[U-Boot] [PATCH v1 01/10] arm, at91, mpddrc: fix typo in ddr2_init()

Heiko Schocher hs at denx.de
Wed Oct 1 07:54:45 CEST 2014


use the configure value for computing the ba_off value
not the value from the cr register. This leaded in a
wrong ram configuration on the upcoming corvus spl board
support.

Signed-off-by: Heiko Schocher <hs at denx.de>
Cc: Andreas Bießmann <andreas.devel at googlemail.com>
Cc: Bo Shen <voice.shen at atmel.com>
---
 arch/arm/cpu/at91-common/mpddrc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/cpu/at91-common/mpddrc.c b/arch/arm/cpu/at91-common/mpddrc.c
index 8136396..76668d2 100644
--- a/arch/arm/cpu/at91-common/mpddrc.c
+++ b/arch/arm/cpu/at91-common/mpddrc.c
@@ -26,7 +26,8 @@ int ddr2_init(const unsigned int ram_address,
 	/* Compute bank offset according to NC in configuration register */
 	ba_off = (mpddr_value->cr & ATMEL_MPDDRC_CR_NC_MASK) + 9;
 	if (!(mpddr_value->cr & ATMEL_MPDDRC_CR_DECOD_INTERLEAVED))
-		ba_off += ((mpddr->cr & ATMEL_MPDDRC_CR_NR_MASK) >> 2) + 11;
+		ba_off += ((mpddr_value->cr & ATMEL_MPDDRC_CR_NR_MASK) >> 2)
+			   + 11;
 
 	ba_off += (mpddr_value->md & ATMEL_MPDDRC_MD_DBW_MASK) ? 1 : 2;
 
-- 
1.8.3.1



More information about the U-Boot mailing list