete the definition of the I2C_PADS macros   Pierre Aubert
• [U-Boot] [PATCH] imx: fix IOMUX_PADS and SETUP_IOMUX_PAD macros definitions.   Pierre Aubert
• [U-Boot] [PATCH 0/5] peach_pi: Add support for FIMD and DP   Ajay Kumar
  • [U-Boot] [PATCH 1/5] Exynos5800: The Peach-Pi board does not have a Parade video bridge   Ajay Kumar
  • [U-Boot] [PATCH 2/5] arm: exynos: add display clocks for Exynos5800   Ajay Kumar
    • [U-Boot] [PATCH 2/5] arm: exynos: add display clocks for Exynos5800   Minkyu Kang
      • [U-Boot] [PATCH 2/5] arm: exynos: add display clocks for Exynos5800   Ajay kumar
      • [U-Boot] [PATCH 2/5] arm: exynos: add display clocks for Exynos5800   Ajay kumar
      • [U-Boot] [PATCH 2/5] arm: exynos: add display clocks for Exynos5800   Simon Glass
  • [U-Boot] [PATCH 3/5] Exynos5: Fix rpll_sdiv to support both peach-pit and peach-pi panels   Ajay Kumar
  • [U-Boot] [PATCH 4/5] exynos5420: Add LCD and LED powerup settings for peach-pi   Ajay Kumar
    • [U-Boot] [PATCH 4/5] exynos5420: Add LCD and LED powerup settings for peach-pi   Sjoerd Simons
      • [U-Boot] [PATCH 4/5] exynos5420: Add LCD and LED powerup settings for peach-pi   Simon Glass
      • [U-Boot] [PATCH 4/5] exynos5420: Add LCD and LED powerup settings for peach-pi   Ajay kumar
      • [U-Boot] [PATCH 4/5] exynos5420: Add LCD and LED powerup settings for peach-pi   Simon Glass
      • [U-Boot] [PATCH 4/5] exynos5420: Add LCD and LED powerup settings for peach-pi   Simon Glass
  • [U-Boot] [PATCH 5/5] peach_pi: dts: Add lcd poweron delay   Ajay Kumar
• [U-Boot] [U-Boot, 01/11] arm: omap5: don't enable misc_init_r by default   Tom Rini
• [U-Boot] [U-Boot, 02/11] arm: omap5: tps659038: rename regulator defines   Tom Rini
• [U-Boot] [U-Boot, 03/11] arm: dra7xx: prcm: add missing registers   Tom Rini
• [U-Boot] [U-Boot, 04/11] usb: phy: omap_usb_phy: fix build breakage   Tom Rini
• [U-Boot] [U-Boot, 05/11] arm: omap-common: emif: allow to map memory without interleaving   Tom Rini
• [U-Boot] [U-Boot, 06/11] configs: omap5_common : Boot rootfs from sd card by default   Tom Rini
• [U-Boot] [U-Boot,07/11] arm: omap5: make hw_init_data weak   Tom Rini
• [U-Boot] [U-Boot, 08/11] arm: omap5: sdram: mark emif_get_ext_phy_ctrl_const_regs __weak   Tom Rini
• [U-Boot] [U-Boot, 09/11] arm: omap_common: expose tps659038 and dra7xx_dplls   Tom Rini
• [U-Boot] [U-Boot, 10/11] arm: omap: add support for am57xx devices   Tom Rini
• [U-Boot] [U-Boot, v4, 1/3] mmc: Board-specific MMC power initializations   Tom Rini
• [U-Boot] [U-Boot, v4, 2/3] twl4030: device-index-specific MMC power initializations, common ramp-up delay   Tom Rini
• [U-Boot] [U-Boot, v4, 3/3] omap_hsmmc: Board-specific TWL4030 MMC power initializations   Tom Rini
• [U-Boot] ARM: OMAP5: DRA7xx: Enable 8-bit eMMC access on the dra7xx_evm   Tom Rini
• [U-Boot] ARM: OMAP5: DRA7xx: Fix misleading comments in mux_data.h   Tom Rini
• [U-Boot] Fix for ns16550 driver hanging on OMAP4   Tom Rini
• [U-Boot] [U-Boot, v3, 11/11] beagle_x15: add board support for Beagle x15   Tom Rini
• [U-Boot] arm: am33xx: Handle NAND+I2C boot-device the same way as NAND   Tom Rini
• [U-Boot] [U-Boot, v2] mtd: nand: omap_gpmc: Always use ready/busy pin   Tom Rini
• [U-Boot] [U-Boot, v1, 1/3] arm, am335x, siemens: fix factoryset interpretation   Tom Rini
• [U-Boot] [U-Boot, v1, 2/3] arm, am335x, siemens: read COMP/ver from factoryset   Tom Rini
• [U-Boot] [U-Boot, v1, 3/3] arm, am335x: siemens boards add FIT support   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
  • [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH 0/9] ARM: UniPhier: a collection of nice cleanups of board/SoC support code   Masahiro Yamada
  • [U-Boot] [PATCH 3/9] ARM: UniPhier: move CONFIG_UNIPHIER_SMP to Kconfig   Masahiro Yamada
  • [U-Boot] [PATCH 0/9] ARM: UniPhier: a collection of nice cleanups of board/SoC support code   Masahiro YAMADA
• [U-Boot] [PATCH 1/9] ARM: UniPhier: disable autostart by default   Masahiro Yamada
• [U-Boot] [PATCH 2/9] ARM: UniPhier: use boot_is_swapped() macro for readability   Masahiro Yamada
• [U-Boot] [PATCH 4/9] ARM: UniPhier: move support card select to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 5/9] ARM: UniPhier: merge UniPhier config headers into a single file   Masahiro Yamada
• [U-Boot] [PATCH 6/9] ARM: UniPhier: add more device nodes to device tree   Masahiro Yamada
• [U-Boot] [PATCH 7/9] ARM: UniPhier: add device tree sources for PH1-sLD3   Masahiro Yamada
• [U-Boot] [PATCH 8/9] ARM: UniPhier: extend register area of init page table for PH1-sLD3   Masahiro Yamada
• [U-Boot] [PATCH 9/9] ARM: UniPhier: detect the number of flash banks at run-time   Masahiro Yamada
• [U-Boot] [PATCH v5 0/11] dm: Add I2C support and convert sandbox, tegra   Simon Glass
  • [U-Boot] [PATCH v5 01/11] dm: i2c: Add a uclass for I2C   Simon Glass
    • [U-Boot] [PATCH v5 01/11] dm: i2c: Add a uclass for I2C   Simon Glass
      • [U-Boot] [PATCH v5 01/11] dm: i2c: Add a uclass for I2C   Masahiro Yamada
      • [U-Boot] [PATCH v5 01/11] dm: i2c: Add a uclass for I2C   Heiko Schocher
      • [U-Boot] [PATCH v5 01/11] dm: i2c: Add a uclass for I2C   Simon Glass
    • [U-Boot] [PATCH v5 01/11] dm: i2c: Add a uclass for I2C   Masahiro Yamada
  • [U-Boot] [PATCH v5 02/11] dm: i2c: Implement driver model support in the i2c command   Simon Glass
    • [U-Boot] [PATCH v5 02/11] dm: i2c: Implement driver model support in the i2c command   Masahiro Yamada
  • [U-Boot] [PATCH v5 03/11] dm: i2c: Add I2C emulation driver for sandbox   Simon Glass
    • [U-Boot] [PATCH v5 03/11] dm: i2c: Add I2C emulation driver for sandbox   Masahiro Yamada
  • [U-Boot] [PATCH v5 04/11] dm: i2c: Add a sandbox I2C driver   Simon Glass
    • [U-Boot] [PATCH v5 04/11] dm: i2c: Add a sandbox I2C driver   Masahiro Yamada
      • [U-Boot] [PATCH v5 04/11] dm: i2c: Add a sandbox I2C driver   Simon Glass
    • [U-Boot] [PATCH v5 04/11] dm: i2c: Add a sandbox I2C driver   Masahiro Yamada
  • [U-Boot] [PATCH v5 05/11] dm: i2c: Add an I2C EEPROM simulator   Simon Glass
    • [U-Boot] [PATCH v5 05/11] dm: i2c: Add an I2C EEPROM simulator   Masahiro Yamada
      • [U-Boot] [PATCH v5 05/11] dm: i2c: Add an I2C EEPROM simulator   Simon Glass
  • [U-Boot] [PATCH v5 06/11] dm: i2c: config: Enable I2C for sandbox using driver model   Simon Glass
  • [U-Boot] [PATCH v5 07/11] dm: i2c: dts: Add an I2C bus for sandbox   Simon Glass
    • [U-Boot] [PATCH v5 07/11] dm: i2c: dts: Add an I2C bus for sandbox   Masahiro Yamada
  • [U-Boot] [PATCH v5 08/11] dm: Add a simple EEPROM driver   Simon Glass
    • [U-Boot] [PATCH v5 08/11] dm: Add a simple EEPROM driver   Masahiro Yamada
  • [U-Boot] [PATCH v5 09/11] dm: i2c: Add tests for I2C   Simon Glass
  • [U-Boot] [PATCH v5 10/11] dm: device: Add newline to debug() messages   Simon Glass
  • [U-Boot] [PATCH v5 11/11] dm: i2c: tegra: Convert to driver model   Simon Glass
• [U-Boot] [PATCH v3 1/2] arm: marvell: add LIBFDT support to sheevaplug   drEagle
• [U-Boot] Please pull u-boot-mpc85xx master   York Sun
  • [U-Boot] Please pull u-boot-mpc85xx master   Tom Rini
• [U-Boot] [PATCH] Freescale t104x: Do not exclude SGMII   York Sun
• [U-Boot] [PATCH] powerpc/t2080: add serdes2 protocol 0x2e   York Sun
• [U-Boot] [PATCH 1/2][v2] powerpc/mpc85xx:Put errata number for T104x NAND boot issue   York Sun
• [U-Boot] [PATCH 2/2][v2] board/t104xrdb: Conditional workaround of errata A-008044   York Sun
• [U-Boot] [PATCH v4] powerpc/mpc85xx: modify erratum A007186   York Sun
• [U-Boot] [PATCH v2] powerpc/t208xqds: VID support   York Sun
• [U-Boot] [PATCH] board/freescale: use generic board architecture for p1025-twr   York Sun
• [U-Boot] [PATCH] powerpc/P5040DS: enable SATA support   York Sun
• [U-Boot] [PATCH] board/freescale: use generic board architecture for p1010rdb   York Sun
• [U-Boot] [PATCH] km/km82xx: remove CONFIG_SYS_RAMBOOT   York Sun
• [U-Boot] [PATCH] powerpc, muas3001: remove CONFIG_SYS_RAMBOOT   York Sun
• [U-Boot] [PATCH] mpc85xx/p1022ds: convert to generic board   York Sun
• [U-Boot] [PATCH] powerpc/p1023rdb: Enable configs to use generic board code   York Sun
• [U-Boot] [PATCH] powerpc/c29xpcie: Enable configs to use generic board code   York Sun
• [U-Boot] [PATCH v7] net/phy: Add support for CS4315/CS4340 PHY   York Sun
  • [U-Boot] [PATCH v7] net/phy: Add support for CS4315/CS4340 PHY   Joe Hershberger
    • [U-Boot] [PATCH v7] net/phy: Add support for CS4315/CS4340 PHY   York Sun
• [U-Boot] [PATCH v7] net/phy: Add support for CS4315/CS4340 PHY   York Sun
• [U-Boot] [PATCH] powerpc/t104x: Convert to use generic board code   York Sun
• [U-Boot] [PATCH] powerpc/b4860: Enable law creation of MAPLE   York Sun
• [U-Boot] [PATCH 2/3] B4860QDS: SGMII related updates   York Sun
• [U-Boot] [PATCH 3/3] B4860: Add alternate LC VCO serdes protocols support in board file   York Sun
• [U-Boot] [PATCH 1/3] 85xx/b4860: Add alternate serdes protocols for B4860/B4420   York Sun
• [U-Boot] [PATCH 1/5] powerpc/b4860qds: add xfi support   York Sun
• [U-Boot] [PATCH 2/5] powerpc/b4860qds: dtb fixup for xfi   York Sun
• [U-Boot] [PATCH 3/5] B4860QDS: Enable SFP or AMC on basis of hwconfig string   York Sun
• [U-Boot] [PATCH 4/5] powerpc/b4860qds: add workaround for XFI   York Sun
• [U-Boot] [PATCH 5/5] B4860QDS: Enable enet port as per fsl_b4860_serdes2 string in hwconfig   York Sun
• [U-Boot] [PATCH v2] powerpc/t2080: updating rcw for silicon v1.1   York Sun
• [U-Boot] [PATCH] powerpc/mpc85xx: Update LIODN entries for T1040   York Sun
• [U-Boot] [PATCH] powerpc/mpc85xx: use correct dma compatible for several SoCs   York Sun
• [U-Boot] [PATCH] powerpc/t4240rdb: enable eSDHC 3.3V support   York Sun
• [U-Boot] [PATCH] powerpc/hydra: Update MDIO mux fixups   York Sun
• [U-Boot] [PATCH] powerpc/hydra: fix judging condition of RGMII selection   York Sun
• [U-Boot] [PATCH 2/9 v2] powerpc/mpc85xx: Add T1024/T1023 SoC support   York Sun
• [U-Boot] [PATCH 3/9 v2] powerpc/t1024qds: Add T1024 QDS board support   York Sun
• [U-Boot] [PATCH 4/9 v2] powerpc/t1024rdb: Add T1024 RDB board support   York Sun
• [U-Boot] [PATCH 5/9 v2] net/fman: update 10GEC to fit new SoC   York Sun
• [U-Boot] [PATCH 6/9 v2] board/t1024qds: update pin multiplexing   York Sun
• [U-Boot] [PATCH 7/9 v2] net/phy: enable serdes auto-negotiation for vsc8514 phy   York Sun
• [U-Boot] [PATCH 8/9 v2] t1024qds: increase IO drive strength   York Sun
• [U-Boot] [PATCH 9/9 v2] board/t1024qds: add retimer support on t1024qds   York Sun
• [U-Boot] [PATCH 0/2 v3] No need for parade bridge on peach-pi   Sjoerd Simons
  • [U-Boot] [PATCH 0/2 v3] No need for parade bridge on peach-pi   Minkyu Kang
• [U-Boot] [PATCH 1/2 v3] Exynos5800: The Peach-Pi board does not have a Parade video bridge   Sjoerd Simons
• [U-Boot] [PATCH 2/2 v3] exynos5420: fix compilation without parade video   Sjoerd Simons
• [U-Boot] [PATCH] deepsleep/qe: add qe deepsleep support   York Sun
  • [U-Boot] [PATCH] deepsleep/qe: add qe deepsleep support   York Sun
  • [U-Boot] [PATCH] deepsleep/qe: add qe deepsleep support   qiang.zhao at freescale.com
• [U-Boot] [PATCH] arm: ls102xa: Add QSPI boot support for LS1021AQDS/TWR board   York Sun
• [U-Boot] [PATCH 25/25] x86: Add a README.x86 for U-Boot on x86 support   Simon Glass
  • [U-Boot] [PATCH 25/25] x86: Add a README.x86 for U-Boot on x86 support   Bruce_Leonard at selinc.com
    • [U-Boot] [PATCH 25/25] x86: Add a README.x86 for U-Boot on x86 support   Bin Meng
• [U-Boot] [PATCH] Exynos: Move down common USB configuration   Sjoerd Simons
  • [U-Boot] [PATCH] Exynos: Move down common USB configuration   Simon Glass
  • [U-Boot] [PATCH] Exynos: Move down common USB configuration   Minkyu Kang
• [U-Boot] [PATCH v2] odroid-XU3: Add entry for DTS EHCI GPIO   Sjoerd Simons
  • [U-Boot] [PATCH v2] odroid-XU3: Add entry for DTS EHCI GPIO   Hyungwon Hwang
    • [U-Boot] [PATCH v2] odroid-XU3: Add entry for DTS EHCI GPIO   Suriyan Ramasami
      • [U-Boot] [PATCH v2] odroid-XU3: Add entry for DTS EHCI GPIO   Hyungwon Hwang
      • [U-Boot] [PATCH v2] odroid-XU3: Add entry for DTS EHCI GPIO   Sjoerd Simons
      • [U-Boot] [PATCH v2] odroid-XU3: Add entry for DTS EHCI GPIO   Kevin Hilman
  • [U-Boot] [PATCH v2] odroid-XU3: Add entry for DTS EHCI GPIO   Minkyu Kang
• [U-Boot] [PATCH] ARM: exynos5420: Leave VBUS GPIO configuration up to common code   Sjoerd Simons
  • [U-Boot] [PATCH] ARM: exynos5420: Leave VBUS GPIO configuration up to common code   Simon Glass
  • [U-Boot] [PATCH] ARM: exynos5420: Leave VBUS GPIO configuration up to common code   Minkyu Kang
• [U-Boot] [PATCH v1] bcm281xx: add support for "USB OTG clock"   Steve Rae
  • [U-Boot] [PATCH v1] bcm281xx: add support for "USB OTG clock"   Felipe Balbi
• [U-Boot] [PATCH] ARM: rpi: only set usbethaddr on relevant systems   Stephen Warren
  • [U-Boot] ARM: rpi: only set usbethaddr on relevant systems   Tom Rini
• [U-Boot] [PATCH 2/2] socfpga: correctly increment freeze_controller_base address   Marek Vasut
• [U-Boot] [PATCH 1/4 v4] spi: Add Cadence QSPI DM driver used by SoCFPGA   Marek Vasut
  • [U-Boot] [PATCH 1/4 v4] spi: Add Cadence QSPI DM driver used by SoCFPGA   Stefan Roese
• [U-Boot] [PATCH] arm: socfpga: Add DT support for SoCFPGA   Marek Vasut
  • [U-Boot] [PATCH] arm: socfpga: Add DT support for SoCFPGA   Stefan Roese
    • [U-Boot] [PATCH] arm: socfpga: Add DT support for SoCFPGA   Stefan Roese
      • [U-Boot] [PATCH] arm: socfpga: Add DT support for SoCFPGA   Marek Vasut
• [U-Boot] [PATCH v4 9/9] arm: ls102xa: Add NAND boot support for LS1021AQDS board   Alison Wang
  • [U-Boot] [PATCH v4 9/9] arm: ls102xa: Add NAND boot support for LS1021AQDS board   York Sun
    • [U-Boot] [PATCH v4 9/9] arm: ls102xa: Add NAND boot support for LS1021AQDS board   chenhui.zhao at freescale.com
• [U-Boot] [PATCH v2] bcm281xx: add support for "USB OTG clock"   Steve Rae
  • [U-Boot] [PATCH v2] bcm281xx: add support for "USB OTG clock"   Felipe Balbi
  • [U-Boot] [PATCH v2] bcm281xx: add support for "USB OTG clock"   Michael Trimarchi
    • [U-Boot] [PATCH v2] bcm281xx: add support for "USB OTG clock"   Steve Rae
• [U-Boot] [PATCH] gpio: intel_ich6: Set correct gpio output value in ich6_gpio_direction_output()   Axel Lin
  • [U-Boot] [PATCH] gpio: intel_ich6: Set correct gpio output value in ich6_gpio_direction_output()   Simon Glass
    • [U-Boot] [PATCH] gpio: intel_ich6: Set correct gpio output value in ich6_gpio_direction_output()   Simon Glass
• [U-Boot] [PATCH] ARM: UniPhier: remove Denali NAND controller fixup code   Masahiro YAMADA
• [U-Boot] Pull request: u-boot-uniphier   Masahiro YAMADA
• [U-Boot] [PATCH v1] mx51_na04: add support for the Hercules eCAFE laptop   Emil Renner Berthing
  • [U-Boot] [PATCH v1] mx51_na04: add support for the Hercules eCAFE laptop   Stefano Babic
• [U-Boot] [PATCH 1/2] sun6i: Update Colombus defconfig settings   Hans de Goede
  • [U-Boot] [PATCH 2/2] sunxi: mmc: Properly setup mod-clk and clock sampling phases   Hans de Goede
    • [U-Boot] [PATCH 2/2] sunxi: mmc: Properly setup mod-clk and clock sampling phases   Ian Campbell
  • [U-Boot] [PATCH 1/2] sun6i: Update Colombus defconfig settings   Ian Campbell
    • [U-Boot] [PATCH 1/2] sun6i: Update Colombus defconfig settings   Ian Campbell
      • [U-Boot] [PATCH 1/2] sun6i: Update Colombus defconfig settings   Hans de Goede
      • [U-Boot] [PATCH 1/2] sun6i: Update Colombus defconfig settings   Ian Campbell
      • [U-Boot] [PATCH 1/2] sun6i: Update Colombus defconfig settings   Hans de Goede
• [U-Boot] A23 u-boot with SPL / dram init available in my personal git repo   Hans de Goede
  • [U-Boot] A23 u-boot with SPL / dram init available in my personal git repo   mike.valk at gmail.com
  • [U-Boot] A23 u-boot with SPL / dram init available in my personal git repo   Chen-Yu Tsai
    • [U-Boot] A23 u-boot with SPL / dram init available in my personal git repo   Hans de Goede
      • [U-Boot] A23 u-boot with SPL / dram init available in my personal git repo   Chen-Yu Tsai
      • [U-Boot] A23 u-boot with SPL / dram init available in my personal git repo   Hans de Goede
      • [U-Boot] A23 u-boot with SPL / dram init available in my personal git repo   Chen-Yu Tsai
      • [U-Boot] A23 u-boot with SPL / dram init available in my personal git repo   Hans de Goede
      • [U-Boot] A23 u-boot with SPL / dram init available in my personal git repo   Chen-Yu Tsai
      • [U-Boot] A23 u-boot with SPL / dram init available in my personal git repo   Hans de Goede
      • [U-Boot] A23 u-boot with SPL / dram init available in my personal git repo   Ricky Xian
      • [U-Boot] [linux-sunxi] Re: A23 u-boot with SPL / dram init available in my personal git repo   Siarhei Siamashka
      • [U-Boot] [linux-sunxi] Re: A23 u-boot with SPL / dram init available in my personal git repo   Ricky Xian
      • [U-Boot] A23 u-boot with SPL / dram init available in my personal git repo   Hans de Goede
  • [U-Boot] A23 u-boot with SPL / dram init available in my personal git repo   Maxime Ripard
• [U-Boot] [PATCH 0/13] ARM: atmel: enable spl for sama5d4 related boards   Bo Shen
  • [U-Boot] [PATCH 01/13] ARM: atmel: clock: make it possible to configure HMX32   Bo Shen
  • [U-Boot] [PATCH 02/13] ARM: atmel: sama5: add bus matrix header file   Bo Shen
  • [U-Boot] [PATCH 03/13] ARM: atmel: sama5: add sfr register header file   Bo Shen
  • [U-Boot] [PATCH 04/13] ARM: atmel: spl: add weak bus matrix init function   Bo Shen
  • [U-Boot] [PATCH 05/13] ARM: atmel: spl: add saic to aic redirect function   Bo Shen
  • [U-Boot] [PATCH 06/13] ARM: atmel: spl: can not disable osc for sama5d4   Bo Shen
  • [U-Boot] [PATCH 07/13] ARM: atmel: sama5d4: add matrix1 base addr definition   Bo Shen
  • [U-Boot] [PATCH 08/13] ARM: atmel: sama5d4: add bus matrix init function   Bo Shen
  • [U-Boot] [PATCH 09/13] ARM: atmel: sama5d4: add interrupt redirec function   Bo Shen
  • [U-Boot] [PATCH 10/13] ARM: atmel: sama5d4: can access DDR in interleave mode   Bo Shen
  • [U-Boot] [PATCH 11/13] ARM: atmel: sama5d4: build related file when enable SPL   Bo Shen
  • [U-Boot] [PATCH 12/13] ARM: atmel: sama5d4ek: enable SPL support   Bo Shen
    • [U-Boot] [PATCH 12/13] ARM: atmel: sama5d4ek: enable SPL support   Robert Nelson
  • [U-Boot] [PATCH 13/13] ARM: atmel: sama5d4_xplained: enable spl support   Bo Shen
    • [U-Boot] [PATCH 13/13] ARM: atmel: sama5d4_xplained: enable spl support   Robert Nelson
      • [U-Boot] [PATCH 13/13] ARM: atmel: sama5d4_xplained: enable spl support   Bo Shen
      • [U-Boot] [PATCH 13/13] ARM: atmel: sama5d4_xplained: enable spl support   Bo Shen
      • [U-Boot] [PATCH 13/13] ARM: atmel: sama5d4_xplained: enable spl support   Robert Nelson
• [U-Boot] [i2c] Pull request   Heiko Schocher
  • [U-Boot] [i2c] Pull request   Tom Rini
• [U-Boot] [PATCH v4] Export redesign   Martin Dorwig
  • [U-Boot] [PATCH v4] Export redesign   Simon Glass
• [U-Boot] [PATCH] fix: tools: kwbimage.c: Initialize headersz to suppress warning   Lukasz Majewski
• [U-Boot] Implementing the uBoot SYSCALL interface for MIPS   Matthew Fortune
• [U-Boot] [PATCH RFC] arm: mx6: Add CCGR0 configuration to default DCD (spl_sd.cfg)   Stefan Roese
  • [U-Boot] [PATCH RFC] arm: mx6: Add CCGR0 configuration to default DCD (spl_sd.cfg)   Fabio Estevam
    • [U-Boot] [PATCH RFC] arm: mx6: Add CCGR0 configuration to default DCD (spl_sd.cfg)   Stefan Roese
      • [U-Boot] [PATCH RFC] arm: mx6: Add CCGR0 configuration to default DCD (spl_sd.cfg)   Fabio Estevam
      • [U-Boot] [PATCH RFC] arm: mx6: Add CCGR0 configuration to default DCD (spl_sd.cfg)   Stefan Roese
      • [U-Boot] [PATCH RFC] arm: mx6: Add CCGR0 configuration to default DCD (spl_sd.cfg)   Fabio Estevam
      • [U-Boot] [PATCH RFC] arm: mx6: Add CCGR0 configuration to default DCD (spl_sd.cfg)   Stefan Roese
      • [U-Boot] [PATCH RFC] arm: mx6: Add CCGR0 configuration to default DCD (spl_sd.cfg)   Fabio Estevam
      • [U-Boot] [PATCH RFC] arm: mx6: Add CCGR0 configuration to default DCD (spl_sd.cfg)   Stefan Roese
      • [U-Boot] [PATCH RFC] arm: mx6: Add CCGR0 configuration to default DCD (spl_sd.cfg)   Fabio Estevam
• [U-Boot] USB Host not enumerating properly on AM335x-based board   Maxime Ripard
• [U-Boot] [PATCH v2] exynos5250/arndale: Enable SATA/AHCI support.   Ian Campbell
  • [U-Boot] [PATCH v2] exynos5250/arndale: Enable SATA/AHCI support.   Simon Glass
• [U-Boot] [PATCH V3 00/12] cleanup and refactor lcd.c   Nikita Kiryanov
  • [U-Boot] [PATCH V3 02/12] lcd: cleanup lcd_drawchars   Nikita Kiryanov
  • [U-Boot] [PATCH V3 03/12] mpc8xx_lcd: get rid of CONFIG_EDT32F10   Nikita Kiryanov
  • [U-Boot] [PATCH V3 06/12] lcd: replace CONSOLE_(ROWS|COLS) with variables   Nikita Kiryanov
  • [U-Boot] [PATCH V3 07/12] lcd: expand console api   Nikita Kiryanov
  • [U-Boot] [PATCH V3 08/12] lcd: get rid of COLOR_MASK   Nikita Kiryanov
  • [U-Boot] [PATCH V3 09/12] lcd: introduce getters for bg/fg color   Nikita Kiryanov
    • [U-Boot] [PATCH V3 09/12] lcd: introduce getters for bg/fg color   Simon Glass
  • [U-Boot] [PATCH V3 10/12] lcd: make lcd_drawchars() independant of lcd_base   Nikita Kiryanov
  • [U-Boot] [PATCH V3 11/12] lcd: refactor lcd console stuff into its own file   Nikita Kiryanov
  • [U-Boot] [PATCH V3 12/12] lcd_console: remove unused defines   Nikita Kiryanov
  • [U-Boot] [PATCH V3 00/12] cleanup and refactor lcd.c   Nikita Kiryanov
    • [U-Boot] [PATCH V3 00/12] cleanup and refactor lcd.c   Simon Glass
• [U-Boot] [PATCH V3 01/12] lcd: remove CONFIG_SYS_INVERT_COLORS   Nikita Kiryanov
• [U-Boot] [PATCH V3 04/12] lcd: remove LCD_MONOCHROME   Nikita Kiryanov
• [U-Boot] [PATCH V3 05/12] lcd: rename console_(row|col)   Nikita Kiryanov
• [U-Boot] [PATCH v2 6/9] ARM: UniPhier: add more device nodes to device tree   Masahiro Yamada
  • [U-Boot] [PATCH v2 7/9] ARM: UniPhier: add device tree sources for PH1-sLD3   Masahiro Yamada
    • [U-Boot] [PATCH v2 7/9] ARM: UniPhier: add device tree sources for PH1-sLD3   Masahiro YAMADA
  • [U-Boot] [PATCH v2 6/9] ARM: UniPhier: add more device nodes to device tree   Masahiro YAMADA
• [U-Boot] Pull request: u-boot-uniphier (updated!)   Masahiro YAMADA
  • [U-Boot] Pull request: u-boot-uniphier (updated!)   Tom Rini
• [U-Boot] [PATCH] Add support for Seagate BlackArmor NAS220   Evgeni Dobrev
• [U-Boot] [PATCH v2 03/12] spi: sf: Support byte program for sst spi flash   Jagan Teki
  • [U-Boot] [PATCH v2 03/12] spi: sf: Support byte program for sst spi flash   Bin Meng
• [U-Boot] Link error for arm targets   York Sun
  • [U-Boot] Link error for arm targets   Scott Wood
    • [U-Boot] Link error for arm targets   York Sun
• [U-Boot] [PATCH v4] mpc85xx: inhibit bman portals by default   Jeffrey Ladouceur
• [U-Boot] [PATCH V5] mpc85xx: inhibit qman and bman portals by default   Jeffrey Ladouceur
  • [U-Boot] [PATCH V5] mpc85xx: inhibit qman and bman portals by default   York Sun
