[U-Boot] [PATCH V2 11/11] exynos5-dt-types: add board detection for Odroid XU3/XU3L/XU4.
Simon Glass
sjg at chromium.org
Mon Oct 19 04:21:25 CEST 2015
Hi Premyslaw,
On 13 October 2015 at 05:59, Przemyslaw Marczak <p.marczak at samsung.com> wrote:
> Hello Simon,
>
>
> On 10/03/2015 04:28 PM, Simon Glass wrote:
>>
>> Hi Przemyslaw,
>>
>> On 21 September 2015 at 13:26, Przemyslaw Marczak <p.marczak at samsung.com>
>> wrote:
>>>
>>> This commit adds additional file with implementation of board
>>> detection code for Odroid-XU3/XU4.
>>>
>>> The detection depends on compatible found in fdt:
>>> - "samsung,exynos5" - uses Exynos5 generic code
>>> - "samsung,odroidxu3" - try detect XU3 revision
>>>
>>> There are few revisions of Odroid XU3/XU4, each can be detected
>>> by checking the value of channel 9 of built-in ADC:
>>> Rev ADC Board
>>> 0.1 0 XU3 0.1
>>> 0.2 372 XU3 0.2 | XU3L - no DISPLAYPORT
>>> 0.3 1280 XU4 0.1
>>>
>>> The detection code depends on the ADC+10% value.
>>>
>>> Implementation of functions:
>>> - set_board_type() - read ADC and set type
>>> - get_board_rev() - returns board revision: 1..3
>>> - get_board_type() - returns board type string
>>>
>>> Additional functions with return values of bool:
>>> - board_is_generic() - true if found compatible "samsung,exynos5"
>>> but not "samsung,odroidxu3"
>>> - board_is_odroidxu3() - true if found compatible "samsung,odroidxu3"
>>> and one of XU3 revision.
>>> - board_is_odroidxu4() - true if found compatible "samsung,odroidxu3"
>>> and XU4 revision.
>>>
>>> After I2C controller init, the get_board_type() can check
>>> if the XU3 board is a "Lite" variant, by probing chip
>>> 0x40 on I2C0 (INA231 - exists only on non-lite).
>>> This is useful for setting fdt file name at misc_init_r().
>>>
>>> Enabled configs:
>>> - CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
>>> - CONFIG_ODROID_REV_AIN
>>> - CONFIG_REVISION_TAG
>>> - CONFIG_BOARD_TYPES
>>>
>>> Signed-off-by: Przemyslaw Marczak <p.marczak at samsung.com>
>>> ---
>>> Changes V2:
>>> - move detection code from exynos5-dt.c to exynos5-dt-types.c
>>> - add header with board type function declarations
>>> - check for compatible before do the detection
>>> - update the ADC max values with 20% tolerance
>>> - fix XU4 adc value, related to mistake from table in XU4 schematic
>>> - return "Not supported" for XU4 when calls one of:
>>> --dfu_get_alt_boot()
>>> --dfu_get_alt_system()
>>> - extend ${dfu_alt_system} by strings:
>>> -- 'exynos5422-odroidxu3-lite.dtb'
>>> -- 'exynos5422-odroidxu4.dtb' - allows prepare card on XU3
>>> ---
>>> board/samsung/common/Makefile | 5 +-
>>> board/samsung/common/exynos5-dt-types.c | 196
>>> ++++++++++++++++++++++++++++++++
>>> board/samsung/common/exynos5-dt.c | 12 ++
>>> configs/odroid-xu3_defconfig | 2 +
>>> include/configs/odroid_xu3.h | 12 ++
>>> include/samsung/exynos5-dt-types.h | 27 +++++
>>> 6 files changed, 253 insertions(+), 1 deletion(-)
>>> create mode 100644 board/samsung/common/exynos5-dt-types.c
>>> create mode 100644 include/samsung/exynos5-dt-types.h
>>
>>
>> Reviewed-by: Simon Glass <sjg at chromium.org>
>>
>> See nits below.
>>
>
> Ok.
