[U-Boot] [PATCH v3 09/12] input: Convert i8042 to driver model

Bin Meng bmeng.cn at gmail.com
Thu Nov 12 14:50:55 CET 2015


On Thu, Nov 12, 2015 at 1:05 AM, Simon Glass <sjg at chromium.org> wrote:
> Adjust this driver to support driver model. The only users are x86 boards
> so this should be safe.
>
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
>

Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
Tested-by: Bin Meng <bmeng.cn at gmail.com>

> Changes in v3: None
> Changes in v2: None
>
>  drivers/input/Makefile |   2 +-
>  drivers/input/i8042.c  | 109 ++++++++++++++++++++++++++++++++++---------------
>  include/i8042.h        |   6 ---
>  3 files changed, 76 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/input/Makefile b/drivers/input/Makefile
> index 9388dfe..5f15265 100644
> --- a/drivers/input/Makefile
> +++ b/drivers/input/Makefile
> @@ -7,7 +7,7 @@
>
>  obj-$(CONFIG_DM_KEYBOARD) += keyboard-uclass.o
>
> -obj-$(CONFIG_I8042_KBD) += i8042.o
> +obj-$(CONFIG_I8042_KEYB) += i8042.o
>  obj-$(CONFIG_TEGRA_KEYBOARD) += tegra-kbc.o
>  obj-$(CONFIG_TWL4030_INPUT) += twl4030.o
>  obj-$(CONFIG_CROS_EC_KEYB) += cros_ec_keyb.o
> diff --git a/drivers/input/i8042.c b/drivers/input/i8042.c
> index 270805b..e5e2926 100644
> --- a/drivers/input/i8042.c
> +++ b/drivers/input/i8042.c
> @@ -8,8 +8,11 @@
>  /* i8042.c - Intel 8042 keyboard driver routines */
>
>  #include <common.h>
> +#include <dm.h>
> +#include <errno.h>
>  #include <i8042.h>
>  #include <input.h>
> +#include <keyboard.h>
>  #include <asm/io.h>
>
>  /* defines */
> @@ -17,8 +20,9 @@
>  #define out8(p, v)     outb(v, p)
>
>  /* locals */
> -static struct input_config config;
> -static bool extended;
> +struct i8042_kbd_priv {
> +       bool extended;  /* true if an extended keycode is expected next */
> +};
>
>  static unsigned char ext_key_map[] = {
>         0x1c, /* keypad enter */
> @@ -60,12 +64,20 @@ static int kbd_output_full(void)
>         return kbd_timeout != -1;
>  }
>
> -static void kbd_led_set(int flags)
> +/**
> + * check_leds() - Check the keyboard LEDs and update them it needed
> + *
> + * @ret:       Value to return
> + * @return value of @ret
> + */
> +static int i8042_kbd_update_leds(struct udevice *dev, int leds)
>  {
>         kbd_input_empty();
>         out8(I8042_DATA_REG, CMD_SET_KBD_LED);
>         kbd_input_empty();
> -       out8(I8042_DATA_REG, flags & 0x7);
> +       out8(I8042_DATA_REG, leds & 0x7);
> +
> +       return 0;
>  }
>
>  static int kbd_write(int reg, int value)
> @@ -144,6 +156,8 @@ static int kbd_controller_present(void)
>  /*
>   * Implement a weak default function for boards that optionally
>   * need to skip the i8042 initialization.
> + *
> + * TODO(sjg at chromium.org): Use device tree for this?
>   */
>  int __weak board_i8042_skip(void)
>  {
> @@ -190,6 +204,8 @@ int i8042_disable(void)
>
>  static int i8042_kbd_check(struct input_config *input)
>  {
> +       struct i8042_kbd_priv *priv = dev_get_priv(input->dev);
> +
>         if ((in8(I8042_STS_REG) & STATUS_OBF) == 0) {
>                 return 0;
>         } else {
> @@ -201,15 +217,15 @@ static int i8042_kbd_check(struct input_config *input)
>                 if (scan_code == 0xfa) {
>                         return 0;
>                 } else if (scan_code == 0xe0) {
> -                       extended = true;
> +                       priv->extended = true;
>                         return 0;
>                 }
>                 if (scan_code & 0x80) {
>                         scan_code &= 0x7f;
>                         release = true;
>                 }
> -               if (extended) {
> -                       extended = false;
> +               if (priv->extended) {
> +                       priv->extended = false;
>                         for (i = 0; ext_key_map[i]; i++) {
>                                 if (ext_key_map[i] == scan_code) {
>                                         scan_code = 0x60 + i;
> @@ -221,21 +237,23 @@ static int i8042_kbd_check(struct input_config *input)
>                                 return 0;
>                 }
>