• [U-Boot] [U-Boot, 1/2] MMC SD fs boot partition config coding style and proper description   Tom Rini
• [U-Boot] [U-Boot, 2/2] spl: MMC U-Boot image load from raw partition   Tom Rini
• [U-Boot] Fix console functions for U-Boot API   Tom Rini
• [U-Boot] get_maintainer.pl: fix source tree detection   Tom Rini
• [U-Boot] net: bootp: as CONFIG_BOOTP_SERVERIP is defined, keep bootfile not changed   Tom Rini
• [U-Boot] MAINTAINERS: add me as a maintainer of UBI   Tom Rini
• [U-Boot] spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS, if available   Tom Rini
• [U-Boot] [U-Boot,U-Boot] ARM: rpi_b: detect board revision   Tom Rini
• [U-Boot] git-mailrc: fix mips alias   Tom Rini
• [U-Boot] git-mailrc: fix mips alias   Tom Rini
• [U-Boot] [U-Boot,1/2] ARM: rpi: rename rpi_b to rpi   Tom Rini
• [U-Boot] [U-Boot,2/2] ARM: rpi: support an environment   Tom Rini
• [U-Boot] [U-Boot,v2] cmd_fuse: return CMD_RET_FAILURE on error   Tom Rini
• [U-Boot] [U-Boot, v2] powerpc: mpc8xx: remove hermes board support   Tom Rini
• [U-Boot] [U-Boot, 1/3] powerpc: lwmon5: remove redundant CONFIG_SPL_* defines   Tom Rini
• [U-Boot] [U-Boot, 2/3] powerpc: a3m071: remove redundant CONFIG_SPL_* defines   Tom Rini
• [U-Boot] [U-Boot, 3/3] imx6: remove redudant CONFIG_SPL_START_S_PATH define   Tom Rini
• [U-Boot] [U-Boot, v2, 1/5] serial: pl01x: pass pl01x_type to set baudrate   Tom Rini
• [U-Boot] [U-Boot, v2, 2/5] serial: pl01x: fix pl011 baud rate configuration   Tom Rini
• [U-Boot] [U-Boot, v2, 3/5] serial: pl01x: move all line control at same place   Tom Rini
• [U-Boot] [U-Boot, v2, 4/5] serial: pl01x: disable as per type of pl01x   Tom Rini
• [U-Boot] [U-Boot, v2, 5/5] serial: pl01x: avoid pl01x type check two times   Tom Rini
• [U-Boot] [U-Boot, v3] arm: bcm: update Cygnus and NSP board families   Tom Rini
• [U-Boot] [U-Boot,v2] Kbuild: introduce Makefile in arch/$ARCH/   Tom Rini
• [U-Boot] [U-Boot,v2] Add custodians to the m68k subsystem.   Tom Rini
• [U-Boot] Add Alison Wang m68k custodian email/alias   Tom Rini
• [U-Boot] Replace <compiler.h> with <linux/compiler.h>   Tom Rini
• [U-Boot] [U-Boot, 1/2] linux/compat.h: remove redundant macro defines   Tom Rini
• [U-Boot] [U-Boot, 2/2] blackfin: include <linux/compiler.h> rather than define __iomem   Tom Rini
• [U-Boot] [U-Boot, v2] fdt: Allow non-FDT kernels to boot when CONFIG_OF_LIBFDT is defined   Tom Rini
• [U-Boot] [U-Boot, 1/3] lib: bzip2: move bzip2 files to lib/bzip2/ directory   Tom Rini
• [U-Boot] [U-Boot,2/3] libfdt: descend from lib/ to lib/libfdt/   Tom Rini
• [U-Boot] [U-Boot, 3/3] libfdt: move CONFIG_OF_LIBFDT and CONFIG_FIT to lib/Makefile   Tom Rini
• [U-Boot] kconfig: Fix warning "‘jump’ may be used uninitialized"   Tom Rini
• [U-Boot] [ANN] U-Boot v2015.01-rc3 released   Tom Rini
  • [U-Boot] [ANN] U-Boot v2015.01-rc3 released   Wolfgang Denk
  • [U-Boot] [ANN] U-Boot v2015.01-rc3 released   Robert Nelson
    • [U-Boot] [ANN] U-Boot v2015.01-rc3 released   Robert Nelson
    • [U-Boot] [ANN] U-Boot v2015.01-rc3 released   Tom Rini
      • [U-Boot] [ANN] U-Boot v2015.01-rc3 released   Nikita Kiryanov
      • [U-Boot] [ANN] U-Boot v2015.01-rc3 released   Stefano Babic
• [U-Boot] ti, am3517: errata 430973 workaround   Jeroen Hofstee
  • [U-Boot] ti, am3517: errata 430973 workaround   Andreas Bießmann
  • [U-Boot] ti, am3517: errata 430973 workaround   Robert Nelson
    • [U-Boot] ti, am3517: errata 430973 workaround   Jeroen Hofstee
• [U-Boot] [PATCH] arm/ls1021a: Add workaround for DDR erratum A008378   York Sun
• [U-Boot] [PATCH v2] fastboot: handle flash write to GPT partition   Steve Rae
  • [U-Boot] [PATCH v2] fastboot: handle flash write to GPT partition   Lukasz Majewski
    • [U-Boot] [PATCH v2] fastboot: handle flash write to GPT partition   Steve Rae
      • [U-Boot] [PATCH v2] fastboot: handle flash write to GPT partition   Lukasz Majewski
• [U-Boot] [PATCH v11 0/3] Adds support for Exynos5422 odroid xu3 board   Hyungwon Hwang
  • [U-Boot] [PATCH v11 1/3] config: exynos5420: move non common configs to specific board files   Hyungwon Hwang
  • [U-Boot] [PATCH v11 2/3] Odroid-XU3: Add support for Odroid-XU3   Hyungwon Hwang
  • [U-Boot] [PATCH v11 3/3] Odroid-XU3: Add documentation for Odroid-XU3   Hyungwon Hwang
  • [U-Boot] [PATCH v11 0/3] Adds support for Exynos5422 odroid xu3 board   Kevin Hilman
    • [U-Boot] [PATCH v11 0/3] Adds support for Exynos5422 odroid xu3 board   Hyungwon Hwang
      • [U-Boot] [PATCH v11 0/3] Adds support for Exynos5422 odroid xu3 board   Suriyan Ramasami
      • [U-Boot] [PATCH v11 0/3] Adds support for Exynos5422 odroid xu3 board   Hyungwon Hwang
      • [U-Boot] [PATCH v11 0/3] Adds support for Exynos5422 odroid xu3 board   Suriyan Ramasami
      • [U-Boot] [PATCH v11 0/3] Adds support for Exynos5422 odroid xu3 board   Kevin Hilman
      • [U-Boot] [PATCH v11 0/3] Adds support for Exynos5422 odroid xu3 board   Hyungwon Hwang
      • [U-Boot] [PATCH v11 0/3] Adds support for Exynos5422 odroid xu3 board   Hyungwon Hwang
• [U-Boot] [PATCH] sun6i: Add new board Merrii Hummingbird A31   Chen-Yu Tsai
  • [U-Boot] [PATCH] sun6i: Add new board Merrii Hummingbird A31   Hans de Goede
    • [U-Boot] [PATCH] sun6i: Add new board Merrii Hummingbird A31   Ian Campbell
  • [U-Boot] [PATCH] sun6i: Add new board Merrii Hummingbird A31   Hans de Goede
    • [U-Boot] [PATCH] sun6i: Add new board Merrii Hummingbird A31   Chen-Yu Tsai
• [U-Boot] [PATCH] p5040ds: changed liodn offsets   Laurentiu Tudor
  • [U-Boot] [PATCH] p5040ds: changed liodn offsets   York Sun
• [U-Boot] [PATCH v2] arm: ls1021a: Add CONFIG_DOS_PARTITION and CONFIG_CMD_FAT support   Alison Wang
  • [U-Boot] [PATCH v2] arm: ls1021a: Add CONFIG_DOS_PARTITION and CONFIG_CMD_FAT support   York Sun
• [U-Boot] [PATCH v1] arm: ls102xa: Fix SD/NAND/QSPI boot defination error for QE support   Alison Wang
  • [U-Boot] [PATCH v1] arm: ls102xa: Fix SD/NAND/QSPI boot defination error for QE support   York Sun
• [U-Boot] [PATCH v2] arm: ls102xa: Add QSPI boot support for LS1021AQDS/TWR board   Alison Wang
  • [U-Boot] [PATCH v2] arm: ls102xa: Add QSPI boot support for LS1021AQDS/TWR board   York Sun
    • [U-Boot] [PATCH v2] arm: ls102xa: Add QSPI boot support for LS1021AQDS/TWR board   Huan Wang
      • [U-Boot] [PATCH v2] arm: ls102xa: Add QSPI boot support for LS1021AQDS/TWR board   Huan Wang
  • [U-Boot] [PATCH v2] arm: ls102xa: Add QSPI boot support for LS1021AQDS/TWR board   York Sun
• [U-Boot] [PATCH v5] arm: ls102xa: Add NAND boot support for LS1021AQDS board   Alison Wang
  • [U-Boot] [PATCH v5] arm: ls102xa: Add NAND boot support for LS1021AQDS board   York Sun
• [U-Boot] [PATCH v1] ls102xa: etsec: Select ge0_clk125 for eTSEC clock muxing as default   Alison Wang
• [U-Boot] [PATCH ] MMC: add MMC_VERSION_5_0   Markus Niebel
• [U-Boot] /proc/cpuinfo Revision field is 0000 on raspberry pi after booting with u-boot   Christian Erhardt
  • [U-Boot] /proc/cpuinfo Revision field is 0000 on raspberry pi after booting with u-boot   Christian Erhardt
• [U-Boot] [PATCH 1/2] RFC: dm: Kconfig: Move all driver model CONFIGs to Kconfig   Simon Glass
  • [U-Boot] [PATCH 1/2] RFC: dm: Kconfig: Move all driver model CONFIGs to Kconfig   Masahiro YAMADA
• [U-Boot] [PATCH 2/2] Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig   Simon Glass
  • [U-Boot] [PATCH 2/2] Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig   Masahiro YAMADA
    • [U-Boot] [PATCH 2/2] Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig   Simon Glass
• [U-Boot] Hi Simon, Problems about RSA public exponents for verified boot   Simon Glass
• [U-Boot] [PATCH v2 0/27] x86: Add Intel Queensbay platform support   Bin Meng
  • [U-Boot] [PATCH v2 02/27] tools/ifdtool: Support writing multiple files (-w) simultaneously   Bin Meng
    • [U-Boot] [PATCH v2 02/27] tools/ifdtool: Support writing multiple files (-w) simultaneously   Simon Glass
  • [U-Boot] [PATCH v2 03/27] x86: Refactor u-boot.rom build rules   Bin Meng
  • [U-Boot] [PATCH v2 04/27] x86: Clean up asm-offsets   Bin Meng
  • [U-Boot] [PATCH v2 05/27] x86: ich6-gpio: Move setup_pch_gpios() to board support codes   Bin Meng
    • [U-Boot] [PATCH v2 05/27] x86: ich6-gpio: Move setup_pch_gpios() to board support codes   Simon Glass
  • [U-Boot] [PATCH v2 07/27] x86: Add a simple superio driver for SMSC LPC47M   Bin Meng
    • [U-Boot] [PATCH v2 07/27] x86: Add a simple superio driver for SMSC LPC47M   Simon Glass
  • [U-Boot] [PATCH v2 15/27] x86: Integrate Tunnel Creek processor microcode   Bin Meng
    • [U-Boot] [PATCH v2 15/27] x86: Integrate Tunnel Creek processor microcode   Simon Glass
      • [U-Boot] [PATCH v2 15/27] x86: Integrate Tunnel Creek processor microcode   Bin Meng
      • [U-Boot] [PATCH v2 15/27] x86: Integrate Tunnel Creek processor microcode   Simon Glass
      • [U-Boot] [PATCH v2 15/27] x86: Integrate Tunnel Creek processor microcode   Simon Glass
      • [U-Boot] [PATCH v2 15/27] x86: Integrate Tunnel Creek processor microcode   Bin Meng
      • [U-Boot] [PATCH v2 15/27] x86: Integrate Tunnel Creek processor microcode   Simon Glass
      • [U-Boot] [PATCH v2 15/27] x86: Integrate Tunnel Creek processor microcode   Bin Meng
      • [U-Boot] [PATCH v2 15/27] x86: Integrate Tunnel Creek processor microcode   Simon Glass
      • [U-Boot] [PATCH v2 15/27] x86: Integrate Tunnel Creek processor microcode   Bin Meng
  • [U-Boot] [PATCH v2 16/27] x86: Add basic support to queensbay platform and crownbay board   Bin Meng
    • [U-Boot] [PATCH v2 16/27] x86: Add basic support to queensbay platform and crownbay board   Simon Glass
      • [U-Boot] [PATCH v2 16/27] x86: Add basic support to queensbay platform and crownbay board   Bin Meng
      • [U-Boot] [PATCH v2 16/27] x86: Add basic support to queensbay platform and crownbay board   Simon Glass
      • [U-Boot] [PATCH v2 16/27] x86: Add basic support to queensbay platform and crownbay board   Bin Meng
      • [U-Boot] [PATCH v2 16/27] x86: Add basic support to queensbay platform and crownbay board   Simon Glass
      • [U-Boot] [PATCH v2 16/27] x86: Add basic support to queensbay platform and crownbay board   Bin Meng
      • [U-Boot] [PATCH v2 16/27] x86: Add basic support to queensbay platform and crownbay board   Simon Glass
  • [U-Boot] [PATCH v2 17/27] x86: ich6-gpio: Add Intel Tunnel Creek GPIO support   Bin Meng
    • [U-Boot] [PATCH v2 17/27] x86: ich6-gpio: Add Intel Tunnel Creek GPIO support   Simon Glass
  • [U-Boot] [PATCH v2 18/27] x86: Enable the queensbay cpu directory build   Bin Meng
  • [U-Boot] [PATCH v2 19/27] x86: Add queensbay and crownbay Kconfig files   Bin Meng
    • [U-Boot] [PATCH v2 19/27] x86: Add queensbay and crownbay Kconfig files   Simon Glass
  • [U-Boot] [PATCH v2 20/27] x86: Add crownbay defconfig and config.h   Bin Meng
    • [U-Boot] [PATCH v2 20/27] x86: Add crownbay defconfig and config.h   Simon Glass
  • [U-Boot] [PATCH v2 21/27] x86: Use consistent name XXX_ADDR for binary blob flash address   Bin Meng
    • [U-Boot] [PATCH v2 21/27] x86: Use consistent name XXX_ADDR for binary blob flash address   Simon Glass
  • [U-Boot] [PATCH v2 22/27] x86: Include FSP and CMC binary in the u-boot.rom build rules   Bin Meng
    • [U-Boot] [PATCH v2 22/27] x86: Include FSP and CMC binary in the u-boot.rom build rules   Simon Glass
  • [U-Boot] [PATCH v2 23/27] x86: crownbay: Add SPI flash support   Bin Meng
    • [U-Boot] [PATCH v2 23/27] x86: crownbay: Add SPI flash support   Simon Glass
      • [U-Boot] [PATCH v2 23/27] x86: crownbay: Add SPI flash support   Bin Meng
  • [U-Boot] [PATCH v2 24/27] x86: crownbay: Enable Intel E1000 NIC support   Bin Meng
  • [U-Boot] [PATCH v2 25/27] x86: crownbay: Add SDHCI support   Bin Meng
    • [U-Boot] [PATCH v2 25/27] x86: crownbay: Add SDHCI support   Simon Glass
  • [U-Boot] [PATCH v2 26/27] x86: Rename coreboot-serial to x86-serial   Bin Meng
    • [U-Boot] [PATCH v2 26/27] x86: Rename coreboot-serial to x86-serial   Simon Glass
  • [U-Boot] [PATCH v2 27/27] x86: Add a README.x86 for U-Boot on x86 support   Bin Meng
    • [U-Boot] [PATCH v2 27/27] x86: Add a README.x86 for U-Boot on x86 support   Simon Glass
• [U-Boot] [PATCH v2 01/27] x86: Make ROM_SIZE configurable in Kconfig   Bin Meng
• [U-Boot] [PATCH v2 06/27] x86: Add Intel Crown Bay board dts file   Bin Meng
• [U-Boot] [PATCH v2 08/27] x86: Add Intel Topcliff PCH device IDs   Bin Meng
• [U-Boot] [PATCH v2 09/27] x86: ich-spi: Add Intel Tunnel Creek SPI controller support   Bin Meng
• [U-Boot] [PATCH v2 10/27] x86: Initial import from Intel FSP release for Queensbay platform   Bin Meng
  • [U-Boot] [PATCH v2 10/27] x86: Initial import from Intel FSP release for Queensbay platform   Simon Glass
    • [U-Boot] [PATCH v2 10/27] x86: Initial import from Intel FSP release for Queensbay platform   Bin Meng
      • [U-Boot] [PATCH v2 10/27] x86: Initial import from Intel FSP release for Queensbay platform   Simon Glass
• [U-Boot] [PATCH v2 11/27] x86: queensbay: Adapt FSP support codes   Bin Meng
  • [U-Boot] [PATCH v2 11/27] x86: queensbay: Adapt FSP support codes   Simon Glass
    • [U-Boot] [PATCH v2 11/27] x86: queensbay: Adapt FSP support codes   Bin Meng
• [U-Boot] [PATCH v2 12/27] x86: Add post failure codes for bist and car   Bin Meng
• [U-Boot] [PATCH v2 13/27] x86: Support Intel FSP initialization path in start.S   Bin Meng
  • [U-Boot] [PATCH v2 13/27] x86: Support Intel FSP initialization path in start.S   Simon Glass
• [U-Boot] [PATCH v2 14/27] x86: Add a simple command to show FSP HOB information   Bin Meng
  • [U-Boot] [PATCH v2 14/27] x86: Add a simple command to show FSP HOB information   Simon Glass
    • [U-Boot] [PATCH v2 14/27] x86: Add a simple command to show FSP HOB information   Bin Meng
      • [U-Boot] [PATCH v2 14/27] x86: Add a simple command to show FSP HOB information   Simon Glass
• [U-Boot] [PATCH 0/4] sf: SST changes, Byte program   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH 1/4] sf: Fix look for the fastest read command   Jagannadha Sutradharudu Teki
    • [U-Boot] [PATCH 1/4] sf: Fix look for the fastest read command   Bin Meng
  • [U-Boot] [PATCH 2/4] spi: Fix flag collision for SST_WP   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH 3/4] spi: sf: Support byte program for sst spi flash   Jagannadha Sutradharudu Teki
    • [U-Boot] [PATCH 3/4] spi: sf: Support byte program for sst spi flash   Bin Meng
      • [U-Boot] [PATCH 3/4] spi: sf: Support byte program for sst spi flash   Jagan Teki
      • [U-Boot] [PATCH 3/4] spi: sf: Support byte program for sst spi flash   Bin Meng
  • [U-Boot] [PATCH 4/4] sf: Enable byte program support   Jagannadha Sutradharudu Teki
    • [U-Boot] [PATCH 4/4] sf: Enable byte program support   Bin Meng
  • [U-Boot] [PATCH 0/4] sf: SST changes, Byte program   Jagan Teki
• [U-Boot] [PATCH] mxsldr: add status read after firmware upload   Hodaszi, Robert
• [U-Boot] [PATCH] arm:ls1021a:configure ls1021 scfg for QSPI   York Sun
  • [U-Boot] [PATCH] arm:ls1021a:configure ls1021 scfg for QSPI   Huan Wang
• [U-Boot] [U-boot PATCH] keystone: set default pci mode to root complex   Murali Karicheri
  • [U-Boot] [U-boot PATCH] keystone: set default pci mode to root complex   Murali Karicheri
• [U-Boot] [PATCH v3] bcm281xx: add support for "USB OTG clock"   Steve Rae
  • [U-Boot] [PATCH v3] bcm281xx: add support for "USB OTG clock"   Felipe Balbi
  • [U-Boot] [U-Boot,v3] bcm281xx: add support for "USB OTG clock"   Tom Rini
• [U-Boot] [U-Boot, v5, 1/3] stv0991: Add basic stv0991 architecture support   Tom Rini
• [U-Boot] [U-Boot,v5,2/3] stv0991: enable ethernet support   Tom Rini
• [U-Boot] [U-Boot, v5, 3/3] stv0991: enable default and misc command configs   Tom Rini
• [U-Boot] compiling error for rc3   York Sun
  • [U-Boot] compiling error for rc3   Nikita Kiryanov
• [U-Boot] [PATCH] common/board_f.c: fix compile error when tracing disabled   Kevin Hilman
  • [U-Boot] [PATCH] common/board_f.c: fix compile error when tracing disabled   Simon Glass
  • [U-Boot] common/board_f.c: fix compile error when tracing disabled   Tom Rini
• [U-Boot] [RFC PATCH v1 0/1] net: Support for Broadcom Tigon 3 NICs   Chris Packham
  • [U-Boot] [RFC PATCH v1] net: Add support for Tigon3 based Ethernet NICs   Chris Packham
• [U-Boot] [PATCHv1] powerpc/p2041rdb: Convert to generic board   Chris Packham
  • [U-Boot] [PATCHv1] powerpc/p2041rdb: Convert to generic board   York Sun
    • [U-Boot] [PATCHv1] powerpc/p2041rdb: Convert to generic board   Chris Packham
• [U-Boot] [PATCH v4 0/23] ARM: tegra: Add PCIe support   Simon Glass
  • [U-Boot] [PATCH v4 01/23] power: Add AMS AS3722 PMIC support   Simon Glass
  • [U-Boot] [PATCH v4 02/23] ARM: tegra: Implement tegra_plle_enable()   Simon Glass
  • [U-Boot] [PATCH v4 03/23] ARM: tegra: Provide PCIEXCLK reset ID   Simon Glass
  • [U-Boot] [PATCH v4 04/23] ARM: tegra: Implement powergate support   Simon Glass
  • [U-Boot] [PATCH v4 05/23] ARM: tegra: Implement XUSB pad controller   Simon Glass
  • [U-Boot] [PATCH v4 06/23] ARM: tegra: Add XUSB pad controller on Tegra124   Simon Glass
  • [U-Boot] [PATCH v4 07/23] ARM: tegra: Enable XUSB pad controller on Jetson TK1   Simon Glass
  • [U-Boot] [PATCH v4 08/23] pci: tegra: Add Tegra PCIe driver   Simon Glass
  • [U-Boot] [PATCH v4 09/23] ARM: tegra: Add Tegra20 PCIe device tree node   Simon Glass
  • [U-Boot] [PATCH v4 10/23] ARM: tegra: Enable PCIe on TrimSlice   Simon Glass
  • [U-Boot] [PATCH v4 11/23] ARM: tegra: Add GIC for Tegra30   Simon Glass
  • [U-Boot] [PATCH v4 12/23] ARM: tegra: Add Tegra30 PCIe device tree node   Simon Glass
  • [U-Boot] [PATCH v4 13/23] ARM: tegra: Enable PCIe on Cardhu   Simon Glass
  • [U-Boot] [PATCH v4 14/23] ARM: tegra: Enable PCIe on Beaver   Simon Glass
  • [U-Boot] [PATCH v4 15/23] ARM: tegra: Add GIC for Tegra124   Simon Glass
  • [U-Boot] [PATCH v4 16/23] ARM: tegra: Add Tegra124 PCIe device tree node   Simon Glass
  • [U-Boot] [PATCH v4 17/23] ARM: tegra: Enable PCIe on Jetson TK1   Simon Glass
  • [U-Boot] [PATCH v4 18/23] ARM: Implement non-cached memory support   Simon Glass
    • [U-Boot] [PATCH v4 18/23] ARM: Implement non-cached memory support   Simon Glass
      • [U-Boot] [PATCH v4 18/23] ARM: Implement non-cached memory support   Albert ARIBAUD
      • [U-Boot] [PATCH v4 18/23] ARM: Implement non-cached memory support   Simon Glass
  • [U-Boot] [PATCH v4 19/23] ARM: tegra: Enable non-cached memory   Simon Glass
  • [U-Boot] [PATCH v4 20/23] net: rtl8169: Honor CONFIG_SYS_RX_ETH_BUFFER   Simon Glass
  • [U-Boot] [PATCH v4 21/23] net: rtl8169: Properly align buffers   Simon Glass
  • [U-Boot] [PATCH v4 22/23] net: rtl8169: Use non-cached memory if available   Simon Glass
  • [U-Boot] [PATCH v4 23/23] net: rtl8169: Add support for RTL-8168/8111g   Simon Glass
  • [U-Boot] [PATCH v4 0/23] ARM: tegra: Add PCIe support   Simon Glass
• [U-Boot] [PATCH 1/4] arm: rmobile: Add mmc.h for sh_mmcif of rmobile   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 2/4] arm: rmobile: rcar: Add support ext2 and ext4 file system   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 3/4] arm: rmobile: lager: Add support MMC and MMC command   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 4/4] arm: rmobile: alt: Add support MMC and MMC command   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2 04/11] fdt: Add device tree memory bindings   Simon Glass
• [U-Boot] [PATCH] dm: sh: serial: Add support driver model   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH] dm: sh: serial: Add support driver model   Simon Glass
    • [U-Boot] [PATCH] dm: sh: serial: Add support driver model   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] serial: sh: Remove invalid UTF-8 character   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/2] arm: ls102xa: Add dummy gpio.h to enable CONFIG_OF_CONTROL   Ruchika Gupta
  • [U-Boot] [PATCH 1/2] arm: ls102xa: Add dummy gpio.h to enable CONFIG_OF_CONTROL   Masahiro Yamada
    • [U-Boot] [PATCH 1/2] arm: ls102xa: Add dummy gpio.h to enable CONFIG_OF_CONTROL   Simon Glass
• [U-Boot] [PATCH 2/2] powerpc: mpc85xx: Add dummy gpio.h to enable CONFIG_OF_CONTROL   Ruchika Gupta
• [U-Boot] Pull request: u-boot-sh/rmolbile   Nobuhiro Iwamatsu
  • [U-Boot] Pull request: u-boot-sh/rmolbile   Tom Rini
• [U-Boot] [PATCH] arm: rmobile: kconfig: Remove '+S:' prefix from defconfig files   Nobuhiro Iwamatsu
• [U-Boot] Use .data section in SPL ?   Masahiro Yamada
  • [U-Boot] Use .data section in SPL ?   Tom Rini
    • [U-Boot] Use .data section in SPL ?   Simon Glass
      • [U-Boot] Use .data section in SPL ?   Tom Rini
      • [U-Boot] Use .data section in SPL ?   Simon Glass
      • [U-Boot] Use .data section in SPL ?   Tom Rini
• [U-Boot] [PATCH] dm: serial: pl01x: Add priv_auto_alloc_size   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH] dm: serial: pl01x: Add priv_auto_alloc_size   Simon Glass
• [U-Boot] [PATCH] mtd: nand: mxs: fix PIO_WORD number   Luca Ellero
  • [U-Boot] [PATCH] mtd: nand: mxs: fix PIO_WORD number   Stefan Roese
    • [U-Boot] [PATCH] mtd: nand: mxs: fix PIO_WORD number   Luca Ellero
• [U-Boot] [RESEND PATCH] x86: ich-spi: Fix a bug of reading from a non-64 bytes aligned address   Bin Meng
  • [U-Boot] [RESEND PATCH] x86: ich-spi: Fix a bug of reading from a non-64 bytes aligned address   Simon Glass
• [U-Boot] [PATCH v3 1/2] x86: ich-spi: Set the rx operation mode for ich 7   Bin Meng
• [U-Boot] [PATCH v3 2/2] x86: ich-spi: Set the tx operation mode for ich 7   Bin Meng
  • [U-Boot] [PATCH v3 2/2] x86: ich-spi: Set the tx operation mode for ich 7   Simon Glass
    • [U-Boot] [PATCH v3 2/2] x86: ich-spi: Set the tx operation mode for ich 7   Bin Meng
      • [U-Boot] [PATCH v3 2/2] x86: ich-spi: Set the tx operation mode for ich 7   Simon Glass
• [U-Boot] [PATCH] arm: mx6: Add Barco platinum-picon and platinum-titanium   Stefan Roese
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
  • [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] [PATCH] memmove_wd: copy chunk down from big address if parameter to is larger than from   Sonic Zhang
  • [U-Boot] [PATCH] memmove_wd: copy chunk down from big address if parameter to is larger than from   Simon Glass
• [U-Boot] [PATCH] powerpc/t4240rdb: Add alternate SerDes 2 protocol to align with RCW   Chunhe Lan
• [U-Boot] [PATCH v2] powerpc/t4240rdb: Add alternate SerDes 2 protocol to align with RCW   Chunhe Lan
• [U-Boot] [PATCH v3 0/9] sf: Update flash params for supported read commands and sector size   Bin Meng
  • [U-Boot] [PATCH v3 1/9] sf: Update SST flash params   Bin Meng
  • [U-Boot] [PATCH v3 2/9] sf: Update Atmel flash params   Bin Meng
  • [U-Boot] [PATCH v3 3/9] sf: Update EON flash params   Bin Meng
    • [U-Boot] [PATCH v3 3/9] sf: Update EON flash params   Jagan Teki
      • [U-Boot] [PATCH v3 3/9] sf: Update EON flash params   Bin Meng
  • [U-Boot] [PATCH v3 4/9] sf: Update GigaDevice flash params   Bin Meng