>
>
>>>
>>> diff --git a/board/samsung/common/Makefile
>>> b/board/samsung/common/Makefile
>>> index 6cbd906..ef1a8f3 100644
>>> --- a/board/samsung/common/Makefile
>>> +++ b/board/samsung/common/Makefile
>>> @@ -11,5 +11,8 @@ obj-$(CONFIG_MISC_COMMON) += misc.o
>>>
>>> ifndef CONFIG_SPL_BUILD
>>> obj-$(CONFIG_BOARD_COMMON) += board.o
>>> -obj-$(CONFIG_EXYNOS5_DT) += exynos5-dt.o
>>> +ifdef CONFIG_EXYNOS5_DT
>>> +obj-y += exynos5-dt.o
>>> +obj-$(CONFIG_BOARD_TYPES) += exynos5-dt-types.o
>>> +endif
>>> endif
>>> diff --git a/board/samsung/common/exynos5-dt-types.c
>>> b/board/samsung/common/exynos5-dt-types.c
>>> new file mode 100644
>>> index 0000000..1364e98
>>> --- /dev/null
>>> +++ b/board/samsung/common/exynos5-dt-types.c
>>> @@ -0,0 +1,196 @@
>>> +/*
>>> + * Copyright (C) 2015 Samsung Electronics
>>> + * Przemyslaw Marczak <p.marczak at samsung.com>
>>> + *
>>> + * SPDX-License-Identifier: GPL-2.0+
>>> + */
>>> +
>>> +#include <adc.h>
>>> +#include <common.h>
>>> +#include <dm.h>
>>> +#include <errno.h>
>>> +#include <fdtdec.h>
>>> +#include <power/pmic.h>
>>> +#include <power/regulator.h>
>>> +#include <power/s2mps11.h>
>>> +#include <samsung/exynos5-dt-types.h>
>>> +#include <samsung/misc.h>
>>> +
>>> +DECLARE_GLOBAL_DATA_PTR;
>>> +
>>> +static const struct udevice_id board_ids[] = {
>>> + { .compatible = "samsung,odroidxu3", .data =
>>> EXYNOS5_BOARD_ODROID_XU3 },
>>> + { .compatible = "samsung,exynos5", .data = EXYNOS5_BOARD_GENERIC
>>> },
>>> + { },
>>> +};
>>> +
>>> +/**
>>> + * Odroix XU3/4 board revisions:
>>> + * Rev ADCmax Board
>>> + * 0.1 0 XU3 0.1
>>> + * 0.2 410 XU3 0.2 | XU3L - no DISPLAYPORT (probe I2C0:0x40 /
>>> INA231)
>>> + * 0.3 1408 XU4 0.1
>>> + * Use +10 % for ADC value tolerance.
>>> + */
>>> +struct odroid_rev_info odroid_info[] = {
>>> + { EXYNOS5_BOARD_ODROID_XU3_REV01, 1, 10, "xu3" },
>>> + { EXYNOS5_BOARD_ODROID_XU3_REV02, 2, 410, "xu3" },
>>> + { EXYNOS5_BOARD_ODROID_XU4_REV01, 1, 1408, "xu4" },
>>> + { EXYNOS5_BOARD_ODROID_UNKNOWN, 0, 4095, "unknown" },
>>> +};
>>> +
>>> +static unsigned int odroid_get_rev(void)
>>> +{
>>> + int i;
>>> +
>>> + for (i = 0; i < ARRAY_SIZE(odroid_info); i++) {
>>> + if (odroid_info[i].board_type == gd->board_type)
>>> + return odroid_info[i].board_rev;
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int odroid_get_board_type(void)
>>> +{
>>> + unsigned int adcval;
>>> + int ret, i;
>>> +
>>> + ret = adc_channel_single_shot("adc", CONFIG_ODROID_REV_AIN,
>>> &adcval);
>>> + if (ret)
>>> + goto rev_default;
>>> +
>>> + for (i = 0; i < ARRAY_SIZE(odroid_info); i++) {
>>> + /* ADC tolerance: +20 % */
>>> + if (adcval < odroid_info[i].adc_val)
>>> + return odroid_info[i].board_type;
>>> + }
>>> +
>>> +rev_default:
>>> + return EXYNOS5_BOARD_ODROID_XU3;
>>> +}
>>> +
>>> +/**
>>> + * odroid_get_type_str - returns pointer to one of the board type
>>> string.
>>> + * Board types: "xu3", "xu3-lite", "xu4". However the "xu3lite" can be
>>> + * detected only when the i2c controller is ready to use. Fortunately,
>>> + * XU3 and XU3L are compatible, and the information about board lite
>>> + * revision is needed before booting the linux, to set proper
>>> environment
>>> + * variable: $fdtfile.
>>> + */
>>> +static const char *odroid_get_type_str(void)
>>> +{
>>> + const char *type_xu3l = "xu3-lite";
>>> + struct udevice *dev, *chip;
>>> + int i, ret;
>>> +
>>> + if (gd->board_type != EXYNOS5_BOARD_ODROID_XU3_REV02)
>>> + goto exit;
>>> +
>>> + ret = pmic_get("s2mps11", &dev);
>>> + if (ret)
>>> + goto exit;
>>> +
>>> + /* Enable LDO26: 3.0V */
>>> + ret = pmic_reg_write(dev, S2MPS11_REG_L26CTRL,
>>> + S2MPS11_LDO26_ENABLE);
>>> + if (ret)
>>> + goto exit;
>>> +
>>> + /* Check XU3Lite by probe INA231 I2C0:0x40 */
>>> + ret = uclass_get_device(UCLASS_I2C, 0, &dev);
>>
>>
>> Yikes! What happens if you want to add a driver for this?
