[U-Boot] [Patch V4 4/7] armv8/ls1043aqds: add LS1043AQDS board support

[York Sun]

On 11/11/2015 01:58 AM, Gong Qianyu wrote:
> From: Shaohui Xie <Shaohui.Xie at freescale.com>
> 
> LS1043AQDS Specification:
> -------------------------
> Memory subsystem:
>  * 2GByte DDR4 DIMM
>  * 128 Mbyte NOR flash single-chip memory
>  * 512 Mbyte NAND flash
>  * 16 Mbyte high-speed SPI flash
>  * SD connector to interface with the SD memory card
> 
> Ethernet:
>  * Two RGMII ports
>  * XFI 10G port
>  * SGMII
>  * QSGMII with 4x 1G ports
> 
> PCIe: supports Gen 1 and Gen 2
> 
> SATA 3.0: one SATA 3.0 port
> 
> USB 3.0: two micro AB connector and one type A connector
> 
> UART: supports two UARTs up to 115200 bps for console
> 
> Signed-off-by: Shaohui Xie <Shaohui.Xie at freescale.com>
> Signed-off-by: Mingkai Hu <Mingkai.Hu at freescale.com>
> Signed-off-by: Hou Zhiqiang <B48286 at freescale.com>
> Signed-off-by: Gong Qianyu <Qianyu.Gong at freescale.com>
> ---
> V4:
>  - Fix vid macros in config file and add vid support.
>  - Remove RAW_TIMING definition for DDR3.
>  - Remove LS1043AQDS_MDIO_10GC related code because LS1043AQDS has no phy for it.
> V3:
>  - Update the commit message.
>  - Remove #ifdef in fdt.h.
>  - Rename ls1043aqds_sdcard_defconfig to ls1043aqds_sdcard_ifc_defconfig.
> V2:
>  - No change.
> 
>  arch/arm/Kconfig                                   |   9 +
>  arch/arm/include/asm/arch-fsl-layerscape/fdt.h     |   1 +
>  board/freescale/common/vid.c                       |  22 +
>  board/freescale/ls1043aqds/Kconfig                 |  15 +
>  board/freescale/ls1043aqds/MAINTAINERS             |   9 +
>  board/freescale/ls1043aqds/Makefile                |   9 +
>  board/freescale/ls1043aqds/README                  |  96 ++++
>  board/freescale/ls1043aqds/ddr.c                   | 131 ++++++
>  board/freescale/ls1043aqds/ddr.h                   |  60 +++
>  board/freescale/ls1043aqds/eth.c                   | 492 +++++++++++++++++++++
>  board/freescale/ls1043aqds/ls1043aqds.c            | 333 ++++++++++++++
>  board/freescale/ls1043aqds/ls1043aqds_pbi.cfg      |  14 +
>  board/freescale/ls1043aqds/ls1043aqds_qixis.h      |  39 ++
>  board/freescale/ls1043aqds/ls1043aqds_rcw_nand.cfg |   7 +
>  .../freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg |   8 +
>  configs/ls1043aqds_defconfig                       |   3 +
>  configs/ls1043aqds_nand_defconfig                  |   4 +
>  configs/ls1043aqds_nor_ddr3_defconfig              |   2 +
>  configs/ls1043aqds_sdcard_ifc_defconfig            |   4 +
>  include/configs/ls1043aqds.h                       | 387 ++++++++++++++++
>  20 files changed, 1645 insertions(+)

Added CONFIG_SYS_NS16550=y in defconfig files.
Applied to fsl-qoriq master. Thanks.

York