  • [U-Boot] [PATCH v3 5/9] sf: Update Macronix flash params   Bin Meng
  • [U-Boot] [PATCH v3 6/9] sf: Update Spansion flash params   Bin Meng
    • [U-Boot] [PATCH v3 6/9] sf: Update Spansion flash params   Jagan Teki
      • [U-Boot] [PATCH v3 6/9] sf: Update Spansion flash params   Bin Meng
  • [U-Boot] [PATCH v3 7/9] sf: Update Micron flash params   Bin Meng
  • [U-Boot] [PATCH v3 8/9] sf: Update Winbond flash params   Bin Meng
  • [U-Boot] [PATCH v3 9/9] sf: Give proper spacing between flash table params   Bin Meng
  • [U-Boot] [PATCH v3 0/9] sf: Update flash params for supported read commands and sector size   Jagan Teki
    • [U-Boot] [PATCH v3 0/9] sf: Update flash params for supported read commands and sector size   Bin Meng
      • [U-Boot] [PATCH v3 0/9] sf: Update flash params for supported read commands and sector size   Jagan Teki
      • [U-Boot] [PATCH v3 0/9] sf: Update flash params for supported read commands and sector size   Bin Meng
      • [U-Boot] [PATCH v3 0/9] sf: Update flash params for supported read commands and sector size   Bin Meng
      • [U-Boot] [PATCH v3 0/9] sf: Update flash params for supported read commands and sector size   Jagan Teki
      • [U-Boot] [PATCH v3 0/9] sf: Update flash params for supported read commands and sector size   Bin Meng
      • [U-Boot] [PATCH v3 0/9] sf: Update flash params for supported read commands and sector size   Jagan Teki
• [U-Boot] USB Host not enumerating properly on AM335x-based board   Maxime Ripard
  • [U-Boot] USB Host not enumerating properly on AM335x-based board   Marek Vasut
    • [U-Boot] USB Host not enumerating properly on AM335x-based board   Maxime Ripard
      • [U-Boot] USB Host not enumerating properly on AM335x-based board   Marek Vasut
• [U-Boot] [PATCH v6 0/11] dm: Add I2C support and convert sandbox, tegra   Simon Glass
  • [U-Boot] [PATCH v6 01/11] dm: i2c: Add a uclass for I2C   Simon Glass
    • [U-Boot] [PATCH v6 01/11] dm: i2c: Add a uclass for I2C   Simon Glass
  • [U-Boot] [PATCH v6 02/11] dm: i2c: Implement driver model support in the i2c command   Simon Glass
    • [U-Boot] [PATCH v6 02/11] dm: i2c: Implement driver model support in the i2c command   Simon Glass
  • [U-Boot] [PATCH v6 03/11] dm: i2c: Add I2C emulation driver for sandbox   Simon Glass
    • [U-Boot] [PATCH v6 03/11] dm: i2c: Add I2C emulation driver for sandbox   Simon Glass
  • [U-Boot] [PATCH v6 04/11] dm: i2c: Add a sandbox I2C driver   Simon Glass
    • [U-Boot] [PATCH v6 04/11] dm: i2c: Add a sandbox I2C driver   Masahiro YAMADA
      • [U-Boot] [PATCH v6 04/11] dm: i2c: Add a sandbox I2C driver   Simon Glass
      • [U-Boot] [PATCH v6 04/11] dm: i2c: Add a sandbox I2C driver   Masahiro Yamada
      • [U-Boot] [PATCH v6 04/11] dm: i2c: Add a sandbox I2C driver   Simon Glass
    • [U-Boot] [PATCH v6 04/11] dm: i2c: Add a sandbox I2C driver   Simon Glass
  • [U-Boot] [PATCH v6 05/11] dm: i2c: Add an I2C EEPROM simulator   Simon Glass
    • [U-Boot] [PATCH v6 05/11] dm: i2c: Add an I2C EEPROM simulator   Masahiro Yamada
      • [U-Boot] [PATCH v6 05/11] dm: i2c: Add an I2C EEPROM simulator   Simon Glass
  • [U-Boot] [PATCH v6 06/11] dm: i2c: config: Enable I2C for sandbox using driver model   Simon Glass
    • [U-Boot] [PATCH v6 06/11] dm: i2c: config: Enable I2C for sandbox using driver model   Simon Glass
  • [U-Boot] [PATCH v6 07/11] dm: i2c: dts: Add an I2C bus for sandbox   Simon Glass
    • [U-Boot] [PATCH v6 07/11] dm: i2c: dts: Add an I2C bus for sandbox   Simon Glass
  • [U-Boot] [PATCH v6 08/11] dm: Add a simple EEPROM driver   Simon Glass
    • [U-Boot] [PATCH v6 08/11] dm: Add a simple EEPROM driver   Simon Glass
  • [U-Boot] [PATCH v6 09/11] dm: i2c: Add tests for I2C   Simon Glass
    • [U-Boot] [PATCH v6 09/11] dm: i2c: Add tests for I2C   Simon Glass
  • [U-Boot] [PATCH v6 10/11] dm: device: Add newline to debug() messages   Simon Glass
    • [U-Boot] [PATCH v6 10/11] dm: device: Add newline to debug() messages   Simon Glass
  • [U-Boot] [PATCH v6 11/11] dm: i2c: tegra: Convert to driver model   Simon Glass
• [U-Boot] [PATCH v1 1/1] Fix autoconf_is_current make function   mgerlach
• [U-Boot] [PATCH v5 3/3] ARM: tegra: Add support for nyan-big board   Simon Glass
• [U-Boot] [PATCH v3 2/2] dm: serial_pl01x: Add missing private data size   Simon Glass
• [U-Boot] [PATCH v3 1/2] dm: rpi: Move serial to driver model   Simon Glass
• [U-Boot] [PATCH v5 3/3] ARM: tegra: Add support for nyan-big board   Simon Glass
  • [U-Boot] [PATCH v5 3/3] ARM: tegra: Add support for nyan-big board   Simon Glass
• [U-Boot] [PATCH] beagle_x15: enable NFS command   Felipe Balbi
• [U-Boot] [PATCH 1/2] usb, g_dnl: generalize DFU detach functions   Rob Herring
  • [U-Boot] [PATCH 2/2] fastboot: add support for continue command   Rob Herring
    • [U-Boot] [PATCH 2/2] fastboot: add support for continue command   Marek Vasut
    • [U-Boot] [PATCH 2/2] fastboot: add support for continue command   Lukasz Majewski
  • [U-Boot] [PATCH 1/2] usb, g_dnl: generalize DFU detach functions   Marek Vasut
  • [U-Boot] [PATCH 1/2] usb, g_dnl: generalize DFU detach functions   Lukasz Majewski
• [U-Boot] [PATCH v5 3/3] ARM: tegra: Add support for nyan-big board   Simon Glass
  • [U-Boot] [PATCH v5 3/3] ARM: tegra: Add support for nyan-big board   Simon Glass
• [U-Boot] [PATCH] spl: spl_nor: surround Linux-load code with #ifdef CONFIG_SPL_OS_BOOT   Masahiro Yamada
  • [U-Boot] [PATCH] spl: spl_nor: surround Linux-load code with #ifdef CONFIG_SPL_OS_BOOT   Tom Rini
    • [U-Boot] [PATCH] spl: spl_nor: surround Linux-load code with #ifdef CONFIG_SPL_OS_BOOT   Masahiro Yamada
• [U-Boot] [PATCH v3] fastboot: handle flash write to GPT partitions   Steve Rae
  • [U-Boot] [PATCH v3] fastboot: handle flash write to GPT partitions   Lukasz Majewski
• [U-Boot] [PATCH] bios_emulator: Correct ordering of includes   Simon Glass
  • [U-Boot] [PATCH] bios_emulator: Correct ordering of includes   Simon Glass
• [U-Boot] [PATCH 01/19] lib: errno: introduce errno_str(): returns errno related message   Simon Glass
  • [U-Boot] [PATCH 01/19] lib: errno: introduce errno_str(): returns errno related message   Przemyslaw Marczak
    • [U-Boot] [PATCH 01/19] lib: errno: introduce errno_str(): returns errno related message   Simon Glass
• [U-Boot] VEXPRESS64 ARMv8 U-Boot maintenance   Linus Walleij
  • [U-Boot] VEXPRESS64 ARMv8 U-Boot maintenance   Tom Rini
  • [U-Boot] VEXPRESS64 ARMv8 U-Boot maintenance   Steve Rae
• [U-Boot] [PATCH] mtd: nand: revive "nand scrub" command   Masahiro Yamada
  • [U-Boot] [PATCH] mtd: nand: revive "nand scrub" command   Scott Wood
    • [U-Boot] [PATCH] mtd: nand: revive "nand scrub" command   Marek Vasut
      • [U-Boot] [PATCH] mtd: nand: revive "nand scrub" command   Scott Wood
      • [U-Boot] [PATCH] mtd: nand: revive "nand scrub" command   Heiko Schocher
      • [U-Boot] [PATCH] mtd: nand: revive "nand scrub" command   Masahiro Yamada
      • [U-Boot] [PATCH] mtd: nand: revive "nand scrub" command   Marek Vasut
      • [U-Boot] [PATCH] mtd: nand: revive "nand scrub" command   Scott Wood
      • [U-Boot] [PATCH] mtd: nand: revive "nand scrub" command   Tom Rini
      • [U-Boot] [PATCH] mtd: nand: revive "nand scrub" command   Heiko Schocher
      • [U-Boot] [PATCH] mtd: nand: revive "nand scrub" command   Scott Wood
      • [U-Boot] [PATCH] mtd: nand: revive "nand scrub" command   Heiko Schocher
      • [U-Boot] [PATCH] mtd: nand: revive "nand scrub" command   Masahiro Yamada
• [U-Boot] watchdog not resetting beaglebone after timeout period   Belisko Marek
  • [U-Boot] watchdog not resetting beaglebone after timeout period   Tom Rini
    • [U-Boot] watchdog not resetting beaglebone after timeout period   Belisko Marek
• [U-Boot] [PATCH 1/2] dfu: mmc: check if mmc device exists in mmc_block_op()   Przemyslaw Marczak
  • [U-Boot] [PATCH 1/2] dfu: mmc: check if mmc device exists in mmc_block_op()   Lukasz Majewski
  • [U-Boot] [Patch V2 1/3] dfu: mmc: check if mmc device exists in mmc_block_op()   Przemyslaw Marczak
    • [U-Boot] [Patch V2 3/3] dfu: dfu_get_buf: check the value of env dfu_bufsiz before use   Przemyslaw Marczak
      • [U-Boot] [Patch V2 3/3] dfu: dfu_get_buf: check the value of env dfu_bufsiz before use   Lukasz Majewski
      • [U-Boot] [Patch V2 3/3] dfu: dfu_get_buf: check the value of env dfu_bufsiz before use   Marek Vasut
      • [U-Boot] [Patch V2 3/3] dfu: dfu_get_buf: check the value of env dfu_bufsiz before use   Lukasz Majewski
      • [U-Boot] [Patch V2 3/3] dfu: dfu_get_buf: check the value of env dfu_bufsiz before use   Marek Vasut
    • [U-Boot] [Patch V2 1/3] dfu: mmc: check if mmc device exists in mmc_block_op()   Lukasz Majewski
• [U-Boot] [PATCH 2/2] gadget: f_thor: check pointers before use in download_tail()   Przemyslaw Marczak
  • [U-Boot] [PATCH 2/2] gadget: f_thor: check pointers before use in download_tail()   Lukasz Majewski
• [U-Boot] Controlling write protect pin on SPI flash   Andy Pont
• [U-Boot] [PATCH] fs: fat: read: fix fat16 ls/read issue   Przemyslaw Marczak
  • [U-Boot] [PATCH] fs: fat: read: fix fat16 ls/read issue   Simon Glass
    • [U-Boot] [PATCH] fs: fat: read: fix fat16 ls/read issue   Przemyslaw Marczak
      • [U-Boot] [PATCH] fat: scripts for prepare and test read fat files   Przemyslaw Marczak
      • [U-Boot] [PATCH] fat: scripts for prepare and test read fat files   Przemyslaw Marczak
      • [U-Boot] [PATCH] fat: scripts for prepare and test read fat files   Simon Glass
      • [U-Boot] [PATCH] fat: scripts for prepare and test read fat files   Przemyslaw Marczak
      • [U-Boot] [PATCH] fs: fat: read: fix fat16 ls/read issue   Simon Glass
      • [U-Boot] [PATCH] fs: fat: read: fix fat16 ls/read issue   Przemyslaw Marczak
      • [U-Boot] [PATCH] fs: fat: read: fix fat16 ls/read issue   Przemyslaw Marczak
      • [U-Boot] [PATCH] fs: fat: read: fix fat16 ls/read issue   Simon Glass
      • [U-Boot] [PATCH] fs: fat: read: fix fat16 ls/read issue   Przemyslaw Marczak
      • [U-Boot] [PATCH] fs: fat: read: fix fat16 ls/read issue   Simon Glass
      • [U-Boot] [PATCH] fs: fat: read: fix fat16 ls/read issue   Przemyslaw Marczak
      • [U-Boot] [PATCH] fs: fat: read: fix fat16 ls/read issue   Simon Glass
      • [U-Boot] [PATCH] fs: fat: read: fix fat16 ls/read issue   Przemyslaw Marczak
  • [U-Boot] [PATCH] fs: fat: read: fix fat16 ls/read issue   Simon Glass
    • [U-Boot] [PATCH] fs: fat: read: fix fat16 ls/read issue   Przemyslaw Marczak
    • [U-Boot] [PATCH] fs: fat: read: fix fat16 ls/read issue   Przemyslaw Marczak
      • [U-Boot] [PATCH] fs: fat: read: fix fat16 ls/read issue   Simon Glass
      • [U-Boot] [PATCH] fs: fat: read: fix fat16 ls/read issue   Przemyslaw Marczak
      • [U-Boot] [PATCH] fs: fat: read: fix fat16 ls/read issue   Simon Glass
      • [U-Boot] [PATCH] fs: fat: read: fix fat16 ls/read issue   Przemyslaw Marczak
  • [U-Boot] [PATCH v2] fs: fat: read: fix fat16 ls/read issue   Przemyslaw Marczak
    • [U-Boot] [PATCH v3] fs: fat: read: fix fat16 ls/read issue   Przemyslaw Marczak
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
  • [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
    • [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
      • [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
  • [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PATCH v5 3/3] ARM: tegra: Add support for nyan-big board   Simon Glass
  • [U-Boot] [PATCH v5 3/3] ARM: tegra: Add support for nyan-big board   Simon Glass
• [U-Boot] [PATCH] arm: socfpga: board: Repair Micrel PHY tuning   Marek Vasut
  • [U-Boot] [PATCH] arm: socfpga: board: Repair Micrel PHY tuning   Marek Vasut
• [U-Boot] Please pull u-boot-fsl-qoriq.git master   York Sun
  • [U-Boot] Please pull u-boot-fsl-qoriq.git master   York Sun
• [U-Boot] [PATCH] arm: ls102xa: fixed a bus frequency setting error   York Sun
• [U-Boot] [PATCH] arm: ls102xa: clear EPU registers for deep sleep   York Sun
• [U-Boot] [PATCH] arm: ls102xa: Update PCIe dts node status   York Sun
• [U-Boot] [PATCH] ls1021aqds: set the default I2C channel before DDR init   York Sun
• [U-Boot] [PATCH v3] ls1021aqds: add hwconfig setting to do pin mux   York Sun
• [U-Boot] [PATCH 2/3][v2] drivers: usb: Make usb device-tree fixup code architecture independent   York Sun
• [U-Boot] [PATCH 3/3] drivers: usb: fsl: Add USB device-tree errata framework   York Sun
• [U-Boot] [PATCH] drivers: usb: fsl: Check USB Erratum A007792 applicability   York Sun
• [U-Boot] [PATCH] fsl/sleep: updated the deep sleep framework for QorIQ platforms   York Sun
• [U-Boot] [PATCHv4 1/6] ARM: HYP/non-sec: add the pen address BE mode support.   York Sun
• [U-Boot] [PATCHv4 3/6] ls1021a: adding a secondary core boot address and kick functions   York Sun
• [U-Boot] [PATCHv4 4/6] ls102xa: changing a few targets' configurations.   York Sun
• [U-Boot] [PATCHv4 5/6] ARM: ls102xa: allow all the peripheral access permission as R/W.   York Sun
• [U-Boot] [PATCHv4 6/6] ARM: ls102xa: Setting device's stream id for SMMUs.   York Sun
• [U-Boot] [PATCH 1/1] driver/mtd: Fix IFC compilation warnings   York Sun
• [U-Boot] [PATCHv4 respin 2/6] ARM: HYP/non-sec: Fix the ARCH Timer frequency setting.   York Sun
  • [U-Boot] [PATCHv4 respin 2/6] ARM: HYP/non-sec: Fix the ARCH Timer frequency setting.   York Sun
• [U-Boot] Please pull u-boot-fsl-qoriq.git master   York Sun
  • [U-Boot] Please pull u-boot-fsl-qoriq.git master   Tom Rini
• [U-Boot] [PATCHv4 2/6] ARM: HYP/non-sec: Fix the ARCH Timer frequency setting.   York Sun
• [U-Boot] Please pull u-boot-dm   Simon Glass
  • [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] [PATCH v2] dm: sh: serial: Add support driver model   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH v2] dm: sh: serial: Add support driver model   Simon Glass
    • [U-Boot] [PATCH v2] dm: sh: serial: Add support driver model   Nobuhiro Iwamatsu
• [U-Boot] [RESEND][PATCH v11 0/3] Adds support for Exynos5422 odroid xu3 board   Hyungwon Hwang
  • [U-Boot] [RESEND][PATCH v11 1/3] config: exynos5420: move non common configs to specific board files   Hyungwon Hwang
  • [U-Boot] [RESEND][PATCH v11 2/3] Odroid-XU3: Add support for Odroid-XU3   Hyungwon Hwang
  • [U-Boot] [RESEND][PATCH v11 3/3] Odroid-XU3: Add documentation for Odroid-XU3   Hyungwon Hwang
  • [U-Boot] [RESEND][PATCH v11 0/3] Adds support for Exynos5422 odroid xu3 board   Minkyu Kang
• [U-Boot] Controlling write protect pin on SPI flash   Simon Glass
• [U-Boot] Controlling write protect pin on SPI flash   Jagan Teki
• [U-Boot] [PATCH] b4860: Correct LIODN assignment for PCIe   Laurentiu Tudor
  • [U-Boot] [PATCH] b4860: Correct LIODN assignment for PCIe   York Sun
• [U-Boot] [PATCH] powerpc/mpc85xx: Define PBI Flash Base for C29XPCIE Secure Boot   Aneesh Bansal
• [U-Boot] [PATCH V4 2/3] usb: eth: add ASIX AX88179 DRIVER   René Griessl
• [U-Boot] [PATCH] mtd: nand: mxs: fix PIO_WORD number   Stefan Roese
  • [U-Boot] [PATCH] mtd: nand: mxs: fix PIO_WORD number   Marek Vasut
    • [U-Boot] [PATCH] mtd: nand: mxs: fix PIO_WORD number   Luca Ellero
      • [U-Boot] [PATCH] mtd: nand: mxs: fix PIO_WORD number   Marek Vasut
      • [U-Boot] [PATCH] mtd: nand: mxs: fix PIO_WORD number   Luca Ellero
      • [U-Boot] [PATCH] mtd: nand: mxs: fix PIO_WORD number   Marek Vasut
      • [U-Boot] [PATCH] mtd: nand: mxs: fix PIO_WORD number   Luca Ellero
      • [U-Boot] [PATCH] mtd: nand: mxs: fix PIO_WORD number   Marek Vasut
• [U-Boot] [PATCH v3 0/27] x86: Add Intel Queensbay platform support   Bin Meng
  • [U-Boot] [PATCH v3 01/27] x86: Make ROM_SIZE configurable in Kconfig   Bin Meng
    • [U-Boot] [PATCH v3 01/27] x86: Make ROM_SIZE configurable in Kconfig   Simon Glass
  • [U-Boot] [PATCH v3 02/27] tools/ifdtool: Support writing multiple files (-w) simultaneously   Bin Meng
    • [U-Boot] [PATCH v3 02/27] tools/ifdtool: Support writing multiple files (-w) simultaneously   Simon Glass
  • [U-Boot] [PATCH v3 03/27] x86: Refactor u-boot.rom build rules   Bin Meng
    • [U-Boot] [PATCH v3 03/27] x86: Refactor u-boot.rom build rules   Simon Glass
  • [U-Boot] [PATCH v3 04/27] x86: Clean up asm-offsets   Bin Meng
    • [U-Boot] [PATCH v3 04/27] x86: Clean up asm-offsets   Simon Glass
  • [U-Boot] [PATCH v3 05/27] x86: ich6-gpio: Move setup_pch_gpios() to board support codes   Bin Meng
    • [U-Boot] [PATCH v3 05/27] x86: ich6-gpio: Move setup_pch_gpios() to board support codes   Simon Glass
  • [U-Boot] [PATCH v3 06/27] x86: Add Intel Crown Bay board dts file   Bin Meng
    • [U-Boot] [PATCH v3 06/27] x86: Add Intel Crown Bay board dts file   Simon Glass
  • [U-Boot] [PATCH v3 07/27] x86: Add a simple superio driver for SMSC LPC47M   Bin Meng
    • [U-Boot] [PATCH v3 07/27] x86: Add a simple superio driver for SMSC LPC47M   Simon Glass
  • [U-Boot] [PATCH v3 08/27] x86: Add Intel Topcliff PCH device IDs   Bin Meng
    • [U-Boot] [PATCH v3 08/27] x86: Add Intel Topcliff PCH device IDs   Simon Glass
  • [U-Boot] [PATCH v3 09/27] x86: ich-spi: Add Intel Tunnel Creek SPI controller support   Bin Meng
    • [U-Boot] [PATCH v3 09/27] x86: ich-spi: Add Intel Tunnel Creek SPI controller support   Simon Glass
  • [U-Boot] [PATCH v3 10/27] x86: Initial import from Intel FSP release for Queensbay platform   Bin Meng
    • [U-Boot] [PATCH v3 10/27] x86: Initial import from Intel FSP release for Queensbay platform   Simon Glass
      • [U-Boot] [PATCH v3 10/27] x86: Initial import from Intel FSP release for Queensbay platform   Bin Meng
      • [U-Boot] [PATCH v3 10/27] x86: Initial import from Intel FSP release for Queensbay platform   Bin Meng
      • [U-Boot] [PATCH v3 10/27] x86: Initial import from Intel FSP release for Queensbay platform   Simon Glass
  • [U-Boot] [PATCH v3 11/27] x86: queensbay: Adapt FSP support codes   Bin Meng
    • [U-Boot] [PATCH v3 11/27] x86: queensbay: Adapt FSP support codes   Simon Glass
      • [U-Boot] [PATCH v3 11/27] x86: queensbay: Adapt FSP support codes   Bin Meng
      • [U-Boot] [PATCH v3 11/27] x86: queensbay: Adapt FSP support codes   Bin Meng
      • [U-Boot] [PATCH v3 11/27] x86: queensbay: Adapt FSP support codes   Simon Glass
  • [U-Boot] [PATCH v3 12/27] x86: Add post failure codes for bist and car   Bin Meng
    • [U-Boot] [PATCH v3 12/27] x86: Add post failure codes for bist and car   Simon Glass
  • [U-Boot] [PATCH v3 13/27] x86: Support Intel FSP initialization path in start.S   Bin Meng
    • [U-Boot] [PATCH v3 13/27] x86: Support Intel FSP initialization path in start.S   Simon Glass
  • [U-Boot] [PATCH v3 14/27] x86: Add a simple command to show FSP HOB information   Bin Meng
    • [U-Boot] [PATCH v3 14/27] x86: Add a simple command to show FSP HOB information   Simon Glass
  • [U-Boot] [PATCH v3 15/27] x86: Integrate Tunnel Creek processor microcode   Bin Meng
  • [U-Boot] [PATCH v3 16/27] x86: Add basic support to queensbay platform and crownbay board   Bin Meng
  • [U-Boot] [PATCH v3 17/27] x86: ich6-gpio: Add Intel Tunnel Creek GPIO support   Bin Meng
  • [U-Boot] [PATCH v3 18/27] x86: Enable the queensbay cpu directory build   Bin Meng
  • [U-Boot] [PATCH v3 19/27] x86: Add queensbay and crownbay Kconfig files   Bin Meng
  • [U-Boot] [PATCH v3 20/27] x86: Add crownbay defconfig and config.h   Bin Meng
  • [U-Boot] [PATCH v3 21/27] x86: Use consistent name XXX_ADDR for binary blob flash address   Bin Meng
  • [U-Boot] [PATCH v3 22/27] x86: Include FSP and CMC binary in the u-boot.rom build rules   Bin Meng
  • [U-Boot] [PATCH v3 23/27] x86: crownbay: Add SPI flash support   Bin Meng
    • [U-Boot] [PATCH v3 23/27] x86: crownbay: Add SPI flash support   Jagan Teki
      • [U-Boot] [PATCH v3 23/27] x86: crownbay: Add SPI flash support   Bin Meng
      • [U-Boot] [PATCH v3 23/27] x86: crownbay: Add SPI flash support   Jagan Teki
  • [U-Boot] [PATCH v3 24/27] x86: crownbay: Enable Intel E1000 NIC support   Bin Meng
  • [U-Boot] [PATCH v3 25/27] x86: crownbay: Add SDHCI support   Bin Meng
  • [U-Boot] [PATCH v3 26/27] x86: Rename coreboot-serial to x86-serial   Bin Meng
  • [U-Boot] [PATCH v3 27/27] x86: Add a README.x86 for U-Boot on x86 support   Bin Meng
• [U-Boot] [PATCH] imx SPL: enable boot from eMMC boot partitions.   Pierre Aubert
  • [U-Boot] [PATCH] imx SPL: enable boot from eMMC boot partitions.   Stefano Babic
• [U-Boot] [PATCH v2 0/6] sf: SST changes, Byte program   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v2 3/6] spi: sf: Support byte program for sst spi flash   Jagannadha Sutradharudu Teki
    • [U-Boot] [PATCH v2 3/6] spi: sf: Support byte program for sst spi flash   Simon Glass
  • [U-Boot] [PATCH v2 4/6] sf: Enable byte program support   Jagannadha Sutradharudu Teki
    • [U-Boot] [PATCH v2 4/6] sf: Enable byte program support   Simon Glass
  • [U-Boot] [PATCH v2 5/6] x86: ich-spi: Set the rx operation mode for ich 7   Jagannadha Sutradharudu Teki
    • [U-Boot] [PATCH v2 5/6] x86: ich-spi: Set the rx operation mode for ich 7   Simon Glass
  • [U-Boot] [PATCH v2 6/6] x86: ich-spi: Set the tx operation mode for ich 7   Jagannadha Sutradharudu Teki
    • [U-Boot] [PATCH v2 6/6] x86: ich-spi: Set the tx operation mode for ich 7   Simon Glass
  • [U-Boot] [PATCH v2 0/6] sf: SST changes, Byte program   Jagan Teki
    • [U-Boot] [PATCH v2 0/6] sf: SST changes, Byte program   Bin Meng
    • [U-Boot] [PATCH v2 0/6] sf: SST changes, Byte program   Simon Glass
• [U-Boot] [PATCH v2 1/6] sf: Fix look for the fastest read command   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v2 1/6] sf: Fix look for the fastest read command   Simon Glass
• [U-Boot] [PATCH v2 2/6] spi: Fix flag collision for SST_WP   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v2 2/6] spi: Fix flag collision for SST_WP   Simon Glass
• [U-Boot] [PATCH] mx51evk: Fix MX51EVK_USB_CLK_EN_B definition   Fabio Estevam
  • [U-Boot] [PATCH] mx51evk: Fix MX51EVK_USB_CLK_EN_B definition   Stefano Babic
• [U-Boot] [PATCH resend 0/2] config_distro_bootcmd: Avoid usb getting scanned tw   Hans de Goede
  • [U-Boot] [PATCH resend 1/2] config_distro_bootcmd.h: Allow user to indicate that usb is inited in preboot   Hans de Goede
    • [U-Boot] [PATCH resend 1/2] config_distro_bootcmd.h: Allow user to indicate that usb is inited in preboot   Stephen Warren
    • [U-Boot] [U-Boot, resend, 1/2] config_distro_bootcmd.h: Allow user to indicate that usb is inited in preboot   Hans de Goede
  • [U-Boot] [PATCH resend 2/2] sunxi: Avoid usb getting scanned twice when using usb kbd + usb boot   Hans de Goede
    • [U-Boot] [PATCH resend 2/2] sunxi: Avoid usb getting scanned twice when using usb kbd + usb boot   Ian Campbell
• [U-Boot] [PATCH 1/3] arm: semihosting: staticize internal functions   Steve Rae
• [U-Boot] [PATCH] Fix hash verification   picmaster at mail.bg
  • [U-Boot] [PATCH] Fix hash verification   Simon Glass
    • [U-Boot] [PATCH] Fix hash verification   Nikolay Dimitrov
