[U-Boot] [PATCH 13/16] usb: ohci: Remove unnecessary delays from hc_start and power power-on paths

[Hans de Goede]

The common usb_hub code already waits a full second after powering up ports,
so there is no need for additional delays inside the hcd code.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/usb/host/ohci-hcd.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index da500c0..dc0892f 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1338,7 +1338,6 @@ pkt_print(ohci, NULL, dev, pipe, buffer, transfer_len,
 			OK(0);
 		case (RH_PORT_POWER):
 			WR_RH_PORTSTAT(RH_PS_PPS);
-			mdelay(100);
 			OK(0);
 		case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
 			if (RD_RH_PORTSTAT & RH_PS_CCS)
@@ -1737,9 +1736,6 @@ static int hc_start(ohci_t *ohci)
 	ohci_writel(RH_HS_LPSC, &ohci->regs->roothub.status);
 #endif	/* OHCI_USE_NPS */
 
-	/* POTPGT delay is bits 24-31, in 2 ms units. */
-	mdelay((roothub_a(ohci) >> 23) & 0x1fe);
-
 	/* connect the virtual root hub */
 	ohci->rh.devnum = 0;
 
-- 
2.3.6