[U-Boot] [PATCH v4 6/8] mips: ath79: add AP121 reference board
Daniel Schwierzeck
daniel.schwierzeck at gmail.com
Sat Dec 26 14:52:22 CET 2015
Am 25.12.2015 um 19:56 schrieb Wills Wang:
> Signed-off-by: Wills Wang <wills.wang at live.com>
> ---
>
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
>
> arch/mips/Kconfig | 8 +++++
> arch/mips/dts/Makefile | 2 +-
> arch/mips/dts/ap121.dts | 37 +++++++++++++++++++
> arch/mips/dts/ar933x.dtsi | 64 +++++++++++++++++++++++++++++++++
> board/ath79/ap121/Kconfig | 15 ++++++++
> board/ath79/ap121/MAINTAINERS | 6 ++++
> board/ath79/ap121/Makefile | 8 +++++
> board/ath79/ap121/README | 18 ++++++++++
> board/ath79/ap121/ap121.c | 17 +++++++++
> board/ath79/ap121/config.mk | 16 +++++++++
> configs/ap121_defconfig | 42 ++++++++++++++++++++++
> include/configs/ap121.h | 82 +++++++++++++++++++++++++++++++++++++++++++
> 12 files changed, 314 insertions(+), 1 deletion(-)
> create mode 100644 arch/mips/dts/ap121.dts
> create mode 100644 arch/mips/dts/ar933x.dtsi
> create mode 100644 board/ath79/ap121/Kconfig
> create mode 100644 board/ath79/ap121/MAINTAINERS
> create mode 100644 board/ath79/ap121/Makefile
> create mode 100644 board/ath79/ap121/README
> create mode 100644 board/ath79/ap121/ap121.c
> create mode 100644 board/ath79/ap121/config.mk
> create mode 100644 configs/ap121_defconfig
> create mode 100644 include/configs/ap121.h
>
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index 7f7e258..09b8709 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -51,6 +51,13 @@ config TARGET_PB1X00
> select SUPPORTS_CPU_MIPS32_R2
> select SYS_MIPS_CACHE_INIT_RAM_LOAD
>
> +config TARGET_AP121
> + bool "Support ap121"
> + select SUPPORTS_BIG_ENDIAN
> + select SUPPORTS_CPU_MIPS32_R1
> + select SUPPORTS_CPU_MIPS32_R2
> + select SYS_MIPS_CACHE_INIT_RAM_LOAD
> +
please create a dedicated Kconfig in arch/mips/mach-ath79/ and add this
board there. Have a look at following links for examples:
https://github.com/danielschwierzeck/u-boot-lantiq/blob/lantiq/upstream/arch/mips/mach-lantiq/Kconfig
http://patchwork.ozlabs.org/patch/558465/
http://patchwork.ozlabs.org/patch/558469/
>
> endchoice
>
> @@ -59,6 +66,7 @@ source "board/imgtec/malta/Kconfig"
> source "board/micronas/vct/Kconfig"
> source "board/pb1x00/Kconfig"
> source "board/qemu-mips/Kconfig"
> +source "board/ath79/ap121/Kconfig"
>
> if MIPS
>
> diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile
> index 47b6eb5..6f8b413 100644
> --- a/arch/mips/dts/Makefile
> +++ b/arch/mips/dts/Makefile
> @@ -2,7 +2,7 @@
> # SPDX-License-Identifier: GPL-2.0+
> #
>
> -dtb-y +=
> +dtb-$(CONFIG_TARGET_AP121) += ap121.dtb
>
> targets += $(dtb-y)
>
> diff --git a/arch/mips/dts/ap121.dts b/arch/mips/dts/ap121.dts
> new file mode 100644
> index 0000000..769458a
> --- /dev/null
> +++ b/arch/mips/dts/ap121.dts
> @@ -0,0 +1,37 @@
> +/dts-v1/;
> +#include "ar933x.dtsi"
> +
> +/ {
> + model = "AP121 Reference Board";
> + compatible = "ath79,ap121", "ath79,ar933x";
> +
> + aliases {
> + spi0 = &spi0;
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&xtal {