      • [U-Boot] [PATCH] Fix hash verification   Nikolay Dimitrov
      • [U-Boot] [PATCH] Fix hash verification   Simon Glass
  • [U-Boot] Fix hash verification   Tom Rini
• [U-Boot] [PATCH 2/3] arm: semihosting: fix up compile bugs   Steve Rae
• [U-Boot] [PATCH 3/3] arm: semihosting: get rid of forward declarations   Steve Rae
• [U-Boot] [PATCH] embestmx6boards: Increase boot delay to 3s   picmaster at mail.bg
  • [U-Boot] [PATCH] embestmx6boards: Increase boot delay to 3s   Eric Bénard
    • [U-Boot] [PATCH] embestmx6boards: Increase boot delay to 3s   Michael Trimarchi
      • [U-Boot] [PATCH] embestmx6boards: Increase boot delay to 3s   Nikolay Dimitrov
      • [U-Boot] [PATCH] embestmx6boards: Increase boot delay to 3s   Michael Trimarchi
      • [U-Boot] [PATCH] embestmx6boards: Increase boot delay to 3s   Nikolay Dimitrov
    • [U-Boot] [PATCH] embestmx6boards: Increase boot delay to 3s   Nikolay Dimitrov
      • [U-Boot] [PATCH] embestmx6boards: Increase boot delay to 3s   Eric Bénard
      • [U-Boot] [PATCH] embestmx6boards: Increase boot delay to 3s   Iain Paton
      • [U-Boot] [PATCH] embestmx6boards: Increase boot delay to 3s   Michael Trimarchi
      • [U-Boot] [PATCH] embestmx6boards: Increase boot delay to 3s   Nikolay Dimitrov
      • [U-Boot] [PATCH] embestmx6boards: Increase boot delay to 3s   Eric Bénard
      • [U-Boot] [PATCH] embestmx6boards: Increase boot delay to 3s   Iain Paton
• [U-Boot] [PATCH] mmc: rmobile: Add SDHC support for Renesas rmobile ARM SoC   Pantelis Antoniou
  • [U-Boot] [PATCH] mmc: rmobile: Add SDHC support for Renesas rmobile ARM SoC   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] mmc: Cosmetic fix for nicer, aligned device list printout   Pantelis Antoniou
• [U-Boot] [PATCH ] MMC: fix user capacity for partitioned eMMC card   Pantelis Antoniou
• [U-Boot] [PATCH ] MMC: add MMC_VERSION_5_0   Pantelis Antoniou
• [U-Boot] [PATCH] mmc: exynos_dw-mmc: change debug message   Pantelis Antoniou
• [U-Boot] Pull request: u-boot-mmc 12122014   Pantelis Antoniou
  • [U-Boot] Pull request: u-boot-mmc 12122014   Tom Rini
• [U-Boot] [PATCH v2 4/5] sun6i: Drop some "unknown magic" from dram init   Siarhei Siamashka
  • [U-Boot] [PATCH v2 4/5] sun6i: Drop some "unknown magic" from dram init   Hans de Goede
• [U-Boot] [PATCH v2 3/5] sun6i: dram: Do not try to initialize a second dram chan on A31s   Siarhei Siamashka
  • [U-Boot] [PATCH v2 3/5] sun6i: dram: Do not try to initialize a second dram chan on A31s   Hans de Goede
    • [U-Boot] [PATCH v2 3/5] sun6i: dram: Do not try to initialize a second dram chan on A31s   Siarhei Siamashka
• [U-Boot] [PATCH v2 1/5] sun6i: Make dram clk and zq value Kconfig options   Siarhei Siamashka
• [U-Boot] [PATCH] qe/deep-sleep: add qe deep-sleep for generic board   York Sun
  • [U-Boot] [PATCH] qe/deep-sleep: add qe deep-sleep for generic board   qiang.zhao at freescale.com
  • [U-Boot] [PATCH] qe/deep-sleep: add qe deep-sleep for generic board   qiang.zhao at freescale.com
• [U-Boot] [PATCH] spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS, if available   Robert Nelson
  • [U-Boot] [PATCH] spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS, if available   Guillaume Gardet
    • [U-Boot] [PATCH] spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS, if available   Guillaume Gardet
      • [U-Boot] [PATCH] spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS, if available   Guillaume Gardet
• [U-Boot] [PATCH v4 1/2] disk: part_efi: move code to static functions   Steve Rae
  • [U-Boot] [PATCH v4 2/2] fastboot: handle flash write to GPT partitions   Steve Rae
    • [U-Boot] [PATCH v4 2/2] fastboot: handle flash write to GPT partitions   Lukasz Majewski
  • [U-Boot] [PATCH v4 1/2] disk: part_efi: move code to static functions   Lukasz Majewski
• [U-Boot] Fastboot and MUSB driver on OMAP3   Paul Kocialkowski
  • [U-Boot] Fastboot and MUSB driver on OMAP3   Paul Kocialkowski
    • [U-Boot] Fastboot and MUSB driver on OMAP3   Paul Kocialkowski
• [U-Boot] [PATCH] sunxi: Align PSCI stack calculation to comment   Ian Campbell
  • [U-Boot] [PATCH] sunxi: Align PSCI stack calculation to comment   Hans de Goede
  • [U-Boot] [PATCH] sunxi: Align PSCI stack calculation to comment   Jan Kiszka
• [U-Boot] uBoot services   Gary Partis
  • [U-Boot] uBoot services   Jeroen Hofstee
• [U-Boot] [PATCH v3 1/6] MVEBUMMC : Change copyright date   Gérald Kerma
• [U-Boot] [PATCH v3 2/6] MVEBUMMC : Speed up access time   Gérald Kerma
• [U-Boot] [PATCH v3 3/6] MVEBUMMC : FIX debug strings   Gérald Kerma
• [U-Boot] [PATCH v3 4/6] MVEBUMMC : REMOVE unnecessary delays   Gérald Kerma
• [U-Boot] [PATCH v3 5/6] MVEBUMMC : CLEAN code   Gérald Kerma
• [U-Boot] [PATCH v3 6/6] MVEBUMMC : REMOVE unnecessary delay from init   Gérald Kerma
• [U-Boot] [PATCH v1 0/5] SHEEVAPLUG : REFRESH 201412   Gérald Kerma
  • [U-Boot] [PATCH v1 2/5] SHEEVAPLUG : FIX multiple defines   Gérald Kerma
  • [U-Boot] [PATCH v1 3/5] SHEEVAPLUG : ADD generic board define   Gérald Kerma
  • [U-Boot] [PATCH v1 4/5] SHEEVAPLUG : ADD CONFIG_CMD_FAT   Gérald Kerma
  • [U-Boot] [PATCH v1 5/5] SHEEVAPLUG : ADD FDT support   Gérald Kerma
  • [U-Boot] [PATCH v2 0/6] SHEEVAPLUG : REFRESH 201412   Gérald Kerma
    • [U-Boot] [PATCH v2 1/6] SHEEVAPLUG : FIX typo   Gérald Kerma
    • [U-Boot] [PATCH v2 2/6] SHEEVAPLUG : FIX multiple defines   Gérald Kerma
    • [U-Boot] [PATCH v2 3/6] SHEEVAPLUG : ADD generic board define   Gérald Kerma
    • [U-Boot] [PATCH v2 5/6] SHEEVAPLUG : ADD FDT support   Gérald Kerma
    • [U-Boot] [PATCH v2 6/6] SHEEVAPLUG : REDEFINE MTDPARTS   Gérald Kerma
  • [U-Boot] [PATCH v3 0/6] SHEEVAPLUG : REFRESH 201412   Gérald Kerma
    • [U-Boot] [PATCH v3 1/6] SHEEVAPLUG : FIX typo   Gérald Kerma
    • [U-Boot] [PATCH v3 2/6] SHEEVAPLUG : FIX multiple defines   Gérald Kerma
• [U-Boot] [PATCH v1 1/5] SHEEVAPLUG : FIX typo   Gérald Kerma
• [U-Boot] [PATCH v1 0/2] SHEEVAPLUG : OPENWRT READY   Gérald Kerma
• [U-Boot] [PATCH v1 1/2] SHEEVAPLUG : REDEFINE MTDPARTS   Gérald Kerma
• [U-Boot] [PATCH v1 2/2] SHEEVAPLUG : REDEFINE ENV   Gérald Kerma
• [U-Boot] [PATCH v2 4/6] SHEEVAPLUG : ADD CONFIG_CMD_FAT   Gérald Kerma
• [U-Boot] [PATCH] x86: Clean up the FSP support codes   Bin Meng
  • [U-Boot] [PATCH] x86: Clean up the FSP support codes   Simon Glass
    • [U-Boot] [PATCH] x86: Clean up the FSP support codes   Bin Meng
• [U-Boot] [PATCH] x86: ifdtool: Separate out filenames for -D and -i   Simon Glass
  • [U-Boot] [PATCH] x86: ifdtool: Separate out filenames for -D and -i   Simon Glass
• [U-Boot] Build problem with crownbay   Simon Glass
  • [U-Boot] Build problem with crownbay   Bin Meng
    • [U-Boot] Build problem with crownbay   Simon Glass
      • [U-Boot] Build problem with crownbay   Simon Glass
      • [U-Boot] Build problem with crownbay   Bin Meng
      • [U-Boot] Build problem with crownbay   Simon Glass
      • [U-Boot] Build problem with crownbay   Bin Meng
      • [U-Boot] Build problem with crownbay   Simon Glass
      • [U-Boot] Build problem with crownbay   Bin Meng
      • [U-Boot] Build problem with crownbay   Simon Glass
      • [U-Boot] Build problem with crownbay   Bin Meng
• [U-Boot] [PATCH] ARM: sunxi: Add MAINTAINERS entry for Merrii Hummingbird A31   Chen-Yu Tsai
  • [U-Boot] [PATCH] ARM: sunxi: Add MAINTAINERS entry for Merrii Hummingbird A31   Ian Campbell
• [U-Boot] [PATCH] ARM: sunxi: Fix board target name in Hummingbird_A31_defconfig   Chen-Yu Tsai
  • [U-Boot] [PATCH] ARM: sunxi: Fix board target name in Hummingbird_A31_defconfig   Ian Campbell
• [U-Boot] [PATCH 1/2] embestmx6boards: convert to use config_distro_defaults.h   Iain Paton
  • [U-Boot] [PATCH 1/2] embestmx6boards: convert to use config_distro_defaults.h   Nikolay Dimitrov
  • [U-Boot] [PATCH 1/2] embestmx6boards: convert to use config_distro_defaults.h   Stefano Babic
• [U-Boot] [PATCH 2/2] embestmx6boards: convert to use config_distro_bootcmd.h   Iain Paton
  • [U-Boot] [PATCH 2/2] embestmx6boards: convert to use config_distro_bootcmd.h   Nikolay Dimitrov
    • [U-Boot] [PATCH 2/2] embestmx6boards: convert to use config_distro_bootcmd.h   Stefano Babic
  • [U-Boot] [PATCH 2/2] embestmx6boards: convert to use config_distro_bootcmd.h   Stefano Babic
• [U-Boot] [PATCH] allow config_distro_bootcmd to pass uuid to extlinux.conf   Iain Paton
  • [U-Boot] [PATCH] allow config_distro_bootcmd to pass uuid to extlinux.conf   Stephen Warren
• [U-Boot] [PATCH v2 5/5] sun6i: Add new CSQ_CS908 board   Ian Campbell
  • [U-Boot] [PATCH v2 5/5] sun6i: Add new CSQ_CS908 board   Hans de Goede
    • [U-Boot] [PATCH v2 5/5] sun6i: Add new CSQ_CS908 board   Ian Campbell
• [U-Boot] [PATCH] arm: mxs: olinuxino: move DRAM config tuning to SPL   Jan Luebbe
  • [U-Boot] [PATCH] arm: mxs: olinuxino: move DRAM config tuning to SPL   Stefano Babic
• [U-Boot] [PATCH] arm: mxs: olinuxino: move DRAM config tuning to SPL   Marek Vasut
• [U-Boot] [PATCH] disk/part.c: use unsigned format when printing capacity   Pavel Machek
• [U-Boot] [PATCH] allow config_distro_bootcmd to pass uuid to extlinux.conf   Iain Paton
  • [U-Boot] [PATCH] allow config_distro_bootcmd to pass uuid to extlinux.conf   Stephen Warren
    • [U-Boot] [PATCH] allow config_distro_bootcmd to pass uuid to extlinux.conf   Hans de Goede
• [U-Boot] [PATCH 0/8] x86: Support microcode in a single place   Simon Glass
  • [U-Boot] [PATCH 1/8] x86: Add a script to process Intel microcode files   Simon Glass
    • [U-Boot] [PATCH 1/8] x86: Add a script to process Intel microcode files   Simon Glass
    • [U-Boot] [PATCH 1/8] x86: Add a script to process Intel microcode files   Bin Meng
      • [U-Boot] [PATCH 1/8] x86: Add a script to process Intel microcode files   Simon Glass
  • [U-Boot] [PATCH 2/8] x86: ifdtool: Correct a debug() missing parameter   Simon Glass
    • [U-Boot] [PATCH 2/8] x86: ifdtool: Correct a debug() missing parameter   Bin Meng
      • [U-Boot] [PATCH 2/8] x86: ifdtool: Correct a debug() missing parameter   Simon Glass
  • [U-Boot] [PATCH 3/8] x86: ifdtool: Display filename when file errors are reported   Simon Glass
    • [U-Boot] [PATCH 3/8] x86: ifdtool: Display filename when file errors are reported   Bin Meng
      • [U-Boot] [PATCH 3/8] x86: ifdtool: Display filename when file errors are reported   Simon Glass
  • [U-Boot] [PATCH 4/8] x86: ifdtool: Use a structure for the file/address list   Simon Glass
    • [U-Boot] [PATCH 4/8] x86: ifdtool: Use a structure for the file/address list   Bin Meng
      • [U-Boot] [PATCH 4/8] x86: ifdtool: Use a structure for the file/address list   Simon Glass
  • [U-Boot] [PATCH 5/8] x86: ifdtool: Add support for early microcode access   Simon Glass
    • [U-Boot] [PATCH 5/8] x86: ifdtool: Add support for early microcode access   Bin Meng
  • [U-Boot] [PATCH 6/8] x86: Move microcode updates into a separate directory   Simon Glass
    • [U-Boot] [PATCH 6/8] x86: Move microcode updates into a separate directory   Bin Meng
  • [U-Boot] [PATCH 7/8] x86: ivybridge: Update the microcode   Simon Glass
  • [U-Boot] [PATCH 8/8] x86: Convert microcode format to device-tree-only   Simon Glass
    • [U-Boot] [PATCH 8/8] x86: Convert microcode format to device-tree-only   Bin Meng
      • [U-Boot] [PATCH 8/8] x86: Convert microcode format to device-tree-only   Simon Glass
    • [U-Boot] [PATCH 8/8] x86: Convert microcode format to device-tree-only   Bin Meng
      • [U-Boot] [PATCH 8/8] x86: Convert microcode format to device-tree-only   Bin Meng
    • [U-Boot] [PATCH 8/8] x86: Convert microcode format to device-tree-only   Bin Meng
• [U-Boot] [PATCH v2 0/13] ARM: atmel: enable spl for sama5d4 related boards   Bo Shen
  • [U-Boot] [PATCH v2 01/13] ARM: atmel: clock: make it possible to configure HMX32   Bo Shen
  • [U-Boot] [PATCH v2 02/13] ARM: atmel: sama5: add bus matrix header file   Bo Shen
  • [U-Boot] [PATCH v2 03/13] ARM: atmel: sama5: add sfr register header file   Bo Shen
  • [U-Boot] [PATCH v2 04/13] ARM: atmel: spl: add weak bus matrix init function   Bo Shen
  • [U-Boot] [PATCH v2 05/13] ARM: atmel: spl: add saic to aic redirect function   Bo Shen
  • [U-Boot] [PATCH v2 06/13] ARM: atmel: spl: can not disable osc for sama5d4   Bo Shen
  • [U-Boot] [PATCH v2 07/13] ARM: atmel: sama5d4: add matrix1 base addr definition   Bo Shen
  • [U-Boot] [PATCH v2 08/13] ARM: atmel: sama5d4: add bus matrix init function   Bo Shen
  • [U-Boot] [PATCH v2 09/13] ARM: atmel: sama5d4: add interrupt redirec function   Bo Shen
  • [U-Boot] [PATCH v2 10/13] ARM: atmel: sama5d4: can access DDR in interleave mode   Bo Shen
  • [U-Boot] [PATCH v2 11/13] ARM: atmel: sama5d4: build related file when enable SPL   Bo Shen
  • [U-Boot] [PATCH v2 12/13] ARM: atmel: sama5d4ek: enable SPL support   Bo Shen
  • [U-Boot] [PATCH v2 13/13] ARM: atmel: sama5d4_xplained: enable spl support   Bo Shen
• [U-Boot] [PATCH] crypto/fsl: Add fixup for crypto node   Ruchika Gupta
• [U-Boot] [PATCH] powerpc/913x: Add config flag for bootdelay   Harninder Rai
  • [U-Boot] [PATCH] powerpc/913x: Add config flag for bootdelay   York Sun
    • [U-Boot] [PATCH] powerpc/913x: Add config flag for bootdelay   Harninder Rai
• [U-Boot] [PATCH] qe/deep-sleep: modify qe deep-sleep for generic board   Zhao Qiang
  • [U-Boot] [PATCH] qe/deep-sleep: modify qe deep-sleep for generic board   York Sun
  • [U-Boot] [PATCH] qe/deep-sleep: modify qe deep-sleep for generic board   York Sun
• [U-Boot] [PATCH v3 00/18] Support for eMMC partitioning and related fixes   Diego Santa Cruz
  • [U-Boot] [PATCH v3 01/18] mmc: show hardware partition sizes in mmcinfo output   Diego Santa Cruz
  • [U-Boot] [PATCH v3 02/18] mmc: extend mmcinfo to show enhanced partition attribute   Diego Santa Cruz
  • [U-Boot] [PATCH v3 03/18] mmc: make eMMC general purpose partition numbering match spec   Diego Santa Cruz
  • [U-Boot] [PATCH v3 04/18] mmc: skip mmcinfo partition info processing for eMMC < 4.41   Diego Santa Cruz
  • [U-Boot] [PATCH v3 05/18] mmc: incomplete test to switch to high-capacity group size definitions   Diego Santa Cruz
  • [U-Boot] [PATCH v3 06/18] mmc: computation of eMMC GP partition size was missing 512 KiB factor   Diego Santa Cruz
  • [U-Boot] [PATCH v3 07/18] mmc: read the size of eMMC enhanced user data area   Diego Santa Cruz
  • [U-Boot] [PATCH v3 08/18] mmc: display size and start of eMMC enhanced user data area in mmcinfo   Diego Santa Cruz
  • [U-Boot] [PATCH v3 09/18] mmc: fix erase_grp_size computation with high-capacity size definition   Diego Santa Cruz
  • [U-Boot] [PATCH v3 10/18] mmc: read the high capacity WP group size for eMMC   Diego Santa Cruz
  • [U-Boot] [PATCH v3 11/18] mmc: show the erase group size and HC WP group size in mmcinfo output   Diego Santa Cruz
  • [U-Boot] [PATCH v3 12/18] mmc: eMMC partitioning data is not effective till partitioning completed   Diego Santa Cruz
  • [U-Boot] [PATCH v3 13/18] mmc: the ext_csd data may be used during init even if reading failed   Diego Santa Cruz
  • [U-Boot] [PATCH v3 14/18] mmc: add API to do eMMC hardware partitioning   Diego Santa Cruz
  • [U-Boot] [PATCH v3 15/18] mmc: add mmc hwpartition sub-command to do eMMC hardware partitioning   Diego Santa Cruz
  • [U-Boot] [PATCH v3 16/18] mmc: extend the mmc hardware partitioning API with write reliability   Diego Santa Cruz
  • [U-Boot] [PATCH v3 17/18] mmc: extend the mmc hwpartition sub-command to change write reliability   Diego Santa Cruz
  • [U-Boot] [PATCH v3 18/18] mmc: extend mmcinfo output to show partition write reliability settings   Diego Santa Cruz
• [U-Boot] [Patch V2 2/3] gadget: f_thor: check pointers before use in download_tail()   Przemyslaw Marczak
  • [U-Boot] [Patch V2 2/3] gadget: f_thor: check pointers before use in download_tail()   Lukasz Majewski
• [U-Boot] [PATCH 1/3 v2] arm: semihosting: staticize internal functions   Linus Walleij
  • [U-Boot] [U-Boot, 1/3, v2] arm: semihosting: staticize internal functions   Tom Rini
• [U-Boot] [PATCH 2/3 v2] arm: semihosting: fix up compile bugs   Linus Walleij
  • [U-Boot] [U-Boot,2/3,v2] arm: semihosting: fix up compile bugs   Tom Rini
• [U-Boot] [PATCH 3/3 v2] arm: semihosting: get rid of forward declarations   Linus Walleij
  • [U-Boot] [U-Boot, 3/3, v2] arm: semihosting: get rid of forward declarations   Tom Rini
• [U-Boot] [PATCH] USB: gadget: atmel_usba_udc: fix transfer hang issue   Bo Shen
  • [U-Boot] [PATCH] USB: gadget: atmel_usba_udc: fix transfer hang issue   Marek Vasut
• [U-Boot] [PATCH 0/2] sun7i: PSCI enhancements   Jan Kiszka
  • [U-Boot] [PATCH 1/2] sun7i: Add support for taking CPUs offline via PSCI   Jan Kiszka
    • [U-Boot] [PATCH 1/2] sun7i: Add support for taking CPUs offline via PSCI   Ian Campbell
      • [U-Boot] [PATCH 1/2] sun7i: Add support for taking CPUs offline via PSCI   Jan Kiszka
  • [U-Boot] [PATCH 2/2] sun7i: Add PSCI v0.2 support   Jan Kiszka
    • [U-Boot] [PATCH 2/2] sun7i: Add PSCI v0.2 support   Hans de Goede
      • [U-Boot] [PATCH 2/2] sun7i: Add PSCI v0.2 support   Jan Kiszka
      • [U-Boot] [PATCH 2/2] sun7i: Add PSCI v0.2 support   Hans de Goede
    • [U-Boot] [PATCH 2/2] sun7i: Add PSCI v0.2 support   Ian Campbell
      • [U-Boot] [PATCH 2/2] sun7i: Add PSCI v0.2 support   Jan Kiszka
• [U-Boot] [PATCH 0/5] arm: omap: reset sata on OS boot   Dmitry Lifshitz
• [U-Boot] [PATCH 1/5] ahci: introduce ahci_reset()   Dmitry Lifshitz
  • [U-Boot] [PATCH 1/5] ahci: introduce ahci_reset()   Tom Rini
• [U-Boot] [PATCH 2/5] ahci-plat: provide a weak scsi_bus_reset() hook   Dmitry Lifshitz
  • [U-Boot] [PATCH 2/5] ahci-plat: provide a weak scsi_bus_reset() hook   Tom Rini
• [U-Boot] [PATCH 3/5] OMAP5+: sata/scsi: implement scsi_bus_reset()   Dmitry Lifshitz
  • [U-Boot] [PATCH 3/5] OMAP5+: sata/scsi: implement scsi_bus_reset()   Tom Rini
• [U-Boot] [PATCH 4/5] arm: omap: reset sata on boot   Dmitry Lifshitz
  • [U-Boot] [PATCH 4/5] arm: omap: reset sata on boot   Tom Rini
    • [U-Boot] [PATCH 4/5] arm: omap: reset sata on boot   Dmitry Lifshitz
• [U-Boot] [PATCH 5/5] omap5: cm-t54: add sata support   Dmitry Lifshitz
  • [U-Boot] [PATCH 5/5] omap5: cm-t54: add sata support   Tom Rini
• [U-Boot] [PATCH 0/19] powerpc: Introduce device tree control and driver model   Simon Glass
  • [U-Boot] [PATCH 01/19] Introduce board_init_f_mem() to handle early memory layout   Simon Glass
  • [U-Boot] [PATCH 02/19] powerpc: Permit device tree control of U-Boot (CONFIG_OF_CONTROL)   Simon Glass
  • [U-Boot] [PATCH 03/19] powerpc: ppc4xx: canyonlands: config: Tidy up CONFIGs and config.mk   Simon Glass
  • [U-Boot] [PATCH 04/19] powerpc: ppc4xx: Move CANYONLANDS/GLACIER/ARCHES to Kconfig   Simon Glass
  • [U-Boot] [PATCH 05/19] powerpc: ppc4xx: Add ramboot config for glacier   Simon Glass
  • [U-Boot] [PATCH 06/19] WIP: powerpc: ppc4xx: Somehow BSS is not cleared in RAMBOOT case   Simon Glass
  • [U-Boot] [PATCH 07/19] powerpc: ppc4xx: canyonlands: Move to generic board   Simon Glass
  • [U-Boot] [PATCH 08/19] powerpc: ppc4xx: dts: Bring in canyonlands device tree files   Simon Glass
  • [U-Boot] [PATCH 09/19] powerpc: ppc4xx: Call board_init_f_mem() for generic board   Simon Glass
  • [U-Boot] [PATCH 10/19] powerpc: ppc4xx: Add a gpio.h header file   Simon Glass
  • [U-Boot] [PATCH 11/19] powerpc: ppc4xx: Allow the end of u-boot.bin to be found   Simon Glass
  • [U-Boot] [PATCH 12/19] powerpc: ppc4xx: Use CONFIG_OF_CONTROL for canyonlands boards   Simon Glass
  • [U-Boot] [PATCH 13/19] ppc: amcc: Omit unneeded ns16550 CONFIG if using driver model   Simon Glass
  • [U-Boot] [PATCH 14/19] powerpc: Add serial driver for driver model   Simon Glass
  • [U-Boot] [PATCH 15/19] dm: powerpc: ppc4xx: Move glacier to use driver model for serial   Simon Glass
  • [U-Boot] [PATCH 16/19] powerpc: Add linkage.h file   Simon Glass
  • [U-Boot] [PATCH 17/19] serial: Support an early UART for debugging   Simon Glass
    • [U-Boot] [PATCH 17/19] serial: Support an early UART for debugging   Masahiro Yamada
      • [U-Boot] [PATCH 17/19] serial: Support an early UART for debugging   Simon Glass
  • [U-Boot] [PATCH 18/19] serial: ns16550: Support debug UART   Simon Glass
    • [U-Boot] [PATCH 18/19] serial: ns16550: Support debug UART   Masahiro Yamada
      • [U-Boot] [PATCH 18/19] serial: ns16550: Support debug UART   Simon Glass
  • [U-Boot] [PATCH 19/19] powerpc: ppc4xx: Provide early debug UART defaults   Simon Glass
• [U-Boot] [PATCH 0/26] Start removing non-generic boards   Masahiro Yamada
  • [U-Boot] [PATCH 01/26] mpc8xx: remove FPS{850, 860}L, NSCU, SM850, TK885D, virtlab2 support   Masahiro Yamada
  • [U-Boot] [PATCH 13/26] powerpc: remove cogent_8xx, cogent_mpc8260 board support   Masahiro Yamada
  • [U-Boot] [PATCH 14/26] mpc8260: remove sacsng board support   Masahiro Yamada
  • [U-Boot] [PATCH 24/26] mpc8260: remove CPU86, CPU87 board support   Masahiro Yamada
  • [U-Boot] [PATCH 26/26] powerpc: mpc824x: remove MPC824X cpu support   Masahiro Yamada
    • [U-Boot] [PATCH 26/26] powerpc: mpc824x: remove MPC824X cpu support   York Sun
• [U-Boot] [PATCH 02/26] powerpc: manroland: remove uc100, uc101, mucmc52, hmi1001 support   Masahiro Yamada
• [U-Boot] [PATCH 03/26] mpc8xx: remove ELPT860 board support   Masahiro Yamada
• [U-Boot] [PATCH 04/26] mpc8xx: remove KUP4X, KUP4K board support   Masahiro Yamada
• [U-Boot] [PATCH 05/26] mpc8xx: remove SPD823TS board support   Masahiro Yamada
• [U-Boot] [PATCH 06/26] mpc8xx: remove RRvision board support   Masahiro Yamada
• [U-Boot] [PATCH 07/26] mpc8xx: remove R360MPI board support   Masahiro Yamada
• [U-Boot] [PATCH 08/26] mpc8xx: remove NETVIA board support   Masahiro Yamada
• [U-Boot] [PATCH 09/26] mpc8xx: remove lwmon board support   Masahiro Yamada
• [U-Boot] [PATCH 10/26] mpc8xx: remove IVMS8, IVML24 board support   Masahiro Yamada
• [U-Boot] [PATCH 11/26] mpc8xx: remove IP860 board support   Masahiro Yamada
• [U-Boot] [PATCH 12/26] mpc8xx: remove ESTEEM192E board support   Masahiro Yamada
• [U-Boot] [PATCH 15/26] mpc8260: remove ppmc8260 board support   Masahiro Yamada
• [U-Boot] [PATCH 16/26] mpc8260: remove ep8260 board support   Masahiro Yamada
• [U-Boot] [PATCH 17/26] mpc8260: remove VoVPN-GW board support   Masahiro Yamada
• [U-Boot] [PATCH 18/26] mpc8260: remove MPC8266ADS board support   Masahiro Yamada
• [U-Boot] [PATCH 19/26] mpc8260: remove PM825, PM826, PM828 board support   Masahiro Yamada
• [U-Boot] [PATCH 20/26] mpc8260: remove muas3001 board support   Masahiro Yamada
• [U-Boot] [PATCH 21/26] mpc8260: remove IPHASE4539 board support   Masahiro Yamada
• [U-Boot] [PATCH 22/26] mpc8260: remove gw8260 board support   Masahiro Yamada
• [U-Boot] [PATCH 23/26] mpc8260: remove ep82xxm board support   Masahiro Yamada
• [U-Boot] [PATCH 25/26] mpc8260: remove atc board support   Masahiro Yamada
• [U-Boot] [PATCH v2] x86: Clean up the FSP support codes   Bin Meng
  • [U-Boot] [PATCH v2] x86: Clean up the FSP support codes   Simon Glass
