[U-Boot] [PATCH 0/3] arm: vf610: Add QSPI support for VF610

[Huan Wang]

Hi, Jagan,

	I tested my driver based on your sf quad changes, and it is ok. For the sf quad functions, I didn' t test, because my driver doesn't support sf quad now.

        Thanks.

Best Regards,
Alison Wang

> -----Original Message-----
> From: Jagan Teki [mailto:jagannadha.sutradharudu-teki at xilinx.com]
> Sent: Monday, January 13, 2014 2:39 PM
> To: Wang Huan-B18965; jagannadha.sutradharudu-teki at xilinx.com;
> sbabic at denx.de
> Cc: u-boot at lists.denx.de
> Subject: Re: [PATCH 0/3] arm: vf610: Add QSPI support for VF610
> 
> Hi,
> 
> Thanks for the series.
> I will review once the today release done.
> 
> And is it possible to test these changes on sf quad changes, if OK will
> send the details.
> 
> On Monday 13 January 2014 11:02 AM, Alison Wang wrote:
> > This series contain QSPI support for Freescale Vybrid VF610.
> >
> > The QSPI(Quad Serial Peripheral Interface) acts as an interface to
> one
> > single or two external serial flash devices, each with up to 4
> bidirectional data lines.
> >
> > QSPI has a Look-update-table(LUT) which consists of a number of
> > pre-programmed sequences. Each sequence is basically a sequence of
> > instruction-operand pairs which when executed sequentially generates
> a valid serial flash transaction.
> >
> > This driver has been tested on VF610TWR.
> >
> > ----------------------------------------------------------------
> > Alison Wang (3):
> >        arm: imx: Add two macros for VF610 in IOMUX_PAD structure
> >        arm: vf610: Add QSPI support for VF610TWR
> >        arm: vf610: Add QSPI driver support
> >
> >   arch/arm/include/asm/arch-vf610/crm_regs.h    |  11 ++-
> >   arch/arm/include/asm/arch-vf610/imx-regs.h    |   4 +-
> >   arch/arm/include/asm/arch-vf610/iomux-vf610.h |  14 +++
> >   arch/arm/include/asm/imx-common/iomux-v3.h    |   2 +
> >   board/freescale/vf610twr/vf610twr.c           |  29 ++++++-
> >   drivers/spi/Makefile                          |   1 +
> >   drivers/spi/fsl_qspi.c                        | 482
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ++++++++++++++++++++++++++++++++
> >   drivers/spi/fsl_qspi.h                        | 127
> +++++++++++++++++++++++++++
> >   include/configs/vf610twr.h                    |  11 +++
> >   9 files changed, 677 insertions(+), 4 deletions(-)
> >   create mode 100644 drivers/spi/fsl_qspi.c
> >   create mode 100644 drivers/spi/fsl_qspi.h
> >
> >
> 
> --
> Thanks,
> Jagan.
> 
> 
> This email and any attachments are intended for the sole use of the
> named recipient(s) and contain(s) confidential information that may be
> proprietary, privileged or copyrighted under applicable law. If you are
> not the intended recipient, do not read, copy, or forward this email
> message or any attachments. Delete this email message and any
> attachments immediately.
> 
>