> + clock-frequency = <25000000>;
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&spi0 {
> + spi-max-frequency = <25000000>;
> + status = "okay";
> + spi-flash at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "spi-flash";
> + memory-map = <0x9f000000 0x00800000>;
> + spi-max-frequency = <25000000>;
> + reg = <0>;
> + };
> +};
> diff --git a/arch/mips/dts/ar933x.dtsi b/arch/mips/dts/ar933x.dtsi
> new file mode 100644
> index 0000000..64b30f7
> --- /dev/null
> +++ b/arch/mips/dts/ar933x.dtsi
> @@ -0,0 +1,64 @@
> +#include "skeleton.dtsi"
> +
> +/ {
> + compatible = "ath79,ar933x";
the first part should be a vendor name and according to device-trees
from kernel this should be "qca"
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu at 0 {
> + device_type = "cpu";
> + compatible = "mips,mips24Kc";
> + reg = <0>;
> + };
> + };
> +
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + xtal: xtal {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-output-names = "xtal";
> + };
> + };
> +
> + ahb {
> + compatible = "simple-bus";
> + ranges;
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + apb {
> + compatible = "simple-bus";
> + ranges;
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + uart0: uart at 18020000 {
> + compatible = "ath79,ar933x-uart";
I suggest to use "qca,ar9330-uart" like the kernel driver
> + reg = <0x18020000 0x20>;
> +
> + status = "disabled";
> + };
> + };
> +
> + spi0: spi at 1f000000 {
> + compatible = "ath79,ath79-spi";
I suggest to use "qca,ar7100-spi" like the kernel driver
> + reg = <0x1f000000 0x10>;
> +
> + status = "disabled";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +};
> diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig
> new file mode 100644
> index 0000000..88d9eff
> --- /dev/null
> +++ b/board/ath79/ap121/Kconfig
> @@ -0,0 +1,15 @@
> +if TARGET_AP121
> +
> +config SYS_BOARD
> + default "ap121"
> +
> +config SYS_VENDOR
> + default "ath79"
> +
> +config SYS_SOC
> + default "ath79"
> +
> +config SYS_CONFIG_NAME
> + default "ap121"
> +
> +endif
> diff --git a/board/ath79/ap121/MAINTAINERS b/board/ath79/ap121/MAINTAINERS
> new file mode 100644
> index 0000000..319b521
> --- /dev/null
> +++ b/board/ath79/ap121/MAINTAINERS
> @@ -0,0 +1,6 @@
> +AP121 BOARD
> +M: Wills Wang <wills.wang at live.com>
> +S: Maintained
> +F: board/ath79/ap121/
> +F: include/configs/ap121.h
> +F: configs/ap121_defconfig
> diff --git a/board/ath79/ap121/Makefile b/board/ath79/ap121/Makefile
> new file mode 100644
> index 0000000..9132118
> --- /dev/null
> +++ b/board/ath79/ap121/Makefile
> @@ -0,0 +1,8 @@
> +#
> +# (C) Copyright 2003-2006
> +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
again, no historic copyright needed for a simple one-line Makefile
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +
> +obj-y = ap121.o
> diff --git a/board/ath79/ap121/README b/board/ath79/ap121/README
> new file mode 100644
> index 0000000..104850f
> --- /dev/null
> +++ b/board/ath79/ap121/README
> @@ -0,0 +1,18 @@
> +ATHEROS AP121
> +==================
> +
> +Supported hardware: AP121 referance board.