>>
>
> This may look much more pretty, but the INA's driver is not needed at U-Boot
> and also I don't like implement everything at once, since as you can see it
> takes some time to review and fixing again and again.
>
>
>>> + if (ret)
>>> + goto exit;
>>> +
>>> + ret = dm_i2c_probe(dev, 0x40, 0x0, &chip);
>>> + if (ret)
>>> + return type_xu3l;
>>> +
>>> +exit:
>>> + for (i = 0; i < ARRAY_SIZE(odroid_info); i++) {
>>> + if (odroid_info[i].board_type == gd->board_type)
>>> + return odroid_info[i].name;
>>> + }
>>> +
>>> + return NULL;
>>> +}
>>> +
>>> +bool board_is_odroidxu3(void)
>>> +{
>>> + if (gd->board_type >= EXYNOS5_BOARD_ODROID_XU3 &&
>>> + gd->board_type <= EXYNOS5_BOARD_ODROID_XU3_REV02)
>>> + return true;
>>> +
>>> + return false;
>>> +}
>>> +
>>> +bool board_is_odroidxu4(void)
>>> +{
>>> + if (gd->board_type == EXYNOS5_BOARD_ODROID_XU4_REV01)
>>> + return true;
>>> +
>>> + return false;
>>> +}
>>> +
>>> +bool board_is_generic(void)
>>> +{
>>> + if (gd->board_type == EXYNOS5_BOARD_GENERIC)
>>> + return true;
>>> +
>>> + return false;
>>> +}
>>> +
>>> +/**
>>> + * get_board_rev() - return detected board revision.
>>> + *
>>> + * @return: return board revision number for XU3 or 0 for generic
>>> + */
>>> +u32 get_board_rev(void)
>>> +{
>>> + if (board_is_generic())
>>> + return 0;
>>> +
>>> + return odroid_get_rev();
>>> +}
>>> +
>>> +/**
>>> + * get_board_type() - returns board type string.
>>> + *
>>> + * @return: return board type string for XU3 or empty string for
>>> generic
>>> + */
>>> +const char *get_board_type(void)
>>> +{
>>> + const char *generic = "";
>>> +
>>> + if (board_is_generic())
>>> + return generic;
>>> +
>>> + return odroid_get_type_str();
>>> +}
>>> +
>>> +/**
>>> + * set_board_type() - set board type in gd->board_type.
>>> + * As default type set EXYNOS5_BOARD_GENERIC, if detect Odroid,
>>> + * then set it's proper type.
>>
>>
>> its
>>
>
> Right.
>
>>> + */
>>> +void set_board_type(void)
>>> +{
>>> + const struct udevice_id *of_match = board_ids;
>>> + int ret;
>>> +
>>> + gd->board_type = EXYNOS5_BOARD_GENERIC;
>>> +
>>> + while (of_match->compatible) {
>>> + ret = fdt_node_check_compatible(gd->fdt_blob, 0,
>>> + of_match->compatible);
>>> + if (ret)
>>> + of_match++;
>>> +
>>> + gd->board_type = of_match->data;
>>> + break;
>>> + }
>>> +
>>> + /* If Odroid, then check it's revision */
>>
>>
>> its
>>
>
> ok.