    • [U-Boot] [PATCH v2] x86: Clean up the FSP support codes   Bin Meng
      • [U-Boot] [PATCH v2] x86: Clean up the FSP support codes   Simon Glass
      • [U-Boot] [PATCH v2] x86: Clean up the FSP support codes   Bin Meng
      • [U-Boot] [PATCH v2] x86: Clean up the FSP support codes   Simon Glass
• [U-Boot] [PATCH 01/10] net/fm: Fix error when FMAN MAC has no PHY   Codrin Ciubotariu
  • [U-Boot] [PATCH 05/10] arch/powerpc: Enable VSC9953 driver on T1040 and T1020   Codrin Ciubotariu
  • [U-Boot] [PATCH 06/10] board/T1040qds: Fix lane-to-slot mapping for SerDes protocol 0x89   Codrin Ciubotariu
  • [U-Boot] [PATCH 10/10] board/T1040rdb: Add VSC9953 support for T1040rdb board   Codrin Ciubotariu
• [U-Boot] [PATCH 02/10] arch/powerpc: Add SGMII support for the L2 Switch ports   Codrin Ciubotariu
• [U-Boot] [PATCH 03/10] net/fm: Enable FMAN ports if l2switch ports are connected over SGMII   Codrin Ciubotariu
• [U-Boot] [PATCH 04/10] net/vsc9953: Add driver for Vitesse VSC9953 L2 Switch IP   Codrin Ciubotariu
• [U-Boot] [PATCH 07/10] board/T1040qds: T1040 FMAN ports FM1 at DTSEC1 and FM1 at DTSEC2 have no PHYs   Codrin Ciubotariu
• [U-Boot] [PATCH 08/10] board/T104xrdb: T1040 FMAN ports FM1 at DTSEC1 and FM1 at DTSEC2 have no PHYs   Codrin Ciubotariu
• [U-Boot] [PATCH 09/10] board/T1040qds: Add VSC9953 support for T1040qds board   Codrin Ciubotariu
• [U-Boot] Falcon mode boot support   Andy Pont
• [U-Boot] [PATCH 04/10] Use uint64_t for time types   Masahiro YAMADA
  • [U-Boot] [PATCH 04/10] Use uint64_t for time types   Simon Glass
    • [U-Boot] [PATCH 04/10] Use uint64_t for time types   Masahiro YAMADA
      • [U-Boot] [PATCH 04/10] Use uint64_t for time types   Simon Glass
      • [U-Boot] [PATCH 04/10] Use uint64_t for time types   Masahiro Yamada
• [U-Boot] Falcon mode boot support   Tom Rini
  • [U-Boot] Falcon mode boot support   Andy Pont
• [U-Boot] [PATCH 08/10] scsi: Use correct printf() format string for uintptr_t   Masahiro YAMADA
• [U-Boot] [PATCH V4 2/3] usb: eth: add ASIX AX88179 DRIVER   Joe Hershberger
  • [U-Boot] [PATCH V4 2/3] usb: eth: add ASIX AX88179 DRIVER   René Griessl
    • [U-Boot] [PATCH V4 2/3] usb: eth: add ASIX AX88179 DRIVER   Marek Vasut
      • [U-Boot] [PATCH V4 2/3] usb: eth: add ASIX AX88179 DRIVER   Joe Hershberger
      • [U-Boot] [PATCH V4 2/3] usb: eth: add ASIX AX88179 DRIVER   Marek Vasut
      • [U-Boot] [PATCH V4 2/3] usb: eth: add ASIX AX88179 DRIVER   Joe Hershberger
      • [U-Boot] [PATCH V4 2/3] usb: eth: add ASIX AX88179 DRIVER   Marek Vasut
    • [U-Boot] [PATCH V4 2/3] usb: eth: add ASIX AX88179 DRIVER   Joe Hershberger
• [U-Boot] [PATCH v2] common/board_f.c: fix compile error when tracing disabled   Kevin Hilman
• [U-Boot] [PATCH v3] common/board_f.c: fix compile error when tracing disabled   Kevin Hilman
  • [U-Boot] [PATCH v3] common/board_f.c: fix compile error when tracing disabled   Simon Glass
• [U-Boot] Please pull u-boot-x86   Simon Glass
  • [U-Boot] Please pull u-boot-x86   Tom Rini
• [U-Boot] Falcon mode boot support   Tom Rini
  • [U-Boot] Falcon mode boot support   Andy Pont
• [U-Boot] [PATCH v2] arm: mx6: Change defines ENET_xxMHz to ENET_xxMHZ (no CamelCase)   Pavel Machek
• [U-Boot] [PATCH] cros-ec-keyboard: Synchronize DT binding from linux   Pavel Machek
  • [U-Boot] [PATCH] cros-ec-keyboard: Synchronize DT binding from linux   Sjoerd Simons
    • [U-Boot] [PATCH] cros-ec-keyboard: Synchronize DT binding from linux   Simon Glass
      • [U-Boot] [PATCH] cros-ec-keyboard: Synchronize DT binding from linux   Simon Glass
• [U-Boot] [PATCH v2 0/6] x86: Support microcode in a single place   Simon Glass
  • [U-Boot] [PATCH v2 1/6] x86: Add a script to process Intel microcode files   Simon Glass
    • [U-Boot] [PATCH v2 1/6] x86: Add a script to process Intel microcode files   Bin Meng
      • [U-Boot] [PATCH v2 1/6] x86: Add a script to process Intel microcode files   Simon Glass
  • [U-Boot] [PATCH v2 2/6] x86: ifdtool: Add support for early microcode access   Simon Glass
    • [U-Boot] [PATCH v2 2/6] x86: ifdtool: Add support for early microcode access   Bin Meng
      • [U-Boot] [PATCH v2 2/6] x86: ifdtool: Add support for early microcode access   Simon Glass
  • [U-Boot] [PATCH v2 3/6] x86: Move microcode updates into a separate directory   Simon Glass
    • [U-Boot] [PATCH v2 3/6] x86: Move microcode updates into a separate directory   Bin Meng
      • [U-Boot] [PATCH v2 3/6] x86: Move microcode updates into a separate directory   Simon Glass
  • [U-Boot] [PATCH v2 4/6] x86: ivybridge: Update the microcode   Simon Glass
    • [U-Boot] [PATCH v2 4/6] x86: ivybridge: Update the microcode   Simon Glass
  • [U-Boot] [PATCH v2 5/6] x86: Correct problems in the microcode loading   Simon Glass
    • [U-Boot] [PATCH v2 5/6] x86: Correct problems in the microcode loading   Bin Meng
      • [U-Boot] [PATCH v2 5/6] x86: Correct problems in the microcode loading   Simon Glass
      • [U-Boot] [PATCH v2 5/6] x86: Correct problems in the microcode loading   Simon Glass
  • [U-Boot] [PATCH v2 6/6] x86: Convert microcode format to device-tree-only   Simon Glass
    • [U-Boot] [PATCH v2 6/6] x86: Convert microcode format to device-tree-only   Bin Meng
      • [U-Boot] [PATCH v2 6/6] x86: Convert microcode format to device-tree-only   Simon Glass
      • [U-Boot] [PATCH v2 6/6] x86: Convert microcode format to device-tree-only   Bin Meng
• [U-Boot] [PATCH] powerpc/913x: Add config flag for bootdelay   York Sun
  • [U-Boot] [PATCH] powerpc/913x: Add config flag for bootdelay   Harninder Rai
    • [U-Boot] [PATCH] powerpc/913x: Add config flag for bootdelay   York Sun
      • [U-Boot] [PATCH] powerpc/913x: Add config flag for bootdelay   Harninder Rai
• [U-Boot] [PATCH] powerpc: SECURE BOOT- Add secure boot target for T1042RDB   Gaurav Rana
• [U-Boot] [PATCH v2] mtd: nand: revive "nand scrub" command   Masahiro Yamada
• [U-Boot] [PATCH] ls102xa: dcu: Add platform support for DCU on LS1021AQDS board   Xiubo Li
• [U-Boot] [PATCH] powerpc/t1024: add serdes protocol 0x40   Shengzhou Liu
• [U-Boot] [PATCH 1/1] powerpc/cm5200: migrate to generic board   David Büchi
• [U-Boot] [PATCH] spl: mmc: Fix raw boot mode (related to commit 4c5bbc2328a24f5e1ee990c9a9527e48e5fb3b5f)   Guillaume GARDET
  • [U-Boot] [PATCH] spl: mmc: Fix raw boot mode (related to commit 4c5bbc2328a24f5e1ee990c9a9527e48e5fb3b5f)   Robert Nelson
    • [U-Boot] [PATCH] spl: mmc: Fix raw boot mode (related to commit 4c5bbc2328a24f5e1ee990c9a9527e48e5fb3b5f)   Guillaume Gardet
      • [U-Boot] [PATCH] spl: mmc: Fix raw boot mode (related to commit 4c5bbc2328a24f5e1ee990c9a9527e48e5fb3b5f)   Robert Nelson
  • [U-Boot] [PATCH] spl: mmc: Fix raw boot mode (related to commit 4c5bbc2328a24f5e1ee990c9a9527e48e5fb3b5f)   Guillaume Gardet
• [U-Boot] [PATCH 1/2] image: bootm: Add OpenRTOS image type   Marek Vasut
  • [U-Boot] [PATCH 2/2] image: Enable OpenRTOS booting via fitImage   Marek Vasut
    • [U-Boot] [PATCH 2/2] image: Enable OpenRTOS booting via fitImage   Simon Glass
  • [U-Boot] [PATCH 1/2] image: bootm: Add OpenRTOS image type   Simon Glass
    • [U-Boot] [PATCH 1/2] image: bootm: Add OpenRTOS image type   Marek Vasut
  • [U-Boot] [PATCH 1/2] image: bootm: Add OpenRTOS image type   Jeroen Hofstee
• [U-Boot] [PATCH 1/8] imx: i2c: Zap unnecessary malloc() calls   Marek Vasut
  • [U-Boot] [PATCH 5/8] arm: mx6: novena: Minor config file fix   Marek Vasut
    • [U-Boot] [PATCH 5/8] arm: mx6: novena: Minor config file fix   Stefano Babic
  • [U-Boot] [PATCH 6/8] arm: mx6: novena: Pull GPIO definitions into header   Marek Vasut
    • [U-Boot] [PATCH 6/8] arm: mx6: novena: Pull GPIO definitions into header   Stefano Babic
  • [U-Boot] [PATCH 7/8] arm: mx6: novena: Pull video handling into separate file   Marek Vasut
    • [U-Boot] [PATCH 7/8] arm: mx6: novena: Pull video handling into separate file   Stefano Babic
  • [U-Boot] [PATCH 8/8] arm: mx6: novena: Add proper LVDS display support   Marek Vasut
    • [U-Boot] [PATCH 8/8] arm: mx6: novena: Add proper LVDS display support   Simon Glass
      • [U-Boot] [PATCH 8/8] arm: mx6: novena: Add proper LVDS display support   Marek Vasut
    • [U-Boot] [PATCH 8/8] arm: mx6: novena: Add proper LVDS display support   Stefano Babic
  • [U-Boot] [PATCH 1/8] imx: i2c: Zap unnecessary malloc() calls   Christian Gmeiner
  • [U-Boot] [PATCH 1/8] imx: i2c: Zap unnecessary malloc() calls   Simon Glass
    • [U-Boot] [PATCH 1/8] imx: i2c: Zap unnecessary malloc() calls   Marek Vasut
  • [U-Boot] [PATCH 1/8] imx: i2c: Zap unnecessary malloc() calls   Stefano Babic
    • [U-Boot] [PATCH 1/8] imx: i2c: Zap unnecessary malloc() calls   Marek Vasut
• [U-Boot] [PATCH 2/8] arm: mx6: gw_ventana: Define CONFIG_SYS_MALLOC_F_LEN   Marek Vasut
  • [U-Boot] [PATCH 2/8] arm: mx6: gw_ventana: Define CONFIG_SYS_MALLOC_F_LEN   Stefano Babic
• [U-Boot] [PATCH 3/8] arm: mx6: novena: Define CONFIG_SYS_MALLOC_F_LEN   Marek Vasut
  • [U-Boot] [PATCH 3/8] arm: mx6: novena: Define CONFIG_SYS_MALLOC_F_LEN   Stefano Babic
• [U-Boot] [PATCH 4/8] arm: mx6: novena: Minor coding style fix   Marek Vasut
  • [U-Boot] [PATCH 4/8] arm: mx6: novena: Minor coding style fix   Stefano Babic
• [U-Boot] Falcon mode boot support   Tom Rini
  • [U-Boot] Falcon mode boot support   Andy Pont
    • [U-Boot] Falcon mode boot support   Andy Pont
• [U-Boot] [PATCH 0/2] mtd: nand: mxs: fix PIO_WORD number   Luca Ellero
  • [U-Boot] [PATCH 1/2] mtd: nand: mxs: fix PIO_WORDs in mxs_nand_read_buf()   Luca Ellero
  • [U-Boot] [PATCH 2/2] mtd: nand: mxs: fix PIO_WORDs in mxs_nand_write_buf()   Luca Ellero
  • [U-Boot] [PATCH 0/2] mtd: nand: mxs: fix PIO_WORD number   Marek Vasut
• [U-Boot] [PATCH] mpc85xx/t104xrdb: convert deep sleep to generic board interface   York Sun
• [U-Boot] Please pull u-boot-mpc85xx master   York Sun
  • [U-Boot] Please pull u-boot-mpc85xx master   Tom Rini
• [U-Boot] [PATCH 01/14] sun6i: s/SUNXI_GPL0_R_P2WI/SUN6I_GPL0_R_P2WI/   Hans de Goede
  • [U-Boot] [PATCH 02/14] sunxi: Add support for the rsb (Reduced Serial Bus)   Hans de Goede
    • [U-Boot] [PATCH 02/14] sunxi: Add support for the rsb (Reduced Serial Bus)   Chen-Yu Tsai
      • [U-Boot] [PATCH 02/14] sunxi: Add support for the rsb (Reduced Serial Bus)   Hans de Goede
      • [U-Boot] [PATCH 02/14] sunxi: Add support for the rsb (Reduced Serial Bus)   Ian Campbell
      • [U-Boot] [PATCH 02/14] sunxi: Add support for the rsb (Reduced Serial Bus)   Ian Campbell
      • [U-Boot] [PATCH 02/14] sunxi: Add support for the rsb (Reduced Serial Bus)   Hans de Goede
  • [U-Boot] [PATCH 03/14] sunxi: axp221: Add axp223 support   Hans de Goede
    • [U-Boot] [PATCH 03/14] sunxi: axp221: Add axp223 support   Chen-Yu Tsai
      • [U-Boot] [PATCH 03/14] sunxi: axp221: Add axp223 support   Hans de Goede
    • [U-Boot] [PATCH 03/14] sunxi: axp221: Add axp223 support   Ian Campbell
  • [U-Boot] [PATCH 04/14] sunxi: axp221: Add Kconfig help and sane defaults for typical ldo usage   Hans de Goede
    • [U-Boot] [PATCH 04/14] sunxi: axp221: Add Kconfig help and sane defaults for typical ldo usage   Ian Campbell
  • [U-Boot] [PATCH 05/14] sunxi: axp221: Make dcdc1 voltage configurable   Hans de Goede
    • [U-Boot] [PATCH 05/14] sunxi: axp221: Make dcdc1 voltage configurable   Ian Campbell
  • [U-Boot] [PATCH 06/14] sunxi: axp221: Explicitly turn off unused voltages   Hans de Goede
    • [U-Boot] [PATCH 06/14] sunxi: axp221: Explicitly turn off unused voltages   Ian Campbell
  • [U-Boot] [PATCH 07/14] sunxi: axp221: Disable dcdc4 on sun8i (A23)   Hans de Goede
    • [U-Boot] [PATCH 07/14] sunxi: axp221: Disable dcdc4 on sun8i (A23)   Ian Campbell
  • [U-Boot] [PATCH 08/14] sun6i: Add a sigma_delta_enable paramter to clock_set_pll5()   Hans de Goede
    • [U-Boot] [PATCH 08/14] sun6i: Add a sigma_delta_enable paramter to clock_set_pll5()   Ian Campbell
    • [U-Boot] [PATCH 08/14] sun6i: Add a sigma_delta_enable paramter to clock_set_pll5()   Siarhei Siamashka
  • [U-Boot] [PATCH 09/14] sun6i: Add k and m parameters to clock_set_pll5()   Hans de Goede
    • [U-Boot] [PATCH 09/14] sun6i: Add k and m parameters to clock_set_pll5()   Ian Campbell
    • [U-Boot] [PATCH 09/14] sun6i: Add k and m parameters to clock_set_pll5()   Siarhei Siamashka
      • [U-Boot] [PATCH 09/14] sun6i: Add k and m parameters to clock_set_pll5()   Hans de Goede
      • [U-Boot] [PATCH 09/14] sun6i: Add k and m parameters to clock_set_pll5()   Siarhei Siamashka
  • [U-Boot] [PATCH 10/14] sunxi: Move await_completion dram helper to dram.h   Hans de Goede
    • [U-Boot] [PATCH 10/14] sunxi: Move await_completion dram helper to dram.h   Ian Campbell
    • [U-Boot] [PATCH 10/14] sunxi: Move await_completion dram helper to dram.h   Siarhei Siamashka
      • [U-Boot] [PATCH 10/14] sunxi: Move await_completion dram helper to dram.h   Hans de Goede
      • [U-Boot] [PATCH 10/14] sunxi: Move await_completion dram helper to dram.h   Siarhei Siamashka
  • [U-Boot] [PATCH 11/14] sunxi: Fill memory before comparing it when doing dram init on sun6i   Hans de Goede
    • [U-Boot] [PATCH 11/14] sunxi: Fill memory before comparing it when doing dram init on sun6i   Ian Campbell
      • [U-Boot] [PATCH 11/14] sunxi: Fill memory before comparing it when doing dram init on sun6i   Siarhei Siamashka
      • [U-Boot] [PATCH 11/14] sunxi: Fill memory before comparing it when doing dram init on sun6i   Hans de Goede
      • [U-Boot] [PATCH 11/14] sunxi: Fill memory before comparing it when doing dram init on sun6i   Siarhei Siamashka
      • [U-Boot] [PATCH 11/14] sunxi: Fill memory before comparing it when doing dram init on sun6i   Hans de Goede
      • [U-Boot] [PATCH 11/14] sunxi: Fill memory before comparing it when doing dram init on sun6i   Ian Campbell
      • [U-Boot] [PATCH 11/14] sunxi: Fill memory before comparing it when doing dram init on sun6i   Siarhei Siamashka
      • [U-Boot] [PATCH 11/14] sunxi: Fill memory before comparing it when doing dram init on sun6i   Ian Campbell
      • [U-Boot] [PATCH 11/14] sunxi: Fill memory before comparing it when doing dram init on sun6i   Hans de Goede
  • [U-Boot] [PATCH 12/14] sunxi: Use memcmp for mctl_mem_matches   Hans de Goede
    • [U-Boot] [PATCH 12/14] sunxi: Use memcmp for mctl_mem_matches   Ian Campbell
  • [U-Boot] [PATCH 13/14] sun8i: Add dram initialization support   Hans de Goede
    • [U-Boot] [PATCH 13/14] sun8i: Add dram initialization support   Chen-Yu Tsai
    • [U-Boot] [PATCH 13/14] sun8i: Add dram initialization support   Ian Campbell
      • [U-Boot] [PATCH 13/14] sun8i: Add dram initialization support   Hans de Goede
    • [U-Boot] [PATCH 13/14] sun8i: Add dram initialization support   Siarhei Siamashka
      • [U-Boot] [PATCH 13/14] sun8i: Add dram initialization support   Hans de Goede
      • [U-Boot] [PATCH 13/14] sun8i: Add dram initialization support   Siarhei Siamashka
  • [U-Boot] [PATCH 14/14] sun8i: Add defconfig for Ippo_q8h v1.2   Hans de Goede
    • [U-Boot] [PATCH 14/14] sun8i: Add defconfig for Ippo_q8h v1.2   Ian Campbell
  • [U-Boot] [PATCH 01/14] sun6i: s/SUNXI_GPL0_R_P2WI/SUN6I_GPL0_R_P2WI/   Ian Campbell
• [U-Boot] [PATCH 1/2] kbuild: Fix a false error of generic board support   mgerlach
  • [U-Boot] [PATCH 1/2] kbuild: Fix a false error of generic board support   Tom Rini
    • [U-Boot] [PATCH 1/2] kbuild: Fix a false error of generic board support   Marek Vasut
      • [U-Boot] [PATCH 1/2] kbuild: Fix a false error of generic board support   Tom Rini
      • [U-Boot] [PATCH 1/2] kbuild: Fix a false error of generic board support   Masahiro Yamada
    • [U-Boot] [PATCH 1/2] kbuild: Fix a false error of generic board support   Masahiro Yamada
      • [U-Boot] [PATCH 1/2] kbuild: Fix a false error of generic board support   mgerlach
• [U-Boot] Booting imx6 board via USB-OTG and SPL   Nikolay Dimitrov
• [U-Boot] [PATCH v2] mmc: rmobile: Add SDHC support for Renesas rmobile ARM SoC   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v3] dm: sh: serial: Add support driver model   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH v3] dm: sh: serial: Add support driver model   Simon Glass
• [U-Boot] Implementing the uBoot SYSCALL interface for MIPS   Matthew Fortune
  • [U-Boot] Implementing the uBoot SYSCALL interface for MIPS   Daniel Schwierzeck
• [U-Boot] [PATCH] da850evm: Use generic board and libfdt, fix size for SPI flash   Peter Howard
  • [U-Boot] [PATCH] da850evm: Use generic board and libfdt, fix size for SPI flash   Jagan Teki
    • [U-Boot] [PATCH] da850evm: Use generic board and libfdt, fix size for SPI flash   Peter Howard
      • [U-Boot] [PATCH] da850evm: Use generic board and libfdt, fix size for SPI flash   Jagan Teki
      • [U-Boot] [PATCH] da850evm: Use generic board and libfdt, fix size for SPI flash   Peter Howard
      • [U-Boot] [PATCH] da850evm: Use generic board and libfdt, fix size for SPI flash   Jagan Teki
• [U-Boot] [PATCH v3 0/1] x86: Support microcode in a single place   Simon Glass
  • [U-Boot] [PATCH v3] x86: Add a script to process Intel microcode files   Simon Glass
    • [U-Boot] [PATCH v3] x86: Add a script to process Intel microcode files   Bin Meng
• [U-Boot] [PATCH v2 1/2] ARM: HYP/non-sec: Make variable gic_dist_addr as a local one   Tang Yuantian
• [U-Boot] [PATCH v2 2/2] fsl/ls1021qds: Add deep sleep support   Tang Yuantian
  • [U-Boot] [PATCH v2 2/2] fsl/ls1021qds: Add deep sleep support   Yuantian Tang
• [U-Boot] [PATCH] powerpc/t1024: add serdes protocol 0x40 and 0x5f   Shengzhou Liu
• [U-Boot] [PATCH v2] powerpc/t1024: add serdes protocol 0x40 and 0x5f   Shengzhou Liu
• [U-Boot] [PATCH] t1024qds: add missing T1024QDS_defconfig   Shengzhou Liu
• [U-Boot] [PATCH] mpc85xx/t102xrdb: convert deep sleep to generic board interface   Tang Yuantian
• [U-Boot] [PATCH v4 0/15] x86: Add Intel Queensbay platform support   Bin Meng
  • [U-Boot] [PATCH v4 01/15] x86: Integrate Tunnel Creek processor microcode   Bin Meng
    • [U-Boot] [PATCH v4 01/15] x86: Integrate Tunnel Creek processor microcode   Simon Glass
      • [U-Boot] [PATCH v4 01/15] x86: Integrate Tunnel Creek processor microcode   Simon Glass
  • [U-Boot] [PATCH v4 02/15] x86: Add basic support to queensbay platform and crownbay board   Bin Meng
    • [U-Boot] [PATCH v4 02/15] x86: Add basic support to queensbay platform and crownbay board   Simon Glass
      • [U-Boot] [PATCH v4 02/15] x86: Add basic support to queensbay platform and crownbay board   Simon Glass
  • [U-Boot] [PATCH v4 03/15] x86: Convert microcode format to device-tree-only   Bin Meng
    • [U-Boot] [PATCH v4 03/15] x86: Convert microcode format to device-tree-only   Bin Meng
      • [U-Boot] [PATCH v4 03/15] x86: Convert microcode format to device-tree-only   Simon Glass
  • [U-Boot] [PATCH v4 04/15] x86: ich6-gpio: Add Intel Tunnel Creek GPIO support   Bin Meng
    • [U-Boot] [PATCH v4 04/15] x86: ich6-gpio: Add Intel Tunnel Creek GPIO support   Simon Glass
  • [U-Boot] [PATCH v4 05/15] x86: Enable the queensbay cpu directory build   Bin Meng
    • [U-Boot] [PATCH v4 05/15] x86: Enable the queensbay cpu directory build   Simon Glass
  • [U-Boot] [PATCH v4 06/15] x86: Add queensbay and crownbay Kconfig files   Bin Meng
    • [U-Boot] [PATCH v4 06/15] x86: Add queensbay and crownbay Kconfig files   Simon Glass
  • [U-Boot] [PATCH v4 07/15] x86: Add crownbay defconfig and config.h   Bin Meng
    • [U-Boot] [PATCH v4 07/15] x86: Add crownbay defconfig and config.h   Simon Glass
  • [U-Boot] [PATCH v4 08/15] x86: Use consistent name XXX_ADDR for binary blob flash address   Bin Meng
    • [U-Boot] [PATCH v4 08/15] x86: Use consistent name XXX_ADDR for binary blob flash address   Simon Glass
  • [U-Boot] [PATCH v4 09/15] x86: Include FSP and CMC binary in the u-boot.rom build rules   Bin Meng
    • [U-Boot] [PATCH v4 09/15] x86: Include FSP and CMC binary in the u-boot.rom build rules   Simon Glass
  • [U-Boot] [PATCH v4 10/15] x86: crownbay: Add SPI flash support   Bin Meng
    • [U-Boot] [PATCH v4 10/15] x86: crownbay: Add SPI flash support   Simon Glass
  • [U-Boot] [PATCH v4 11/15] x86: crownbay: Enable Intel E1000 NIC support   Bin Meng
    • [U-Boot] [PATCH v4 11/15] x86: crownbay: Enable Intel E1000 NIC support   Simon Glass
  • [U-Boot] [PATCH v4 12/15] x86: crownbay: Add SDHCI support   Bin Meng
    • [U-Boot] [PATCH v4 12/15] x86: crownbay: Add SDHCI support   Simon Glass
  • [U-Boot] [PATCH v4 13/15] x86: Rename coreboot-serial to x86-serial   Bin Meng
    • [U-Boot] [PATCH v4 13/15] x86: Rename coreboot-serial to x86-serial   Simon Glass
  • [U-Boot] [PATCH v4 14/15] x86: Add a README.x86 for U-Boot on x86 support   Bin Meng
    • [U-Boot] [PATCH v4 14/15] x86: Add a README.x86 for U-Boot on x86 support   Simon Glass
  • [U-Boot] [PATCH v4 15/15] x86: Clean up the FSP support codes   Bin Meng
    • [U-Boot] [PATCH v4 15/15] x86: Clean up the FSP support codes   Simon Glass
      • [U-Boot] [PATCH v4 15/15] x86: Clean up the FSP support codes   Simon Glass
• [U-Boot] [PATCH] powerpc/t1024rdb: Add support for T1024RDB-PB   Shengzhou Liu
• [U-Boot] [PATCH 0/4] [RFC] rsa: Modify rsa lib to use hw acceleration   Ruchika Gupta
  • [U-Boot] [PATCH 2/4] [RFC] crypto/fsl: Add support for RSA Modular Exponentiation   Ruchika Gupta
    • [U-Boot] [PATCH 2/4] [RFC] crypto/fsl: Add support for RSA Modular Exponentiation   Simon Glass
  • [U-Boot] [PATCH 3/4] [RFC] hash: Add function to find hash_algo struct with progressive hash   Ruchika Gupta
    • [U-Boot] [PATCH 3/4] [RFC] hash: Add function to find hash_algo struct with progressive hash   Simon Glass
• [U-Boot] [PATCH 1/4] [RFC] rsa: Split the rsa-verify   Ruchika Gupta
  • [U-Boot] [PATCH 1/4] [RFC] rsa: Split the rsa-verify   Simon Glass
• [U-Boot] [PATCH 4/4] [RFC] rsa: Use checksum algorithms from struct hash_algo   Ruchika Gupta
  • [U-Boot] [PATCH 4/4] [RFC] rsa: Use checksum algorithms from struct hash_algo   Simon Glass
• [U-Boot] [PATCH v3 0/6] ARM: kirkwood: mvebu_mmc: Speed up access time   Pantelis Antoniou
  • [U-Boot] [PATCH v3 0/6] ARM: kirkwood: mvebu_mmc: Speed up access time   drEagle
• [U-Boot] [PATCH v3 3/6] SHEEVAPLUG : ADD generic board define   Gérald Kerma
• [U-Boot] [PATCH v3 4/6] SHEEVAPLUG : ADD CONFIG_CMD_FAT   Gérald Kerma
• [U-Boot] [PATCH v3 5/6] SHEEVAPLUG : ADD FDT support   Gérald Kerma
• [U-Boot] [PATCH v3 6/6] SHEEVAPLUG : REDEFINE MTDPARTS   Gérald Kerma
• [U-Boot] [PATCH v3 0/6] SHEEVAPLUG : REFRESH 201412   Prafulla Wadaskar
  • [U-Boot] [PATCH v3 0/6] SHEEVAPLUG : REFRESH 201412   drEagle
    • [U-Boot] [PATCH v3 0/6] SHEEVAPLUG : REFRESH 201412   drEagle
      • [U-Boot] [PATCH v3 0/6] SHEEVAPLUG : REFRESH 201412   Prafulla Wadaskar
• [U-Boot] [PATCH V4 2/3] usb: eth: add ASIX AX88179 DRIVER   Joe Hershberger
• [U-Boot] [PATCH v2] ubi: enable error reporting in initialization   Hector Palacios
• [U-Boot] Falcon mode boot support   Tom Rini
