[U-Boot] [PATCH v2 3/5] iMX6DL:arm2: Add support for i.MX6DL arm2 DDR3 board

[Otavio Salvador]

Hello Ye,

On Thu, Sep 4, 2014 at 11:17 AM, Ye.Li <B37916 at freescale.com> wrote:
> This patch adds the i.MX6DL arm2 board support. The i.MX6DL ARM2
> shared the same board with i.MX6Q ARM2 board since the i.MX6DL is
> pin-pin compatible with i.MX6Q.
>
> The patch also support the DDR 32-BIT mode option. Please define
> CONFIG_DDR_32BIT in the board configure file to enable DDR 32-BIT
> mode.But due to the board design, it's 64bit DDR buswidth physically,
> so, if you CONFIG_DDR_32BIT, the DDR memory size will be half of it.
>
> Signed-off-by: Ye.Li <B37916 at freescale.com>

Your patch short log could be improved for:

imx: mx6dlarm2: Add support for i.MX6DL arm2 DDR3 board

This could be reworked on the other patches as well.

My 2c.

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750