[U-Boot] [U-boot] [Patch v3 2/3] common: cmd_nand: add nand ecclayout command

Ivan Khoronzhuk ivan.khoronzhuk at ti.com
Tue Jun 24 15:49:05 CEST 2014


From: WingMan Kwok <w-kwok2 at ti.com>

This commit adds a nand ecclayout command that allows the ecclayout of
the current nand device to be changed during run time. This feature is
useful when using u-boot to write something to nand flash that will be
read by other applications, such as ROM bootloader, that expects a
different ECC layout. In that case, change the current nand device
ecclayout using the "nand ecclayout set" command before writing the
data to nand flash.

Signed-off-by: WingMan Kwok <w-kwok2 at ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk at ti.com>
---
 common/cmd_nand.c | 91 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 doc/README.nand   | 12 ++++++++
 include/nand.h    |  7 +++++
 3 files changed, 110 insertions(+)

diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index a84f7dc..61d3fcc 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -462,6 +462,51 @@ static void adjust_size_for_badblocks(loff_t *size, loff_t offset, int dev)
 	}
 }
 
+#ifdef CONFIG_CMD_NAND_ECCLAYOUT
+static void nand_print_ecclayout_info(struct nand_ecclayout *layout)
+{
+	int i;
+	struct nand_oobfree *oobfree;
+
+	if (!layout)
+		return;
+
+	printf("  num ecc bytes: %d\n", layout->eccbytes);
+	puts("  ecc pos:\n    ");
+	for (i = 0; i < layout->eccbytes; i++) {
+		if (i && !(i % 8))
+			printf("\n    ");
+
+		printf("%4d ", layout->eccpos[i]);
+	}
+
+	puts("\n  oobfree:\n");
+	puts("    offset length\n");
+	oobfree = layout->oobfree;
+	for (i = 0; oobfree->length && i < MTD_MAX_OOBFREE_ENTRIES_LARGE; i++) {
+		printf("    %3d   %3d\n", oobfree->offset, oobfree->length);
+		oobfree++;
+	}
+}
+
+static void nand_print_device_ecclayout(int dev)
+{
+	int idx;
+	nand_info_t *nand = &nand_info[dev];
+	struct nand_chip *chip = nand->priv;
+
+	idx = board_nand_get_ecclayout_idx(chip, chip->ecc.layout);
+
+	if (idx < 0) {
+		puts("no ecc layout\n");
+		return;
+	}
+
+	printf("\necc layout %d:\n", idx);
+	nand_print_ecclayout_info(chip->ecc.layout);
+}
+#endif
+
 static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	int i, ret = 0;
@@ -830,6 +875,45 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	}
 #endif
 
+#ifdef CONFIG_CMD_NAND_ECCLAYOUT
+	if (strcmp(cmd, "ecclayout") == 0) {
+		int i;
+		struct nand_ecclayout *lt;
+		nand_info_t *nand = &nand_info[dev];
+
+		if (argc < 3) {
+			puts("Current device ecclayout:\n");
+			nand_print_device_ecclayout(dev);
+			return 0;
+		}
+
+		if (!strcmp(argv[2], "set")) {
+			if (argc < 4)
+				return 1;
+
+			i = (int)simple_strtoul(argv[3], NULL, 10);
+			if (board_nand_set_ecclayout(nand, i))
+				printf("Setting current device to ecc layout %d FAILED!\n", i);
+
+			return 0;
+		}
+
+		if (strcmp(argv[2], "all") != 0)
+			return 1;
+
+		/* show all available ecc layouts */
+		puts("Available ecc layouts:\n");
+
+		for (i = 0; (lt = board_nand_get_ecclayout(i)); i++) {
+
+			printf("\n ecc laytout %d:\n", i);
+			nand_print_ecclayout_info(lt);
+		}
+
+		return 0;
+	}
+#endif
+
 usage:
 	return CMD_RET_USAGE;
 }
@@ -884,6 +968,13 @@ static char nand_help_text[] =
 	"nand env.oob set off|partition - set enviromnent offset\n"
 	"nand env.oob get - get environment offset"
 #endif
+#ifdef CONFIG_CMD_NAND_ECCLAYOUT
+	"\n"
+	"nand ecclayout [all] - show ecclayout, 'all' shows all \n"
+	"    available ecc layouts for setting to current device\n"
+	"nand ecclayout set idx - sets current device ecc layout \n"
+	"    to layout indexed by idx\n"
+#endif
 	"";
 #endif
 
diff --git a/doc/README.nand b/doc/README.nand
index 70cf768..6fdce26 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -87,6 +87,15 @@ Commands:
       a packed sequence of "data, oob, data, oob, ..." -- no alignment of
       individual pages is maintained.
 
+   nand ecclayout [all]
+      Enabled by the CONFIG_CMD_NAND_ECCLAYOUT macro. This command show current
+      ecclayout, "all" shows all available ecc layouts for setting to current
+      device.
+
+   nand ecclayout set idx
+      Enabled by the CONFIG_CMD_NAND_ECCLAYOUT macro. This command set current
+      device ecc layout to layout indexed by idx.
+
 Configuration Options:
 
    CONFIG_CMD_NAND
@@ -208,6 +217,9 @@ Configuration Options:
 	drivers/mtd/nand/ndfc.c
 	drivers/mtd/nand/omap_gpmc.c
 
+   CONFIG_CMD_NAND_ECCLAYOUT
+        Enables support of nand ecclayout commands.
+
 
 Platform specific options
 =========================
diff --git a/include/nand.h b/include/nand.h
index fc735d1..a810626 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -155,6 +155,13 @@ void nand_deselect(void);
 void board_nand_select_device(struct nand_chip *nand, int chip);
 #endif
 
+int board_nand_get_ecclayout_idx(struct nand_chip *nand,
+				 struct nand_ecclayout *layout);
+
+struct nand_ecclayout *board_nand_get_ecclayout(int idx);
+
+int board_nand_set_ecclayout(struct mtd_info *mtd, int idx);
+
 __attribute__((noreturn)) void nand_boot(void);
 
 #endif
-- 
1.8.3.2



More information about the U-Boot mailing list