[U-Boot] [PATCH] net: lpc32xx: correct command register reset value

[Vladimir Zapolskiy]

According to LPC32x0 User Manual the following bits in Command
register 0x3106_0100 are defined:

  Bit    Symbol
    2  - Unused
    3  RegReset
    4   TxReset
    5   RxReset

Fix wrong (1-bit shifted right) COMMAND_RESETS value, which sets
an unused bit, but neglects RxReset.

Signed-off-by: Vladimir Zapolskiy <vz at mleia.com>
---
 drivers/net/lpc32xx_eth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/lpc32xx_eth.c b/drivers/net/lpc32xx_eth.c
index 8dcbb4a..72451a9 100644
--- a/drivers/net/lpc32xx_eth.c
+++ b/drivers/net/lpc32xx_eth.c
@@ -170,7 +170,7 @@ struct lpc32xx_eth_registers {
 #define COMMAND_PASSRUNTFRAME 0x00000040
 #define COMMAND_FULL_DUPLEX   0x00000400
 /* Helper: general reset */
-#define COMMAND_RESETS        0x0000001C
+#define COMMAND_RESETS        0x00000038
 
 /* STATUS register bitfields/masks and offsets (see Table 283) */
 #define STATUS_RXSTATUS 0x00000001
-- 
2.1.4