[U-Boot] [PATCH 2/5] mx7dsabreasd: Remove dead code

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at freescale.com>

iox74lv_set() is not used anywhere, so let's remove it.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 board/freescale/mx7dsabresd/mx7dsabresd.c | 38 -------------------------------
 1 file changed, 38 deletions(-)

diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c b/board/freescale/mx7dsabresd/mx7dsabresd.c
index 6bd47df..6c2fc98 100644
--- a/board/freescale/mx7dsabresd/mx7dsabresd.c
+++ b/board/freescale/mx7dsabresd/mx7dsabresd.c
@@ -190,44 +190,6 @@ static void iox74lv_init(void)
 	gpio_direction_output(IOX_STCP, 1);
 };
 
-void iox74lv_set(int index)
-{
-	int i;
-	for (i = 7; i >= 0; i--) {
-		gpio_direction_output(IOX_SHCP, 0);
-
-		if (i == index)
-			gpio_direction_output(IOX_SDI, seq[qn_output[i]][0]);
-		else
-			gpio_direction_output(IOX_SDI, seq[qn_output[i]][1]);
-		udelay(500);
-		gpio_direction_output(IOX_SHCP, 1);
-		udelay(500);
-	}
-
-	gpio_direction_output(IOX_STCP, 0);
-	udelay(500);
-	/*
-	  * shift register will be output to pins
-	  */
-	gpio_direction_output(IOX_STCP, 1);
-
-	for (i = 7; i >= 0; i--) {
-		gpio_direction_output(IOX_SHCP, 0);
-		gpio_direction_output(IOX_SDI, seq[qn_output[i]][1]);
-		udelay(500);
-		gpio_direction_output(IOX_SHCP, 1);
-		udelay(500);
-	}
-
-	gpio_direction_output(IOX_STCP, 0);
-	udelay(500);
-	/*
-	  * shift register will be output to pins
-	  */
-	gpio_direction_output(IOX_STCP, 1);
-};
-
 #ifdef CONFIG_FEC_MXC
 static iomux_v3_cfg_t const fec1_pads[] = {
 	MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
-- 
1.9.1