[U-Boot] [PATCH] arm: socfpga: Actually enable L2 cache

Marek Vasut marex at denx.de
Mon Dec 21 15:19:09 CET 2015


On Monday, December 21, 2015 at 01:25:03 PM, Chin Liang See wrote:
> On Mon, 2015-12-21 at 11:09 +0100, Marek Vasut wrote:
> > On Monday, December 21, 2015 at 10:50:50 AM, Chin Liang See wrote:
> [..]
> 
> > > Hmmm, here is the function for L2 cache within my development
> > > branch.
> > > Some of the latency tuning helps based on the benchmark result.
> > > Probably you can give it a try, Marek?
> > > 
> > > void v7_outer_cache_enable(void)
> > > {
> > > 
> > > 	/* disable the L2 cache */
> > > 	writel(0, &pl310_regs_base->pl310_ctrl);
> > > 	
> > > 	/* enable BRESP, instruction and data prefetch, full line of
> > > 
> > > zeroes */
> > > 
> > > 	setbits_le32(&pl310_regs_base->pl310_aux_ctrl,
> > > 	
> > > 			PL310_AUX_CTRL_FULL_LINE_ZERO_MASK |
> > > 			PL310_AUX_CTRL_DATA_PREFETCH_MASK |
> > > 			PL310_AUX_CTRL_INST_PREFETCH_MASK |
> > > 			PL310_AUX_CTRL_EARLY_BRESP_MASK);
> > > 	
> > > 	/* setup tag ram latency */
> > > 	writel(0, &pl310_regs_base->pl310_tag_latency_ctrl);
> > 
> > Are you _sure_ this is a good idea to set the latency to 0x0 ?
> 
> Actually it still have 1 cycle of latency, just no additional

And that's OK on socfpga ? I would've expected some latency here.

Best regards,
Marek Vasut


More information about the U-Boot mailing list