[U-Boot] [PATCH] keystone2: add high memory test

[Vitaly Andrianov]

On 07/21/2015 05:28 PM, Tom Rini wrote:
> On Wed, Jul 08, 2015 at 11:51:39AM -0400, Vitaly Andrianov wrote:
>
>> Keystone2 SOC physical DDR3 address range is outside the first 4GB and
>> cannot be entirely accessible without MMU enabled. Only first 2GB of
>> the physical memory have 32-bits aliased addresses. This patch adds u-boot
>> shell command that allows to enable/disable MMU and map the 1GB of
>> 36bits physical memory to the first 4GB address range.
>>
>> Signed-off-by: Vitaly Andrianov <vitalya at ti.com>
>> ---
>>   arch/arm/mach-keystone/Makefile  |   3 +-
>>   arch/arm/mach-keystone/highmem.c | 162 +++++++++++++++++++++++++++++++++++++++
>>   2 files changed, 164 insertions(+), 1 deletion(-)
>>   create mode 100644 arch/arm/mach-keystone/highmem.c
>
> The code looks reasonable.  But why do we need this?  Thanks.
>
Tom,

I added this code to test DDR3 configuration. Probably you are right. 
After configuration is done we don't need this code.

Thanks,
-Vitaly