  • [U-Boot] Falcon mode boot support   Andy Pont
• [U-Boot] [PATCH] ls1:config: Add XHCI support for ls1021aqds   York Sun
• [U-Boot] [PATCH] ls1:config: Add USB support for ls1021atwr   York Sun
• [U-Boot] [PATCH] mpc85xx/t102xqds: convert deep sleep to generic board interface   Tang Yuantian
• [U-Boot] [PATCH] mpc85xx/t1040qds: convert deep sleep to generic board interface   Tang Yuantian
• [U-Boot] [PATCH] mpc85xx: clean up the old deep sleep framework   Tang Yuantian
  • [U-Boot] [PATCH] mpc85xx: clean up the old deep sleep framework   York Sun
    • [U-Boot] [PATCH] mpc85xx: clean up the old deep sleep framework   Yuantian Tang
      • [U-Boot] [PATCH] mpc85xx: clean up the old deep sleep framework   York Sun
• [U-Boot] [PATCH v2] ubi: enable error reporting in initialization   Hector Palacios
• [U-Boot] [PATCH 0/5] ARM: UniPhier: minor fixes   Masahiro Yamada
  • [U-Boot] [PATCH 2/5] ARM: UniPhier: remove unnecessary ifdef conditional   Masahiro Yamada
  • [U-Boot] [PATCH 3/5] ARM: UniPhier: use DRAM area for init stack of normal image   Masahiro Yamada
  • [U-Boot] [PATCH 4/5] ARM: UniPhier: select CONFIG_SPL   Masahiro Yamada
  • [U-Boot] [PATCH 5/5] ARM: UniPhier: enable CONFIG_CMD_DM   Masahiro Yamada
    • [U-Boot] [PATCH 5/5] ARM: UniPhier: enable CONFIG_CMD_DM   Simon Glass
  • [U-Boot] [PATCH 0/5] ARM: UniPhier: minor fixes   Masahiro YAMADA
    • [U-Boot] [PATCH 0/5] ARM: UniPhier: minor fixes   Tom Rini
• [U-Boot] [PATCH 1/5] ARM: UniPhier: fix property names of aliases nodes of device trees   Masahiro Yamada
• [U-Boot] [PATCH] i2c_eeprom: include <linux/err.h> to fix build error   Masahiro Yamada
  • [U-Boot] [PATCH] i2c_eeprom: include <linux/err.h> to fix build error   Simon Glass
    • [U-Boot] [PATCH] i2c_eeprom: include <linux/err.h> to fix build error   Simon Glass
• [U-Boot] [PATCH] ARM: OMAP5: DRA7xx: Enable I2C4 and I2C5 usage on the J6Eco EVM   Lubomir Popov
• [U-Boot] Regarding patch: http://patchwork.ozlabs.org/patch/373593/   Marek Vasut
• [U-Boot] [PATCH 1/4] [RFC] [v2] rsa: Split the rsa-verify   Ruchika Gupta
  • [U-Boot] [PATCH 2/4] [RFC] [v2] crypto/fsl: Add support for RSA Modular Exponentiation   Ruchika Gupta
  • [U-Boot] [PATCH 3/4] [RFC] [v2] hash: Add function to find hash_algo struct with progressive hash   Ruchika Gupta
  • [U-Boot] [PATCH 4/4] [RFC] [v2] rsa: Use checksum algorithms from struct hash_algo   Ruchika Gupta
  • [U-Boot] [PATCH 1/4] [RFC] [v2] rsa: Split the rsa-verify   Simon Glass
• [U-Boot] [GIT] Pull request: u-boot-dfu (18-12-2014)   Lukasz Majewski
  • [U-Boot] [GIT] Pull request: u-boot-dfu (18-12-2014)   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
  • [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PATCH 1/2] SPI: Add S25FL064A and S25FL116K flash information   Jagan Teki
  • [U-Boot] [PATCH 1/2] SPI: Add S25FL064A and S25FL116K flash information   Ben Dooks
    • [U-Boot] [PATCH 1/2] SPI: Add S25FL064A and S25FL116K flash information   Jagan Teki
• [U-Boot] [PATCH] mtd: sf: Zap ramtron driver   Jagan Teki
• [U-Boot] [PATCH 2/2] SPI: Add S25FL164K flash identifier info   Jagan Teki
• [U-Boot] [PATCH] Revert "spi: add config option to enable the WP pin function on st micron flashes"   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH] Revert "spi: add config option to enable the WP pin function on st micron flashes"   Jagan Teki
    • [U-Boot] [PATCH] Revert "spi: add config option to enable the WP pin function on st micron flashes"   Heiko Schocher
      • [U-Boot] [PATCH] Revert "spi: add config option to enable the WP pin function on st micron flashes"   Jagan Teki
• [U-Boot] [PATCH v2 0/3] Serial Flash: call spi_flash_free more coherently   Jagan Teki
  • [U-Boot] [PATCH v2 0/3] Serial Flash: call spi_flash_free more coherently   Valentin Longchamp
• [U-Boot] Pull request: u-boot-uniphier   Masahiro YAMADA
  • [U-Boot] Pull request: u-boot-uniphier   Tom Rini
• [U-Boot] [PATCH 1/1] kikwood: uboot-envtools: add plugs boards   Gerald Kerma
  • [U-Boot] [PATCH 1/1] kikwood: uboot-envtools: add plugs boards   drEagle
• [U-Boot] [PATCH v3] arm: build arch memset/memcpy in Thumb2 mode   Stefan Agner
• [U-Boot] [PATCH] RFC: am35xx: Rearrange SPL on am35xx   Simon Glass
  • [U-Boot] [PATCH] RFC: am35xx: Rearrange SPL on am35xx   Albert ARIBAUD
• [U-Boot] [PATCH] TI: armv7: enable UUID and PART   Nishanth Menon
• [U-Boot] [PATCH 0/2] ARM: OMAP4: Fix SDP4430 ES2.3 breakage   Nishanth Menon
• [U-Boot] [PATCH 1/2] ARM: OMAP4: Panda: rework DMM logic   Nishanth Menon
• [U-Boot] [PATCH 2/2] Revert "ARM: omap4: Update sdram setting for panda rev A6"   Nishanth Menon
• [U-Boot] [PATCH] RFC: am35xx: Rearrange SPL on am35xx   Simon Glass
  • [U-Boot] [PATCH] RFC: am35xx: Rearrange SPL on am35xx   Tom Rini
    • [U-Boot] [PATCH] RFC: am35xx: Rearrange SPL on am35xx   Simon Glass
      • [U-Boot] [PATCH] RFC: am35xx: Rearrange SPL on am35xx   Tom Rini
      • [U-Boot] [PATCH] RFC: am35xx: Rearrange SPL on am35xx   Simon Glass
      • [U-Boot] [PATCH] RFC: am35xx: Rearrange SPL on am35xx   Tom Rini
      • [U-Boot] [PATCH] RFC: am35xx: Rearrange SPL on am35xx   Simon Glass
• [U-Boot] Please pull u-boot-x86.git   Simon Glass
  • [U-Boot] Please pull u-boot-x86.git   Tom Rini
• [U-Boot] [PATCH 1/2] mtd:mxs:nand calculate ecc strength dynamically   Peng Fan
  • [U-Boot] [PATCH 2/2] mtd:mxs:nand support oobsize bigger than 512   Peng Fan
• [U-Boot] [PATCH] spi: designware_spi: Fix off-by-one for checking fifo depth   Axel Lin
  • [U-Boot] [PATCH] spi: designware_spi: Fix off-by-one for checking fifo depth   Stefan Roese
    • [U-Boot] [PATCH] spi: designware_spi: Fix off-by-one for checking fifo depth   Axel Lin
• [U-Boot] [PATCH] dm: README: recommend u-boot.dtb to try driver-model on sandbox   Masahiro Yamada
  • [U-Boot] [PATCH] dm: README: recommend u-boot.dtb to try driver-model on sandbox   Jagan Teki
    • [U-Boot] [PATCH] dm: README: recommend u-boot.dtb to try driver-model on sandbox   Masahiro Yamada
      • [U-Boot] [PATCH] dm: README: recommend u-boot.dtb to try driver-model on sandbox   Simon Glass
      • [U-Boot] [PATCH] dm: README: recommend u-boot.dtb to try driver-model on sandbox   Jagan Teki
      • [U-Boot] [PATCH] dm: README: recommend u-boot.dtb to try driver-model on sandbox   Masahiro Yamada
      • [U-Boot] [PATCH] dm: README: recommend u-boot.dtb to try driver-model on sandbox   Simon Glass
      • [U-Boot] [PATCH] dm: README: recommend u-boot.dtb to try driver-model on sandbox   Simon Glass
• [U-Boot] [PATCH] stv0991: record defconfig ownership in MAINTAINERS   Masahiro Yamada
• [U-Boot] [PATCH] omap: beagle_x15: add MAINTAINERS   Masahiro Yamada
• [U-Boot] [PATCH] ARM: remove redudant information from Kconfig files   Masahiro Yamada
  • [U-Boot] [PATCH] ARM: remove redudant information from Kconfig files   Bo Shen
• [U-Boot] [PATCH v4 18/23] ARM: Implement non-cached memory support   Albert ARIBAUD
  • [U-Boot] [PATCH v4 18/23] ARM: Implement non-cached memory support   Simon Glass
• [U-Boot] [PATCH 1/1] marvell: kirkwood: guruplug refresh for newer kernel   Gerald Kerma
  • [U-Boot] [PATCH v2 1/1] marvell: kirkwood: guruplug refresh for newer kernel   Gerald Kerma
    • [U-Boot] [PATCH v2 1/1] marvell: kirkwood: guruplug refresh for newer kernel   drEagle
• [U-Boot] [PATCH 0/5] x86: Support PCI based UART as the U-Boot serial console   Bin Meng
  • [U-Boot] [PATCH 1/5] x86: Add missing DECLARE_GLOBAL_DATA_PTR for pci.c   Bin Meng
    • [U-Boot] [PATCH 1/5] x86: Add missing DECLARE_GLOBAL_DATA_PTR for pci.c   Simon Glass
      • [U-Boot] [PATCH 1/5] x86: Add missing DECLARE_GLOBAL_DATA_PTR for pci.c   Bin Meng
  • [U-Boot] [PATCH 2/5] x86: Support pci bus scan in the early phase   Bin Meng
  • [U-Boot] [PATCH 3/5] x86: Add an API for finding pci devices in the early phase   Bin Meng
    • [U-Boot] [PATCH 3/5] x86: Add an API for finding pci devices in the early phase   Simon Glass
      • [U-Boot] [PATCH 3/5] x86: Add an API for finding pci devices in the early phase   Bin Meng
      • [U-Boot] [PATCH 3/5] x86: Add an API for finding pci devices in the early phase   Simon Glass
      • [U-Boot] [PATCH 3/5] x86: Add an API for finding pci devices in the early phase   Bin Meng
      • [U-Boot] [PATCH 3/5] x86: Add an API for finding pci devices in the early phase   Simon Glass
  • [U-Boot] [PATCH 4/5] x86: Support PCI UART in the x86_serial driver   Bin Meng
    • [U-Boot] [PATCH 4/5] x86: Support PCI UART in the x86_serial driver   Simon Glass
      • [U-Boot] [PATCH 4/5] x86: Support PCI UART in the x86_serial driver   Bin Meng
      • [U-Boot] [PATCH 4/5] x86: Support PCI UART in the x86_serial driver   Simon Glass
      • [U-Boot] [PATCH 4/5] x86: Support PCI UART in the x86_serial driver   Bin Meng
      • [U-Boot] [PATCH 4/5] x86: Support PCI UART in the x86_serial driver   Simon Glass
      • [U-Boot] [PATCH 4/5] x86: Support PCI UART in the x86_serial driver   Bin Meng
  • [U-Boot] [PATCH 5/5] x86: Add PCI UART related defines in crownbay.h   Bin Meng
• [U-Boot] [PATCH] imx:mx6 fix return value of mxc_get_clock   Stefano Babic
• [U-Boot] [PATCH] driver/ddr/fsl: Remove duplicate inclusion of header file   Chunhe Lan
  • [U-Boot] [PATCH] driver/ddr/fsl: Remove duplicate inclusion of header file   York Sun
• [U-Boot] [PATCH 0/3] ARM: UniPhier: add DDR PHY init code and utility command   Masahiro Yamada
  • [U-Boot] [PATCH 1/3] ARM: UniPhier: add DDR PHY training code   Masahiro Yamada
  • [U-Boot] [PATCH 3/3] ARM: UniPhier: display boot swap pin status by pinmon command   Masahiro Yamada
  • [U-Boot] [PATCH 0/3] ARM: UniPhier: add DDR PHY init code and utility command   Masahiro YAMADA
• [U-Boot] [PATCH 2/3] ARM: UniPhier: add dump command of DDR PHY parameters   Masahiro Yamada
• [U-Boot] [PATCH v2] powerpc/t1040qds: Add support of SD boot for T1040QDS Board   Vijay Rai
• [U-Boot] [PATCH] arm: socfpga: Change watchdog timeout   Stefan Roese
• [U-Boot] [PATCH v2] arm: socfpga: Change watchdog timeout   Stefan Roese
  • [U-Boot] [PATCH v2] arm: socfpga: Change watchdog timeout   Marek Vasut
• [U-Boot] [PATCH] ARM: OMAP5: DRA7xx: Add support for power rail grouping   Lubomir Popov
• [U-Boot] [PATCH v2 1/2] mtd: OMAP: Enable GPMC prefetch mode   Guido Martínez
  • [U-Boot] [PATCH v2 1/2] mtd: OMAP: Enable GPMC prefetch mode   Daniel Mack
• [U-Boot] [PATCH v2 00/11] Add driver for VSC9953 Ethernet Switch   Codrin Ciubotariu
  • [U-Boot] [PATCH v2 01/11] net/fm: Fix error when FMAN MAC has no PHY   Codrin Ciubotariu
  • [U-Boot] [PATCH v2 02/11] arch/powerpc: Fix mapping of Freescale SerDes protocols   Codrin Ciubotariu
  • [U-Boot] [PATCH v2 03/11] arch/powerpc: Add SGMII support for the L2 Switch ports   Codrin Ciubotariu
  • [U-Boot] [PATCH v2 04/11] net/fm: Enable FMAN ports if l2switch ports are connected over SGMII   Codrin Ciubotariu
  • [U-Boot] [PATCH v2 05/11] net/vsc9953: Add driver for Vitesse VSC9953 L2 Switch IP   Codrin Ciubotariu
  • [U-Boot] [PATCH v2 06/11] arch/powerpc: Enable VSC9953 driver on T1040 and T1020   Codrin Ciubotariu
  • [U-Boot] [PATCH v2 07/11] board/T1040qds: Fix lane-to-slot mapping for SerDes protocol 0x89   Codrin Ciubotariu
  • [U-Boot] [PATCH v2 08/11] board/T1040qds: T1040 FMAN ports FM1 at DTSEC1 and FM1 at DTSEC2 have no PHYs   Codrin Ciubotariu
  • [U-Boot] [PATCH v2 09/11] board/T104xrdb: T1040 FMAN ports FM1 at DTSEC1 and FM1 at DTSEC2 have no PHYs   Codrin Ciubotariu
  • [U-Boot] [PATCH v2 10/11] board/T1040qds: Add VSC9953 support for T1040qds board   Codrin Ciubotariu
  • [U-Boot] [PATCH v2 11/11] board/T1040rdb: Add VSC9953 support for T1040rdb board   Codrin Ciubotariu
• [U-Boot] [PATCH v2 00/11] video: Add / fix videomodes modes, use for sunxi, enable EDID on sunxi   Hans de Goede
  • [U-Boot] [PATCH v2 03/11] videomodes: Add a bunch of high res modes   Hans de Goede
  • [U-Boot] [PATCH v2 05/11] videomodes: Add helper functions to parse video-mode env-var extra options   Hans de Goede
    • [U-Boot] [PATCH v2 05/11] videomodes: Add helper functions to parse video-mode env-var extra options   Ian Campbell
      • [U-Boot] [PATCH v2 05/11] videomodes: Add helper functions to parse video-mode env-var extra options   Hans de Goede
  • [U-Boot] [PATCH v2 07/11] edid: Add an edid_check_checksum() helper function   Hans de Goede
  • [U-Boot] [PATCH v2 08/11] sunxi: video: Use video-mode/-timing from videomodes   Hans de Goede
    • [U-Boot] [PATCH v2 08/11] sunxi: video: Use video-mode/-timing from videomodes   Ian Campbell
  • [U-Boot] [PATCH v2 09/11] sunxi: video: Add support for video-mode environment variable   Hans de Goede
    • [U-Boot] [PATCH v2 09/11] sunxi: video: Add support for video-mode environment variable   Ian Campbell
  • [U-Boot] [PATCH v2 10/11] sunxi: video: Add hpd option   Hans de Goede
    • [U-Boot] [PATCH v2 10/11] sunxi: video: Add hpd option   Ian Campbell
  • [U-Boot] [PATCH v2 11/11] sunxi: video: Add DDC & EDID support   Hans de Goede
    • [U-Boot] [PATCH v2 11/11] sunxi: video: Add DDC & EDID support   Ian Campbell
• [U-Boot] [PATCH v2 01/11] videomodes: Add pixelclock_khz and refresh fields to ctfb_res_modes   Hans de Goede
• [U-Boot] [PATCH v2 02/11] videomodes: Add (vesa) standard timings   Hans de Goede
• [U-Boot] [PATCH v2 04/11] videomodes: Add video_get_ctfb_res_modes helper function   Hans de Goede
• [U-Boot] [PATCH v2 06/11] videomodes: Add video_edid_dtd_to_ctfb_res_modes helper function   Hans de Goede
• [U-Boot] [RFC PATCH 0/2] This series supports 10bit addressing for driver-model I2C   Masahiro Yamada
  • [U-Boot] [RFC PATCH 1/2] cmd_i2c: change variable type for 10bit addressing support   Masahiro Yamada
    • [U-Boot] [RFC PATCH 1/2] cmd_i2c: change variable type for 10bit addressing support   Simon Glass
      • [U-Boot] [RFC PATCH 1/2] cmd_i2c: change variable type for 10bit addressing support   Simon Glass
  • [U-Boot] [RFC PATCH 2/2] dm: i2c: support 10bit addressing in I2C uclass layer   Masahiro Yamada
    • [U-Boot] [RFC PATCH 2/2] dm: i2c: support 10bit addressing in I2C uclass layer   Simon Glass
      • [U-Boot] [RFC PATCH 2/2] dm: i2c: support 10bit addressing in I2C uclass layer   Masahiro YAMADA
      • [U-Boot] [RFC PATCH 2/2] dm: i2c: support 10bit addressing in I2C uclass layer   Simon Glass
      • [U-Boot] [RFC PATCH 2/2] dm: i2c: support 10bit addressing in I2C uclass layer   Simon Glass
• [U-Boot] [PATCH 1/3] socfpga: Drop redundant save_boot_params   Tom Rini
  • [U-Boot] [PATCH 2/3] am33xx: Drop timer_init call from s_init   Tom Rini
    • [U-Boot] [PATCH 2/3] am33xx: Drop timer_init call from s_init   Simon Glass
  • [U-Boot] [PATCH 3/3] omap-common/hwinit-common.c: timer_init() doesn't need to touch gd   Tom Rini
    • [U-Boot] [PATCH 3/3] omap-common/hwinit-common.c: timer_init() doesn't need to touch gd   Simon Glass
  • [U-Boot] [PATCH 1/3] socfpga: Drop redundant save_boot_params   Marek Vasut
• [U-Boot] [PATCH RFT 1/2] TI ARMv7: Don't use GD before crt0.S has set it   Tom Rini
  • [U-Boot] [PATCH RFT 2/2] davinci: Do not duplicate setting of gd   Tom Rini
    • [U-Boot] [PATCH RFT 2/2] davinci: Do not duplicate setting of gd   Peter Howard
    • [U-Boot] [PATCH RFT 2/2] davinci: Do not duplicate setting of gd   Peter Howard
      • [U-Boot] [PATCH RFT 2/2] davinci: Do not duplicate setting of gd   Tom Rini
  • [U-Boot] [PATCH RFT 1/2] TI ARMv7: Don't use GD before crt0.S has set it   Simon Glass
• [U-Boot] [PATCH] mmc: sunxi: Fix misuse of gpio_direction_input()   Axel Lin
  • [U-Boot] [PATCH] mmc: sunxi: Fix misuse of gpio_direction_input()   Simon Glass
    • [U-Boot] [PATCH] mmc: sunxi: Fix misuse of gpio_direction_input()   Ian Campbell
      • [U-Boot] [PATCH] mmc: sunxi: Fix misuse of gpio_direction_input()   Axel Lin
• [U-Boot] [PATCH v2 0/4] sun8i: Remaining sun8i SPL support patches   Hans de Goede
  • [U-Boot] [PATCH v2 1/4] sun6i: s/SUNXI_*P2WI*/SUN6I_*P2WI*/   Hans de Goede
  • [U-Boot] [PATCH v2 2/4] sunxi: Add support for the rsb (Reduced Serial Bus)   Hans de Goede
    • [U-Boot] [PATCH v2 2/4] sunxi: Add support for the rsb (Reduced Serial Bus)   Ian Campbell
  • [U-Boot] [PATCH v2 3/4] sun8i: Add dram initialization support   Hans de Goede
    • [U-Boot] [PATCH v2 3/4] sun8i: Add dram initialization support   Ian Campbell
  • [U-Boot] [PATCH v2 4/4] sun8i: Ippo_q8h_v5_defconfig: Enable SPL support   Hans de Goede
    • [U-Boot] [PATCH v2 4/4] sun8i: Ippo_q8h_v5_defconfig: Enable SPL support   Ian Campbell
  • [U-Boot] [PATCH v2 0/4] sun8i: Remaining sun8i SPL support patches   Chen-Yu Tsai
    • [U-Boot] [PATCH v2 0/4] sun8i: Remaining sun8i SPL support patches   Siarhei Siamashka
• [U-Boot] [PATCH 0/6] sunxi: video: Add hdmi output fmt support + misc fixes   Hans de Goede
  • [U-Boot] [PATCH 1/6] edid: Add struct and defines for cea681 extension blocks   Hans de Goede
  • [U-Boot] [PATCH 2/6] sunxi: video: Add hdmi support   Hans de Goede
    • [U-Boot] [PATCH 2/6] sunxi: video: Add hdmi support   Ian Campbell
  • [U-Boot] [PATCH 4/6] sunxi: video: When using edid use CEA681 extension blocks to select hdmi output   Hans de Goede
    • [U-Boot] [PATCH 4/6] sunxi: video: When using edid use CEA681 extension blocks to select hdmi output   Ian Campbell
  • [U-Boot] [PATCH 5/6] sunxi: video: Give hotplug-detect (hpd) signal some time to show up   Hans de Goede
    • [U-Boot] [PATCH 5/6] sunxi: video: Give hotplug-detect (hpd) signal some time to show up   Ian Campbell
    • [U-Boot] [PATCH 5/6] sunxi: video: Give hotplug-detect (hpd) signal some time to show up   B.R. Oake
      • [U-Boot] [PATCH 5/6] sunxi: video: Give hotplug-detect (hpd) signal some time to show up   Hans de Goede
      • [U-Boot] [PATCH 5/6] sunxi: video: Give hotplug-detect (hpd) signal some time to show up   B.R. Oake
      • [U-Boot] [PATCH 5/6] sunxi: video: Give hotplug-detect (hpd) signal some time to show up   Hans de Goede
  • [U-Boot] [PATCH 6/6] sunxi: video: Set input sync enable   Hans de Goede
    • [U-Boot] [PATCH 6/6] sunxi: video: Set input sync enable   Ian Campbell
  • [U-Boot] [PATCH 0/6] sunxi: video: Add hdmi output fmt support + misc fixes   Ian Campbell
• [U-Boot] [PATCH 3/6] sunxi: video: Add sunxi_hdmi_edid_get_block helper function   Hans de Goede
  • [U-Boot] [PATCH 3/6] sunxi: video: Add sunxi_hdmi_edid_get_block helper function   Ian Campbell
• [U-Boot] linux-sunxi/u-boot-sunxi is no longer supported, time to switch to upstream u-boot   Hans de Goede
  • [U-Boot] [linux-sunxi] linux-sunxi/u-boot-sunxi is no longer supported, time to switch to upstream u-boot   Emilio López
  • [U-Boot] [linux-sunxi] linux-sunxi/u-boot-sunxi is no longer supported, time to switch to upstream u-boot   Michal Suchanek
    • [U-Boot] [linux-sunxi] linux-sunxi/u-boot-sunxi is no longer supported, time to switch to upstream u-boot   Hans de Goede
      • [U-Boot] [linux-sunxi] linux-sunxi/u-boot-sunxi is no longer supported, time to switch to upstream u-boot   Siarhei Siamashka
• [U-Boot] [PATCH] ARM: bootm: do not add PSCI to fdt when booting in secure mode.   Ian Campbell
  • [U-Boot] [PATCH] ARM: bootm: do not add PSCI to fdt when booting in secure mode.   Hans de Goede
• [U-Boot] L2 cache and LCD on sunxi   Simon Glass
  • [U-Boot] L2 cache and LCD on sunxi   Hans de Goede
    • [U-Boot] L2 cache and LCD on sunxi   Simon Glass
      • [U-Boot] L2 cache and LCD on sunxi   Hans de Goede
      • [U-Boot] L2 cache and LCD on sunxi   Hans de Goede
      • [U-Boot] L2 cache and LCD on sunxi   Simon Glass
      • [U-Boot] L2 cache and LCD on sunxi   Hans de Goede
      • [U-Boot] L2 cache and LCD on sunxi   Simon Glass
• [U-Boot] [linux-sunxi] linux-sunxi/u-boot-sunxi is no longer supported, time to switch to upstream u-boot   Siarhei Siamashka
  • [U-Boot] [linux-sunxi] linux-sunxi/u-boot-sunxi is no longer supported, time to switch to upstream u-boot   Emilio López
    • [U-Boot] [linux-sunxi] linux-sunxi/u-boot-sunxi is no longer supported, time to switch to upstream u-boot   Hans de Goede
      • [U-Boot] [linux-sunxi] linux-sunxi/u-boot-sunxi is no longer supported, time to switch to upstream u-boot   Ian Campbell
• [U-Boot] [PATCH 1/1] cmd, fdt: fix working_fdt is set to wrong value   Hua Yanghao
  • [U-Boot] [PATCH 1/1] cmd, fdt: fix working_fdt is set to wrong value   Simon Glass
    • [U-Boot] [PATCH 1/1] cmd, fdt: fix working_fdt is set to wrong value   Hua Yanghao
      • [U-Boot] [PATCH 1/1] cmd, fdt: fix working_fdt is set to wrong value   Hua Yanghao
      • [U-Boot] [PATCH 1/1] cmd, fdt: fix working_fdt is set to wrong value   Simon Glass
• [U-Boot] [PATCH 1/4] arm: rmobile: koelsch: Migrate serial driver to drivers model   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 3/4] arm: rmobile: lager: Migrate serial driver to drivers model   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 2/4] arm: rmobile: gose: Migrate serial driver to drivers model   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 4/4] arm: rmobile: alt: Migrate serial driver to drivers model   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v4] dm: sh: serial: Add support driver model   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 0/7] Crazy patches (Nightmare of <stdint.h>)   Masahiro Yamada
  • [U-Boot] [PATCH 2/7] types.h: define s8, s16, s32, s64, u8, u16, u32, u64 based on compiler info (MAD)   Masahiro Yamada
  • [U-Boot] [PATCH 3/7] types: defined __s8, __16, __s32, __s64, __u8, __u16, __u32, __u64 based on compiler info (MAD)   Masahiro Yamada
  • [U-Boot] [PATCH 7/7] Make BITS_PER_LONG compiler-dependent (MAD)   Masahiro Yamada
    • [U-Boot] [PATCH 7/7] Make BITS_PER_LONG compiler-dependent (MAD)   Simon Glass
  • [U-Boot] [PATCH 0/7] Crazy patches (Nightmare of <stdint.h>)   Wolfgang Denk
• [U-Boot] [PATCH 1/7] types.h: define (u)int8_t, (u)int16_t, (u)int32_t based on compiler info (MAD)   Masahiro Yamada
  • [U-Boot] [PATCH 1/7] types.h: define (u)int8_t, (u)int16_t, (u)int32_t based on compiler info (MAD)   Simon Glass
    • [U-Boot] [PATCH 1/7] types.h: define (u)int8_t, (u)int16_t, (u)int32_t based on compiler info (MAD)   Masahiro Yamada
• [U-Boot] [PATCH 4/7] Check if compiler-provided <stdint.h> and <inttypes.h> are available if CONFIG_USE_STDINT=y (MAD)   Masahiro Yamada
  • [U-Boot] [PATCH 4/7] Check if compiler-provided <stdint.h> and <inttypes.h> are available if CONFIG_USE_STDINT=y (MAD)   Simon Glass
    • [U-Boot] [PATCH 4/7] Check if compiler-provided <stdint.h> and <inttypes.h> are available if CONFIG_USE_STDINT=y (MAD)   Masahiro Yamada
• [U-Boot] [PATCH 5/7] Replace "llx" with PRIx64 to fix warnings on sandbox (MAD)   Masahiro Yamada
  • [U-Boot] [PATCH 5/7] Replace "llx" with PRIx64 to fix warnings on sandbox (MAD)   Wolfgang Denk
  • [U-Boot] [PATCH 5/7] Replace "llx" with PRIx64 to fix warnings on sandbox (MAD)   Simon Glass
• [U-Boot] [PATCH 6/7] Use PRIx32 etc. to print out 32bit-width variable (MAD)   Masahiro Yamada
