[U-Boot] [U-Boot,v2,4/4] ARM: atmel: at91sam9n12ek: enable spl support

[Andreas Bießmann]

Dear Bo Shen,

Bo Shen <voice.shen at atmel.com> writes:
>Enable SPL support for at91sam9n12ek boards, now it supports
>boot up from NAND flash, serial flash.
>
>Signed-off-by: Bo Shen <voice.shen at atmel.com>
>---
>
>Changes in v2:
>  - Remove the meaningless prefix "+S:" in configuration file.
>
> arch/arm/mach-at91/Kconfig                 |  1 +
> arch/arm/mach-at91/Makefile                |  1 +
> arch/arm/mach-at91/include/mach/at91_pmc.h |  4 +-
> arch/arm/mach-at91/mpddrc.c                |  2 +-
> arch/arm/mach-at91/spl_at91.c              |  2 +-
> board/atmel/at91sam9n12ek/at91sam9n12ek.c  | 73 ++++++++++++++++++++++++++++++
> configs/at91sam9n12ek_nandflash_defconfig  |  1 +
> configs/at91sam9n12ek_spiflash_defconfig   |  1 +
> include/configs/at91sam9n12ek.h            | 58 +++++++++++++++++++++++-
> 9 files changed, 138 insertions(+), 5 deletions(-)

applied to u-boot-atmel/master, thanks!

Best regards,
Andreas Bießmann