>
>
>>> + if (board_is_odroidxu3())
>>> + gd->board_type = odroid_get_board_type();
>>> +}
>>> diff --git a/board/samsung/common/exynos5-dt.c
>>> b/board/samsung/common/exynos5-dt.c
>>> index 4250f72..4d9e151 100644
>>> --- a/board/samsung/common/exynos5-dt.c
>>> +++ b/board/samsung/common/exynos5-dt.c
>>> @@ -27,7 +27,10 @@
>>> #include <power/pmic.h>
>>> #include <power/max77686_pmic.h>
>>> #include <power/regulator.h>
>>> +#include <power/s2mps11.h>
>>> #include <power/s5m8767.h>
>>> +#include <samsung/exynos5-dt-types.h>
>>> +#include <samsung/misc.h>
>>> #include <tmu.h>
>>>
>>> DECLARE_GLOBAL_DATA_PTR;
>>> @@ -335,15 +338,24 @@ int board_usb_init(int index, enum usb_init_type
>>> init)
>>> #ifdef CONFIG_SET_DFU_ALT_INFO
>>> char *get_dfu_alt_system(char *interface, char *devstr)
>>> {
>>> + char *info = "Not supported!";
>>> +
>>> + if (board_is_odroidxu4())
>>> + return info;
>>> +
>>> return getenv("dfu_alt_system");
>>> }
>>>
>>> char *get_dfu_alt_boot(char *interface, char *devstr)
>>> {
>>> + char *info = "Not supported!";
>>> struct mmc *mmc;
>>> char *alt_boot;
>>> int dev_num;
>>>
>>> + if (board_is_odroidxu4())
>>> + return info;
>>> +
>>> dev_num = simple_strtoul(devstr, NULL, 10);
>>>
>>> mmc = find_mmc_device(dev_num);
>>> diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig
>>> index f38c37b..d7e5698 100644
>>> --- a/configs/odroid-xu3_defconfig
>>> +++ b/configs/odroid-xu3_defconfig
>>> @@ -16,3 +16,5 @@ CONFIG_VIDEO_BRIDGE=y
>>> CONFIG_SYS_PROMPT="ODROID-XU3 # "
>>> CONFIG_USB=y
>>> CONFIG_DM_USB=y
>>> +CONFIG_ADC=y
>>> +CONFIG_ADC_EXYNOS=y
>>> diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h
>>> index 3c70158..648e48b 100644
>>> --- a/include/configs/odroid_xu3.h
>>> +++ b/include/configs/odroid_xu3.h
>>> @@ -94,6 +94,8 @@
>>> "boot.scr fat 0 1;" \
>>> "boot.cmd fat 0 1;" \
>>> "exynos5422-odroidxu3.dtb fat 0 1;" \
>>> + "exynos5422-odroidxu3-lite.dtb fat 0 1;" \
>>> + "exynos5422-odroidxu4.dtb fat 0 1;" \
>>> "boot part 0 1;" \
>>> "root part 0 2\0"
>>>
>>> @@ -113,9 +115,19 @@
>>>
>>> /* Enable: board/samsung/common/misc.c to use set_dfu_alt_info() */
>>> #define CONFIG_MISC_COMMON
>>> +#define CONFIG_MISC_INIT_R
>>> #define CONFIG_SET_DFU_ALT_INFO
>>> #define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K)
>>>
>>> +/* Set soc_rev, soc_id, board_rev, boardname, fdtfile */
>>> +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
>>> +#define CONFIG_ODROID_REV_AIN 9
>>> +#define CONFIG_REVISION_TAG
>>> +#define CONFIG_BOARD_TYPES
>>> +
>>> +#undef CONFIG_SYS_BOARD
>>> +#define CONFIG_SYS_BOARD "odroid"
>>> +
>>> /* Define new extra env settings, including DFU settings */
>>> #undef CONFIG_EXTRA_ENV_SETTINGS
>>> #define CONFIG_EXTRA_ENV_SETTINGS \
>>> diff --git a/include/samsung/exynos5-dt-types.h
>>> b/include/samsung/exynos5-dt-types.h
>>> new file mode 100644
>>> index 0000000..479e2e7
>>> --- /dev/null
>>> +++ b/include/samsung/exynos5-dt-types.h
>>> @@ -0,0 +1,27 @@
>>> +#ifndef _EXYNOS5_DT_H_
>>> +#define _EXYNOS5_DT_H_
>>> +
>>> +enum {
>>> + EXYNOS5_BOARD_GENERIC,
>>> +
>>> + EXYNOS5_BOARD_ODROID_XU3,
>>> + EXYNOS5_BOARD_ODROID_XU3_REV01,
>>> + EXYNOS5_BOARD_ODROID_XU3_REV02,
>>> + EXYNOS5_BOARD_ODROID_XU4_REV01,
>>> + EXYNOS5_BOARD_ODROID_UNKNOWN,
>>> +
>>> + EXYNOS5_BOARD_COUNT,
>>> +};
>>> +
>>> +struct odroid_rev_info {
>>> + int board_type;
>>> + int board_rev;
>>> + int adc_val;
>>> + const char *name;
>>> +};
>>> +
>>> +bool board_is_generic(void);
>>> +bool board_is_odroidxu3(void);
>>> +bool board_is_odroidxu4(void);
>>> +
>>> +#endif
>>> --
>>> 1.9.1
>>>
>>
>> I can't help wondering why we don't just have separate device trees
>> for these boards. It seems a pain to try to support them all with this
>> auto-detection. Anyway, I think I already asked this and you're pretty
>> sure this is what you want. I do understand the need to make it
>> painless for users.
>>
>> Regards,
>> Simon
>>
>
> It's much more easy for us, to support several Odroid revisions with the
> same SoC by the single U-Boot binary. It's also easy for the users, if they
> have a single binary for actually the same board variants.
>
> And it's one less thing, that can be broken by the mistake :)
OK I see.
Regards,
Simon
More information about the U-Boot
mailing list