  • [U-Boot] [PATCH 6/7] Use PRIx32 etc. to print out 32bit-width variable (MAD)   Simon Glass
• [U-Boot] [PATCH] arm: exynos: clock: support SPLL as mmc source clock for exynos5420   Joonyoung Shim
  • [U-Boot] [PATCH] arm: exynos: clock: support SPLL as mmc source clock for exynos5420   Jaehoon Chung
  • [U-Boot] [PATCH] arm: exynos: clock: support SPLL as mmc source clock for exynos5420   Minkyu Kang
• [U-Boot] [PATCH 0/4] i2c: UniPhier: add I2C drivers based on driver model   Masahiro Yamada
  • [U-Boot] [PATCH 4/4] ARM: UniPhier: enable CONFIG_I2C_EEPROM   Masahiro Yamada
• [U-Boot] [PATCH 1/4] i2c: UniPhier: add driver for UniPhier i2c controller   Masahiro Yamada
  • [U-Boot] [PATCH 1/4] i2c: UniPhier: add driver for UniPhier i2c controller   Simon Glass
    • [U-Boot] [PATCH 1/4] i2c: UniPhier: add driver for UniPhier i2c controller   Masahiro Yamada
      • [U-Boot] [PATCH 1/4] i2c: UniPhier: add driver for UniPhier i2c controller   Simon Glass
• [U-Boot] [PATCH 2/4] i2c: UniPhier: add driver for UniPhier FIFO-builtin i2c controller   Masahiro Yamada
  • [U-Boot] [PATCH 2/4] i2c: UniPhier: add driver for UniPhier FIFO-builtin i2c controller   Simon Glass
    • [U-Boot] [PATCH 2/4] i2c: UniPhier: add driver for UniPhier FIFO-builtin i2c controller   Masahiro Yamada
• [U-Boot] [PATCH 3/4] ARM: UniPhier: enable UniPhier I2C driver   Masahiro Yamada
• [U-Boot] [PATCH 2/4] imx: mx6slevk: Add PMIC Pfuze support   Fabio Estevam
• [U-Boot] POST Memory Test Problem   Allan Fislor
  • [U-Boot] POST Memory Test Problem   Wolfgang Denk
    • [U-Boot] POST Memory Test Problem   Allan Fislor
• [U-Boot] [PATCH 3/3] mx6boards: Fix error handling in board_mmc_init()   Nikolay Dimitrov
  • [U-Boot] [PATCH 3/3] mx6boards: Fix error handling in board_mmc_init()   Fabio Estevam
• [U-Boot] [PATCH V2] add README.distro file   Stephen Warren
  • [U-Boot] [PATCH V2] add README.distro file   Ian Campbell
  • [U-Boot] [PATCH V2] add README.distro file   Ian Campbell
• [U-Boot] [PATCH 1/8] arm: am437x: PLL values for all input frequencies   Felipe Balbi
  • [U-Boot] [PATCH 2/8] arm: am437x: Enable hardware leveling for EMIF   Felipe Balbi
  • [U-Boot] [PATCH 3/8] arm: am437x: Correct PLL frequency for 25MHz   Felipe Balbi
  • [U-Boot] [PATCH 4/8] board: ti: am43xx: replace if else if else with a switch   Felipe Balbi
  • [U-Boot] [PATCH 5/8] power: tps65218: define all valid VDD_MPU voltages   Felipe Balbi
  • [U-Boot] [PATCH 6/8] board: ti: am43xx: take care of all OPPs   Felipe Balbi
  • [U-Boot] [PATCH 7/8] pmic: add tps62362 simple wrapper code   Felipe Balbi
  • [U-Boot] [PATCH 8/8] board: ti: am43xx: add support for AM43xx Industrial Development Kit   Felipe Balbi
• [U-Boot] [PATCH 1/2] eMMC: add support for operations in RPMB partition   Roman Peniaev
• [U-Boot] [PATCH] buildman: Fix some typos in README   Dirk Behme
  • [U-Boot] [PATCH] buildman: Fix some typos in README   Simon Glass
  • [U-Boot] buildman: Fix some typos in README   Tom Rini
• [U-Boot] [PATCH v1] x86: ahci: Make sure interface is not busy after enabling the port   Bin Meng
  • [U-Boot] [PATCH v1] x86: ahci: Make sure interface is not busy after enabling the port   Simon Glass
    • [U-Boot] [PATCH v1] x86: ahci: Make sure interface is not busy after enabling the port   Bin Meng
      • [U-Boot] [PATCH v1] x86: ahci: Make sure interface is not busy after enabling the port   Simon Glass
      • [U-Boot] [PATCH v1] x86: ahci: Make sure interface is not busy after enabling the port   Bin Meng
• [U-Boot] [PATCH v4 00/18] Support for eMMC partitioning and related fixes   Diego Santa Cruz
  • [U-Boot] [PATCH v4 01/18] mmc: show hardware partition sizes in mmcinfo output   Diego Santa Cruz
  • [U-Boot] [PATCH v4 03/18] mmc: make eMMC general purpose partition numbering match spec   Diego Santa Cruz
  • [U-Boot] [PATCH v4 04/18] mmc: skip mmcinfo partition info processing for eMMC < 4.41   Diego Santa Cruz
  • [U-Boot] [PATCH v4 06/18] mmc: computation of eMMC GP partition size was missing 512 KiB factor   Diego Santa Cruz
  • [U-Boot] [PATCH v4 07/18] mmc: read the size of eMMC enhanced user data area   Diego Santa Cruz
  • [U-Boot] [PATCH v4 08/18] mmc: display size and start of eMMC enhanced user data area in mmcinfo   Diego Santa Cruz
  • [U-Boot] [PATCH v4 09/18] mmc: fix erase_grp_size computation with high-capacity size definition   Diego Santa Cruz
  • [U-Boot] [PATCH v4 10/18] mmc: read the high capacity WP group size for eMMC   Diego Santa Cruz
  • [U-Boot] [PATCH v4 11/18] mmc: show the erase group size and HC WP group size in mmcinfo output   Diego Santa Cruz
  • [U-Boot] [PATCH v4 12/18] mmc: eMMC partitioning data is not effective till partitioning completed   Diego Santa Cruz
  • [U-Boot] [PATCH v4 13/18] mmc: the ext_csd data may be used during init even if reading failed   Diego Santa Cruz
  • [U-Boot] [PATCH v4 14/18] mmc: add API to do eMMC hardware partitioning   Diego Santa Cruz
  • [U-Boot] [PATCH v4 15/18] mmc: add mmc hwpartition sub-command to do eMMC hardware partitioning   Diego Santa Cruz
  • [U-Boot] [PATCH v4 16/18] mmc: extend the mmc hardware partitioning API with write reliability   Diego Santa Cruz
  • [U-Boot] [PATCH v4 17/18] mmc: extend the mmc hwpartition sub-command to change write reliability   Diego Santa Cruz
  • [U-Boot] [PATCH v4 18/18] mmc: extend mmcinfo output to show partition write reliability settings   Diego Santa Cruz
• [U-Boot] [PATCH v4 02/18] mmc: extend mmcinfo to show enhanced partition attribute   Diego Santa Cruz
• [U-Boot] [PATCH v4 05/18] mmc: incomplete test to switch to high-capacity group size definitions   Diego Santa Cruz
• [U-Boot] [PATCH 0/9] [v3] rsa: Modify rsa lib to use hw acceleration   Ruchika Gupta
  • [U-Boot] [PATCH 1/9] [v3] rsa: Split the rsa-verify to separate the modular exponentiation   Ruchika Gupta
    • [U-Boot] [PATCH 1/9] [v3] rsa: Split the rsa-verify to separate the modular exponentiation   Simon Glass
  • [U-Boot] [PATCH 2/9] [v3] FIT: Modify option FIT_SIGNATURE in Kconfig   Ruchika Gupta
    • [U-Boot] [PATCH 2/9] [v3] FIT: Modify option FIT_SIGNATURE in Kconfig   Simon Glass
  • [U-Boot] [PATCH 3/9] [v3] DM: crypto/rsa: Add rsa Modular Exponentiation DM driver   Ruchika Gupta
    • [U-Boot] [PATCH 3/9] [v3] DM: crypto/rsa: Add rsa Modular Exponentiation DM driver   Simon Glass
  • [U-Boot] [PATCH 4/9] [v3] configs: Move CONFIG_FIT_SIGNATURE to defconfig   Ruchika Gupta
    • [U-Boot] [PATCH 4/9] [v3] configs: Move CONFIG_FIT_SIGNATURE to defconfig   Simon Glass
  • [U-Boot] [PATCH 5/9] [v3] lib/rsa: Modify rsa to use DM driver if available   Ruchika Gupta
    • [U-Boot] [PATCH 5/9] [v3] lib/rsa: Modify rsa to use DM driver if available   Simon Glass
  • [U-Boot] [PATCH 6/9] [v3] DM: crypto/fsl - Add Freescale rsa DM driver   Ruchika Gupta
    • [U-Boot] [PATCH 6/9] [v3] DM: crypto/fsl - Add Freescale rsa DM driver   Simon Glass
  • [U-Boot] [PATCH 7/9] [v3] lib/rsa: Add Kconfig option for HW accelerated RSA   Ruchika Gupta
    • [U-Boot] [PATCH 7/9] [v3] lib/rsa: Add Kconfig option for HW accelerated RSA   Simon Glass
      • [U-Boot] [PATCH 7/9] [v3] lib/rsa: Add Kconfig option for HW accelerated RSA   Ruchika Gupta
      • [U-Boot] [PATCH 7/9] [v3] lib/rsa: Add Kconfig option for HW accelerated RSA   Simon Glass
  • [U-Boot] [PATCH 8/9] [v3] hash: Add function to find hash_algo struct with progressive hash   Ruchika Gupta
    • [U-Boot] [PATCH 8/9] [v3] hash: Add function to find hash_algo struct with progressive hash   Simon Glass
      • [U-Boot] [PATCH 8/9] [v3] hash: Add function to find hash_algo struct with progressive hash   Ruchika Gupta
      • [U-Boot] [PATCH 8/9] [v3] hash: Add function to find hash_algo struct with progressive hash   Simon Glass
      • [U-Boot] [PATCH 8/9] [v3] hash: Add function to find hash_algo struct with progressive hash   Ruchika Gupta
  • [U-Boot] [PATCH 9/9] [v3] rsa: Use checksum algorithms from struct hash_algo   Ruchika Gupta
    • [U-Boot] [PATCH 9/9] [v3] rsa: Use checksum algorithms from struct hash_algo   Simon Glass
• [U-Boot] [PATCH 0/5] keymile: enhance IVM reading   Valentin Longchamp
  • [U-Boot] [PATCH 1/5] kirkwood/km_arm: read the IVM eeprom earlier   Valentin Longchamp
  • [U-Boot] [PATCH 2/5] 85xx/kmp204x: read the IVM eeprom earlier   Valentin Longchamp
  • [U-Boot] [PATCH 3/5] 83xx/km83xx: read the IVM eeprom earlier   Valentin Longchamp
  • [U-Boot] [PATCH 4/5] 82xx/km82xx: read the IVM eeprom earlier   Valentin Longchamp
  • [U-Boot] [PATCH 5/5] KM/IVM: remove ivm_read_eeprom(void)   Valentin Longchamp
• [U-Boot] buildman reports error of script/binutils-version.sh   Dirk Behme
  • [U-Boot] buildman reports error of script/binutils-version.sh   Masahiro Yamada
• [U-Boot] [PATCH 1/3] common: board: support systems with where RAM ends beyond 4GB   Stephen Warren
  • [U-Boot] [PATCH 1/3] common: board: support systems with where RAM ends beyond 4GB   Simon Glass
    • [U-Boot] [PATCH 1/3] common: board: support systems with where RAM ends beyond 4GB   Stephen Warren
      • [U-Boot] [PATCH 1/3] common: board: support systems with where RAM ends beyond 4GB   Simon Glass
• [U-Boot] [PATCH 2/3] ARM: tegra: fix variable naming in query_sdram_size()   Stephen Warren
  • [U-Boot] [PATCH 2/3] ARM: tegra: fix variable naming in query_sdram_size()   Simon Glass
• [U-Boot] [PATCH 3/3] ARM: tegra: support large RAM sizes   Stephen Warren
  • [U-Boot] [PATCH 3/3] ARM: tegra: support large RAM sizes   Simon Glass
    • [U-Boot] [PATCH 3/3] ARM: tegra: support large RAM sizes   Stephen Warren
      • [U-Boot] [PATCH 3/3] ARM: tegra: support large RAM sizes   Simon Glass
• [U-Boot] [PATCH 0/9] Remove use of gdata for global_data   Simon Glass
  • [U-Boot] [PATCH 0/9] Remove use of gdata for global_data   Ian Campbell
• [U-Boot] [PATCH 1/9] arm: Add warnings about using gdata   Simon Glass
  • [U-Boot] [PATCH 1/9] arm: Add warnings about using gdata   Igor Grinberg
    • [U-Boot] [PATCH 1/9] arm: Add warnings about using gdata   Simon Glass
      • [U-Boot] [PATCH 1/9] arm: Add warnings about using gdata   Igor Grinberg
      • [U-Boot] [PATCH 1/9] arm: Add warnings about using gdata   Simon Glass
• [U-Boot] [PATCH 2/9] sunxi: Move SPL s_init() code to board_init_f()   Simon Glass
  • [U-Boot] [PATCH 2/9] sunxi: Move SPL s_init() code to board_init_f()   Ian Campbell
    • [U-Boot] [PATCH 2/9] sunxi: Move SPL s_init() code to board_init_f()   Simon Glass
• [U-Boot] [PATCH 3/9] sunxi: Drop use of lowlevel_init()   Simon Glass
  • [U-Boot] [PATCH 3/9] sunxi: Drop use of lowlevel_init()   Ian Campbell
• [U-Boot] [PATCH 4/9] arm: Reduce the scope of lowlevel_init()   Simon Glass
• [U-Boot] [PATCH 5/9] zynq: Remove reference to gdata   Simon Glass
• [U-Boot] [PATCH 6/9] imx: cm_fx6: Remove reference to gdata   Simon Glass
  • [U-Boot] [PATCH 6/9] imx: cm_fx6: Remove reference to gdata   Igor Grinberg
  • [U-Boot] [PATCH 6/9] imx: cm_fx6: Remove reference to gdata   Nikita Kiryanov
• [U-Boot] [PATCH 7/9] imx: woodburn: Remove reference to gdata   Simon Glass
  • [U-Boot] [PATCH 7/9] imx: woodburn: Remove reference to gdata   Stefano Babic
• [U-Boot] [PATCH 8/9] imx: ls102xa: Remove reference to gdata   Simon Glass
• [U-Boot] [PATCH 9/9] arm: Drop gdata global_data variable in SPL   Simon Glass
• [U-Boot] mystery boot code in MPC8247-based device   Ben Gelb
• [U-Boot] [PATCH] devkit8000: convert to use generic board code   Anthoine Bourgeois
  • [U-Boot] [PATCH] devkit8000: convert to use generic board code   Anthoine Bourgeois
    • [U-Boot] [PATCH] devkit8000: convert to use generic board code   Anthoine Bourgeois
• [U-Boot] [PATCH 1/4] vexpress64: take over maintenance of the semi vexpress64   Linus Walleij
  • [U-Boot] [PATCH 1/4] vexpress64: take over maintenance of the semi vexpress64   Steve Rae
  • [U-Boot] [U-Boot, 1/4] vexpress64: take over maintenance of the semi vexpress64   Tom Rini
• [U-Boot] [PATCH 2/4] vexpress64: switch to generic board   Linus Walleij
  • [U-Boot] [PATCH 2/4] vexpress64: switch to generic board   Steve Rae
  • [U-Boot] [PATCH 2/4] vexpress64: switch to generic board   Simon Glass
  • [U-Boot] [U-Boot,2/4] vexpress64: switch to generic board   Tom Rini
• [U-Boot] [PATCH 3/4] vexpress64: get rid of CONFIG_SYS_EXTRA_OPTIONS   Linus Walleij
  • [U-Boot] [PATCH 3/4] vexpress64: get rid of CONFIG_SYS_EXTRA_OPTIONS   Steve Rae
  • [U-Boot] [PATCH 3/4] vexpress64: get rid of CONFIG_SYS_EXTRA_OPTIONS   Tom Rini
• [U-Boot] [PATCH 4/4] vexpress64: support the Juno Development Platform   Linus Walleij
  • [U-Boot] [PATCH 4/4] vexpress64: support the Juno Development Platform   Tom Rini
• [U-Boot] [PATCH 1/2] ARM: rpi: support model A+   Stephen Warren
  • [U-Boot] [U-Boot,1/2] ARM: rpi: support model A+   Tom Rini
• [U-Boot] [PATCH 2/2] ARM: rpi: consolidate board rev error checking   Stephen Warren
  • [U-Boot] [U-Boot, 2/2] ARM: rpi: consolidate board rev error checking   Tom Rini
• [U-Boot] [PATCH 1/5] x86: Remove include directory in arch/x86/dts   Bin Meng
  • [U-Boot] [PATCH 2/5] x86: Remove alex.dts in arch/x86/dts   Bin Meng
    • [U-Boot] [PATCH 2/5] x86: Remove alex.dts in arch/x86/dts   Simon Glass
      • [U-Boot] [PATCH 2/5] x86: Remove alex.dts in arch/x86/dts   Simon Glass
  • [U-Boot] [PATCH 3/5] x86: Rename coreboot.dsti to serial.dtsi   Bin Meng
    • [U-Boot] [PATCH 3/5] x86: Rename coreboot.dsti to serial.dtsi   Simon Glass
      • [U-Boot] [PATCH 3/5] x86: Rename coreboot.dsti to serial.dtsi   Simon Glass
  • [U-Boot] [PATCH 4/5] x86: Clean up the board dts files   Bin Meng
    • [U-Boot] [PATCH 4/5] x86: Clean up the board dts files   Simon Glass
      • [U-Boot] [PATCH 4/5] x86: Clean up the board dts files   Simon Glass
  • [U-Boot] [PATCH 5/5] x86: Only compile dts file for a specific board   Bin Meng
    • [U-Boot] [PATCH 5/5] x86: Only compile dts file for a specific board   Simon Glass
      • [U-Boot] [PATCH 5/5] x86: Only compile dts file for a specific board   Bin Meng
  • [U-Boot] [PATCH 1/5] x86: Remove include directory in arch/x86/dts   Simon Glass
    • [U-Boot] [PATCH 1/5] x86: Remove include directory in arch/x86/dts   Bin Meng
      • [U-Boot] [PATCH 1/5] x86: Remove include directory in arch/x86/dts   Simon Glass
      • [U-Boot] [PATCH 1/5] x86: Remove include directory in arch/x86/dts   Bin Meng
• [U-Boot] [PATCH] sunxi: Fix buggy sun6i/sun8i DRAM size detection logic   Siarhei Siamashka
  • [U-Boot] [PATCH] sunxi: Fix buggy sun6i/sun8i DRAM size detection logic   Siarhei Siamashka
    • [U-Boot] [PATCH] sunxi: Fix buggy sun6i/sun8i DRAM size detection logic   Siarhei Siamashka
      • [U-Boot] [PATCH] sunxi: Fix buggy sun6i/sun8i DRAM size detection logic   Hans de Goede
      • [U-Boot] [PATCH] sunxi: Fix buggy sun6i/sun8i DRAM size detection logic   Siarhei Siamashka
      • [U-Boot] [PATCH] sunxi: Fix buggy sun6i/sun8i DRAM size detection logic   Hans de Goede
  • [U-Boot] [PATCH] sunxi: Fix buggy sun6i/sun8i DRAM size detection logic   Hans de Goede
• [U-Boot] sunxi: video: Add LCD output and A13-Olinuxino VGA output support   Hans de Goede
  • [U-Boot] [PATCH 01/17] videomodes: Add support for refresh and pclk_khz to video_get_params()   Hans de Goede
    • [U-Boot] [PATCH 01/17] videomodes: Add support for refresh and pclk_khz to video_get_params()   Ian Campbell
  • [U-Boot] [PATCH 02/17] sunxi: gpio: Properly sort mux defines by port number   Hans de Goede
    • [U-Boot] [PATCH 02/17] sunxi: gpio: Properly sort mux defines by port number   Ian Campbell
  • [U-Boot] [PATCH 03/17] sunxi: gpio: Add support for gpio pins on the AXP209 pmic   Hans de Goede
    • [U-Boot] [PATCH 03/17] sunxi: gpio: Add support for gpio pins on the AXP209 pmic   Ian Campbell
      • [U-Boot] [PATCH 03/17] sunxi: gpio: Add support for gpio pins on the AXP209 pmic   Hans de Goede
  • [U-Boot] [PATCH 05/17] sunxi: video: Improve monitor video-mode option handling   Hans de Goede
    • [U-Boot] [PATCH 05/17] sunxi: video: Improve monitor video-mode option handling   Ian Campbell
      • [U-Boot] [PATCH 05/17] sunxi: video: Improve monitor video-mode option handling   Hans de Goede
  • [U-Boot] [PATCH 06/17] sunxi: video: Prepare for lcd support   Hans de Goede
    • [U-Boot] [PATCH 06/17] sunxi: video: Prepare for lcd support   Ian Campbell
  • [U-Boot] [PATCH 07/17] sunxi: video: Modify sunxi_lcdc_pll_set to work with both tcon0 and tcon1   Hans de Goede
    • [U-Boot] [PATCH 07/17] sunxi: video: Modify sunxi_lcdc_pll_set to work with both tcon0 and tcon1   Ian Campbell
  • [U-Boot] [PATCH 08/17] sunxi: video: Move sunxi_drc_init   Hans de Goede
    • [U-Boot] [PATCH 08/17] sunxi: video: Move sunxi_drc_init   Chen-Yu Tsai
      • [U-Boot] [PATCH 08/17] sunxi: video: Move sunxi_drc_init   Hans de Goede
      • [U-Boot] [PATCH 08/17] sunxi: video: Move sunxi_drc_init   Ian Campbell
  • [U-Boot] [PATCH 09/17] sunxi: video: Add lcd output support   Hans de Goede
    • [U-Boot] [PATCH 09/17] sunxi: video: Add lcd output support   Ian Campbell
      • [U-Boot] [PATCH 09/17] sunxi: video: Add lcd output support   Hans de Goede
  • [U-Boot] [PATCH 10/17] sunxi: video: Add suppport SoCs without HDMI, e.g. the A13 and A23   Hans de Goede
    • [U-Boot] [PATCH 10/17] sunxi: video: Add suppport SoCs without HDMI, e.g. the A13 and A23   Ian Campbell
      • [U-Boot] [PATCH 10/17] sunxi: video: Add suppport SoCs without HDMI, e.g. the A13 and A23   Hans de Goede
  • [U-Boot] [PATCH 11/17] sunxi: video: Add support for VGA via external DACs connected to the LCD pins   Hans de Goede
    • [U-Boot] [PATCH 11/17] sunxi: video: Add support for VGA via external DACs connected to the LCD pins   Ian Campbell
      • [U-Boot] [PATCH 11/17] sunxi: video: Add support for VGA via external DACs connected to the LCD pins   Hans de Goede
      • [U-Boot] [PATCH 11/17] sunxi: video: Add support for VGA via external DACs connected to the LCD pins   Chen-Yu Tsai
      • [U-Boot] [PATCH 11/17] sunxi: video: Add support for VGA via external DACs connected to the LCD pins   Hans de Goede
  • [U-Boot] [PATCH 12/17] sunxi: sunxi-common.h: Reduce bootm_size to take the framebuffer into account   Hans de Goede
    • [U-Boot] [PATCH 12/17] sunxi: sunxi-common.h: Reduce bootm_size to take the framebuffer into account   Ian Campbell
  • [U-Boot] [PATCH 13/17] sunxi: A13-OLinuXino defconfigs: Enable VGA output, add lcd-mode for 7" LCD   Hans de Goede
    • [U-Boot] [PATCH 13/17] sunxi: A13-OLinuXino defconfigs: Enable VGA output, add lcd-mode for 7" LCD   Ian Campbell
  • [U-Boot] [PATCH 14/17] sunxi: Add 2 defconfigs for using the Olimex 7" lcd with olinuxino boards   Hans de Goede
    • [U-Boot] [PATCH 14/17] sunxi: Add 2 defconfigs for using the Olimex 7" lcd with olinuxino boards   Ian Campbell
      • [U-Boot] [PATCH 14/17] sunxi: Add 2 defconfigs for using the Olimex 7" lcd with olinuxino boards   Hans de Goede
      • [U-Boot] [PATCH 14/17] sunxi: Add 2 defconfigs for using the Olimex 7" lcd with olinuxino boards   Ian Campbell
  • [U-Boot] [PATCH 15/17] sunxi: Ippo_q8h defconfigs: Enable the LCD panel found on these tablets.   Hans de Goede
    • [U-Boot] [PATCH 15/17] sunxi: Ippo_q8h defconfigs: Enable the LCD panel found on these tablets.   Chen-Yu Tsai
      • [U-Boot] [PATCH 15/17] sunxi: Ippo_q8h defconfigs: Enable the LCD panel found on these tablets.   Hans de Goede
      • [U-Boot] [PATCH 15/17] sunxi: Ippo_q8h defconfigs: Enable the LCD panel found on these tablets.   Chen-Yu Tsai
      • [U-Boot] [PATCH 15/17] sunxi: Ippo_q8h defconfigs: Enable the LCD panel found on these tablets.   Hans de Goede
      • [U-Boot] [PATCH 15/17] sunxi: Ippo_q8h defconfigs: Enable the LCD panel found on these tablets.   Ian Campbell
      • [U-Boot] [PATCH 15/17] sunxi: Ippo_q8h defconfigs: Enable the LCD panel found on these tablets.   Chen-Yu Tsai
      • [U-Boot] [PATCH 15/17] sunxi: Ippo_q8h defconfigs: Enable the LCD panel found on these tablets.   Hans de Goede
      • [U-Boot] [PATCH 15/17] sunxi: Ippo_q8h defconfigs: Enable the LCD panel found on these tablets.   Siarhei Siamashka
      • [U-Boot] [PATCH 15/17] sunxi: Ippo_q8h defconfigs: Enable the LCD panel found on these tablets.   Hans de Goede
      • [U-Boot] [PATCH 15/17] sunxi: Ippo_q8h defconfigs: Enable the LCD panel found on these tablets.   Hans de Goede
      • [U-Boot] [PATCH 15/17] sunxi: Ippo_q8h defconfigs: Enable the LCD panel found on these tablets.   Siarhei Siamashka
      • [U-Boot] [PATCH 15/17] sunxi: Ippo_q8h defconfigs: Enable the LCD panel found on these tablets.   Hans de Goede
      • [U-Boot] [PATCH 15/17] sunxi: Ippo_q8h defconfigs: Enable the LCD panel found on these tablets.   Siarhei Siamashka
      • [U-Boot] [PATCH 15/17] sunxi: Ippo_q8h defconfigs: Enable the LCD panel found on these tablets.   Hans de Goede
  • [U-Boot] [PATCH 16/17] sunxi: video: Remove sunxi_display.enabled variable   Hans de Goede
    • [U-Boot] [PATCH 16/17] sunxi: video: Remove sunxi_display.enabled variable   Ian Campbell
  • [U-Boot] [PATCH 17/17] sunxi: video: Use sunxi_lcdc_get_clk_delay to calculate tcon1 delay   Hans de Goede
    • [U-Boot] [PATCH 17/17] sunxi: video: Use sunxi_lcdc_get_clk_delay to calculate tcon1 delay   Ian Campbell
• [U-Boot] [PATCH 04/17] sunxi: video: Drop disabling of backend / lcdc / hdmi encoder on modeset   Hans de Goede
  • [U-Boot] [PATCH 04/17] sunxi: video: Drop disabling of backend / lcdc / hdmi encoder on modeset   Ian Campbell
• [U-Boot] [PATCH] sunxi: Fix CONFIG_UART0_PORT_F build and add it to menuconfig   Siarhei Siamashka
  • [U-Boot] [PATCH] sunxi: Fix CONFIG_UART0_PORT_F build and add it to menuconfig   Hans de Goede
• [U-Boot] [PATCH] scripts: fix binutils-version.sh   Masahiro Yamada
  • [U-Boot] [PATCH] scripts: fix binutils-version.sh   Dirk Behme
  • [U-Boot] scripts: fix binutils-version.sh   Tom Rini
• [U-Boot] [PATCH v2 0/4] i2c: UniPhier: add I2C drivers based on driver model   Masahiro Yamada
• [U-Boot] [PATCH v2 1/4] i2c: UniPhier: add driver for UniPhier i2c controller   Masahiro Yamada
• [U-Boot] [PATCH v2 2/4] i2c: UniPhier: add driver for UniPhier FIFO-builtin i2c controller   Masahiro Yamada
• [U-Boot] [PATCH v2 3/4] ARM: UniPhier: enable I2C for UniPhier SoCs   Masahiro Yamada
• [U-Boot] [PATCH v2 4/4] ARM: UniPhier: enable CONFIG_I2C_EEPROM   Masahiro Yamada
• [U-Boot] [PATCH 0/2] Fix some corner cases in bus width setting   Andrew Gabbasov
  • [U-Boot] [PATCH 2/2] mmc: Skip changing bus width for MMC cards earlier than version 4.0   Andrew Gabbasov
• [U-Boot] [PATCH 1/2] mmc: Avoid redundant switching to 1-bit bus width for MMC cards   Andrew Gabbasov
• [U-Boot] Pull request: u-boot-sh/rmolbile   Nobuhiro Iwamatsu
  • [U-Boot] Pull request: u-boot-sh/rmolbile   Tom Rini
• [U-Boot] [PATCH v3 0/4] i2c: UniPhier: add I2C drivers based on driver model   Masahiro Yamada