> +
> +Files of the AP121 port
> +--------------------------
> +
> +arch/mips/mach-ath79/ar933x/ - The CPU support code for the Atheros ar933x
> +arch/mips/include/asm/arch-ath79 - Header files for the Atheros ath79
> +board/ath79/ap121/ - AP121 board specific files
> +include/configs/ap121.h - AP121 configuration file
> +
> +Configure
> +-------------------
> +
> +To configure for the current board
> + make ap121_defconfig
you can drop this README. There is no new or relevant information in it
> diff --git a/board/ath79/ap121/ap121.c b/board/ath79/ap121/ap121.c
> new file mode 100644
> index 0000000..f60f88b
> --- /dev/null
> +++ b/board/ath79/ap121/ap121.c
> @@ -0,0 +1,17 @@
> +/*
> + * (C) Copyright 2015
> + * Wills Wang, <wills.wang at live.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <command.h>
> +#include <asm/mipsregs.h>
> +#include <asm/addrspace.h>
> +#include <asm/io.h>
> +
> +int checkboard(void)
> +{
> + return 0;
> +}
you could/should print your board name here
> diff --git a/board/ath79/ap121/config.mk b/board/ath79/ap121/config.mk
> new file mode 100644
> index 0000000..f7dd3b7
> --- /dev/null
> +++ b/board/ath79/ap121/config.mk
> @@ -0,0 +1,16 @@
> +#
> +# (C) Copyright 2003
> +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +
> +#
> +# AP121 referance board, MIPS32 core
> +#
> +
> +# ROM version
> +CONFIG_SYS_TEXT_BASE = 0x9f000000
> +
> +# RAM version
> +#CONFIG_SYS_TEXT_BASE = 0x80010000
config.mk files in board directory are also deprecated. Please add
"#define CONFIG_SYS_TEXT_BASE 0x9f000000" to include/configs/ap121.h
> diff --git a/configs/ap121_defconfig b/configs/ap121_defconfig
> new file mode 100644
> index 0000000..cec0bb7
> --- /dev/null
> +++ b/configs/ap121_defconfig
> @@ -0,0 +1,42 @@
> +CONFIG_MIPS=y
> +CONFIG_TARGET_AP121=y
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_SYS_PROMPT="ap121 # "
> +CONFIG_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="ap121"
> +CONFIG_DM=y
options like CONFIG_OF_CONTROL and CONFIG_DM should be pre-selected by
the mach or SoC specific Kconfig file if you always require it. An user
of your board should not be able to disable those options.
> +CONFIG_DM_SERIAL=y
> +CONFIG_DM_SPI=y
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_ATH79_SPI=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SPI_FLASH_BAR=y
> +CONFIG_SPI_FLASH_ATMEL=y
> +CONFIG_SPI_FLASH_EON=y
> +CONFIG_SPI_FLASH_GIGADEVICE=y
> +CONFIG_SPI_FLASH_MACRONIX=y
> +CONFIG_SPI_FLASH_SPANSION=y
> +CONFIG_SPI_FLASH_STMICRO=y
> +CONFIG_SPI_FLASH_SST=y
> +CONFIG_SPI_FLASH_WINBOND=y
> +CONFIG_SPI_FLASH_USE_4K_SECTORS=y
> +CONFIG_SPI_FLASH_DATAFLASH=y
> +CONFIG_SPI_FLASH_MTD=y
> +CONFIG_CMD_DM=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_SPI=y
> +# CONFIG_NET is not set
> +# CONFIG_CMD_BDI is not set
> +# CONFIG_CMD_CONSOLE is not set
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_XIMG is not set
> +# CONFIG_CMD_ELF is not set
> +# CONFIG_CMD_EXPORTENV is not set
> +# CONFIG_CMD_IMPORTENV is not set
> +# CONFIG_CMD_EDITENV is not set
> +# CONFIG_CMD_CRC32 is not set
