[U-Boot] Please pull mpc85xx

[York Sun]

Tom,

The following changes since commit 69c0d323e325f48f3124fb0696de3d68fcbcae8e:

  kbuild: Fix trailing whitespaces (2014-05-12 16:31:51 -0400)

are available in the git repository at:

  git://git.denx.de/u-boot-mpc85xx.git master

for you to fetch changes up to 8ad5d45e0044f5e64dbe7c6bd4e6aa0121a26b23:

  boards.cfg: fix a configuration error of ep8248 board (2014-05-13 11:00:01 -0500)

----------------------------------------------------------------
Alexander Graf (4):
      PPC 85xx QEMU: Always assume 1 core
      PPC 85xx QEMU: Don't use HID1
      powerpc/mpc85xx: Update TLB CAMs in relocated mode
      PPC 85xx QEMU: Make a generic board file

Aneesh Bansal (2):
      powerpc/mpc85xx: SECURE BOOT- secure boot target for t1040rdb
      powerpc/mpc85xx: SECURE BOOT- Add secure boot target for T2080RDB

Chunhe Lan (1):
      powerpc/85xx: Add T4240RDB board support

Masahiro Yamada (1):
      boards.cfg: fix a configuration error of ep8248 board

Shaohui Xie (1):
      powerpc/fman/memac: use default MDIO_HOLD value

Shaveta Leekha (2):
      board/freescale/common: ZM7300 driver
      board/b4qds: VID support

Shengzhou Liu (2):
      powerpc/t208x: enable errata A006261, A006593, A006379
      powerpc/85xx: add T4080 SoC support

Stefan Bigler (2):
      kmp204x: Add support for the unit LEDs
      kmp204x: handle dip-switch for factory settings

Valentin Longchamp (6):
      kmp204x: selftest/factory test pin support
      kmp204x: update the CONFIG_PRAM and CONFIG_KM_RESERVED_PRAM defines
      kmp204x: complete the reset sequence and PRST configuration
      kmp204x: update the RCW
      kmp204x: add workaround for A-004849
      kmp204x: enable the errata command

York Sun (6):
      powerpc/mpc8572ds: Increase u-boot size to 768KB
      powerpc/mpc85xx: Ignore FDT pointer for non-QEMU in cpu_init_early_f()
      powerpc/freescale: Change the return value of mac_read_from_eeprom()
      powerpc/mpc85xx: Fix boot_flag for calling board_init_f()
      powerpc/mpc86xx: Fix boot_flag for calling board_init_f()
      powerpc/freescale: Convert selected boards to generic board architecture

Zhao Qiang (1):
      qe: disable qe when qe-ucode fails to be uploaded for "deep sleep"

 arch/powerpc/cpu/mpc85xx/Makefile           |    2 +
 arch/powerpc/cpu/mpc85xx/cpu.c              |   24 +
 arch/powerpc/cpu/mpc85xx/cpu_init.c         |   17 +-
 arch/powerpc/cpu/mpc85xx/cpu_init_early.c   |    2 +
 arch/powerpc/cpu/mpc85xx/speed.c            |    3 +-
 arch/powerpc/cpu/mpc85xx/spl_minimal.c      |    4 +-
 arch/powerpc/cpu/mpc85xx/start.S            |    4 +-
 arch/powerpc/cpu/mpc85xx/t4240_ids.c        |    2 +
 arch/powerpc/cpu/mpc85xx/t4240_serdes.c     |    2 +-
 arch/powerpc/cpu/mpc86xx/start.S            |    1 +
 arch/powerpc/cpu/mpc8xxx/cpu.c              |    5 +-
 arch/powerpc/include/asm/config_mpc85xx.h   |   19 +-
 arch/powerpc/include/asm/fsl_errata.h       |    5 +
 arch/powerpc/include/asm/fsl_secure_boot.h  |    3 +-
 arch/powerpc/include/asm/immap_85xx.h       |    6 +-
 arch/powerpc/include/asm/processor.h        |    1 +
 board/freescale/b4860qds/b4860qds.c         |  240 +++++++++
 board/freescale/common/Makefile             |    1 +
 board/freescale/common/sys_eeprom.c         |    6 +-
 board/freescale/common/zm7300.c             |  235 +++++++++
 board/freescale/common/zm7300.h             |   22 +
 board/freescale/qemu-ppce500/qemu-ppce500.c |   20 +
 board/freescale/t4rdb/Makefile              |   12 +
 board/freescale/t4rdb/ddr.c                 |  118 +++++
 board/freescale/t4rdb/ddr.h                 |   78 +++
 board/freescale/t4rdb/eth.c                 |  146 ++++++
 board/freescale/t4rdb/law.c                 |   28 +
 board/freescale/t4rdb/pci.c                 |   23 +
 board/freescale/t4rdb/t4240rdb.c            |  125 +++++
 board/freescale/t4rdb/t4_pbi.cfg            |   31 ++
 board/freescale/t4rdb/t4_rcw.cfg            |    7 +
 board/freescale/t4rdb/t4rdb.h               |   18 +
 board/freescale/t4rdb/tlb.c                 |  111 ++++
 board/keymile/kmp204x/kmp204x.c             |   75 ++-
 board/keymile/kmp204x/kmp204x.h             |    3 +
 board/keymile/kmp204x/pbi.cfg               |   43 +-
 board/keymile/kmp204x/pci.c                 |   17 +-
 board/keymile/kmp204x/qrio.c                |   31 +-
 board/keymile/kmp204x/rcw_kmp204x.cfg       |    2 +-
 boards.cfg                                  |    7 +-
 drivers/mmc/fsl_esdhc.c                     |    2 +-
 drivers/net/fm/Makefile                     |    1 +
 drivers/net/fm/memac_phy.c                  |    8 +-
 drivers/qe/qe.c                             |    9 +-
 include/common.h                            |    5 +-
 include/configs/B4860QDS.h                  |   14 +
 include/configs/MPC8536DS.h                 |    2 +
 include/configs/MPC8572DS.h                 |    5 +-
 include/configs/MPC8641HPCN.h               |    3 +
 include/configs/T208xRDB.h                  |    1 +
 include/configs/T4240RDB.h                  |  752 +++++++++++++++++++++++++++
 include/configs/corenet_ds.h                |    3 +
 include/configs/km/kmp204x-common.h         |   17 +-
 include/configs/p1_p2_rdb_pc.h              |    3 +
 include/configs/qemu-ppce500.h              |    1 +
 include/configs/t4qds.h                     |    2 +
 56 files changed, 2257 insertions(+), 70 deletions(-)
 create mode 100644 board/freescale/common/zm7300.c
 create mode 100644 board/freescale/common/zm7300.h
 create mode 100644 board/freescale/t4rdb/Makefile
 create mode 100644 board/freescale/t4rdb/ddr.c
 create mode 100644 board/freescale/t4rdb/ddr.h
 create mode 100644 board/freescale/t4rdb/eth.c
 create mode 100644 board/freescale/t4rdb/law.c
 create mode 100644 board/freescale/t4rdb/pci.c
 create mode 100644 board/freescale/t4rdb/t4240rdb.c
 create mode 100644 board/freescale/t4rdb/t4_pbi.cfg
 create mode 100644 board/freescale/t4rdb/t4_rcw.cfg
 create mode 100644 board/freescale/t4rdb/t4rdb.h
 create mode 100644 board/freescale/t4rdb/tlb.c
 create mode 100644 include/configs/T4240RDB.h

Thanks,

York