> -               input_add_keycode(&config, scan_code, release);
> +               input_add_keycode(input, scan_code, release);
>                 return 1;
>         }
>  }
>
>  /* i8042_kbd_init - reset keyboard and init state flags */
> -int i8042_kbd_init(void)
> +static int i8042_start(struct udevice *dev)
>  {
> +       struct keyboard_priv *uc_priv = dev_get_uclass_priv(dev);
> +       struct input_config *input = &uc_priv->input;
>         int keymap, try;
>         char *penv;
>         int ret;
>
>         if (!kbd_controller_present() || board_i8042_skip()) {
>                 debug("i8042 keyboard controller is not present\n");
> -               return -1;
> +               return -ENOENT;
>         }
>
>         /* Init keyboard device (default US layout) */
> @@ -251,42 +269,65 @@ int i8042_kbd_init(void)
>                         return -1;
>         }
>
> -       ret = input_init(&config, keymap == KBD_GER);
> +       ret = input_add_tables(input, keymap == KBD_GER);
>         if (ret)
>                 return ret;
> -       config.read_keys = i8042_kbd_check;
> -       input_allow_repeats(&config, true);
>
> -       kbd_led_set(NORMAL);
> +       i8042_kbd_update_leds(dev, NORMAL);
> +       debug("%s: started\n", __func__);
>
>         return 0;
>  }
>
>  /**
> - * check_leds() - Check the keyboard LEDs and update them it needed
> + * Set up the i8042 keyboard. This is called by the stdio device handler
>   *
> - * @ret:       Value to return
> - * @return value of @ret
> + * We want to do this init when the keyboard is actually used rather than
> + * at start-up, since keyboard input may not currently be selected.
> + *
> + * Once the keyboard starts there will be a period during which we must
> + * wait for the keyboard to init. We do this only when a key is first
> + * read - see kbd_wait_for_fifo_init().
> + *
> + * @return 0 if ok, -ve on error
>   */
> -static int check_leds(int ret)
> +static int i8042_kbd_probe(struct udevice *dev)
>  {
> -       int leds;
> -
> -       leds = input_leds_changed(&config);
> -       if (leds >= 0)
> -               kbd_led_set(leds);
> +       struct keyboard_priv *uc_priv = dev_get_uclass_priv(dev);
> +       struct stdio_dev *sdev = &uc_priv->sdev;
> +       struct input_config *input = &uc_priv->input;
> +       int ret;
>
> -       return ret;
> -}
> +       /* Register the device. i8042_start() will be called soon */
> +       input->dev = dev;
> +       input->read_keys = i8042_kbd_check;
> +       input_allow_repeats(input, true);
> +       strcpy(sdev->name, "i8042-kbd");
> +       ret = input_stdio_register(sdev);
> +       if (ret) {
> +               debug("%s: input_stdio_register() failed\n", __func__);
> +               return ret;
> +       }
> +       debug("%s: ready\n", __func__);
>
> -/* i8042_tstc - test if keyboard input is available */
> -int i8042_tstc(struct stdio_dev *dev)
> -{
> -       return check_leds(input_tstc(&config));
> +       return 0;
>  }
>
> -/* i8042_getc - wait till keyboard input is available */
> -int i8042_getc(struct stdio_dev *dev)
> -{
> -       return check_leds(input_getc(&config));
> -}
> +static const struct keyboard_ops i8042_kbd_ops = {
> +       .start  = i8042_start,
> +       .update_leds    = i8042_kbd_update_leds,
> +};
> +
> +static const struct udevice_id i8042_kbd_ids[] = {
> +       { .compatible = "intel,i8042-keyboard" },
> +       { }
> +};
> +
> +U_BOOT_DRIVER(i8042_kbd) = {
> +       .name   = "i8042_kbd",
> +       .id     = UCLASS_KEYBOARD,
> +       .of_match = i8042_kbd_ids,
> +       .probe = i8042_kbd_probe,
> +       .ops    = &i8042_kbd_ops,
> +       .priv_auto_alloc_size = sizeof(struct i8042_kbd_priv),
> +};
> diff --git a/include/i8042.h b/include/i8042.h
> index e0afce1..9723b6a 100644
> --- a/include/i8042.h
> +++ b/include/i8042.h
> @@ -87,10 +87,4 @@ void i8042_flush(void);
>   */
>  int i8042_disable(void);
>
> -struct stdio_dev;
> -
> -int i8042_kbd_init(void);
> -int i8042_tstc(struct stdio_dev *dev);
> -int i8042_getc(struct stdio_dev *dev);
> -
>  #endif /* _I8042_H_ */
> --
> 2.6.0.rc2.230.g3dd15c0
>


More information about the U-Boot mailing list