• [U-Boot] [PATCH v3 1/4] i2c: UniPhier: add driver for UniPhier i2c controller   Masahiro Yamada
• [U-Boot] [PATCH v3 2/4] i2c: UniPhier: add driver for UniPhier FIFO-builtin i2c controller   Masahiro Yamada
• [U-Boot] [PATCH v3 3/4] ARM: UniPhier: enable I2C for UniPhier SoCs   Masahiro Yamada
• [U-Boot] [PATCH v3 4/4] ARM: UniPhier: enable CONFIG_I2C_EEPROM   Masahiro Yamada
• [U-Boot] [PATCH] ls102xa: fdt: Disable QSPI and DSPI in NOR/NAND/SD boot   Alison Wang
• [U-Boot] [PATCH] cmd_bdinfo: check for CONFIG_ARC instead of CONFIG_ARC700   Alexey Brodkin
• [U-Boot] [PATCH] arc: introduce "mdbtrick" target   Alexey Brodkin
  • [U-Boot] [PATCH] arc: introduce "mdbtrick" target   Wolfgang Denk
    • [U-Boot] [PATCH] arc: introduce "mdbtrick" target   Alexey Brodkin
      • [U-Boot] [PATCH] arc: introduce "mdbtrick" target   Wolfgang Denk
• [U-Boot] [PATCH 0/2] mtd: nand: fix two problems related to BBT scan   Masahiro Yamada
  • [U-Boot] [PATCH 1/2] mtd: nand: Mark the BBT as scanned prior to calling scan_bbt again   Masahiro Yamada
• [U-Boot] [PATCH 2/2] mtd: nand: do not scan BBT after scrub   Masahiro Yamada
• [U-Boot] [PATCH 1/2] sun6i: Add defconfig for MSI Primo81 tablet   Siarhei Siamashka
  • [U-Boot] [PATCH 2/2] sun7i: Add defconfig for MSI Primo73 tablet   Siarhei Siamashka
  • [U-Boot] [PATCH 1/2] sun6i: Add defconfig for MSI Primo81 tablet   Hans de Goede
    • [U-Boot] [PATCH 1/2] sun6i: Add defconfig for MSI Primo81 tablet   Siarhei Siamashka
• [U-Boot] [PATCH v2 0/7] x86: Support pci based uart as the U-Boot serial console   Bin Meng
  • [U-Boot] [PATCH v2 1/7] x86: Add missing DECLARE_GLOBAL_DATA_PTR for pci.c   Bin Meng
    • [U-Boot] [PATCH v2 1/7] x86: Add missing DECLARE_GLOBAL_DATA_PTR for pci.c   Simon Glass
  • [U-Boot] [PATCH v2 2/7] x86: Support pci bus scan in the early phase   Bin Meng
    • [U-Boot] [PATCH v2 2/7] x86: Support pci bus scan in the early phase   Simon Glass
  • [U-Boot] [PATCH v2 3/7] pci: Make pci apis usable before relocation   Bin Meng
    • [U-Boot] [PATCH v2 3/7] pci: Make pci apis usable before relocation   Simon Glass
  • [U-Boot] [PATCH v2 4/7] fdt: Add several apis to decode pci device node   Bin Meng
    • [U-Boot] [PATCH v2 4/7] fdt: Add several apis to decode pci device node   Simon Glass
      • [U-Boot] [PATCH v2 4/7] fdt: Add several apis to decode pci device node   Bin Meng
  • [U-Boot] [PATCH v2 5/7] serial: ns16550: Support ns16550 compatible pci uart devices   Bin Meng
    • [U-Boot] [PATCH v2 5/7] serial: ns16550: Support ns16550 compatible pci uart devices   Simon Glass
      • [U-Boot] [PATCH v2 5/7] serial: ns16550: Support ns16550 compatible pci uart devices   Bin Meng
      • [U-Boot] [PATCH v2 5/7] serial: ns16550: Support ns16550 compatible pci uart devices   Simon Glass
  • [U-Boot] [PATCH v2 6/7] x86: Use ePAPR defined properties for x86-uart   Bin Meng
    • [U-Boot] [PATCH v2 6/7] x86: Use ePAPR defined properties for x86-uart   Simon Glass
      • [U-Boot] [PATCH v2 6/7] x86: Use ePAPR defined properties for x86-uart   Bin Meng
      • [U-Boot] [PATCH v2 6/7] x86: Use ePAPR defined properties for x86-uart   Simon Glass
  • [U-Boot] [PATCH v2 7/7] x86: crownbay: Add pci devices in the dts file   Bin Meng
    • [U-Boot] [PATCH v2 7/7] x86: crownbay: Add pci devices in the dts file   Simon Glass
• [U-Boot] [PATCH 0/4] sunxi: video: native vga support   Hans de Goede
  • [U-Boot] [PATCH 1/4] sunxi: video: Fix tcon0 hsync / vsync setting   Hans de Goede
    • [U-Boot] [PATCH 1/4] sunxi: video: Fix tcon0 hsync / vsync setting   Ian Campbell
  • [U-Boot] [PATCH 2/4] sunxi: video: Add support for using PORTD hsync/vsync pins with tcon1   Hans de Goede
    • [U-Boot] [PATCH 2/4] sunxi: video: Add support for using PORTD hsync/vsync pins with tcon1   Ian Campbell
  • [U-Boot] [PATCH 3/4] sunxi: video: Fallback from HDMI to VGA on boards with VGA   Hans de Goede
  • [U-Boot] [PATCH 4/4] sunxi: video: Add VGA output support   Hans de Goede
    • [U-Boot] [PATCH 4/4] sunxi: video: Add VGA output support   Ian Campbell
      • [U-Boot] [PATCH 4/4] sunxi: video: Add VGA output support   Hans de Goede
• [U-Boot] [PATCH v2] sunxi: video: Fallback from HDMI to VGA on boards with VGA   Hans de Goede
  • [U-Boot] [PATCH v2] sunxi: video: Fallback from HDMI to VGA on boards with VGA   Ian Campbell
• [U-Boot] [PATCH] sunxi: Fix PLL1 running at half speed on sun8i   Hans de Goede
  • [U-Boot] [PATCH] sunxi: Fix PLL1 running at half speed on sun8i   Ian Campbell
    • [U-Boot] [PATCH] sunxi: Fix PLL1 running at half speed on sun8i   Hans de Goede
• [U-Boot] [PATCH] pcm051: Add boot script support to pcm051   Matwey V. Kornilov
• [U-Boot] [PATCH] initcall: add explicit hint if initcall was relocated   Alexey Brodkin
  • [U-Boot] [PATCH] initcall: add explicit hint if initcall was relocated   Simon Glass
  • [U-Boot] initcall: add explicit hint if initcall was relocated   Tom Rini
• [U-Boot] [PATCH 01/22] x86: Correct XIP_ROM_SIZE   Simon Glass
• [U-Boot] [PATCH 0/22] x86: Add support for MTRRs   Simon Glass
• [U-Boot] [PATCH 02/22] x86: Drop RAMTOP Kconfig   Simon Glass
  • [U-Boot] [PATCH 02/22] x86: Drop RAMTOP Kconfig   Bin Meng
• [U-Boot] [PATCH 03/22] x86: Correct ifdtool microcode calculation   Simon Glass
  • [U-Boot] [PATCH 03/22] x86: Correct ifdtool microcode calculation   Bin Meng
    • [U-Boot] [PATCH 03/22] x86: Correct ifdtool microcode calculation   Bin Meng
• [U-Boot] [PATCH 04/22] x86: video: Add support for CONFIG_CONSOLE_SCROLL_LINES   Simon Glass
• [U-Boot] [PATCH 05/22] x86: config: Always scroll the display by 5 lines, for speed   Simon Glass
• [U-Boot] [PATCH 06/22] x86: video: Add a debug() to display the frame buffer address   Simon Glass
• [U-Boot] [PATCH 07/22] x86: pci: Don't return a vesa mode when there is not video   Simon Glass
• [U-Boot] [PATCH 08/22] x86: video: Add debug option to time the BIOS copy   Simon Glass
  • [U-Boot] [PATCH 08/22] x86: video: Add debug option to time the BIOS copy   Bin Meng
• [U-Boot] [PATCH 09/22] x86: ivybridge: Only run the Video BIOS when video is enabled   Simon Glass
  • [U-Boot] [PATCH 09/22] x86: ivybridge: Only run the Video BIOS when video is enabled   Bin Meng
• [U-Boot] [PATCH 10/22] x86: Use cache, don't clear the display in video BIOS   Simon Glass
• [U-Boot] [PATCH 11/22] x86: Tidy up VESA mode numbers   Simon Glass
• [U-Boot] [PATCH 12/22] x86: pci: Display vesa modes in hex   Simon Glass
  • [U-Boot] [PATCH 12/22] x86: pci: Display vesa modes in hex   Bin Meng
• [U-Boot] [PATCH 13/22] x86: ivybridge: Drop support for ROM caching   Simon Glass
• [U-Boot] [PATCH 14/22] x86: Add support for MTRRs   Simon Glass
  • [U-Boot] [PATCH 14/22] x86: Add support for MTRRs   Bin Meng
• [U-Boot] [PATCH 15/22] x86: ivybridge: Set up an MTRR for the video frame buffer   Simon Glass
  • [U-Boot] [PATCH 15/22] x86: ivybridge: Set up an MTRR for the video frame buffer   Bin Meng
• [U-Boot] [PATCH 16/22] x86: board_f: Adjust x86 boot order for performance   Simon Glass
  • [U-Boot] [PATCH 16/22] x86: board_f: Adjust x86 boot order for performance   Bin Meng
• [U-Boot] [PATCH 17/22] x86: ivybridge: Request MTRRs for DRAM regions   Simon Glass
• [U-Boot] [PATCH 18/22] x86: Commit the current MTRRs before relocation   Simon Glass
• [U-Boot] [PATCH 19/22] x86: ivybridge: Add a way to turn off the CAR   Simon Glass
  • [U-Boot] [PATCH 19/22] x86: ivybridge: Add a way to turn off the CAR   Bin Meng
• [U-Boot] [PATCH 20/22] x86: Disable CAR before relocation on platforms that need it   Simon Glass
  • [U-Boot] [PATCH 20/22] x86: Disable CAR before relocation on platforms that need it   Bin Meng
• [U-Boot] [PATCH 21/22] x86: ivybridge: Update microcode early in boot   Simon Glass
  • [U-Boot] [PATCH 21/22] x86: ivybridge: Update microcode early in boot   Bin Meng
    • [U-Boot] [PATCH 21/22] x86: ivybridge: Update microcode early in boot   Bin Meng
• [U-Boot] [PATCH 22/22] x86: Add an 'mtrr' command to list and adjust MTRRs   Simon Glass
  • [U-Boot] [PATCH 22/22] x86: Add an 'mtrr' command to list and adjust MTRRs   Bin Meng
• [U-Boot] [PATCH v2] sunxi: gpio: Add support for gpio pins on the AXP209 pmic   Hans de Goede
  • [U-Boot] [PATCH v2] sunxi: gpio: Add support for gpio pins on the AXP209 pmic   Ian Campbell
• [U-Boot] [PATCH v2] sunxi: video: Improve monitor video-mode option handling   Hans de Goede
  • [U-Boot] [PATCH v2] sunxi: video: Improve monitor video-mode option handling   Ian Campbell
• [U-Boot] [PATCH 1/2] Change e-mail address of Stefan Herbrechtsmeier   Stefan Herbrechtsmeier
• [U-Boot] [PATCH 2/2] ARM: kirkwood: dns325: Add generic board support   Stefan Herbrechtsmeier
• [U-Boot] [PATCH 1/2] sunxi: video: Add a hpd_delay parameter to configure hpd delay   Hans de Goede
  • [U-Boot] [PATCH 2/2] sunxi: clock_sun6i: Remove "magic" m and k params from clock_set_pll5   Hans de Goede
    • [U-Boot] [PATCH 2/2] sunxi: clock_sun6i: Remove "magic" m and k params from clock_set_pll5   Ian Campbell
  • [U-Boot] [PATCH 1/2] sunxi: video: Add a hpd_delay parameter to configure hpd delay   Ian Campbell
• [U-Boot] [PATCH 3/9] [v3] DM: crypto/rsa: Add rsa Modular Exponentiation DM driver   Ruchika Gupta
  • [U-Boot] [PATCH 3/9] [v3] DM: crypto/rsa: Add rsa Modular Exponentiation DM driver   Simon Glass
• [U-Boot] coreboot uboot qemu x86   Ajoy Das
  • [U-Boot] coreboot uboot qemu x86   Simon Glass
    • [U-Boot] coreboot uboot qemu x86   Ajoy Das
      • [U-Boot] coreboot uboot qemu x86   Simon Glass
      • [U-Boot] coreboot uboot qemu x86   Ajoy Das
      • [U-Boot] coreboot uboot qemu x86   Simon Glass
      • [U-Boot] coreboot uboot qemu x86   Ajoy Das
      • [U-Boot] coreboot uboot qemu x86   Ajoy Das
      • [U-Boot] Fwd: coreboot uboot qemu x86   Ajoy Das
      • [U-Boot] coreboot uboot qemu x86   Simon Glass
      • [U-Boot] Fwd: coreboot uboot qemu x86   Ajoy Das
      • [U-Boot] Fwd: coreboot uboot qemu x86   Ajoy Das
      • [U-Boot] coreboot uboot qemu x86   Simon Glass
• [U-Boot] [PATCH 5/9] [v3] lib/rsa: Modify rsa to use DM driver if available   Ruchika Gupta
  • [U-Boot] [PATCH 5/9] [v3] lib/rsa: Modify rsa to use DM driver if available   Simon Glass
• [U-Boot] [RFC PATCH] ARM: atmel: at91sam9m10g45ek: enable SPL   Bo Shen
• [U-Boot] [PATCH 9/9] [v3] rsa: Use checksum algorithms from struct hash_algo   Ruchika Gupta
• [U-Boot] [PATCH v2] arc: introduce "mdbtrick" target   Alexey Brodkin
• [U-Boot] fw_readenv not working with uboot.env stored on FAT partition BAD CRC   Christian Erhardt
• [U-Boot] Issue with uboot on imx6slevk   Arthur Lambert
  • [U-Boot] Issue with uboot on imx6slevk   Fabio Estevam
    • [U-Boot] Issue with uboot on imx6slevk   Fabio Estevam
      • [U-Boot] Issue with uboot on imx6slevk   Arthur Lambert
      • [U-Boot] Issue with uboot on imx6slevk   Fabio Estevam
      • [U-Boot] Issue with uboot on imx6slevk   Arthur Lambert
• [U-Boot] [PATCH] arm: fix exception vectors   Luca Ellero
• [U-Boot] Pull request: u-boot-spi/master   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH] mx6sxsabresd: Remove unneeded board_late_init()   Fabio Estevam
• [U-Boot] [PATCH v2 1/2] arm:mx6sx add QSPI support   Fabio Estevam
  • [U-Boot] [PATCH v2 1/2] arm:mx6sx add QSPI support   Jagan Teki
    • [U-Boot] [PATCH v2 1/2] arm:mx6sx add QSPI support   Jagan Teki
      • [U-Boot] [PATCH v2 1/2] arm:mx6sx add QSPI support   Fabio Estevam
      • [U-Boot] [PATCH v2 1/2] arm:mx6sx add QSPI support   Jagan Teki
      • [U-Boot] [PATCH v2 1/2] arm:mx6sx add QSPI support   Fabio Estevam
      • [U-Boot] [PATCH v2 1/2] arm:mx6sx add QSPI support   Peng Fan
• [U-Boot] [PATCH] mx6slevk: Remove get_board_rev()   Fabio Estevam
  • [U-Boot] [PATCH] mx6slevk: Remove get_board_rev()   Stefano Babic
• [U-Boot] FW: [PATCH 5/9] [v3] lib/rsa: Modify rsa to use DM driver if available   Simon Glass
• [U-Boot] [PATCH 5/9] [v3] lib/rsa: Modify rsa to use DM driver if available   Simon Glass
• [U-Boot] [PATCH 9/9] [v3] rsa: Use checksum algorithms from struct hash_algo   Simon Glass
  • [U-Boot] [PATCH 9/9] [v3] rsa: Use checksum algorithms from struct hash_algo   Ruchika Gupta
• [U-Boot] [PATCH v2] Exynos: Move down common USB configuration   Sjoerd Simons
  • [U-Boot] [PATCH v2] Exynos: Move down common USB configuration   Minkyu Kang
• [U-Boot] Please pull u-boot-x86.git branch misc   Simon Glass
  • [U-Boot] Please pull u-boot-x86.git branch misc   Tom Rini
• [U-Boot] [PATCH 0/10] Add support for caching Memory Reference Code data   Simon Glass
• [U-Boot] [PATCH 01/10] x86: dts: Add compatible string for Intel ICH9 SPI controller   Simon Glass
• [U-Boot] [PATCH 02/10] x86: Add checksum implementation   Simon Glass
• [U-Boot] [PATCH 03/10] x86: Add helpers to read/write CMOS RAM   Simon Glass
• [U-Boot] [PATCH 04/10] x86: spi: Add device tree support   Simon Glass
  • [U-Boot] [PATCH 04/10] x86: spi: Add device tree support   Jagan Teki
    • [U-Boot] [PATCH 04/10] x86: spi: Add device tree support   Simon Glass
• [U-Boot] [PATCH 05/10] Allow architecture-specific memory reservation   Simon Glass
• [U-Boot] [PATCH 06/10] x86: dts: Add SPI flash MRC details for chromebook_link   Simon Glass
• [U-Boot] [PATCH 07/10] x86: Implement a cache for Memory Reference Code parameters   Simon Glass
• [U-Boot] [PATCH 08/10] x86: config: Enable hook for saving MRC configuration   Simon Glass
• [U-Boot] [PATCH 09/10] x86: ivybridge: Drop the Kconfig MRC cache information   Simon Glass
• [U-Boot] [PATCH 10/10] x86: config: chromebook_link: Enable environment   Simon Glass
• [U-Boot] [ANN] U-Boot v2015.01-rc4 released   Tom Rini
• [U-Boot] [PATCH 0/10] x86: Add generic VESA video driver   Simon Glass
  • [U-Boot] [PATCH 01/10] bios_emulator: Fix an #ifdef typo in the header file   Simon Glass
  • [U-Boot] [PATCH 02/10] x86: Correct endianness isues in pci_rom   Simon Glass
  • [U-Boot] [PATCH 03/10] x86: Support ROMs on other archs   Simon Glass
  • [U-Boot] [PATCH 04/10] bios_emulator: Don't display error when emulator terminates   Simon Glass
  • [U-Boot] [PATCH 05/10] bios_emulator: Add some VESA interface debugging   Simon Glass
  • [U-Boot] [PATCH 06/10] x86: pci: Don't stop when we get a vendor/device mismatch   Simon Glass
  • [U-Boot] [PATCH 07/10] x86: Add a VESA video driver   Simon Glass
  • [U-Boot] [PATCH 08/10] x86: Drop the x86_fb driver   Simon Glass
  • [U-Boot] [PATCH 09/10] x86: Access the VGA ROM when needed   Simon Glass
  • [U-Boot] [PATCH 10/10] RFC: Test code for glacier PCI video support   Simon Glass
• [U-Boot] [PATCH] imx:mx6slevk add spi nor boot support   Peng Fan
  • [U-Boot] [PATCH] imx:mx6slevk add spi nor boot support   Jagan Teki
    • [U-Boot] [PATCH] imx:mx6slevk add spi nor boot support   Peng Fan
      • [U-Boot] [PATCH] imx:mx6slevk add spi nor boot support   Jagan Teki
• [U-Boot] [PATCH] x86: Simplify the fsp hob access functions   Bin Meng
  • [U-Boot] [PATCH] x86: Simplify the fsp hob access functions   Simon Glass
    • [U-Boot] [PATCH] x86: Simplify the fsp hob access functions   Bin Meng
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] [PATCH 0/6] imx:mx6 spl support for mx6sxsabresd   Peng Fan
  • [U-Boot] [PATCH 4/6] imx:mx6sx add dram io configure for mx6sx   Peng Fan
• [U-Boot] [PATCH 1/6] imx:mx6sxsabresd add spl config file   Peng Fan
• [U-Boot] [PATCH 2/6] imx:mx6sxsabresd select SUPPORT_SPL   Peng Fan
• [U-Boot] [PATCH 3/6] imx:mx6sxsabresd spl support in header file   Peng Fan
• [U-Boot] [PATCH 5/6] imx:mx6 add mx6sx in imx spl header file   Peng Fan
• [U-Boot] [PATCH 6/6] imx:mx6sxsabresd board spl support   Peng Fan
• [U-Boot] [PATCH 1/9] [v4] rsa: Split the rsa-verify to separate the modular exponentiation   Ruchika Gupta
  • [U-Boot] [PATCH 2/9] [v4] FIT: Modify option FIT_SIGNATURE in Kconfig   Ruchika Gupta
  • [U-Boot] [PATCH 3/9] [v4] DM: crypto/rsa: Add rsa Modular Exponentiation DM driver   Ruchika Gupta
  • [U-Boot] [PATCH 4/9] [v4] configs: Move CONFIG_FIT_SIGNATURE to defconfig   Ruchika Gupta
  • [U-Boot] [PATCH 5/9] [v4] lib/rsa: Modify rsa to use DM driver   Ruchika Gupta
  • [U-Boot] [PATCH 6/9] [v4] DM: crypto/fsl - Add Freescale rsa DM driver   Ruchika Gupta
  • [U-Boot] [PATCH 7/9] [v4] lib/rsa: Add Kconfig for devices supporting RSA Modular Exponentiation   Ruchika Gupta
  • [U-Boot] [PATCH 8/9] [v4] hash: Add function to find hash_algo struct with progressive hash   Ruchika Gupta
  • [U-Boot] [PATCH 9/9] [v4] rsa: Use checksum algorithms from struct hash_algo   Ruchika Gupta
• [U-Boot] [PATCH] phylib: add support for aquantia PHYs   shh.xie at gmail.com
• [U-Boot] v2015.01-rc4 REGRESSION: "scripts: fix binutils-version.sh" breaks things for non Linaro toolchains   Hans de Goede
  • [U-Boot] v2015.01-rc4 REGRESSION: "scripts: fix binutils-version.sh" breaks things for non Linaro toolchains   Tom Rini
• [U-Boot] Pull request: u-boot-uniphier   Masahiro YAMADA
• [U-Boot] [PATCH v3 0/7] x86: Support pci based uart as the U-Boot serial console   Bin Meng
  • [U-Boot] [PATCH v3 1/7] x86: Add missing DECLARE_GLOBAL_DATA_PTR for pci.c   Bin Meng
    • [U-Boot] [PATCH v3 1/7] x86: Add missing DECLARE_GLOBAL_DATA_PTR for pci.c   Simon Glass
  • [U-Boot] [PATCH v3 2/7] x86: Support pci bus scan in the early phase   Bin Meng
    • [U-Boot] [PATCH v3 2/7] x86: Support pci bus scan in the early phase   Simon Glass
  • [U-Boot] [PATCH v3 3/7] pci: Make pci apis usable before relocation   Bin Meng
    • [U-Boot] [PATCH v3 3/7] pci: Make pci apis usable before relocation   Simon Glass
  • [U-Boot] [PATCH v3 4/7] fdt: Add several apis to decode pci device node   Bin Meng
    • [U-Boot] [PATCH v3 4/7] fdt: Add several apis to decode pci device node   Simon Glass
      • [U-Boot] [PATCH v3 4/7] fdt: Add several apis to decode pci device node   Bin Meng
  • [U-Boot] [PATCH v3 5/7] serial: ns16550: Support ns16550 compatible pci uart devices   Bin Meng
    • [U-Boot] [PATCH v3 5/7] serial: ns16550: Support ns16550 compatible pci uart devices   Simon Glass
  • [U-Boot] [PATCH v3 6/7] x86: Use ePAPR defined properties for x86-uart   Bin Meng
  • [U-Boot] [PATCH v3 7/7] x86: crownbay: Add pci devices in the dts file   Bin Meng
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH v2 0/5] sun7i: PSCI enhancements   Jan Kiszka
  • [U-Boot] [PATCH v2 0/5] sun7i: PSCI enhancements   Ian Campbell
    • [U-Boot] [PATCH v2 0/5] sun7i: PSCI enhancements   Jan Kiszka
• [U-Boot] [PATCH v2 1/5] sunxi: Align PSCI stack calculation to comment   Jan Kiszka
• [U-Boot] [PATCH v2 2/5] sun7i: Add support for taking CPUs offline via PSCI   Jan Kiszka
• [U-Boot] [PATCH v2 3/5] sun7i: Add PSCI v0.2 support   Jan Kiszka
• [U-Boot] [PATCH v2 4/5] sun7i: Move psci_arch_init close to text_end   Jan Kiszka
• [U-Boot] [PATCH v2 5/5] sun7i: Implement PSCI v0.2 AFFINITY_INFO   Jan Kiszka
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PATCH v4 0/5] qspi: qspi support for mx6sxsabresd   Peng Fan
  • [U-Boot] [PATCH v4 1/5] QuadSPI: use QSPI_CMD_xx instead of flash opcodes   Peng Fan
  • [U-Boot] [PATCH v4 2/5] QuadSPI: use correct amba_base   Peng Fan
  • [U-Boot] [PATCH v4 3/5] arm:mx6sx add QSPI support   Peng Fan
  • [U-Boot] [PATCH v4 4/5] imx:qspi add 4K erase support   Peng Fan
  • [U-Boot] [PATCH v4 5/5] imx:mx6sxsabresd add qspi support   Peng Fan
  • [U-Boot] [PATCH v4 0/5] qspi: qspi support for mx6sxsabresd   Jagan Teki
    • [U-Boot] [PATCH v4 0/5] qspi: qspi support for mx6sxsabresd   Peng Fan
• [U-Boot] [PATCH v4 0/4] x86: Support pci based uart as the U-Boot serial console   Bin Meng
  • [U-Boot] [PATCH v4 1/4] fdt: Add several apis to decode pci device node   Bin Meng
    • [U-Boot] [PATCH v4 1/4] fdt: Add several apis to decode pci device node   Simon Glass
      • [U-Boot] [PATCH v4 1/4] fdt: Add several apis to decode pci device node   Simon Glass
  • [U-Boot] [PATCH v4 2/4] serial: ns16550: Support ns16550 compatible pci uart devices   Bin Meng
    • [U-Boot] [PATCH v4 2/4] serial: ns16550: Support ns16550 compatible pci uart devices   Simon Glass
  • [U-Boot] [PATCH v4 3/4] x86: Use ePAPR defined properties for x86-uart   Bin Meng
    • [U-Boot] [PATCH v4 3/4] x86: Use ePAPR defined properties for x86-uart   Simon Glass
  • [U-Boot] [PATCH v4 4/4] x86: crownbay: Add pci devices in the dts file   Bin Meng
    • [U-Boot] [PATCH v4 4/4] x86: crownbay: Add pci devices in the dts file   Simon Glass
      • [U-Boot] [PATCH v4 4/4] x86: crownbay: Add pci devices in the dts file   Simon Glass
• [U-Boot] [PATCH v2] x86: ahci: Make sure interface is not busy after enabling the port   Bin Meng
• [U-Boot] [PATCH] sun7i: Add new Bananapro board / defconfig   Hans de Goede
  • [U-Boot] [PATCH] sun7i: Add new Bananapro board / defconfig   Ian Campbell
    • [U-Boot] [PATCH] sun7i: Add new Bananapro board / defconfig   Hans de Goede
    • [U-Boot] [PATCH] sun7i: Add new Bananapro board / defconfig   Hans de Goede
• [U-Boot] [PATCH v2 1/2] sunxi: video: Add lcd output support   Hans de Goede
• [U-Boot] [PATCH v2 2/2] sunxi: video: Enable video on sun8i, which supports LCD but not HDMI   Hans de Goede
• [U-Boot] Bug in buildman?   Andreas Bießmann
• [U-Boot] [PATCH v3 0/4] sun7i: PSCI enhancements   Jan Kiszka
  • [U-Boot] [PATCH v3 2/4] sun7i: Add PSCI v0.2 support   Jan Kiszka
  • [U-Boot] [PATCH v3 3/4] sun7i: Move psci_arch_init close to text_end   Jan Kiszka
• [U-Boot] [PATCH v3 1/4] sun7i: Add support for taking CPUs offline via PSCI   Jan Kiszka
• [U-Boot] [PATCH v3 4/4] sun7i: Implement PSCI v0.2 AFFINITY_INFO   Jan Kiszka
• [U-Boot] [PATCH] arm: omap3: cm-t35: convert to generic board   Nikita Kiryanov
  • [U-Boot] [PATCH] arm: omap3: cm-t35: convert to generic board   Igor Grinberg
• [U-Boot] Make "usb start" only start / scan usb once ?   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH 00/12] arm: socfpga: Arria V support and fixes   Marek Vasut
  • [U-Boot] [PATCH 03/12] arm: socfpga: Sync Cyclone V DK PLL configuration   Marek Vasut
  • [U-Boot] [PATCH 05/12] arm: socfpga: Drop cyclone5 suffix from board file name   Marek Vasut
  • [U-Boot] [PATCH 07/12] dt: socfpga: Rename snps, dw-spi-mmio to snps, dw-apb-ssi   Marek Vasut
  • [U-Boot] [PATCH 08/12] dt: socfpga: Replace num-chipselect with num-cs   Marek Vasut
  • [U-Boot] [PATCH 09/12] dt: socfpga: Import and enable Cyclone V DK DTS   Marek Vasut
  • [U-Boot] [PATCH 10/12] dt: socfpga: Import and enable Arria V DK DTS   Marek Vasut
  • [U-Boot] [PATCH 11/12] arm: socfpga: Zap checkboard()   Marek Vasut
  • [U-Boot] [PATCH 12/12] arm: socfpga: Zap board_early_init_f()   Marek Vasut
• [U-Boot] [PATCH 01/12] arm: socfpga: Minor coding style fix   Marek Vasut
• [U-Boot] [PATCH 02/12] arm: socfpga: Sync Cyclone V DK pinmux configuration   Marek Vasut
• [U-Boot] [PATCH 04/12] arm: socfpga: Add USB and UDC support for Cyclone V DK   Marek Vasut
• [U-Boot] [PATCH 06/12] arm: socfpga: Add Altera Arria V DK support   Marek Vasut