[U-Boot] [PATCH 01/14] sunxi: dram: Remove useless 'dramc_scan_dll_para()' function

[Ian Campbell]

On Fri, 2014-07-18 at 19:22 +0300, Siarhei Siamashka wrote:
> The attempt to do DRAM parameters calibration in 'dramc_scan_dll_para()'
> function by trying different DLL adjustments and using the hardware
> DQS gate training result as a feedback is a great source of inspiration,
> but it just can't work properly the way it is implemented now. The fatal
> problem of this implementation is that the DQS gating window can be
> successfully found for almost every DLL delay adjustment setup that
> gets tried. Thus making it unable to see any real difference between
> 'good' and 'bad' settings.
> 
> Also this code was supposed to be only activated by setting the highest
> bit in the 'dram_tpr3' variable of the 'dram_para' struct (per-board dram
> configuration). But none of the linux-sunxi devices has ever used it for
> real. Basically, this code is just a dead weight.
> 
> Signed-off-by: Siarhei Siamashka <siarhei.siamashka at gmail.com>

Acked-by: Ian Campbell <ijc at hellion.org.uk>