[U-Boot] [PATCH] powerpc/t104xrdb: Add basic ethernet support

Priyanka Jain Priyanka.Jain at freescale.com
Tue Jan 28 07:44:36 CET 2014


This covers only non-L2 switch ethernet interfaces i.e.
RGMII and SGMII interface for both 
-T1040RDB
-T1042RDB_PI

T1040RDB is configured as serdes protocol 0x66 which can
support following interfaces
-2 RGMIIS on DTSEC4, DTSEC5
-1 SGMII on DTSEC3

T1042RDB_PI is configured as serdes protocol 0x06 which can
support following interfaces
-2 RGMIIS on DTSEC4, DTSEC5


Signed-off-by: Poonam Aggrwal <poonam.aggrwal at freescale.com>
Signed-off-by: Priyanka Jain <Priyanka.Jain at freescale.com>
---
 board/freescale/t104xrdb/Makefile |    1 +
 board/freescale/t104xrdb/eth.c    |   72 +++++++++++++++++++++++++++++++++++++
 include/configs/T1040RDB.h        |    9 ++---
 include/configs/T1042RDB_PI.h     |    5 ++-
 4 files changed, 81 insertions(+), 6 deletions(-)
 create mode 100644 board/freescale/t104xrdb/eth.c

diff --git a/board/freescale/t104xrdb/Makefile b/board/freescale/t104xrdb/Makefile
index 76c0c94..e51fb7a 100644
--- a/board/freescale/t104xrdb/Makefile
+++ b/board/freescale/t104xrdb/Makefile
@@ -7,6 +7,7 @@
 
 obj-y	+= t104xrdb.o
 obj-y	+= ddr.o
+obj-y	+= eth.o
 obj-$(CONFIG_PCI)	+= pci.o
 obj-y	+= law.o
 obj-y	+= tlb.o
diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c
new file mode 100644
index 0000000..448434b
--- /dev/null
+++ b/board/freescale/t104xrdb/eth.c
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/immap_85xx.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <malloc.h>
+#include <asm/fsl_dtsec.h>
+
+#include "../common/fman.h"
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_FMAN_ENET
+	struct memac_mdio_info memac_mdio_info;
+	unsigned int i;
+	int phy_addr;
+	printf("Initializing Fman\n");
+
+	memac_mdio_info.regs =
+		(struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
+	memac_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+	/* Register the real 1G MDIO bus */
+	fm_memac_mdio_init(bis, &memac_mdio_info);
+
+	/*
+	 * Program on board RGMII, SGMII PHY addresses.
+	 */
+	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+		int idx = i - FM1_DTSEC1;
+
+		switch (fm_info_get_enet_if(i)) {
+#ifdef CONFIG_T1040RDB
+		case PHY_INTERFACE_MODE_SGMII:
+			/* T1040RDB only supports SGMII on DTSEC3 */
+			fm_info_set_phy_address(FM1_DTSEC3,
+						CONFIG_SYS_SGMII1_PHY_ADDR);
+#endif
+		case PHY_INTERFACE_MODE_RGMII:
+			if (FM1_DTSEC4 == i)
+				phy_addr = CONFIG_SYS_RGMII1_PHY_ADDR;
+			if (FM1_DTSEC5 == i)
+				phy_addr = CONFIG_SYS_RGMII2_PHY_ADDR;
+			fm_info_set_phy_address(i, phy_addr);
+			break;
+		case PHY_INTERFACE_MODE_QSGMII:
+			fm_info_set_phy_address(i, 0);
+			break;
+		case PHY_INTERFACE_MODE_NONE:
+			fm_info_set_phy_address(i, 0);
+			break;
+		default:
+			printf("Fman1: DTSEC%u set to unknown interface %i\n",
+			       idx + 1, fm_info_get_enet_if(i));
+			fm_info_set_phy_address(i, 0);
+			break;
+		}
+		fm_info_set_mdio(i,
+				 miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
+	}
+
+	cpu_eth_init(bis);
+#endif
+
+	return pci_eth_init(bis);
+}
diff --git a/include/configs/T1040RDB.h b/include/configs/T1040RDB.h
index 8784eac..de2df51 100644
--- a/include/configs/T1040RDB.h
+++ b/include/configs/T1040RDB.h
@@ -547,13 +547,12 @@
 #endif
 
 #ifdef CONFIG_FMAN_ENET
-#define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
-#define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
-#define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
-#define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
+#define CONFIG_SYS_SGMII1_PHY_ADDR		0x03
+#define CONFIG_SYS_RGMII1_PHY_ADDR		0x01
+#define CONFIG_SYS_RGMII2_PHY_ADDR		0x02
 
 #define CONFIG_MII		/* MII PHY management */
-#define CONFIG_ETHPRIME		"FM1 at DTSEC1"
+#define CONFIG_ETHPRIME		"FM1 at DTSEC4"
 #define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */
 #endif
 
diff --git a/include/configs/T1042RDB_PI.h b/include/configs/T1042RDB_PI.h
index cd18de5..c5c9a23 100644
--- a/include/configs/T1042RDB_PI.h
+++ b/include/configs/T1042RDB_PI.h
@@ -553,8 +553,11 @@
 #endif
 
 #ifdef CONFIG_FMAN_ENET
+#define CONFIG_SYS_RGMII1_PHY_ADDR		0x01
+#define CONFIG_SYS_RGMII2_PHY_ADDR		0x02
+
 #define CONFIG_MII		/* MII PHY management */
-#define CONFIG_ETHPRIME		"FM1 at DTSEC1"
+#define CONFIG_ETHPRIME		"FM1 at DTSEC4"
 #define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */
 #endif
 
-- 
1.7.4.1





More information about the U-Boot mailing list