[U-Boot] [PATCH v3 3/3] mx6sxsabresd: Add PCI support

Stefano Babic sbabic at denx.de
Tue Sep 9 17:26:55 CEST 2014


On 25/08/2014 19:26, Fabio Estevam wrote:
> Tested with an Intel Wireless PCI 7260HMW card:
> 
> U-Boot 2014.10-rc1-16576-g4a8a8a8-dirty (Aug 23 2014 - 16:05:11)                
>                                                                                 
> CPU:   Freescale i.MX6SX rev1.0 at 792 MHz                                      
> Reset cause: WDOG                                                               
> Board: MX6SX SABRE SDB                                                          
> I2C:   ready                                                                    
> DRAM:  1 GiB                                                                    
> MMC:   FSL_SDHC: 0                                                              
>   00:01.0     - 16c3:abcd - Bridge device                                       
>    01:00.0    - 8086:08b1 - Network controller                                  
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---

I have no problem with the commit message.

Applied to u-boot-imx, thanks!

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list