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_FPGA is not set
> +# CONFIG_CMD_NFS is not set
> +# CONFIG_CMD_NET is not set
> +CONFIG_USE_PRIVATE_LIBGCC=y
> diff --git a/include/configs/ap121.h b/include/configs/ap121.h
> new file mode 100644
> index 0000000..5a01d11
> --- /dev/null
> +++ b/include/configs/ap121.h
> @@ -0,0 +1,82 @@
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#include <linux/kconfig.h>
> +#include <linux/sizes.h>
those includes are not needed in a board config header file respectively
they are already included implicitely
> +
> +#define CONFIG_ARCH_ATH79
> +#define CONFIG_SOC_AR933X
this is already configured by Kconfig
> +
> +#define CONFIG_DISPLAY_CPUINFO
> +#define CONFIG_DISPLAY_BOARDINFO
> +
> +#define CONFIG_OF_LIBFDT
> +
> +#define CONFIG_SYS_HZ 1000
> +#define CONFIG_SYS_MHZ 200
> +#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
> +
> +/* Cache Configuration */
> +#define CONFIG_SYS_DCACHE_SIZE 32 * SZ_1K
> +#define CONFIG_SYS_ICACHE_SIZE 64 * SZ_1K
> +#define CONFIG_SYS_CACHELINE_SIZE 32
you can drop this, the cache sizes will be detected automatically
> +
> +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
> +
> +#define CONFIG_SYS_MALLOC_LEN ROUND(0x30000 + 128 * SZ_1K, 0x1000)
no need for a magic calculation, please choose a fixed value
> +
> +#define CONFIG_SYS_BOOTPARAMS_LEN 128 * SZ_1K
> +
> +#define CONFIG_SYS_SDRAM_BASE 0x80000000
> +#define CONFIG_SYS_LOAD_ADDR 0x81000000
> +
> +#define CONFIG_SYS_INIT_SP_OFFSET 0x20000
> +#define CONFIG_SYS_NO_FLASH
> +
> +#define CONFIG_AR933X_SERIAL
this is already configured by Kconfig
> +#define CONFIG_BAUDRATE 115200
> +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
> +
> +#define CONFIG_BOOTDELAY 3
> +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
> + "root=/dev/mtdblock2 " \
> + "rootfstype=squashfs"
> +#define CONFIG_BOOTCOMMAND "sf probe;" \
> + "mtdparts default;" \
> + "bootm 0x9f300000"
> +#define CONFIG_LZMA
> +
> +#define MTDIDS_DEFAULT "nor0=spi-flash.0"
> +#define MTDPARTS_DEFAULT "mtdparts=spi-flash.0:256k(u-boot)," \
> + "64k(u-boot-env),2752k(rootfs),896k(uImage),64k(NVRAM),64k(ART)"
> +
> +#define CONFIG_ENV_SPI_MAX_HZ 25000000
> +#define CONFIG_ENV_IS_IN_SPI_FLASH
> +#define CONFIG_ENV_OFFSET (256 * SZ_1K)
> +#define CONFIG_ENV_SECT_SIZE (64 * SZ_1K)
> +#define CONFIG_ENV_SIZE (64 * SZ_1K)
> +
> +/*
> + * Command
> + */
> +#define CONFIG_CMD_MTDPARTS
> +
> +/* Miscellaneous configurable options */
> +#define CONFIG_SYS_CBSIZE 256
> +#define CONFIG_SYS_MAXARGS 16
> +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
> + sizeof(CONFIG_SYS_PROMPT) + 16)
> +#define CONFIG_SYS_LONGHELP
> +#define CONFIG_CMDLINE_EDITING
> +#define CONFIG_AUTO_COMPLETE
> +#define CONFIG_SYS_HUSH_PARSER
> +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
this is already configured by Kconfig
> +
> +/*
> + * Diagnostics
> + */
> +#define CONFIG_SYS_MEMTEST_START 0x80100000
> +#define CONFIG_SYS_MEMTEST_END 0x83f00000
> +#define CONFIG_CMD_MEMTEST
> +
> +#endif /* __CONFIG_H */
>
--
- Daniel
More information about the U-Boot
mailing list