[U-Boot] [PATCH v7 0/3] Adds support for Exynos5422 odroid xu3 board
Jaehoon Chung
jh80.chung at samsung.com
Thu Nov 13 06:55:30 CET 2014
On 11/13/2014 10:32 AM, Hyungwon Hwang wrote:
> This is v7 of the patchset adding support Odroud XU3 board.
>
> link to the previous version:
> v2: https://www.mail-archive.com/u-boot@lists.denx.de/msg152275.html
> v3: https://www.mail-archive.com/u-boot%40lists.denx.de/msg152677.html
> v4: https://patchwork.ozlabs.org/patch/407411/
> v5: https://patchwork.ozlabs.org/patch/407941/
> v6: https://patchwork.ozlabs.org/patch/408647/
>
> This patchset fixes GPIO information of Exynos5420 which is needed to
> support Exynos5422 Odroid XU3 board. On the base of the fixes, this
> patchset adds support for Exynos5422 Odroid XU3 board. I have done this
> work on the master branch in http://git.denx.de/u-boot-samsung.git (sha1:
> 26f195c71252e98aebfffd5cfa994a4475559370) with patches by Akshay Saraswat.
>
> link: https://patchwork.ozlabs.org/patch/405246/ (updated)
>
> How to test this patch:
> 1. git clone http://git.denx.de/u-boot-samsung.git
> 2. git reset --hard 26f195c71252e98aebfffd5cfa994a4475559370
> 3. Get and apply the patchset of Akshay Saraswat
> https://patchwork.ozlabs.org/patch/405246/
> https://patchwork.ozlabs.org/patch/405247/
> https://patchwork.ozlabs.org/patch/405248/
> https://patchwork.ozlabs.org/patch/405249/
> https://patchwork.ozlabs.org/patch/405250/
> https://patchwork.ozlabs.org/patch/405251/
> https://patchwork.ozlabs.org/patch/405252/
> 4. Apply this patchset
> 5. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- odroid-xu3_config
> 6. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- -j8
> 7. Now you can use u-boot-dtb.bin for your downloading
>
> Note: If you use micro SD card for your test you have to apply the below
> patch additionally. This patch is needed, because micro sd card is
> recognized as MMC1 instead of MMC0. Additional work is needed to make it
> work regardless of device id.
>
> diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h
> index ba591e7..437eaae 100644
> --- a/include/configs/exynos5-common.h
> +++ b/include/configs/exynos5-common.h
> @@ -109,7 +109,7 @@
>
> #define CONFIG_SYS_MONITOR_BASE 0x00000000
>
> -#define CONFIG_SYS_MMC_ENV_DEV 0
> +#define CONFIG_SYS_MMC_ENV_DEV 1
>
> #define CONFIG_SECURE_BL1_ONLY
>
> diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h
> index cda4f26..b46ccad 100644
> --- a/include/configs/odroid_xu3.h
> +++ b/include/configs/odroid_xu3.h
> @@ -110,15 +110,15 @@
> "run kernel_args;" \
> "bootz ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \
> "autoboot=" \
> - "if test -e mmc 0 Image.itb; then; " \
> + "if test -e mmc 1 Image.itb; then; " \
> "run boot_fit;" \
> - "elif test -e mmc 0 zImage; then; " \
> + "elif test -e mmc 1 zImage; then; " \
> "run boot_zimg;" \
> - "elif test -e mmc 0 uImage; then; " \
> + "elif test -e mmc 1 uImage; then; " \
> "run boot_uimg;" \
> "fi;\0" \
> "console=" CONFIG_DEFAULT_CONSOLE \
> - "mmcbootdev=0\0" \
> + "mmcbootdev=1\0" \
> "mmcbootpart=1\0" \
> "mmcrootdev=0\0" \
> "mmcrootpart=2\0" \
If you need to change the number of dev,
i recommend to add the environment parameter likes "sdbootdev = 1".
Best Regards,
Jaehoon Chung
>
>
> Changes for v2:
> - Add a patch to add new common setup header file for Odroid X2/U3
> and Odroid XU3
>
> Changes for v3:
> - Remove the patch which adds new common setup header file from v2
> - Remove the wrong patch to fix GPIO information of Exynos 5800
> - Remove unnecessary node from DT file
> - Remove unnecessary features from config file
> - Fix some trivial typos in comments
>
> Changes for v4:
> - Add MMC FIFO buffer's configuration to DT file
> - Make CONFIG_OF_CONTROL be set by the target information
> - Add basic document to doc/README.odroid-xu3
> - Add CONFIG_CMD_EXT4 to config file
> - Add environment size and offset to config file
> - Add extra default environment to make bootable without modification
> - Remove unnecessary features from config file
>
> Changes for v5:
> - Add the specific build instruction
> - Update the information of patchset by Akshay Saraswat
> - Convert /include/ to #include in DT file
>
> Changes for v6:
> - Separate out the documentation to new commit
> - Remove unnecessary header file inclusuib from the board-specific setup file
> - Make the function board_clock_init be declared, only when
> CONFIG_BOARD_EARLY_INIT_F is defined
>
> Changes for v7:
> - Fix several errata in the documentation
> - Remove OF_CONTROL dependency from !SPL_BUILD
>
> Hyungwon Hwang (3):
> exynos5: fix GPIO information of exynos5420
> Odroid-XU3: Add support for Odroid-XU3
> Odroid-XU3: Add documentation for Odroid-XU3
>
> arch/arm/cpu/armv7/exynos/Kconfig | 5 +
> arch/arm/dts/Makefile | 3 +-
> arch/arm/dts/exynos5422-odroidxu3.dts | 60 +++++++++
> arch/arm/include/asm/arch-exynos/cpu.h | 11 +-
> arch/arm/include/asm/arch-exynos/gpio.h | 232 +++++++++++++++-----------------
> board/samsung/odroid-xu3/Kconfig | 12 ++
> board/samsung/odroid-xu3/MAINTAINERS | 6 +
> board/samsung/odroid-xu3/Makefile | 7 +
> board/samsung/odroid-xu3/odroid-xu3.c | 122 +++++++++++++++++
> board/samsung/odroid-xu3/setup.h | 95 +++++++++++++
> configs/odroid-xu3_defconfig | 4 +
> doc/README.odroid-xu3 | 134 ++++++++++++++++++
> include/configs/odroid_xu3.h | 144 ++++++++++++++++++++
> 13 files changed, 708 insertions(+), 127 deletions(-)
> create mode 100644 arch/arm/dts/exynos5422-odroidxu3.dts
> create mode 100644 board/samsung/odroid-xu3/Kconfig
> create mode 100644 board/samsung/odroid-xu3/MAINTAINERS
> create mode 100644 board/samsung/odroid-xu3/Makefile
> create mode 100644 board/samsung/odroid-xu3/odroid-xu3.c
> create mode 100644 board/samsung/odroid-xu3/setup.h
> create mode 100644 configs/odroid-xu3_defconfig
> create mode 100644 doc/README.odroid-xu3
> create mode 100644 include/configs/odroid_xu3.h
>
More information about the U-Boot
mailing list