[U-Boot] [PATCH v6 0/5] add i.MX6 thermal sensor driver

[nitin.garg at freescale.com]

From: Nitin Garg <nitin.garg at freescale.com>

This patch set adds i.MX6 thermal sensor driver
and enables it for mx6sabre boards. Also adds
various anadig bit definitions as required for
upcoming drivers.

Changes in v6:
-Aligned imx thermal driver macro defines with kernel

Changes in v5:
-Don't modify the copyright of cpu.c and crm_regs.h file

Changes in v4:
-Added imx6 thermal sensor as a driver
-Renamed the config define to be more meaningful
-Move the clock code to clock.c
-Reusing ocotp driver for reading fuse
-Fix check for calibration fuse not programmed
-Aligned the slope computation with kernel
-Added Anadig register defines as seperate commit

Changes in v3:
-adds the mx6 thermal driver support
-adds the mx6 thermal support to mx6sabresd board.

Changes in v2:
-run checkpatch and fix reported issues

Nitin Garg (4):
  mx6: clock: Add api to enable pll3
  mx6: thermal: Add i.MX6 CPU thermal sensor support
  mx6: thermal: Check cpu temperature via thermal sensor
  mx6: thermal: Enable thermal sensor for mx6 sabre boards.

 arch/arm/cpu/armv7/mx6/clock.c        |   25 ++++++
 arch/arm/imx-common/cpu.c             |    6 ++
 arch/arm/include/asm/arch-mx6/clock.h |    1 +
 drivers/Makefile                      |    1 +
 drivers/thermal/Makefile              |    8 ++
 drivers/thermal/imx_thermal.c         |  144 +++++++++++++++++++++++++++++++++
 include/configs/mx6sabre_common.h     |    3 +-
 include/imx_thermal.h                 |   15 ++++
 8 files changed, 202 insertions(+), 1 deletion(-)
 create mode 100644 drivers/thermal/Makefile
 create mode 100644 drivers/thermal/imx_thermal.c
 create mode 100644 include/imx_thermal.h

-- 
1.7.9.5